[Gambas-user] printer.paper

Fabien Bodard gambas.fr at ...626...
Sun Jul 13 16:54:13 CEST 2014


2014-07-13 16:27 GMT+02:00 Karl Reinl <karl.reinl at ...9...>:
> Am Sonntag, den 13.07.2014, 14:49 +0200 schrieb Fabien Bodard:
>> they are hard coded...
>>
>> 2014-07-13 0:33 GMT+02:00 Karl Reinl <karl.reinl at ...9...>:
>> > Am Sonntag, den 13.07.2014, 00:23 +0200 schrieb Benoît Minisini:
>> >> Le 13/07/2014 00:18, Karl Reinl a écrit :
>> >> > Salut,
>> >> >
>> >> > do I have a chance to read out printer.paper sizes within gambas?
>> >> >
>> >>
>> >> No, but they normally should be standard paper sizes (i.e. A4 is always
>> >> 210mm x 297mm).
>> >>
>> > Ok, not good asked.
>> >
>> > do I have a chance to read out paper formats available for a printer, as
>> > used as list in printer.config dialog stored in printer.paper?
>> > --
>> > Amicalement
>> > Charlie
>
> Thanks Fabien,
>
> yes, that what I also found out.
> gambas3 only know "A3","A4","A5","B5","Letter","Executive","Legal", all
> others are "Custom" with PaperHeight and PaperWidth set.
>
> I digged deeper and found out, for qt4:
>
> - you can't set paper to 0="Custom" (you get default Paper, here "A4")
>
> - if you write to Printer.PaperHeight and/or Printer.PaperWidth, Paper
>   change to 0="Custom"
>
> - after Printer.configure() the printer object knows all his properties,
>   as they where made during Printer.configure, but not Printer.NumCopies
>   it is reset to 1

that's why i've began to redraw the configure for report

> --
> Amicalement
> Charlie
>
>
> ------------------------------------------------------------------------------
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user



-- 
Fabien Bodard




More information about the User mailing list