[Gambas-user] hardware requirments?

PICCORO McKAY Lenz mckaygerhard at gmail.com
Sun Dec 10 12:47:04 CET 2017


2017-12-10 4:39 GMT-04:00 Gianluigi <bagonergi at gmail.com>:

> Here (Gambas-it) there were discussions that would make us think otherwise.
> Sometimes Mint gives different results.
> Taking a test does not cost much effort and removes any doubt.
>
jajaja never mind. witn a winbuntu derivative never will work..

use a kernel with no so many up to date.. a kernel that fith the hardware

wrong thinking that the most recent its the better



>
> Regards
> Gianluigi
>
> 2017-12-10 2:03 GMT+01:00 Jussi Lahtinen <jussi.lahtinen at gmail.com>:
>
>> Interesting, then I would guess the fault is not on Linux Mint either...
>> their repos contain pretty much the same stuff.
>> But hard to say without testing... or knowing the actual error message.
>>
>>
>> Jussi
>>
>>
>> On Sat, Dec 9, 2017 at 11:24 PM, Gianluigi <bagonergi at gmail.com> wrote:
>>
>>> Yes :-)
>>>
>>> [System]
>>> Gambas=3.10
>>> OperatingSystem=Linux
>>> Kernel=4.4.0-103-generic
>>> Architecture=x86
>>> Distribution=Ubuntu 16.04.3 LTS
>>> Desktop=XFCE
>>> Theme=Cleanlooks
>>> Language=it_IT.UTF-8
>>> Memory=3018M
>>>
>>> Regards
>>> Gianluigi
>>>
>>>
>>>
>>>
>>> 2017-12-09 20:10 GMT+01:00 Jussi Lahtinen <jussi.lahtinen at gmail.com>:
>>>
>>>> Have you actually tested that with 32bit version?
>>>>
>>>>
>>>> Jussi
>>>>
>>>> On Sat, Dec 9, 2017 at 4:11 PM, Gianluigi <bagonergi at gmail.com> wrote:
>>>>
>>>>> A possible solution that allows installing 3.10 from PPA is Xubuntu
>>>>> 16.04
>>>>>
>>>>> Regards
>>>>> Gianluigi
>>>>>
>>>>> 2017-12-08 19:27 GMT+01:00 PICCORO McKAY Lenz <mckaygerhard at gmail.com>
>>>>> :
>>>>>
>>>>>> the problem its the winbuntu derived distro mint..
>>>>>>
>>>>>> i installed gambas in the very older eeepc asus with 2G disk ssd
>>>>>> internal, 512Mb ram and geode CPU 800MHz perfectly..
>>>>>>
>>>>>> but recent stupid linuxes (including recent kernel) now removed a lot
>>>>>> of support for older hardware lest take a example to xorg:
>>>>>>
>>>>>> since 7.3 xorg does not support intel i810 complety, lie to said that
>>>>>> its supported due that chip does not offer 32bit dept only 16bit "true
>>>>>> color" so newer xorg does not complety provide all the chip capabilities
>>>>>> so if you have intel 810 based chip and wants DIR and opengl, xorg
>>>>>> must be fewer rather thant 7.2  so an older linux must be used..
>>>>>>
>>>>>> in my case i backporte gambas for older linuxes.. like debian lenny
>>>>>> and squeeze perfectly.. of course, thanks to benoit that still does not
>>>>>> "up" the requerimients...
>>>>>>
>>>>>> Lenz McKAY Gerardo (PICCORO)
>>>>>> http://qgqlochekone.blogspot.com
>>>>>>
>>>>>> 2017-12-08 13:47 GMT-04:00 Tobias Boege <taboege at gmail.com>:
>>>>>>
>>>>>>> On Fri, 08 Dec 2017, mikeB wrote:
>>>>>>> > here's what my friend replied.....
>>>>>>> > Installing Mint 18.3 on Old & New PC's works OK.
>>>>>>> > Plenty of disks space (250GB SATA).
>>>>>>> > Plenty of memory (8GB).
>>>>>>> > Then add the ppa:gambas-team repo source.
>>>>>>> > Then apt-get update & then install gambas3.
>>>>>>> > Works ok on new PC's, but fails install on old PC's.
>>>>>>> > *Major difference is old CPU & Mobo.*
>>>>>>> > Works /w AMD APU's & FX CPU's.
>>>>>>> > Fails on Old PC's /w AMD Athlon CPU's.
>>>>>>> > Interesting that installing Gambas 3.8.4 on the Old PC's works.
>>>>>>> > Only Gambas 3.10 fails to install on the Old PC's.
>>>>>>> >
>>>>>>>
>>>>>>> A possibly relevant difference between those systems is that AMD
>>>>>>> Athlons
>>>>>>> are 32 bit, unless I'm mistaken. Maybe some dependencies are
>>>>>>> outdated for
>>>>>>> that architecture.
>>>>>>>
>>>>>>> Anyway it would be time to provide some real error messages. If it's
>>>>>>> the
>>>>>>> bitness or too high version requirements for some dependencies that
>>>>>>> came
>>>>>>> since 3.8.4, the package manager should be able to say that.
>>>>>>>
>>>>>>> Regards,
>>>>>>> Tobi
>>>>>>>
>>>>>>> --
>>>>>>> "There's an old saying: Don't change anything... ever!" -- Mr. Monk
>>>>>>>
>>>>>>> --------------------------------------------------
>>>>>>>
>>>>>>> This is the Gambas Mailing List
>>>>>>> https://lists.gambas-basic.org/listinfo/user
>>>>>>>
>>>>>>> Hosted by https://www.hostsharing.net
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --------------------------------------------------
>>>>>>
>>>>>> This is the Gambas Mailing List
>>>>>> https://lists.gambas-basic.org/listinfo/user
>>>>>>
>>>>>> Hosted by https://www.hostsharing.net
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --------------------------------------------------
>>>>>
>>>>> This is the Gambas Mailing List
>>>>> https://lists.gambas-basic.org/listinfo/user
>>>>>
>>>>> Hosted by https://www.hostsharing.net
>>>>>
>>>>>
>>>>
>>>>
>>>> --------------------------------------------------
>>>>
>>>> This is the Gambas Mailing List
>>>> https://lists.gambas-basic.org/listinfo/user
>>>>
>>>> Hosted by https://www.hostsharing.net
>>>>
>>>>
>>>
>>>
>>> --------------------------------------------------
>>>
>>> This is the Gambas Mailing List
>>> https://lists.gambas-basic.org/listinfo/user
>>>
>>> Hosted by https://www.hostsharing.net
>>>
>>>
>>
>>
>> --------------------------------------------------
>>
>> This is the Gambas Mailing List
>> https://lists.gambas-basic.org/listinfo/user
>>
>> Hosted by https://www.hostsharing.net
>>
>>
>
>
> --------------------------------------------------
>
> This is the Gambas Mailing List
> https://lists.gambas-basic.org/listinfo/user
>
> Hosted by https://www.hostsharing.net
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gambas-basic.org/pipermail/user/attachments/20171210/3e3b7897/attachment.html>


More information about the User mailing list