[Gambas-user] Configuration problems

Doug Hutcheson owlbrudder at gmail.com
Sun Jan 14 07:24:07 CET 2018


Thanks Patrik - I will give it a try,
Cheers,
Doug

On Sun, 2018-01-14 at 07:14 +0100, Patrik Karlsson wrote:
> I recently had a similar/same? problem with SDL2.https://lists.gambas
> -basic.org/pipermail/user/2018-January/062547.html
> It was due to changes in SDL and the solution for me was to edit the
> gambas source before building it.
> In gb.sdl2/src/audio/main.c, replace FLUIDSYNTH with MID like so:
> https://git.archlinux.org/svntogit/community.git/tree/trunk/sdl2_mixe
> r.diff?h=packages/gambas3
> 
> 
> 
> 2018-01-14 3:20 GMT+01:00 Doug Hutcheson <owlbrudder at gmail.com>:
> > On Sun, 2018-01-14 at 03:37 +0200, Jussi Lahtinen wrote:
> > > They aren't mandatory components. You can compile Gambas wihtout
> > > them. However if you want to use jit or sdl you need to resolve
> > > those issues. Anyone to be able to help further you need to tell
> > > us what is your system exactly.
> > > 
> > > 
> > > Jussi
> > > 
> > > On Sun, Jan 14, 2018 at 2:23 AM, Doug Hutcheson <owlbrudder at gmail
> > > .com> wrote:
> > > > Hi everyone.
> > > > 
> > > > 
> > > > 
> > > > I have been trying to get my configuration correct. Everything
> > > > works,
> > > > 
> > > > but at the end of ./configure -C I see this:
> > > > 
> > > > 
> > > > 
> > > > || THESE COMPONENTS ARE DISABLED:
> > > > 
> > > > || - gb.jit
> > > > 
> > > > || - gb.sdl2
> > > > 
> > > > || - gb.sdl2.audio
> > > > 
> > > > 
> > > > 
> > > > I read the wiki at http://gambaswiki.org/wiki/install#t6 and
> > > > changed my
> > > > 
> > > > configure command to 'env LLVM-CONFIG=llvm-config-3.5
> > > > ./configure -C',
> > > > 
> > > > but the problem is still there.
> > > > 
> > > > 
> > > > 
> > > > The wiki page suggests looking in the INSTALL file for more
> > > > 
> > > > configuration suggestions, but the INSTALL file just says to
> > > > refer to
> > > > 
> > > > the wiki.
> > > > 
> > > > 
> > > > 
> > > > Should I try to resolve these issues and, if so, how?
> > > > 
> > > > 
> > > > 
> > > > Thanks for any help,
> > > > 
> > > > Doug
> > > > 
> > > > 
> > > > 
> > > > --------------------------------------------------
> > > > 
> > > > 
> > > > 
> > > > This is the Gambas Mailing List
> > > > 
> > > > https://lists.gambas-basic.org/listinfo/user
> > > > 
> > > > 
> > > > 
> > > > Hosted by https://www.hostsharing.net
> > > > 
> > > 
> > > --------------------------------------------------
> > > 
> > > This is the Gambas Mailing List
> > > https://lists.gambas-basic.org/listinfo/user
> > > 
> > > Hosted by https://www.hostsharing.net
> > 
> > Thanks Jussi. Here is my system info:
> > 
> > [System]
> > Gambas=3.10.90 ce6d6e7e9 (master)
