[Gambas-user] Problem compiling projects

[Peter Roc]

   A bit with a red face right now... Tobias, I followed your tip and did a
   compille all before running the project, everything working now. A big
   thanks and sorry for the annoyance. If I don't email again, it means that
   everything is working in Mint as well. Cheers,

   Peter

   Sent: Sunday, February 14, 2016 at 3:45 PM
   From: "Peter Roc" <peteroc at ...178...>
   To: gambas-user at lists.sourceforge.net
   Subject: Re: [Gambas-user] Problem compiling projects
   F7 and Alt+F7 it's the same here. About the <project>.gambas file, until
   this problem surfaced I can assure you that the files were created.
   Typing from the Lubuntu (x64, it was the only available at home), and same
   problem. Tested removing the .gambas dir and its created fine with all the
   classes there.
   The test project is working now. I'm gonna create fresh forms and copy
   everything from the older ones and see if it fixes my problem (did it once
   with a form that was misbehaving and it worked). After that I will reinstall
   Mint and see if the problem persists.
   Peter
   Sent: Sunday, February 14, 2016 at 3:23 PM
   From: "Tobias Boege" <taboege at ...626...>
   To: "mailing list for gambas users" <gambas-user at lists.sourceforge.net>
   Subject: Re: [Gambas-user] Problem compiling projects
   On Sun, 14 Feb 2016, Peter Roc wrote:
   >
   > Hi Tobias. Thank you for your reply.
   >
   > Yes, I did make uninstall. By stopped I mean, everything worked fine, it's
   > just than when pressing F7 nothing happens. Going to the project folder
   > there is no <project>.gambas file. Alt+F7 results in some warnings but
   > nothing special, they were there before the problem.
   >
   On my system F7 is mapped to "Compile" and Alt+F7 to "Compile all". I think
   it's the same at yours. Compiling a project mostly creates compiled files in
   the hidden ".gambas" directory in your project. It does *not* create an exe-
   cutable archive (<project>.gambas file). "Compile all" is similar in that it
   compiles everything from scratch, even if some classes have not been
   modified since last compilation.
   Usually there is no visual output or waiting time (except maybe for very
   large projects) for project compilation. You can check if a compilation
   happened by going to your project directory in a file manager, deleting the
   hidden ".gambas" directory, then hitting "Compile all" in the IDE. If after
   that the ".gambas" directory is present and filled with your classes, then
   it works.
   > Because I have the /home dir in a separate partition, I made an reinstall,
   > Linux Mint 17 Rosa on my case. Problem persists, but now it's worse.
   > Creating a new project, a simple form with a button, result that when
   > pressing the run button (at the IDE) only the form shows up but not the
   > button. I will try with a different distro, lubuntu, and check if the
   > problem persists.
   >
   > For the record: Linux Mint 17 Rosa, ppa stable
   >
   If the problem persists after you reinstalled the whole system, it must be
   something wrong with the project (meta)data... Can you send a misbehaving
   project to the list?
   As a general advice, if you switch back and forth between Gambas versions,
   the first thing you should do is "Compile all" each project that was
   compiled with a different version of Gambas. Only then you should run it.
   But I doubt that this would fix your current problem.
   Regards,
   Tobi
   --
   "There's an old saying: Don't change anything... ever!" -- Mr. Monk
   ----------------------------------------------------------------------------
   --
   Site24x7 APM Insight: Get Deep Visibility into Application Performance
   APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
   Monitor end-to-end web transactions and take corrective actions now
   Troubleshoot faster and improve end-user experience. Signup Now!
   [1][1]http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
   _______________________________________________
   Gambas-user mailing list
   Gambas-user at lists.sourceforge.net
   [2][2]https://lists.sourceforge.net/lists/listinfo/gambas-user
   References
   1. [3]http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
   2. [4]https://lists.sourceforge.net/lists/listinfo/gambas-user
   ----------------------------------------------------------------------------
   --
   Site24x7 APM Insight: Get Deep Visibility into Application Performance
   APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
   Monitor end-to-end web transactions and take corrective actions now
   Troubleshoot faster and improve end-user experience. Signup Now!
   [5]http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
   _______________________________________________
   Gambas-user mailing list
   Gambas-user at lists.sourceforge.net
   [6]https://lists.sourceforge.net/lists/listinfo/gambas-user

References

   1. http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
   2. https://lists.sourceforge.net/lists/listinfo/gambas-user
   3. http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
   4. https://lists.sourceforge.net/lists/listinfo/gambas-user
   5. http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
   6. https://lists.sourceforge.net/lists/listinfo/gambas-user