[Gambas-user] Possible bug in IDE

[Willy Raets]

On do, 2014-10-09 at 01:42 +0200, Benoît Minisini wrote:
> Le 08/10/2014 23:15, T Lee Davidson a écrit :
> > Confirmed with v3.5.4. Except simply opening another project with
> > File->Open_project does not clear the incorrect filters. I have to Quit
> > and re-launch Gambas to clear them.
> >
> >
> > On 10/08/2014 10:53 AM, Willy Raets wrote:
> >> Try this at home and see what goes wrong.
> >> Both 3.5.4 and 3.5.90 (rev#6521) show this behaviour.
> >>
> >> 1. Open a project in IDE
> >> 2. In project browser
> >>     - right click 'Sources'
> >>     - select 'New'
> >>     - select 'Module'
> >>     - Click tab 'Existing'
> >>     - 'Gambas modules (*.module) is the correct filter set
> >> 3. Repeat step 2 for Class, Form and Report (if gb.report activated)
> >> All should be good so far and correct filters should be shown.
> >>
> >> 4. In Project browser
> >>     - right click 'Data'
> >>     - select 'New'
> >>     - select 'Image'
> >>     - click tab 'Existing'
> >>     - 'Gambas modules (*.module) is the WRONG filter set!!
> >> 5. Repeat step 4 for HTML file, Stylesheet, Javascript file and Other
> >> You see what goes wrong in the filter.
> >> Somehow the filters of Sources are kept.
> >>
> >> No to make it even odder try this:
> >> 1. Open ANOTHER project in IDE (important)
> >> 2. In Project browser
> >>     - right click 'Data'
> >>     - select 'New'
> >>     - select 'Image'
> >>     - click tab 'Existing'
> >>     - 'Images files (*.png,*jpg,..) is the correct filter set
> >> 3. Repeat step 4 for HTML file, Stylesheet, Javascript file and Other
> >> All should be good so far and correct filters should be shown.
> >>
> >> 4. In project browser
> >>     - right click 'Sources'
> >>     - select 'New'
> >>     - select 'Module'
> >>     - Click tab 'Existing'
> >>     - 'Images files (*.png,*jpg,..) is the WRONG filter set!!
> >> 5. Repeat step 2 for Class, Form and Report (if gb.report activated)
> >> You see what goes wrong in the filter.
> >> This time the filters of Data are kept.
> >>
> >> So, filters seem to depend on if you first right clicked 'Sources' or
> >> 'Data' in the Project browser.
> >>
> >
> 
> I fixed the behaviour of that dialog in revision #6522. If you can tell 
> me if it is ok for you...
> 

I can confirm it is fixed.

Thanks again.

-- 
Kind regards,

Willy (aka gbWilly)

http://gambasshowcase.org/
http://howtogambas.org
http://gambos.org