From vuott at ...325...  Sat Jun  1 01:17:34 2013
From: vuott at ...325... (Ru Vuott)
Date: Sat, 1 Jun 2013 00:17:34 +0100 (BST)
Subject: [Gambas-user] If Markdown comments of a component aren't visible in
	a project.
Message-ID: <1370042254.16396.YahooMailClassic@...3065...>

Hello,

I wrote a component: "gb.midi", all in Gambas, for playing the Midi files.
Well, for each of its properties and functions, I wrote a comment via "markdown".
But when I call a gb.midi function or property in a project, those Markdown comments do not appear in respective popup guide. This shows text: "page not available."

Where could be the error?

Thanks
vuott



From gambas at ...1...  Sat Jun  1 02:26:44 2013
From: gambas at ...1... (=?ISO-8859-1?Q?Beno=EEt_Minisini?=)
Date: Sat, 01 Jun 2013 02:26:44 +0200
Subject: [Gambas-user] PYTHONPATH equivalent?
In-Reply-To: <CABGO1xg2Us-qfipE2LXm3JXb5XGTLi94z+yQg12PwnE-PFe9VA@...627...>
References: <CABGO1xggsHSoM08AkFwWYkYaJhdkD7rtJ=YqbNu7--kWaC5pFQ@...627...>
	<51A8FBCB.9000802@...1...>
	<51A9002C.4020402@...1...>
	<CABGO1xg2Us-qfipE2LXm3JXb5XGTLi94z+yQg12PwnE-PFe9VA@...627...>
Message-ID: <51A93FC4.90400@...1...>

Le 31/05/2013 23:54, Antonio S?nchez a ?crit :
> What bothers is not only the fact that when  I choose the white colour in
> the IDE of GAMBAS, it appears orange, but the text, that instead of being
> black, it's blur. It seems to have an onion layer on the grid.

This was a Gambas 3.3 fixed in Gambas 3.4. Can you check your Gambas 
version by running "gbx3 -V" in a terminal?

>
> Could you watch the video-report about gb.gui and qt.gui?
> https://www.youtube.com/watch?v=hwDom_WBdCU&hd=1

I will look at it.

-- 
Beno?t Minisini



From gambas at ...1...  Sat Jun  1 02:35:31 2013
From: gambas at ...1... (=?ISO-8859-1?Q?Beno=EEt_Minisini?=)
Date: Sat, 01 Jun 2013 02:35:31 +0200
Subject: [Gambas-user] PYTHONPATH equivalent?
In-Reply-To: <51A93FC4.90400@...1...>
References: <CABGO1xggsHSoM08AkFwWYkYaJhdkD7rtJ=YqbNu7--kWaC5pFQ@...627...>
	<51A8FBCB.9000802@...1...>
	<51A9002C.4020402@...1...>
	<CABGO1xg2Us-qfipE2LXm3JXb5XGTLi94z+yQg12PwnE-PFe9VA@...627...>
	<51A93FC4.90400@...1...>
Message-ID: <51A941D3.8020906@...1...>

Le 01/06/2013 02:26, Beno?t Minisini a ?crit :
> Le 31/05/2013 23:54, Antonio S?nchez a ?crit :
>> What bothers is not only the fact that when  I choose the white colour in
>> the IDE of GAMBAS, it appears orange, but the text, that instead of being
>> black, it's blur. It seems to have an onion layer on the grid.
>
> This was a Gambas 3.3 fixed in Gambas 3.4. Can you check your Gambas
> version by running "gbx3 -V" in a terminal?
>
>>
>> Could you watch the video-report about gb.gui and qt.gui?
>> https://www.youtube.com/watch?v=hwDom_WBdCU&hd=1
>
> I will look at it.
>

OK, I saw it. As you are not using KDE, that annoying color may come 
from the Qt4 configuration that should have been automatically generated.

Can you run the Qt4 configuration program to check the palette and show 
me what it is? On Ubuntu, you have to install the 'qt4-qtconfig' package 
and then run the 'qtconfig-qt4' program (ubuntu brain fuck...).

-- 
Beno?t Minisini



From introlinux at ...626...  Sat Jun  1 09:18:41 2013
From: introlinux at ...626... (=?ISO-8859-1?Q?Antonio_S=E1nchez?=)
Date: Sat, 1 Jun 2013 09:18:41 +0200
Subject: [Gambas-user] PYTHONPATH equivalent?
In-Reply-To: <51A941D3.8020906@...1...>
References: <CABGO1xggsHSoM08AkFwWYkYaJhdkD7rtJ=YqbNu7--kWaC5pFQ@...627...>
	<51A8FBCB.9000802@...1...>
	<51A9002C.4020402@...1...>
	<CABGO1xg2Us-qfipE2LXm3JXb5XGTLi94z+yQg12PwnE-PFe9VA@...627...>
	<51A93FC4.90400@...1...>
	<51A941D3.8020906@...1...>
Message-ID: <CABGO1xix7X31m8GhNtpsPGb--zDnb15BAw0_3c-=w=RTf9Td6g@...627...>

Ok, I've just installed qtconfig-qt4. What exact information do you need?


2013/6/1 Beno?t Minisini <gambas at ...1...>

> Le 01/06/2013 02:26, Beno?t Minisini a ?crit :
> > Le 31/05/2013 23:54, Antonio S?nchez a ?crit :
> >> What bothers is not only the fact that when  I choose the white colour
> in
> >> the IDE of GAMBAS, it appears orange, but the text, that instead of
> being
> >> black, it's blur. It seems to have an onion layer on the grid.
> >
> > This was a Gambas 3.3 fixed in Gambas 3.4. Can you check your Gambas
> > version by running "gbx3 -V" in a terminal?
> >
> >>
> >> Could you watch the video-report about gb.gui and qt.gui?
> >> https://www.youtube.com/watch?v=hwDom_WBdCU&hd=1
> >
> > I will look at it.
> >
>
> OK, I saw it. As you are not using KDE, that annoying color may come
> from the Qt4 configuration that should have been automatically generated.
>
> Can you run the Qt4 configuration program to check the palette and show
> me what it is? On Ubuntu, you have to install the 'qt4-qtconfig' package
> and then run the 'qtconfig-qt4' program (ubuntu brain fuck...).
>
> --
> Beno?t Minisini
>
>
> ------------------------------------------------------------------------------
> Get 100% visibility into Java/.NET code with AppDynamics Lite
> It's a free troubleshooting tool designed for production
> Get down to code-level detail for bottlenecks, with <2% overhead.
> Download for free and get started troubleshooting in minutes.
> http://p.sf.net/sfu/appdyn_d2d_ap2
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>


From introlinux at ...626...  Sat Jun  1 09:29:01 2013
From: introlinux at ...626... (=?ISO-8859-1?Q?Antonio_S=E1nchez?=)
Date: Sat, 1 Jun 2013 09:29:01 +0200
Subject: [Gambas-user] PYTHONPATH equivalent?
In-Reply-To: <CABGO1xix7X31m8GhNtpsPGb--zDnb15BAw0_3c-=w=RTf9Td6g@...627...>
References: <CABGO1xggsHSoM08AkFwWYkYaJhdkD7rtJ=YqbNu7--kWaC5pFQ@...627...>
	<51A8FBCB.9000802@...1...>
	<51A9002C.4020402@...1...>
	<CABGO1xg2Us-qfipE2LXm3JXb5XGTLi94z+yQg12PwnE-PFe9VA@...627...>
	<51A93FC4.90400@...1...>
	<51A941D3.8020906@...1...>
	<CABGO1xix7X31m8GhNtpsPGb--zDnb15BAw0_3c-=w=RTf9Td6g@...627...>
Message-ID: <CABGO1xhsUKFbhnVczSANjn2boS5kvXxeVJKhfyjm_VXuD61aSA@...627...>

I can't found the palette default name or similar thing. I send you a
screenshot.