> > OperatingSystem=Linux
> > Kernel=4.14.13-300.fc27.x86_64
> > Architecture=x86_64
> > Distribution=redhat Fedora release 27 (Twenty Seven)
> > Desktop=GNOME
> > Theme=Gtk
> > Language=en_AU.UTF-8
> > Memory=15860M
> > 
> > [Libraries]
> > Cairo=libcairo.so.2.11510.0
> > DBus=libdbus-1.so.3.19.3
> > GStreamer=libgstreamer-1.0.so.0.1204.0
> > GTK+2=libgtk-x11-2.0.so.0.2400.31
> > OpenGL=libGL.so.1.0.0
> > SQLite=libsqlite3.so.0.8.6
> > 
> > [Environment]
> > BASH_FUNC_module%%=() {  eval `/usr/bin/modulecmd bash $*`
> > }
> > BASH_FUNC_scl%%=() {  if [ "$1" = "load" -o "$1" = "unload" ]; then
> >  eval "module $@";
> >  else
> >  /usr/bin/scl "$@";
> >  fi
> > }
> > COLORTERM=truecolor
> > CVS_RSH=ssh
> > DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus
> > DESKTOP_SESSION=gnome-xorg
> > DISPLAY=:0
> > GB_GUI=gb.qt4
> > GDMSESSION=gnome-xorg
> > GDM_LANG=en_AU.UTF-8
> > GJS_DEBUG_OUTPUT=stderr
> > GJS_DEBUG_TOPICS=JS ERROR;JS LOG
> > GNOME_DESKTOP_SESSION_ID=this-is-deprecated
> > HISTCONTROL=ignoredups
> > HISTSIZE=1000
> > HOME=<home>
> > HOSTNAME=<hostname>
> > IMSETTINGS_INTEGRATE_DESKTOP=yes
> > IMSETTINGS_MODULE=none
> > JOURNAL_STREAM=9:44770
> > KDEDIRS=/usr
> > LANG=en_AU.UTF-8
> > LESSOPEN=||/usr/bin/lesspipe.sh %s
> > LOADEDMODULES=python-sphinx/python3-sphinx
> > LOGNAME=<user>
> > LS_COLORS=rs=0:di=38;5;33:ln=38;5;51:mh=00:pi=40;38;5;11:so=38;5;13
> > :do=38;5;5:bd=48;5;232;38;5;11:cd=48;5;232;38;5;3:or=48;5;232;38;5;
> > 9:mi=01;05;37;41:su=48;5;196;38;5;15:sg=48;5;11;38;5;16:ca=48;5;196
> > ;38;5;226:tw=48;5;10;38;5;16:ow=48;5;10;38;5;21:st=48;5;21;38;5;15:
> > ex=38;5;40:*.tar=38;5;9:*.tgz=38;5;9:*.arc=38;5;9:*.arj=38;5;9:*.ta
> > z=38;5;9:*.lha=38;5;9:*.lz4=38;5;9:*.lzh=38;5;9:*.lzma=38;5;9:*.tlz
> > =38;5;9:*.txz=38;5;9:*.tzo=38;5;9:*.t7z=38;5;9:*.zip=38;5;9:*.z=38;
> > 5;9:*.Z=38;5;9:*.dz=38;5;9:*.gz=38;5;9:*.lrz=38;5;9:*.lz=38;5;9:*.l
> > zo=38;5;9:*.xz=38;5;9:*.zst=38;5;9:*.tzst=38;5;9:*.bz2=38;5;9:*.bz=
> > 38;5;9:*.tbz=38;5;9:*.tbz2=38;5;9:*.tz=38;5;9:*.deb=38;5;9:*.rpm=38
> > ;5;9:*.jar=38;5;9:*.war=38;5;9:*.ear=38;5;9:*.sar=38;5;9:*.rar=38;5
> > ;9:*.alz=38;5;9:*.ace=38;5;9:*.zoo=38;5;9:*.cpio=38;5;9:*.7z=38;5;9
> > :*.rz=38;5;9:*.cab=38;5;9:*.wim=38;5;9:*.swm=38;5;9:*.dwm=38;5;9:*.
> > esd=38;5;9:*.jpg=38;5;13:*.jpeg=38;5;13:*.mjpg=38;5;13:*.mjpeg=38;5
> > ;13:*.gif=38;5;13:*.bmp=38;5;13:*.pbm=38;5;13:*.pgm=38;5;13:*.ppm=3
> > 8;5;13:*.tga=38;5;13:*.xbm=38;5;13:*.xpm=38;5;13:*.tif=38;5;13:*.ti
> > ff=38;5;13:*.png=38;5;13:*.svg=38;5;13:*.svgz=38;5;13:*.mng=38;5;13
> > :*.pcx=38;5;13:*.mov=38;5;13:*.mpg=38;5;13:*.mpeg=38;5;13:*.m2v=38;
> > 5;13:*.mkv=38;5;13:*.webm=38;5;13:*.ogm=38;5;13:*.mp4=38;5;13:*.m4v
> > =38;5;13:*.mp4v=38;5;13:*.vob=38;5;13:*.qt=38;5;13:*.nuv=38;5;13:*.
