[Gambas-user] Compilation AND Installation

[Gianluigi]

[0] http://gambaswiki.org/wiki/install#t2

2018-06-01 18:15 GMT+02:00 Gianluigi <bagonergi at gmail.com>:

> I wanted to help but unfortunately I only created confusion.
>
> However, the steps to compile are those indicated by me:
>
> First of all, we need to remove every trace of the previous Gambas from
> our OS.
> Then we need to have all the libraries installed as shown here [0]
> So we need to download Gambas through Tar or Git.
> Once we have in our home the Gambas folder, we enter the folder and give
> the commands:
> As a normal user:
>   ./reconf-all
>   ./configure -C
>   make
> And as root:
>   make install
>
> Better if we send the output error to a log file to get help in case of
> errors.
>
> Regards
> Gianluigi
>
>
> 2018-06-01 15:59 GMT+02:00 Gianluigi <bagonergi at gmail.com>:
>
>> ERRATA CORRIGE
>>
>> For cleaning the sudo command change it with yum.
>>
>> Warning: Or install from git or tar, you can not have both
>>
>> Regards
>> Gianluigi
>>
>> 2018-06-01 15:33 GMT+02:00 Gianluigi <bagonergi at gmail.com>:
>>
>>> The instructions for compiling Fedora [0] are obsolete.
>>> Gambas is no longer with SVN is now with Git should read here [1]
>>> Before installing you should give these commands to clean, suggested by
>>> Jussi Lahtinen:
>>> sudo rm -f /usr/local/bin/gbx3 /usr/local/bin/gbc3 /usr/local/bin/gba3
>>> /usr/local/bin/gbi3 /usr/local/bin/gbs3
>>> sudo rm -rf /usr/local/lib/gambas3
>>> sudo rm -rf /usr/local/share/gambas3
>>> sudo rm -f /usr/local/bin/gambas3
>>> sudo rm -f /usr/local/bin/gambas3.gambas
>>>
>>> sudo rm -f /usr/bin/gbx3 /usr/bin/gbc3 /usr/bin/gba3 /usr/bin/gbi3
>>> /usr/local/bin/gbs3
>>> sudo rm -rf /usr/lib/gambas3
>>> sudo rm -rf /usr/share/gambas3
>>> sudo rm -f /usr/bin/gambas3
>>> sudo rm -f /usr/bin/gambas3.gambas
>>>
>>> These are the steps for a first installation (note I do not know Fedora
>>> :-) it's all at your risk):
>>> 1 - Open terminal.
>>> 2 - Download with  #yum comand the libraries as suggested to SVN ( look
>>> here [0], I think they will not be enough)
>>>
>>> 3 - If you want the Master version you have to download Git:
>>> 3.1 - yum install git
>>> 3.2 - git clone --depth=1 https://gitlab.com/gambas/gambas.git
>>> gambasdevel
>>> 3.3 - cd gambasdevel
>>>
>>> 4 - If you want the stable from tar dawnload here [2]
>>>
>>> 4.1 - tar -zxvf gambas-3.11.3.tar.gz
>>> 4.2 - cd gambas-3.11.3
>>>
>>>
>>> 5 - ( ./reconf-all && ./configure -C ) > ~/Desktop/R_conf-Gambsdevel.log
>>> 2>&1
>>>
>>> Check the log file R_conf-Gambsdevel.log on the desktop, scroll to the
>>> bottom and see if you lack libraries, if you need to inform yourself in
>>> Fedora how to install them.
>>> Then completed the installation with:
>>> 6 - ( make && sudo make install ) > ~/Desktop/Make_Inst-Gambasdevel.log
>>> 2>&1
>>>
>>> And check if everything went well otherwise write to attach the log files
>>>
>>> Regards
>>> Gianluigi
>>>
>>> [0] http://gambaswiki.org/wiki/install/fedora#t11
>>> NOTE: Plus retrieving for fedora 17
>>>
>>> [1] http://gambaswiki.org/wiki/install#t4
>>>
>>> [2] https://gitlab.com/gambas/gambas/-/archive/3.11.3/gambas-3.1
>>> 1.3.tar.bz2
>>>
>>> 2018-06-01 14:27 GMT+02:00 Mayost Sharon <sharon at 455.co.il>:
>>>
>>>> /usr/bin/gambas3
>>>> is LINK TO
>>>> gambas3.gambas
>>>>
>>>> but gambas3.gambas is not found in my
>>>>
>>>>
>>>> For remembrance
>>>> I did COMPILE
>>>> I did not do the order
>>>> dnf install gambas3
>>>>
>>>> ---------- Original Message -----------
>>>> From: T Lee Davidson <t.lee.davidson at gmail.com>
>>>> To: user at lists.gambas-basic.org
>>>> Sent: Fri, 1 Jun 2018 08:18:56 -0400
>>>> Subject: Re: [Gambas-user] Compilation AND Installation
>>>>
>>>> > On my system, it is `/usr/bin/gambas3`
>>>> >
>>>> > --
>>>> > Lee
>>>> >
>>>> > On 06/01/2018 08:09 AM, Mayost Sharon wrote:
>>>> > > Hello
>>>> > >
>>>> > > fedora 28 workstation 64bit
>>>> > >
>>>> > > first i install
>>>> > > dnf groupinstall -y "C Development Tools and Libraries" "D
>>>> Development Tools and
>>>> > > Libraries" "Development Tools"
>>>> > >
>>>> > > I tried to compile according to the instructions
>>>> > >
>>>> > > I attach the output.txt file
>>>> > >
>>>> > > I see that there are new files such as:
>>>> > >
>>>> > > /bin/gba3  /bin/gbh3         /bin/gbi3  /bin/gbs3         /bin/gbw3
>>>> > > /bin/gbc3  /bin/gbh3.gambas  /bin/gbr3  /bin/gbs3.gambas  /bin/gbx3
>>>> > >
>>>> > > But I can not find how to run the IDE
>>>> > >
>>>> > > Thanks for the help
>>>> > >
>>>> > >
>>>> > > ----[ Gambas mailing-list is hosted by https://www.hostsharing.net
>>>> ]----
>>>> > >
>>>> >
>>>> > ----[ Gambas mailing-list is hosted by https://www.hostsharing.net
>>>> ]----
>>>> ------- End of Original Message -------
>>>>
>>>>
>>>> ----[ Gambas mailing-list is hosted by https://www.hostsharing.net
>>>> ]----
>>>>
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gambas-basic.org/pipermail/user/attachments/20180601/f1f3fbea/attachment.html>