2013/6/1 Antonio S?nchez <introlinux at ...626...>

> Ok, I've just installed qtconfig-qt4. What exact information do you need?
>
>
> 2013/6/1 Beno?t Minisini <gambas at ...1...>
>
>> Le 01/06/2013 02:26, Beno?t Minisini a ?crit :
>> > Le 31/05/2013 23:54, Antonio S?nchez a ?crit :
>> >> What bothers is not only the fact that when  I choose the white colour
>> in
>> >> the IDE of GAMBAS, it appears orange, but the text, that instead of
>> being
>> >> black, it's blur. It seems to have an onion layer on the grid.
>> >
>> > This was a Gambas 3.3 fixed in Gambas 3.4. Can you check your Gambas
>> > version by running "gbx3 -V" in a terminal?
>> >
>> >>
>> >> Could you watch the video-report about gb.gui and qt.gui?
>> >> https://www.youtube.com/watch?v=hwDom_WBdCU&hd=1
>> >
>> > I will look at it.
>> >
>>
>> OK, I saw it. As you are not using KDE, that annoying color may come
>> from the Qt4 configuration that should have been automatically generated.
>>
>> Can you run the Qt4 configuration program to check the palette and show
>> me what it is? On Ubuntu, you have to install the 'qt4-qtconfig' package
>> and then run the 'qtconfig-qt4' program (ubuntu brain fuck...).
>>
>> --
>> Beno?t Minisini
>>
>>
>> ------------------------------------------------------------------------------
>> Get 100% visibility into Java/.NET code with AppDynamics Lite
>> It's a free troubleshooting tool designed for production
>> Get down to code-level detail for bottlenecks, with <2% overhead.
>> Download for free and get started troubleshooting in minutes.
>> http://p.sf.net/sfu/appdyn_d2d_ap2
>> _______________________________________________
>> Gambas-user mailing list
>> Gambas-user at lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/gambas-user
>>
>
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: qtconfig.jpg
Type: image/jpeg
Size: 259671 bytes
Desc: not available
URL: <http://lists.gambas-basic.org/pipermail/user/attachments/20130601/a25e3667/attachment.jpg>

From gambas at ...2524...  Sat Jun  1 10:33:20 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Sat, 01 Jun 2013 08:33:20 +0000
Subject: [Gambas-user] Issue 435 in gambas: Socket blocks events,
	timeout not used
Message-ID: <0-6813199134517018827-16400179665065536234-gambas=googlecode.com@...2524...>

Status: New
Owner: ----
Labels: Version Type-Bug Priority-Medium OpSys-Any Dist-Any Arch-Any  
Desktop-Any GUI-Any

New issue 435 by r... at ...1740...: Socket blocks events, timeout not used
http://code.google.com/p/gambas/issues/detail?id=435

1) Describe the problem.

Start Gambas3 ClientSocket example, and for host fill in an non-existing IP  
address, for example a private address from a range outside your own.
For example 192.168.171.1

Bug #1:
It's status stays on 'Looking up hostname' but it's past that part already.

The app does a request in syn_sent state, but doesn't get a SYN_SENT back  
because the IP isn't reachable.
$ netstat -an|grep 32340
tcp        0      1 192.168.178.80:50911    192.168.171.1:32340     SYN_SENT
This is ok but then you have:

Bug #2:
The app freezes / socket works in non-async mode, stops and blocking all  
events (in my application this was what I saw...)

Bug #3:
And doesn't time out after the (default?) timeout of 10 sec, but after a  
minute or longer.. Even if you specify a shorter .Timeout, it doesn't use  
it.

If you try this with Gambas2 ClientSocket example you see correctly 'Host  
Found. Connecting'...

It times out after the (default?) of 10 seconds.

And doesn't block the program, did try this with the ClientSocket example,  
but I know this from my own project.

2) GIVE THE FOLLOWING INFORMATIONS (if they are appropriate):

Version: TRUNK
Revision: r5686
[System]
OperatingSystem=Linux
Kernel=3.8.0-22-generic
Architecture=x86_64
Distribution=Ubuntu 13.04
Desktop=GNOME
Theme=QGtk
Language=en_US.UTF-8
Memory=7954M

[Libraries]
Curl=libcurl.so.4.3.0
GStreamer=libgstreamer-0.10.so.0.30.0
GTK+=libgtk-x11-2.0.so.0.2400.17
Qt4=libQtCore.so.4.8.4
SDL=libSDL-1.2.so.0.11.4
Poppler=libpoppler.so.28.0.0

3) Provide a little project that reproduces the bug or the crash.
See ClientSocket example.

4) If your project needs a database, try to provide it, or part of it.
NA

5) Explain clearly how to reproduce the bug or the crash.
See above

6) By doing that carefully, you have done 50% of the bug fix job!

IMPORTANT NOTE: if you encounter several different problems or bugs, (for
example, a bug in your project, and an interpreter crash while debugging
it), please create distinct issues!

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From ron at ...1740...  Sat Jun  1 10:33:58 2013
From: ron at ...1740... (Ron)
Date: Sat, 1 Jun 2013 10:33:58 +0200
Subject: [Gambas-user] Connect hang with latest revision
In-Reply-To: <51A7A2DB.4060701@...1...>
References: <CAM+S5npU-_Hq0eZU1Z=i6Fbxw1ZeRVvrch7b1NDO0PTqAAg9SA@...627...>
	<51A79E47.6050607@...1...>
	<CAM+S5nqDHU+7mk8yzS4JF-Qsq2-Ss+_=OCEOewjJZ9Ug+U4=jw@...627...>
	<51A7A2DB.4060701@...1...>
Message-ID: <CAM+S5nriwH6vSALXg-YSDGCC44pMFX6iNnAfna5o1JXocbUa7g@...627...>

Benoit,

It seems to be a Gambas3 thing all along... not latest revisions...
but I didn't see this until I specified a wrong IP address to connect
too in my project.
Also on the Raspberry Pi I saw this earlier, thinking... man that's a
slow device, now I know Gambas socket blocks everything when a host
cannot be reached..

I detected three bugs... and filled this bug report.
https://code.google.com/p/gambas/issues/detail?id=435

Regards,
Ron_2nd.

2013/5/30 Beno?t Minisini <gambas at ...1...>:
> Le 30/05/2013 20:56, Ron a ?crit :
>> Strange i updated two machines and they both hang at startup trying to
>> connect to a tcp socket.
>> Will downgrade tomorrow and try to isolate it.
>>
>> Regards,
>> Ron_2nd
>
> Do you have the old revision number before the hang?
>
> --
> Beno?t Minisini
>
> ------------------------------------------------------------------------------
> Introducing AppDynamics Lite, a free troubleshooting tool for Java/.NET
> Get 100% visibility into your production application - at no cost.
> Code-level diagnostics for performance bottlenecks with <2% overhead
> Download for free and get started troubleshooting in minutes.
> http://p.sf.net/sfu/appdyn_d2d_ap1
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user



From gambas at ...1...  Sat Jun  1 14:34:45 2013
From: gambas at ...1... (=?ISO-8859-1?Q?Beno=EEt_Minisini?=)
Date: Sat, 01 Jun 2013 14:34:45 +0200
Subject: [Gambas-user] PYTHONPATH equivalent?
In-Reply-To: <CABGO1xhsUKFbhnVczSANjn2boS5kvXxeVJKhfyjm_VXuD61aSA@...627...>
References: <CABGO1xggsHSoM08AkFwWYkYaJhdkD7rtJ=YqbNu7--kWaC5pFQ@...627...>
	<51A8FBCB.9000802@...1...>
	<51A9002C.4020402@...1...>
	<CABGO1xg2Us-qfipE2LXm3JXb5XGTLi94z+yQg12PwnE-PFe9VA@...627...>
	<51A93FC4.90400@...1...>
	<51A941D3.8020906@...1...>
	<CABGO1xix7X31m8GhNtpsPGb--zDnb15BAw0_3c-=w=RTf9Td6g@...627...>
	<CABGO1xhsUKFbhnVczSANjn2boS5kvXxeVJKhfyjm_VXuD61aSA@...627...>
Message-ID: <51A9EA65.8080307@...1...>

Le 01/06/2013 09:29, Antonio S?nchez a ?crit :
> I can't found the palette default name or similar thing. I send you a
> screenshot.
>

Did you click on the "Tune palette..." button?

-- 
Beno?t Minisini



From gambas at ...2524...  Sat Jun  1 14:36:27 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Sat, 01 Jun 2013 12:36:27 +0000
Subject: [Gambas-user] Issue 434 in gambas: makan durian ker ?
In-Reply-To: <0-6813199134517018827-4231180488678179895-gambas=googlecode.com@...2524...>
References: <0-6813199134517018827-4231180488678179895-gambas=googlecode.com@...2524...>
Message-ID: <1-6813199134517018827-4231180488678179895-gambas=googlecode.com@...2524...>

Updates:
	Status: Invalid

Comment #1 on issue 434 by benoit.m... at ...626...: makan durian ker ?
http://code.google.com/p/gambas/issues/detail?id=434

(No comment was entered for this change.)