> > wmv=38;5;13:*.asf=38;5;13:*.rm=38;5;13:*.rmvb=38;5;13:*.flc=38;5;13
> > :*.avi=38;5;13:*.fli=38;5;13:*.flv=38;5;13:*.gl=38;5;13:*.dl=38;5;1
> > 3:*.xcf=38;5;13:*.xwd=38;5;13:*.yuv=38;5;13:*.cgm=38;5;13:*.emf=38;
> > 5;13:*.ogv=38;5;13:*.ogx=38;5;13:*.aac=38;5;45:*.au=38;5;45:*.flac=
> > 38;5;45:*.m4a=38;5;45:*.mid=38;5;45:*.midi=38;5;45:*.mka=38;5;45:*.
> > mp3=38;5;45:*.mpc=38;5;45:*.ogg=38;5;45:*.ra=38;5;45:*.wav=38;5;45:
> > *.oga=38;5;45:*.opus=38;5;45:*.spx=38;5;45:*.xspf=38;5;45:
> > MAIL=/var/spool/mail/<user>
> > MODULEPATH=/etc/scl/modulefiles:/etc/scl/modulefiles:/usr/share/Mod
> > ules/modulefiles:/etc/modulefiles:/usr/share/modulefiles
> > MODULESHOME=/usr/share/Modules
> > OLDPWD=<home>/Downloads/MySql
> > PATH=/usr/libexec/python3-sphinx:/usr/lib64/qt-
> > 3.3/bin:/usr/lib64/ccache:/usr/local/bin:/usr/local/sbin:/usr/bin:/
> > usr/sbin:<home>/.local/bin:<home>/bin
> > PWD=<home>/Downloads/Gambas/gambasdevel
> > QTDIR=/usr/lib64/qt-3.3
> > QTINC=/usr/lib64/qt-3.3/include
> > QTLIB=/usr/lib64/qt-3.3/lib
> > QT_IM_MODULE=xim
> > SESSION_MANAGER=local/unix:@/tmp/.ICE-
> > unix/7782,unix/unix:/tmp/.ICE-unix/7782
> > SHELL=/bin/bash
> > SHLVL=2
> > SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
> > SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
> > S_COLORS=auto
> > TERM=xterm-256color
> > TZ=:/etc/localtime
> > USER=<user>
> > USERNAME=<user>
> > VTE_VERSION=5002
> > WINDOWID=79691782
> > WINDOWPATH=2
> > XAUTHORITY=/run/user/1000/gdm/Xauthority
> > XDG_CURRENT_DESKTOP=GNOME
> > XDG_DATA_DIRS=<home>/.local/share/flatpak/exports/share/:/var/lib/f
> > latpak/exports/share/:/usr/local/share/:/usr/share/
> > XDG_MENU_PREFIX=gnome-
> > XDG_RUNTIME_DIR=/run/user/1000
> > XDG_SEAT=seat0
> > XDG_SESSION_DESKTOP=gnome-xorg
> > XDG_SESSION_ID=2
> > XDG_SESSION_TYPE=x11
> > XDG_VTNR=2
> > XMODIFIERS=@im=none
> > _=/usr/bin/gambas3
> > _LMFILES_=/usr/share/modulefiles/python-sphinx/python3-sphinx
> > 
> > 
> > --------------------------------------------------
> > 
> > 
> > 
> > This is the Gambas Mailing List
> > 
> > https://lists.gambas-basic.org/listinfo/user
> > 
> > 
> > 
> > Hosted by https://www.hostsharing.net
> > 
> > 
> 
> --------------------------------------------------
> 
> This is the Gambas Mailing List
> https://lists.gambas-basic.org/listinfo/user
> 
> Hosted by https://www.hostsharing.net
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gambas-basic.org/pipermail/user/attachments/20180114/dc11cc7a/attachment-0001.html>


More information about the User mailing list