[Gambas-user] Compilation AND Installation

[Gianluigi]

ERRATA CORRIGE

For cleaning the sudo command change it with yum.

Warning: Or install from git or tar, you can not have both

Regards
Gianluigi

2018-06-01 15:33 GMT+02:00 Gianluigi <bagonergi at gmail.com>:

> The instructions for compiling Fedora [0] are obsolete.
> Gambas is no longer with SVN is now with Git should read here [1]
> Before installing you should give these commands to clean, suggested by
> Jussi Lahtinen:
> sudo rm -f /usr/local/bin/gbx3 /usr/local/bin/gbc3 /usr/local/bin/gba3
> /usr/local/bin/gbi3 /usr/local/bin/gbs3
> sudo rm -rf /usr/local/lib/gambas3
> sudo rm -rf /usr/local/share/gambas3
> sudo rm -f /usr/local/bin/gambas3
> sudo rm -f /usr/local/bin/gambas3.gambas
>
> sudo rm -f /usr/bin/gbx3 /usr/bin/gbc3 /usr/bin/gba3 /usr/bin/gbi3
> /usr/local/bin/gbs3
> sudo rm -rf /usr/lib/gambas3
> sudo rm -rf /usr/share/gambas3
> sudo rm -f /usr/bin/gambas3
> sudo rm -f /usr/bin/gambas3.gambas
>
> These are the steps for a first installation (note I do not know Fedora
> :-) it's all at your risk):
> 1 - Open terminal.
> 2 - Download with  #yum comand the libraries as suggested to SVN ( look
> here [0], I think they will not be enough)
>
> 3 - If you want the Master version you have to download Git:
> 3.1 - yum install git
> 3.2 - git clone --depth=1 https://gitlab.com/gambas/gambas.git gambasdevel
> 3.3 - cd gambasdevel
>
> 4 - If you want the stable from tar dawnload here [2]
>
> 4.1 - tar -zxvf gambas-3.11.3.tar.gz
> 4.2 - cd gambas-3.11.3
>
>
> 5 - ( ./reconf-all && ./configure -C ) > ~/Desktop/R_conf-Gambsdevel.log
> 2>&1
>
> Check the log file R_conf-Gambsdevel.log on the desktop, scroll to the
> bottom and see if you lack libraries, if you need to inform yourself in
> Fedora how to install them.
> Then completed the installation with:
> 6 - ( make && sudo make install ) > ~/Desktop/Make_Inst-Gambasdevel.log
> 2>&1
>
> And check if everything went well otherwise write to attach the log files
>
> Regards
> Gianluigi
>
> [0] http://gambaswiki.org/wiki/install/fedora#t11
> NOTE: Plus retrieving for fedora 17
>
> [1] http://gambaswiki.org/wiki/install#t4
>
> [2] https://gitlab.com/gambas/gambas/-/archive/3.11.3/
> gambas-3.11.3.tar.bz2
>
> 2018-06-01 14:27 GMT+02:00 Mayost Sharon <sharon at 455.co.il>:
>
>> /usr/bin/gambas3
>> is LINK TO
>> gambas3.gambas
>>
>> but gambas3.gambas is not found in my
>>
>>
>> For remembrance
>> I did COMPILE
>> I did not do the order
>> dnf install gambas3
>>
>> ---------- Original Message -----------
>> From: T Lee Davidson <t.lee.davidson at gmail.com>
>> To: user at lists.gambas-basic.org
>> Sent: Fri, 1 Jun 2018 08:18:56 -0400
>> Subject: Re: [Gambas-user] Compilation AND Installation
>>
>> > On my system, it is `/usr/bin/gambas3`
>> >
>> > --
>> > Lee
>> >
>> > On 06/01/2018 08:09 AM, Mayost Sharon wrote:
>> > > Hello
>> > >
>> > > fedora 28 workstation 64bit
>> > >
>> > > first i install
>> > > dnf groupinstall -y "C Development Tools and Libraries" "D
>> Development Tools and
>> > > Libraries" "Development Tools"
>> > >
>> > > I tried to compile according to the instructions
>> > >
>> > > I attach the output.txt file
>> > >
>> > > I see that there are new files such as:
>> > >
>> > > /bin/gba3  /bin/gbh3         /bin/gbi3  /bin/gbs3         /bin/gbw3
>> > > /bin/gbc3  /bin/gbh3.gambas  /bin/gbr3  /bin/gbs3.gambas  /bin/gbx3
>> > >
>> > > But I can not find how to run the IDE
>> > >
>> > > Thanks for the help
>> > >
>> > >
>> > > ----[ Gambas mailing-list is hosted by https://www.hostsharing.net
>> ]----
>> > >
>> >
>> > ----[ Gambas mailing-list is hosted by https://www.hostsharing.net
>> ]----
>> ------- End of Original Message -------
>>
>>
>> ----[ Gambas mailing-list is hosted by https://www.hostsharing.net ]----
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gambas-basic.org/pipermail/user/attachments/20180601/d9a549f0/attachment.html>