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From introlinux at ...626...  Sat Jun  1 14:38:05 2013
From: introlinux at ...626... (=?ISO-8859-1?Q?Antonio_S=E1nchez?=)
Date: Sat, 1 Jun 2013 14:38:05 +0200
Subject: [Gambas-user] PYTHONPATH equivalent?
In-Reply-To: <51A9EA65.8080307@...1...>
References: <CABGO1xggsHSoM08AkFwWYkYaJhdkD7rtJ=YqbNu7--kWaC5pFQ@...627...>
	<51A8FBCB.9000802@...1...>
	<51A9002C.4020402@...1...>
	<CABGO1xg2Us-qfipE2LXm3JXb5XGTLi94z+yQg12PwnE-PFe9VA@...627...>
	<51A93FC4.90400@...1...>
	<51A941D3.8020906@...1...>
	<CABGO1xix7X31m8GhNtpsPGb--zDnb15BAw0_3c-=w=RTf9Td6g@...627...>
	<CABGO1xhsUKFbhnVczSANjn2boS5kvXxeVJKhfyjm_VXuD61aSA@...627...>
	<51A9EA65.8080307@...1...>
Message-ID: <CABGO1xgqOwboG9OzdasMQ0kMe2UsUhwozfotNgq1g9sTVxBhyA@...627...>

Yes, but I don't know what I have to look for.
Screenshot again.


2013/6/1 Beno?t Minisini <gambas at ...1...>

> Le 01/06/2013 09:29, Antonio S?nchez a ?crit :
> > I can't found the palette default name or similar thing. I send you a
> > screenshot.
> >
>
> Did you click on the "Tune palette..." button?
>
> --
> Beno?t Minisini
>
>
> ------------------------------------------------------------------------------
> Get 100% visibility into Java/.NET code with AppDynamics Lite
> It's a free troubleshooting tool designed for production
> Get down to code-level detail for bottlenecks, with <2% overhead.
> Download for free and get started troubleshooting in minutes.
> http://p.sf.net/sfu/appdyn_d2d_ap2
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: tune.png
Type: image/png
Size: 20819 bytes
Desc: not available
URL: <http://lists.gambas-basic.org/pipermail/user/attachments/20130601/0028ec87/attachment.png>

From gambas at ...1...  Sat Jun  1 14:55:26 2013
From: gambas at ...1... (=?ISO-8859-1?Q?Beno=EEt_Minisini?=)
Date: Sat, 01 Jun 2013 14:55:26 +0200
Subject: [Gambas-user] PYTHONPATH equivalent?
In-Reply-To: <CABGO1xgqOwboG9OzdasMQ0kMe2UsUhwozfotNgq1g9sTVxBhyA@...627...>
References: <CABGO1xggsHSoM08AkFwWYkYaJhdkD7rtJ=YqbNu7--kWaC5pFQ@...627...>
	<51A8FBCB.9000802@...1...>
	<51A9002C.4020402@...1...>
	<CABGO1xg2Us-qfipE2LXm3JXb5XGTLi94z+yQg12PwnE-PFe9VA@...627...>
	<51A93FC4.90400@...1...>
	<51A941D3.8020906@...1...>
	<CABGO1xix7X31m8GhNtpsPGb--zDnb15BAw0_3c-=w=RTf9Td6g@...627...>
	<CABGO1xhsUKFbhnVczSANjn2boS5kvXxeVJKhfyjm_VXuD61aSA@...627...>
	<51A9EA65.8080307@...1...>
	<CABGO1xgqOwboG9OzdasMQ0kMe2UsUhwozfotNgq1g9sTVxBhyA@...627...>
Message-ID: <51A9EF3E.2020808@...1...>

Le 01/06/2013 14:38, Antonio S?nchez a ?crit :
> Yes, but I don't know what I have to look for.
> Screenshot again.

Qt works works with three color palettes (active, inactive, disabled). 
Each palette has a set of different colors for window background, window 
text, view background, view text, button background, button text, 
tooltip background, tooltip text, and few others).

You must look from the orange color and see it if you find it by 
browsing the color roles combo-box (the one with the "Window" text in 
it). You can change the colors too to see if it has an effect.

Or (quicker), send me your '~/.config/Trolltech.conf' file.

-- 
Beno?t Minisini



From introlinux at ...626...  Sat Jun  1 14:59:30 2013
From: introlinux at ...626... (=?ISO-8859-1?Q?Antonio_S=E1nchez?=)
Date: Sat, 1 Jun 2013 14:59:30 +0200
Subject: [Gambas-user] PYTHONPATH equivalent?
In-Reply-To: <51A9EF3E.2020808@...1...>
References: <CABGO1xggsHSoM08AkFwWYkYaJhdkD7rtJ=YqbNu7--kWaC5pFQ@...627...>
	<51A8FBCB.9000802@...1...>
	<51A9002C.4020402@...1...>
	<CABGO1xg2Us-qfipE2LXm3JXb5XGTLi94z+yQg12PwnE-PFe9VA@...627...>
	<51A93FC4.90400@...1...>
	<51A941D3.8020906@...1...>
	<CABGO1xix7X31m8GhNtpsPGb--zDnb15BAw0_3c-=w=RTf9Td6g@...627...>
	<CABGO1xhsUKFbhnVczSANjn2boS5kvXxeVJKhfyjm_VXuD61aSA@...627...>
	<51A9EA65.8080307@...1...>
	<CABGO1xgqOwboG9OzdasMQ0kMe2UsUhwozfotNgq1g9sTVxBhyA@...627...>
	<51A9EF3E.2020808@...1...>
Message-ID: <CABGO1xgC2TkYZfwdyH=Qsm+VXSJtf1xQN+p0cY099kR4cN85Sg@...627...>

Here you are :-)


2013/6/1 Beno?t Minisini <gambas at ...1...>

> Le 01/06/2013 14:38, Antonio S?nchez a ?crit :
> > Yes, but I don't know what I have to look for.
> > Screenshot again.
>
> Qt works works with three color palettes (active, inactive, disabled).
> Each palette has a set of different colors for window background, window
> text, view background, view text, button background, button text,
> tooltip background, tooltip text, and few others).
>
> You must look from the orange color and see it if you find it by
> browsing the color roles combo-box (the one with the "Window" text in
> it). You can change the colors too to see if it has an effect.
>
> Or (quicker), send me your '~/.config/Trolltech.conf' file.
>
> --
> Beno?t Minisini
>
>
> ------------------------------------------------------------------------------
> Get 100% visibility into Java/.NET code with AppDynamics Lite
> It's a free troubleshooting tool designed for production
> Get down to code-level detail for bottlenecks, with <2% overhead.
> Download for free and get started troubleshooting in minutes.
> http://p.sf.net/sfu/appdyn_d2d_ap2
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Trolltech.conf
Type: application/octet-stream
Size: 23797 bytes
Desc: not available
URL: <http://lists.gambas-basic.org/pipermail/user/attachments/20130601/2258dd2d/attachment.obj>

From gambas at ...1...  Sat Jun  1 15:04:22 2013
From: gambas at ...1... (=?ISO-8859-1?Q?Beno=EEt_Minisini?=)
Date: Sat, 01 Jun 2013 15:04:22 +0200
Subject: [Gambas-user] PYTHONPATH equivalent?
In-Reply-To: <CABGO1xgC2TkYZfwdyH=Qsm+VXSJtf1xQN+p0cY099kR4cN85Sg@...627...>
References: <CABGO1xggsHSoM08AkFwWYkYaJhdkD7rtJ=YqbNu7--kWaC5pFQ@...627...>
	<51A8FBCB.9000802@...1...>
	<51A9002C.4020402@...1...>
	<CABGO1xg2Us-qfipE2LXm3JXb5XGTLi94z+yQg12PwnE-PFe9VA@...627...>
	<51A93FC4.90400@...1...>
	<51A941D3.8020906@...1...>
	<CABGO1xix7X31m8GhNtpsPGb--zDnb15BAw0_3c-=w=RTf9Td6g@...627...>
	<CABGO1xhsUKFbhnVczSANjn2boS5kvXxeVJKhfyjm_VXuD61aSA@...627...>
	<51A9EA65.8080307@...1...>
	<CABGO1xgqOwboG9OzdasMQ0kMe2UsUhwozfotNgq1g9sTVxBhyA@...627...>
	<51A9EF3E.2020808@...1...>
	<CABGO1xgC2TkYZfwdyH=Qsm+VXSJtf1xQN+p0cY099kR4cN85Sg@...627...>
Message-ID: <51A9F156.8030002@...1...>

Le 01/06/2013 14:59, Antonio S?nchez a ?crit :
> Here you are :-)
>

Please send me the hexadecimal code of the light orange color you see in 
the GridView.

