[Gambas-user] using events of serial ports for reading how_?

Tony Morehen tmorehen at ajm-software.com
Mon Aug 13 21:22:23 CEST 2018


I give up trying to help you.  I asked 3 questions.  You ignored two and 
said there is no point in answering the other.  How can anyone help you 
when you refuse to provide any information?

It's like the ODBC problems you've been yelling and screaming about.  
You don't even give basic information like what odbc driver you are 
using, including version.

On 2018-08-13 02:48 PM, PICCORO McKAY Lenz wrote:
> well it's a fiscal printer, so there's no sense in tell you taht it's 
> a epson dot matrix
>
> i put more delay and now event raised! i mean, 0.5 ms in main module 
> event in the property event!
> and 0.1 ms in the read function..
>
> but if i put tyhe delay in any other place that are not in the main 
> there's no read event raised!
>
> ans somethings does not happened (very rare times)
>
> Lenz McKAY Gerardo (PICCORO)
> http://qgqlochekone.blogspot.com
>
> 2018-08-13 13:52 GMT-04:00 Tony Morehen <tmorehen at ajm-software.com 
> <mailto:tmorehen at ajm-software.com>>:
>
>     Perhaps you could upload the latest version of your code?
>
>     What printer are you testing this against?
>
>     Have you tried connecting via a terminal program to your printer? 
>     This will double check your connection settings and let you see
>     the actual response to the commands you are sending.  Another test
>     is to use a serial port monitor or sniffer to view your program's
>     serial port activity.
>
>
>     On 2018-08-13 11:35 AM, PICCORO McKAY Lenz wrote:
>>
>>     2018-08-13 11:16 GMT-04:00 T Lee Davidson
>>     <t.lee.davidson at gmail.com <mailto:t.lee.davidson at gmail.com>>:
>>
>>         You create the printer object, open its port, write to the
>>         printer requesting a status report, and then *immediately* you
>>
>>         manually read the response. After that, for some odd reason,
>>         you read the "dataread" property twice, and then the program
>>         ends.
>>
>>      ok but remove later those calls and does not triggered the read
>>     event!, inclusivelly if i put a loop in the main module that
>>     waiuth "something"
>>
>>         If you don't call the "rp" function, the program drops
>>         through the two "dataread" property reads and ends. When did
>>         you expect
>>         the _Read event would have a chance to be raised?
>>
>>     was just a experiment, i removed in furter test as i said
>>
>>         Not sure exactly what you mean with that statement, but it
>>         may be the very idea I am trying to impress upon you. Your manual
>>         read subroutine gives the printer 500 milliseconds to
>>         respond. Why don't you give the Main module at least 500
>>         milliseconds to
>>         allow the printer to respond and raise the _Read event?
>>
>>     i put a loop into as i said in the previous paragraph, but still
>>     does not happened!
>>
>>         Or, why not use a semaphore that is visible to the Main
>>         module and loop until the _Read event has had an opportunity
>>         to fill the
>>         "databuffer"?
>>
>>     oh, of course was working in this way, was my first code, ok
>>     great but i wish to deal with the read event ..
>>
>>         You may not have specified that the SerialPort stream should
>>         be watched, but it would be logical that Gambas automatically
>>         WATCHes a SerialPort in order to be be able to raise the
>>         _Read event. (http://gambaswiki.org/wiki/lang/open
>>         <http://gambaswiki.org/wiki/lang/open>)
>>
>>      yeah yeah, when i said "hang at end" i mean that with gambas 3.8
>>     when last sentence executed the programs ends normally, with 3.11
>>     the programs "seems end" but the "play" button of the ide still
>>     are deactivate and the ide indicates program does not end...
>>
>>
>>
>>     ----[ Gambas mailing-list is hosted byhttps://www.hostsharing.net  ]----
>
>
>
>     ----[ Gambas mailing-list is hosted by https://www.hostsharing.net
>     ]----
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.gambas-basic.org/pipermail/user/attachments/20180813/bdbc820f/attachment.html>


More information about the User mailing list