-- 
Beno?t Minisini



From gambas at ...2524...  Sat Jun  1 15:38:04 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Sat, 01 Jun 2013 13:38:04 +0000
Subject: [Gambas-user] Issue 435 in gambas: Socket blocks events,
	timeout not used
In-Reply-To: <0-6813199134517018827-16400179665065536234-gambas=googlecode.com@...2524...>
References: <0-6813199134517018827-16400179665065536234-gambas=googlecode.com@...2524...>
Message-ID: <1-6813199134517018827-16400179665065536234-gambas=googlecode.com@...2524...>

Updates:
	Status: Accepted
	Labels: -Version Version-3.4.0

Comment #1 on issue 435 by benoit.m... at ...626...: Socket blocks events,  
timeout not used
http://code.google.com/p/gambas/issues/detail?id=435

(No comment was entered for this change.)

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From gambas at ...2524...  Sat Jun  1 15:39:04 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Sat, 01 Jun 2013 13:39:04 +0000
Subject: [Gambas-user] Issue 435 in gambas: Socket blocks events,
	timeout not used
In-Reply-To: <1-6813199134517018827-16400179665065536234-gambas=googlecode.com@...2524...>
References: <1-6813199134517018827-16400179665065536234-gambas=googlecode.com@...2524...>
	<0-6813199134517018827-16400179665065536234-gambas=googlecode.com@...2524...>
Message-ID: <2-6813199134517018827-16400179665065536234-gambas=googlecode.com@...2524...>

Updates:
	Status: Fixed

Comment #2 on issue 435 by benoit.m... at ...626...: Socket blocks events,  
timeout not used
http://code.google.com/p/gambas/issues/detail?id=435

It should be fixed in revision #5689

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From gambas at ...1...  Sat Jun  1 15:41:11 2013
From: gambas at ...1... (=?ISO-8859-1?Q?Beno=EEt_Minisini?=)
Date: Sat, 01 Jun 2013 15:41:11 +0200
Subject: [Gambas-user] Connect hang with latest revision
In-Reply-To: <CAM+S5nriwH6vSALXg-YSDGCC44pMFX6iNnAfna5o1JXocbUa7g@...627...>
References: <CAM+S5npU-_Hq0eZU1Z=i6Fbxw1ZeRVvrch7b1NDO0PTqAAg9SA@...627...>
	<51A79E47.6050607@...1...>
	<CAM+S5nqDHU+7mk8yzS4JF-Qsq2-Ss+_=OCEOewjJZ9Ug+U4=jw@...627...>
	<51A7A2DB.4060701@...1...>
	<CAM+S5nriwH6vSALXg-YSDGCC44pMFX6iNnAfna5o1JXocbUa7g@...627...>
Message-ID: <51A9F9F7.7070704@...1...>

Le 01/06/2013 10:33, Ron a ?crit :
> Benoit,
>
> It seems to be a Gambas3 thing all along... not latest revisions...
> but I didn't see this until I specified a wrong IP address to connect
> too in my project.
> Also on the Raspberry Pi I saw this earlier, thinking... man that's a
> slow device, now I know Gambas socket blocks everything when a host
> cannot be reached..
>
> I detected three bugs... and filled this bug report.
> https://code.google.com/p/gambas/issues/detail?id=435
>
> Regards,
> Ron_2nd.
>

OK. It seems to be an old bad change. I fixed it in revision #5689.

Regards,

-- 
Beno?t Minisini



From gambas at ...1...  Sat Jun  1 18:05:47 2013
From: gambas at ...1... (=?ISO-8859-1?Q?Beno=EEt_Minisini?=)
Date: Sat, 01 Jun 2013 18:05:47 +0200
Subject: [Gambas-user] The WebCam Examples crash
In-Reply-To: <20130531183707.GA530@...2774...>
References: <51A7CF85.4090808@...1823...>
	<CAFkCsL4w=1d=hUQ8U=uKOvBy2VgZC3ZmALzF37Q4f4Ua99mMxg@...627...>
	<op.wxxwvyjkdlsaci@...2913...> <3683554.IBFUsYn7cG@...2592...>
	<51A89A25.9010008@...1...>
	<20130531132148.GC764@...2774...>
	<51A8A8A1.9030401@...1...>
	<20130531183707.GA530@...2774...>
Message-ID: <51AA1BDB.4080902@...1...>

Le 31/05/2013 20:37, Tobias Boege a ?crit :
> On Fri, 31 May 2013, Beno?t Minisini wrote:
>> Hi,
>>
>> Ford anyone could test if gb.media (the gstreamer component) can be used
>> to deal with V4L2 devices?
>>
>> There are gstreamer plugins for that:
>>
>> http://gstreamer.freedesktop.org/data/doc/gstreamer/head/gst-plugins-good-plugins/html/gst-plugins-good-plugins-plugin-video4linux2.html
>>
>
> This is what I did:
>
> - Install and load that v4l2loopback because I have no webcam (/dev/video0
>    is created)
> - Install gst-plugins-good (with the v4l2 gstreamer plugin; this caused
>    minor confusion on Arch Linux because I installed the gstreamer-1.0
>    packages instead of Gambas' 0.10 ones.)
> - As per the wiki of v4l2loopback, execute:
>    $ gst-launch-0.10 videotestsrc ! v4l2sink device=/dev/video0
>    which feeds /dev/video0 with sample data
> - And execute:
>    $ gst-launch-0.10 v4l2src device=/dev/video0 ! xvimagesink
>    which displays the stuff properly.
>
> But now I can't get the Gambas part to work because I don't understand how
> these things work.
>
> Regards,
> Tobi
>

I know how to do the last part, but please tell me exactly how to 
activate that *@#%! v4l2loopback device.

I didn't succeed in compiling the module on Ubuntu 13.04 with the 
information available on the internet.

-- 
Beno?t Minisini



From taboege at ...626...  Sat Jun  1 18:14:45 2013
From: taboege at ...626... (Tobias Boege)
Date: Sat, 1 Jun 2013 18:14:45 +0200
Subject: [Gambas-user] The WebCam Examples crash
In-Reply-To: <51AA1BDB.4080902@...1...>
References: <51A7CF85.4090808@...1823...>
	<CAFkCsL4w=1d=hUQ8U=uKOvBy2VgZC3ZmALzF37Q4f4Ua99mMxg@...627...>
	<op.wxxwvyjkdlsaci@...2913...> <3683554.IBFUsYn7cG@...2592...>
	<51A89A25.9010008@...1...>
	<20130531132148.GC764@...2774...>
	<51A8A8A1.9030401@...1...>
	<20130531183707.GA530@...2774...>
	<51AA1BDB.4080902@...1...>
Message-ID: <20130601161445.GD519@...2774...>

On Sat, 01 Jun 2013, Beno?t Minisini wrote:
> Le 31/05/2013 20:37, Tobias Boege a ?crit :
> > On Fri, 31 May 2013, Beno?t Minisini wrote:
> >> Hi,
> >>
> >> Ford anyone could test if gb.media (the gstreamer component) can be used
> >> to deal with V4L2 devices?
> >>
> >> There are gstreamer plugins for that:
> >>
> >> http://gstreamer.freedesktop.org/data/doc/gstreamer/head/gst-plugins-good-plugins/html/gst-plugins-good-plugins-plugin-video4linux2.html
> >>
> >
> > This is what I did:
> >
> > - Install and load that v4l2loopback because I have no webcam (/dev/video0
> >    is created)
> > - Install gst-plugins-good (with the v4l2 gstreamer plugin; this caused
> >    minor confusion on Arch Linux because I installed the gstreamer-1.0
> >    packages instead of Gambas' 0.10 ones.)
> > - As per the wiki of v4l2loopback, execute:
> >    $ gst-launch-0.10 videotestsrc ! v4l2sink device=/dev/video0
> >    which feeds /dev/video0 with sample data
> > - And execute:
> >    $ gst-launch-0.10 v4l2src device=/dev/video0 ! xvimagesink
> >    which displays the stuff properly.
> >
> > But now I can't get the Gambas part to work because I don't understand how
> > these things work.
> >
> > Regards,
> > Tobi
> >
> 
> I know how to do the last part, but please tell me exactly how to 
> activate that *@#%! v4l2loopback device.
> 
> I didn't succeed in compiling the module on Ubuntu 13.04 with the 
> information available on the internet.
> 

It's a kernel module so you need to have the kernel headers installed to
compile it:

$ sudo apt-get install linux-headers-$(uname -r)

Then clone the source code of v4l2loopback and install it:

$ git clone https://github.com/umlaeute/v4l2loopback
$ cd v4l2loopback
$ make && sudo make install

should do the rest. To load the module, issue

$ sudo modprobe v4l2loopback

and /dev/video0 should be created.

Regards,
Tobi



From gambas at ...1...  Sat Jun  1 18:23:17 2013
From: gambas at ...1... (=?ISO-8859-1?Q?Beno=EEt_Minisini?=)
Date: Sat, 01 Jun 2013 18:23:17 +0200
Subject: [Gambas-user] The WebCam Examples crash
In-Reply-To: <20130601161445.GD519@...2774...>
References: <51A7CF85.4090808@...1823...>
	<CAFkCsL4w=1d=hUQ8U=uKOvBy2VgZC3ZmALzF37Q4f4Ua99mMxg@...627...>
	<op.wxxwvyjkdlsaci@...2913...> <3683554.IBFUsYn7cG@...2592...>
	<51A89A25.9010008@...1...>
	<20130531132148.GC764@...2774...>
	<51A8A8A1.9030401@...1...>
	<20130531183707.GA530@...2774...>
	<51AA1BDB.4080902@...1...>
	<20130601161445.GD519@...2774...>
Message-ID: <51AA1FF5.4010603@...1...>

Le 01/06/2013 18:14, Tobias Boege a ?crit :
> On Sat, 01 Jun 2013, Beno?t Minisini wrote:
>> Le 31/05/2013 20:37, Tobias Boege a ?crit :
>>> On Fri, 31 May 2013, Beno?t Minisini wrote:
>>>> Hi,
>>>>
>>>> Ford anyone could test if gb.media (the gstreamer component) can be used
>>>> to deal with V4L2 devices?
>>>>
>>>> There are gstreamer plugins for that:
>>>>
>>>> http://gstreamer.freedesktop.org/data/doc/gstreamer/head/gst-plugins-good-plugins/html/gst-plugins-good-plugins-plugin-video4linux2.html
>>>>
>>>
>>> This is what I did:
>>>
>>> - Install and load that v4l2loopback because I have no webcam (/dev/video0
>>>     is created)
>>> - Install gst-plugins-good (with the v4l2 gstreamer plugin; this caused
>>>     minor confusion on Arch Linux because I installed the gstreamer-1.0
>>>     packages instead of Gambas' 0.10 ones.)
>>> - As per the wiki of v4l2loopback, execute:
>>>     $ gst-launch-0.10 videotestsrc ! v4l2sink device=/dev/video0
>>>     which feeds /dev/video0 with sample data
>>> - And execute:
>>>     $ gst-launch-0.10 v4l2src device=/dev/video0 ! xvimagesink
>>>     which displays the stuff properly.
>>>
>>> But now I can't get the Gambas part to work because I don't understand how
>>> these things work.
>>>
>>> Regards,
>>> Tobi
>>>
>>
>> I know how to do the last part, but please tell me exactly how to
>> activate that *@#%! v4l2loopback device.
>>
>> I didn't succeed in compiling the module on Ubuntu 13.04 with the
>> information available on the internet.
>>
>
> It's a kernel module so you need to have the kernel headers installed to
> compile it:
>
> $ sudo apt-get install linux-headers-$(uname -r)
>
> Then clone the source code of v4l2loopback and install it:
>
> $ git clone https://github.com/umlaeute/v4l2loopback
> $ cd v4l2loopback
> $ make && sudo make install
>
> should do the rest. To load the module, issue
>
> $ sudo modprobe v4l2loopback
>
> and /dev/video0 should be created.
>
> Regards,
> Tobi
>

I just tried to use the packages provided with Ubuntu, but no way to 
make them working... :-/ So let's go compiling the module by hand...

-- 
Beno?t Minisini



From gambas at ...1...  Sat Jun  1 19:00:45 2013
From: gambas at ...1... (=?ISO-8859-1?Q?Beno=EEt_Minisini?=)
Date: Sat, 01 Jun 2013 19:00:45 +0200
Subject: [Gambas-user] The WebCam Examples crash
In-Reply-To: <51A7CF85.4090808@...1823...>
References: <51A7CF85.4090808@...1823...>
Message-ID: <51AA28BD.3080407@...1...>

Le 31/05/2013 00:15, richard terry a ?crit :
> I've asked about this before and wonder if anyone can help, as the web
> cam is/was critical to my clinical practice as it is integrated with
> EasyGP and I used to continually use it all day to do things ranging
> from snapping the patient's photo for their file, to taking pictures of
> skin lesions, rashes, etc etc, and inserting them directly into the notes.
>
> As previously mentioned this used to work on my old kubuntu 9 machine,
> but no versions since eg 10/11/12 and now on Linux Mint ditto.
>
> Running the  examples, or even my program does bring up the video image,
> but as soon as the form closes the program dies, below is the terminal
> printout.
>
> I can't believe I'm the only one in the world with this problem.
>
> I wonder if anyone else on the list could run the samples and report
> back - give suggestions or guidance.
>
> Regards
>
> richard
>

Hi, Richard.

Can you try to run the MediaPlayer example in revision #5691?

I added a button (a camera) that displays the contents of the first 
video device (/dev/video0) instead of displaying the contents of a file.

Tell me if it works for you. If it is ok, I will add 
brightness/color/contrast controls to the example.

Then I will eventually write a webcam example based on gstreamer only.

Regards,

-- 
Beno?t Minisini



From introlinux at ...626...  Sat Jun  1 19:42:23 2013
From: introlinux at ...626... (=?ISO-8859-1?Q?Antonio_S=E1nchez?=)
Date: Sat, 1 Jun 2013 19:42:23 +0200
Subject: [Gambas-user] PYTHONPATH equivalent?
In-Reply-To: <51A9F156.8030002@...1...>
References: <CABGO1xggsHSoM08AkFwWYkYaJhdkD7rtJ=YqbNu7--kWaC5pFQ@...627...>
	<51A8FBCB.9000802@...1...>
	<51A9002C.4020402@...1...>
	<CABGO1xg2Us-qfipE2LXm3JXb5XGTLi94z+yQg12PwnE-PFe9VA@...627...>
	<51A93FC4.90400@...1...>
	<51A941D3.8020906@...1...>
	<CABGO1xix7X31m8GhNtpsPGb--zDnb15BAw0_3c-=w=RTf9Td6g@...627...>
	<CABGO1xhsUKFbhnVczSANjn2boS5kvXxeVJKhfyjm_VXuD61aSA@...627...>
	<51A9EA65.8080307@...1...>
	<CABGO1xgqOwboG9OzdasMQ0kMe2UsUhwozfotNgq1g9sTVxBhyA@...627...>
	<51A9EF3E.2020808@...1...>
	<CABGO1xgC2TkYZfwdyH=Qsm+VXSJtf1xQN+p0cY099kR4cN85Sg@...627...>
	<51A9F156.8030002@...1...>
Message-ID: <CABGO1xiYPAFM=uvsga4gXsCVz_iAE02LJfO2K=u1rK6C0sT1AA@...627...>

FFECC7, but I can't find it in Trolltech.conf.



2013/6/1 Beno?t Minisini <gambas at ...1...>

> Le 01/06/2013 14:59, Antonio S?nchez a ?crit :
> > Here you are :-)
> >
>
> Please send me the hexadecimal code of the light orange color you see in
> the GridView.
>
> --
> Beno?t Minisini
>
>
> ------------------------------------------------------------------------------
> Get 100% visibility into Java/.NET code with AppDynamics Lite
> It's a free troubleshooting tool designed for production
> Get down to code-level detail for bottlenecks, with <2% overhead.
> Download for free and get started troubleshooting in minutes.
> http://p.sf.net/sfu/appdyn_d2d_ap2
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>


From vuott at ...325...  Sat Jun  1 21:40:58 2013
From: vuott at ...325... (Ru Vuott)
Date: Sat, 1 Jun 2013 20:40:58 +0100 (BST)
Subject: [Gambas-user] gb.media no longer exists after rev. 5691 !
Message-ID: <1370115658.17670.YahooMailClassic@...3063...>

Hello Beno?t,

after updating via SVN my Gambas with rev. #5691, at end of Configure -C, I obtained this notice:


||
|| THESE COMPONENTS ARE DISABLED:
|| - gb.media
||


It seemed so strange to me, because it worked well before the latest updating.
So I uninstalled and then reinstalled everything.
After the complete reinstallation I checked the presence of the component gb.media, but it is no longer present there!
In fact, with new Configure -C I obtain that notice again.

I'ld like to specify that I possess 
libgstreamer0.10-dev libgstreamer-plugins-base0.10-dev
in my system.


Regards.
vuott



From taboege at ...626...  Sat Jun  1 21:41:27 2013
From: taboege at ...626... (Tobias Boege)
Date: Sat, 1 Jun 2013 21:41:27 +0200
Subject: [Gambas-user] gb.media no longer exists after rev. 5691 !
In-Reply-To: <1370115658.17670.YahooMailClassic@...3063...>
References: <1370115658.17670.YahooMailClassic@...3063...>
Message-ID: <20130601194127.GF519@...2774...>

On Sat, 01 Jun 2013, Ru Vuott wrote:
> Hello Beno?t,
> 
> after updating via SVN my Gambas with rev. #5691, at end of Configure -C, I obtained this notice:
> 
> 
> ||
> || THESE COMPONENTS ARE DISABLED:
> || - gb.media
> ||
> 
> 
> It seemed so strange to me, because it worked well before the latest updating.
> So I uninstalled and then reinstalled everything.
> After the complete reinstallation I checked the presence of the component gb.media, but it is no longer present there!
> In fact, with new Configure -C I obtain that notice again.
> 
> I'ld like to specify that I possess 
> libgstreamer0.10-dev libgstreamer-plugins-base0.10-dev
> in my system.
> 

You need the gstreamer 1.0 packages now.



From vuott at ...325...  Sat Jun  1 21:50:16 2013
From: vuott at ...325... (Ru Vuott)
Date: Sat, 1 Jun 2013 20:50:16 +0100 (BST)
Subject: [Gambas-user] gb.media no longer exists -  BIS
Message-ID: <1370116216.14483.YahooMailClassic@...3070...>

In my previous post I wrote:
> After the complete reinstallation I checked the presence of the component
> gb.media, but it is no longer present there!

Well, I would like to point out that the component "gb.media" is present in "Trunk" folder, but it doesn't exist in: /usr/lib/gambas3


vuott



From vuott at ...325...  Sat Jun  1 21:51:24 2013
From: vuott at ...325... (Ru Vuott)
Date: Sat, 1 Jun 2013 20:51:24 +0100 (BST)
Subject: [Gambas-user] gb.media no longer exists after rev. 5691 !
In-Reply-To: <20130601194127.GF519@...2774...>
Message-ID: <1370116284.79931.YahooMailClassic@...3063...>


> 
> You need the gstreamer 1.0 packages now.
> 
> 


Ah, OK !   Thank you very much, Tobia.

vuottt



From gambas at ...1...  Sat Jun  1 21:58:46 2013
From: gambas at ...1... (=?ISO-8859-1?Q?Beno=EEt_Minisini?=)
Date: Sat, 01 Jun 2013 21:58:46 +0200
Subject: [Gambas-user] gb.media no longer exists after rev. 5691 !
In-Reply-To: <1370116284.79931.YahooMailClassic@...3063...>
References: <1370116284.79931.YahooMailClassic@...3063...>
Message-ID: <51AA5276.6060707@...1...>

Le 01/06/2013 21:51, Ru Vuott a ?crit :
>
>>
>> You need the gstreamer 1.0 packages now.
>>
>>
>
>
> Ah, OK !   Thank you very much, Tobia.
>
> vuottt
>

When compiling Gambas from /trunk, you should read all the subversion 
commit log of the subversion commit mailing-list to follow what happens.

Otherwise you will have surprises like that!

-- 
Beno?t Minisini



From introlinux at ...626...  Sun Jun  2 09:04:09 2013
From: introlinux at ...626... (=?ISO-8859-1?Q?Antonio_S=E1nchez?=)
Date: Sun, 2 Jun 2013 09:04:09 +0200
Subject: [Gambas-user] PYTHONPATH equivalent?
In-Reply-To: <CABGO1xiYPAFM=uvsga4gXsCVz_iAE02LJfO2K=u1rK6C0sT1AA@...627...>
References: <CABGO1xggsHSoM08AkFwWYkYaJhdkD7rtJ=YqbNu7--kWaC5pFQ@...627...>
	<51A8FBCB.9000802@...1...>
	<51A9002C.4020402@...1...>
	<CABGO1xg2Us-qfipE2LXm3JXb5XGTLi94z+yQg12PwnE-PFe9VA@...627...>
	<51A93FC4.90400@...1...>
	<51A941D3.8020906@...1...>
	<CABGO1xix7X31m8GhNtpsPGb--zDnb15BAw0_3c-=w=RTf9Td6g@...627...>
	<CABGO1xhsUKFbhnVczSANjn2boS5kvXxeVJKhfyjm_VXuD61aSA@...627...>
	<51A9EA65.8080307@...1...>
	<CABGO1xgqOwboG9OzdasMQ0kMe2UsUhwozfotNgq1g9sTVxBhyA@...627...>
	<51A9EF3E.2020808@...1...>
	<CABGO1xgC2TkYZfwdyH=Qsm+VXSJtf1xQN+p0cY099kR4cN85Sg@...627...>
	<51A9F156.8030002@...1...>
	<CABGO1xiYPAFM=uvsga4gXsCVz_iAE02LJfO2K=u1rK6C0sT1AA@...627...>
Message-ID: <CABGO1xhrBi9eBHxiXA+ej=YRFbk3W55o3Cvj2dMx81Tadt8jNA@...627...>

Hi! Beno?t

I have more datas. I run k3b, vlc, smplayer, tuxguitar and others programs
all built with QT, and neither has the problem of the orange grid. Only
programs made with gambas3.4.1 have this problem (and the own gambas).
It works ok with gambas 3.3.4, and and you say that there was a bug related
to this, it has to be something that has been overlooked correcting that
bug.




2013/6/1 Antonio S?nchez <introlinux at ...626...>

> FFECC7, but I can't find it in Trolltech.conf.
>
>
>
>
> 2013/6/1 Beno?t Minisini <gambas at ...1...>
>
>> Le 01/06/2013 14:59, Antonio S?nchez a ?crit :
>> > Here you are :-)
>> >
>>
>> Please send me the hexadecimal code of the light orange color you see in
>> the GridView.
>>
>> --
>> Beno?t Minisini
>>
>>
>> ------------------------------------------------------------------------------
>> Get 100% visibility into Java/.NET code with AppDynamics Lite
>> It's a free troubleshooting tool designed for production
>> Get down to code-level detail for bottlenecks, with <2% overhead.
>> Download for free and get started troubleshooting in minutes.
>> http://p.sf.net/sfu/appdyn_d2d_ap2
>> _______________________________________________
>> Gambas-user mailing list
>> Gambas-user at lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/gambas-user
>>
>
>


From adrien.prokopowicz at ...626...  Sun Jun  2 11:47:12 2013
From: adrien.prokopowicz at ...626... (Adrien Prokopowicz)
Date: Sun, 02 Jun 2013 11:47:12 +0200
Subject: [Gambas-user] gb.media : Crash when reading the
 MediaPlayer.ConnectionSpeed property
Message-ID: <op.wx1pgy2pdlsaci@...2913...>

Hi,

Everything is in the title : simply reading the ConnectionSpeed of a  
MediaPlayer leads to a crash.
It seems to happen everytime I try to read it, making the debugging of a  
MediaPlayer impossible...
Simple project and its valgrind output attached (gdb doesn't say more  
about this ...).

I also discovered another bug from the last revisions (doing  
MediaPlayer.Pause() when the player is stopped leads to a "Cannot set  
status" error), but I need this crash to be fixed first in order to debug  
and isolate this one.

Regards,

-- 
Adrien Prokopowicz
-------------- next part --------------
A non-text attachment was scrubbed...
Name: valgrind-out.tar.bz2
Type: application/bzip2
Size: 1052 bytes
Desc: not available
URL: <http://lists.gambas-basic.org/pipermail/user/attachments/20130602/ac555bb6/attachment.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: TestMedia-0.0.1.tar.gz
Type: application/x-gzip
Size: 4621 bytes
Desc: not available
URL: <http://lists.gambas-basic.org/pipermail/user/attachments/20130602/ac555bb6/attachment-0001.bin>

From adrien.prokopowicz at ...626...  Sun Jun  2 12:02:43 2013
From: adrien.prokopowicz at ...626... (Adrien Prokopowicz)
Date: Sun, 02 Jun 2013 12:02:43 +0200
Subject: [Gambas-user] The WebCam Examples crash
In-Reply-To: <51AA28BD.3080407@...1...>
References: <51A7CF85.4090808@...1823...>
	<51AA28BD.3080407@...1...>
Message-ID: <op.wx1p6tvgdlsaci@...2913...>

Le Sat, 01 Jun 2013 19:00:45 +0200, Beno?t Minisini  
<gambas at ...1...> a ?crit:

>
> Hi, Richard.
>
> Can you try to run the MediaPlayer example in revision #5691?
>
> I added a button (a camera) that displays the contents of the first
> video device (/dev/video0) instead of displaying the contents of a file.
>
> Tell me if it works for you. If it is ok, I will add
> brightness/color/contrast controls to the example.
>
> Then I will eventually write a webcam example based on gstreamer only.
>
> Regards,
>

Hi,

I have a webcam, and reading from it works perfectly in the MediaPlayer  
example.
However, now trying to open an audio file leads to a crash (not the same  
as the one I reported earlier).
Valgrind and GDB outputs attached.

Regards,

-- 
Adrien Prokopowicz
-------------- next part --------------
A non-text attachment was scrubbed...
Name: debug.tar.bz2
Type: application/bzip2
Size: 2505 bytes
Desc: not available
URL: <http://lists.gambas-basic.org/pipermail/user/attachments/20130602/8df6d9e7/attachment.bin>

From adrien.prokopowicz at ...626...  Sun Jun  2 16:00:19 2013
From: adrien.prokopowicz at ...626... (Adrien Prokopowicz)
Date: Sun, 02 Jun 2013 16:00:19 +0200
Subject: [Gambas-user] The WebCam Examples crash
In-Reply-To: <op.wx1p6tvgdlsaci@...2913...>
References: <51A7CF85.4090808@...1823...>
	<51AA28BD.3080407@...1...>
	<op.wx1p6tvgdlsaci@...2913...>
Message-ID: <op.wx106teodlsaci@...2913...>

Le Sun, 02 Jun 2013 12:02:43 +0200, Adrien Prokopowicz  
<adrien.prokopowicz at ...626...> a ?crit:

> Le Sat, 01 Jun 2013 19:00:45 +0200, Beno?t Minisini  
> <gambas at ...1...> a ?crit:
>
>>
>> Hi, Richard.
>>
>> Can you try to run the MediaPlayer example in revision #5691?
>>
>> I added a button (a camera) that displays the contents of the first
>> video device (/dev/video0) instead of displaying the contents of a file.
>>
>> Tell me if it works for you. If it is ok, I will add
>> brightness/color/contrast controls to the example.
>>
>> Then I will eventually write a webcam example based on gstreamer only.
>>
>> Regards,
>>
>
> Hi,
>
> I have a webcam, and reading from it works perfectly in the MediaPlayer  
> example.
> However, now trying to open an audio file leads to a crash (not the same  
> as the one I reported earlier).
> Valgrind and GDB outputs attached.
>
> Regards,
>

I found out what was wrong : I hadn't the gst-plugins-bad and  
gst-plugins-ugly installed on my system (for the gstreamer-1.0 version),  
so the MP3 files could not be read by GStreamer.

But the problem is not fixed, as I should get an error message instead of  
a wild crash. :/

-- 
Adrien Prokopowicz



From adrien.prokopowicz at ...626...  Sun Jun  2 16:02:30 2013
From: adrien.prokopowicz at ...626... (Adrien Prokopowicz)
Date: Sun, 02 Jun 2013 16:02:30 +0200
Subject: [Gambas-user] gb.media : Crash when reading the
 MediaPlayer.ConnectionSpeed property
In-Reply-To: <op.wx1pgy2pdlsaci@...2913...>
References: <op.wx1pgy2pdlsaci@...2913...>
Message-ID: <op.wx11agnwdlsaci@...2913...>

Le Sun, 02 Jun 2013 11:47:12 +0200, Adrien Prokopowicz  
<adrien.prokopowicz at ...626...> a ?crit:

> Hi,
>
> Everything is in the title : simply reading the ConnectionSpeed of a  
> MediaPlayer leads to a crash.
> It seems to happen everytime I try to read it, making the debugging of a  
> MediaPlayer impossible...
> Simple project and its valgrind output attached (gdb doesn't say more  
> about this ...).
>
> I also discovered another bug from the last revisions (doing  
> MediaPlayer.Pause() when the player is stopped leads to a "Cannot set  
> status" error), but I need this crash to be fixed first in order to  
> debug and isolate this one.
>
> Regards,
>

As I said in the other thread, I installed the bad & ugly plugins for  
GStreamer. That fixed the "Cannot set status" issue, but the  
ConnectionSpeed property still crashes.

Regards,

-- 
Adrien Prokopowicz



From gambas at ...1...  Sun Jun  2 16:19:05 2013
From: gambas at ...1... (=?UTF-8?B?QmVub8OudCBNaW5pc2luaQ==?=)
Date: Sun, 02 Jun 2013 16:19:05 +0200
Subject: [Gambas-user] gb.media : Crash when reading the
 MediaPlayer.ConnectionSpeed property
In-Reply-To: <op.wx11agnwdlsaci@...2913...>
References: <op.wx1pgy2pdlsaci@...2913...> <op.wx11agnwdlsaci@...2913...>
Message-ID: <51AB5459.80401@...1...>

Le 02/06/2013 16:02, Adrien Prokopowicz a ?crit :
> Le Sun, 02 Jun 2013 11:47:12 +0200, Adrien Prokopowicz
> <adrien.prokopowicz at ...626...> a ?crit:
>
>> Hi,
>>
>> Everything is in the title : simply reading the ConnectionSpeed of a
>> MediaPlayer leads to a crash.
>> It seems to happen everytime I try to read it, making the debugging of a
>> MediaPlayer impossible...
>> Simple project and its valgrind output attached (gdb doesn't say more
>> about this ...).
>>
>> I also discovered another bug from the last revisions (doing
>> MediaPlayer.Pause() when the player is stopped leads to a "Cannot set
>> status" error), but I need this crash to be fixed first in order to
>> debug and isolate this one.
>>
>> Regards,
>>
>
> As I said in the other thread, I installed the bad & ugly plugins for
> GStreamer. That fixed the "Cannot set status" issue, but the
> ConnectionSpeed property still crashes.
>
> Regards,
>

It should be better with revision 5692.

-- 
Beno?t Minisini



From gambas at ...1...  Sun Jun  2 16:23:58 2013
From: gambas at ...1... (=?UTF-8?B?QmVub8OudCBNaW5pc2luaQ==?=)
Date: Sun, 02 Jun 2013 16:23:58 +0200
Subject: [Gambas-user] gb.media : Crash when reading the
 MediaPlayer.ConnectionSpeed property
In-Reply-To: <51AB5459.80401@...1...>
References: <op.wx1pgy2pdlsaci@...2913...> <op.wx11agnwdlsaci@...2913...>
	<51AB5459.80401@...1...>
Message-ID: <51AB557E.7040309@...1...>

Le 02/06/2013 16:19, Beno?t Minisini a ?crit :
> Le 02/06/2013 16:02, Adrien Prokopowicz a ?crit :
>> Le Sun, 02 Jun 2013 11:47:12 +0200, Adrien Prokopowicz
>> <adrien.prokopowicz at ...626...> a ?crit:
>>
>>> Hi,
>>>
>>> Everything is in the title : simply reading the ConnectionSpeed of a
>>> MediaPlayer leads to a crash.
>>> It seems to happen everytime I try to read it, making the debugging of a
>>> MediaPlayer impossible...
>>> Simple project and its valgrind output attached (gdb doesn't say more
>>> about this ...).
>>>
>>> I also discovered another bug from the last revisions (doing
>>> MediaPlayer.Pause() when the player is stopped leads to a "Cannot set
>>> status" error), but I need this crash to be fixed first in order to
>>> debug and isolate this one.
>>>
>>> Regards,
>>>
>>
>> As I said in the other thread, I installed the bad & ugly plugins for
>> GStreamer. That fixed the "Cannot set status" issue, but the
>> ConnectionSpeed property still crashes.
>>
>> Regards,
>>
>
> It should be better with revision 5692.
>

Mmm... Not perfect yet, I now have some crashes only when compiling with 
optimizations enabled...

-- 
Beno?t Minisini



From gambas at ...1...  Sun Jun  2 16:35:17 2013
From: gambas at ...1... (=?UTF-8?B?QmVub8OudCBNaW5pc2luaQ==?=)
Date: Sun, 02 Jun 2013 16:35:17 +0200
Subject: [Gambas-user] gb.media : Crash when reading the
 MediaPlayer.ConnectionSpeed property
In-Reply-To: <51AB557E.7040309@...1...>
References: <op.wx1pgy2pdlsaci@...2913...> <op.wx11agnwdlsaci@...2913...>
	<51AB5459.80401@...1...>
	<51AB557E.7040309@...1...>
Message-ID: <51AB5825.5050906@...1...>

Le 02/06/2013 16:23, Beno?t Minisini a ?crit :
> Le 02/06/2013 16:19, Beno?t Minisini a ?crit :
>> Le 02/06/2013 16:02, Adrien Prokopowicz a ?crit :
>>> Le Sun, 02 Jun 2013 11:47:12 +0200, Adrien Prokopowicz
>>> <adrien.prokopowicz at ...626...> a ?crit:
>>>
>>>> Hi,
>>>>
>>>> Everything is in the title : simply reading the ConnectionSpeed of a
>>>> MediaPlayer leads to a crash.
>>>> It seems to happen everytime I try to read it, making the debugging
>>>> of a
>>>> MediaPlayer impossible...
>>>> Simple project and its valgrind output attached (gdb doesn't say more
>>>> about this ...).
>>>>
>>>> I also discovered another bug from the last revisions (doing
>>>> MediaPlayer.Pause() when the player is stopped leads to a "Cannot set
>>>> status" error), but I need this crash to be fixed first in order to
>>>> debug and isolate this one.
>>>>
>>>> Regards,
>>>>
>>>
>>> As I said in the other thread, I installed the bad & ugly plugins for
>>> GStreamer. That fixed the "Cannot set status" issue, but the
>>> ConnectionSpeed property still crashes.
>>>
>>> Regards,
>>>
>>
>> It should be better with revision 5692.
>>
>
> Mmm... Not perfect yet, I now have some crashes only when compiling with
> optimizations enabled...
>

OK, this was the ConnectionSpeed bug. It should be fixed in revision #5693.

Regards,

-- 
Beno?t Minisini



From ron at ...1740...  Sun Jun  2 17:05:46 2013
From: ron at ...1740... (Ron)
Date: Sun, 2 Jun 2013 17:05:46 +0200
Subject: [Gambas-user] Connect hang with latest revision
In-Reply-To: <51A9F9F7.7070704@...1...>
References: <CAM+S5npU-_Hq0eZU1Z=i6Fbxw1ZeRVvrch7b1NDO0PTqAAg9SA@...627...>
	<51A79E47.6050607@...1...>
	<CAM+S5nqDHU+7mk8yzS4JF-Qsq2-Ss+_=OCEOewjJZ9Ug+U4=jw@...627...>
	<51A7A2DB.4060701@...1...>
	<CAM+S5nriwH6vSALXg-YSDGCC44pMFX6iNnAfna5o1JXocbUa7g@...627...>
	<51A9F9F7.7070704@...1...>
Message-ID: <CAM+S5npf4-SDyhy8ESsfKgH1ny2bgmMGDsbKmFY+6O=Kxr81AQ@...627...>

Bug #1 and Bug #2 are fixed, thanks for that!

The time it takes for Event_Error to trigger is still more than 2 minutes.
I see that in ClientSocket there is a 10sec timer running which cuts
the socket if still not connected.

Is this the way it should be implemented, what about the TimeOut
property it seems it doesn't work?
Would be nice if users know after 10 secs that the socket is unable to
connect, +2 minutes is too long...

Regards,
Ron.

2013/6/1 Beno?t Minisini <gambas at ...1...>:
> Le 01/06/2013 10:33, Ron a ?crit :
>> Benoit,
>>
>> It seems to be a Gambas3 thing all along... not latest revisions...
>> but I didn't see this until I specified a wrong IP address to connect
>> too in my project.
>> Also on the Raspberry Pi I saw this earlier, thinking... man that's a
>> slow device, now I know Gambas socket blocks everything when a host
>> cannot be reached..
>>
>> I detected three bugs... and filled this bug report.
>> https://code.google.com/p/gambas/issues/detail?id=435
>>
>> Regards,
>> Ron_2nd.
>>
>
> OK. It seems to be an old bad change. I fixed it in revision #5689.
>
> Regards,
>
> --
> Beno?t Minisini
>
> ------------------------------------------------------------------------------
> Get 100% visibility into Java/.NET code with AppDynamics Lite
> It's a free troubleshooting tool designed for production
> Get down to code-level detail for bottlenecks, with <2% overhead.
> Download for free and get started troubleshooting in minutes.
> http://p.sf.net/sfu/appdyn_d2d_ap2
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user



From jussi.lahtinen at ...626...  Sun Jun  2 17:20:37 2013
From: jussi.lahtinen at ...626... (Jussi Lahtinen)
Date: Sun, 2 Jun 2013 18:20:37 +0300
Subject: [Gambas-user] If Markdown comments of a component aren't
 visible in a project.
In-Reply-To: <1370042254.16396.YahooMailClassic@...3065...>
References: <1370042254.16396.YahooMailClassic@...3065...>
Message-ID: <CAFJMe7SrZ6Or9GF-VnpqegBuwzXPK_4JLpv1pz6cQ_iCy+rZ4Q@...627...>

I think documentation for components comes only from Gambas documentation
pages ( http://www.gambasdoc.org ).

Jussi


On Sat, Jun 1, 2013 at 2:17 AM, Ru Vuott <vuott at ...325...> wrote:

> Hello,
>
> I wrote a component: "gb.midi", all in Gambas, for playing the Midi files.
> Well, for each of its properties and functions, I wrote a comment via
> "markdown".
> But when I call a gb.midi function or property in a project, those
> Markdown comments do not appear in respective popup guide. This shows text:
> "page not available."
>
> Where could be the error?
>
> Thanks
> vuott
>
>
> ------------------------------------------------------------------------------
> Get 100% visibility into Java/.NET code with AppDynamics Lite
> It's a free troubleshooting tool designed for production
> Get down to code-level detail for bottlenecks, with <2% overhead.
> Download for free and get started troubleshooting in minutes.
> http://p.sf.net/sfu/appdyn_d2d_ap2
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>


From jussi.lahtinen at ...626...  Sun Jun  2 17:22:41 2013
From: jussi.lahtinen at ...626... (Jussi Lahtinen)
Date: Sun, 2 Jun 2013 18:22:41 +0300
Subject: [Gambas-user] gb.media no longer exists - BIS
In-Reply-To: <1370116216.14483.YahooMailClassic@...3070...>
References: <1370116216.14483.YahooMailClassic@...3070...>
Message-ID: <CAFJMe7RSQYXW6X6y-2fCuQgOorz-VKJyTcRg=f9DdCRCQAPJyw@...627...>

Then you haven't compiled/installed it correctly.

Jussi


On Sat, Jun 1, 2013 at 10:50 PM, Ru Vuott <vuott at ...325...> wrote:

> In my previous post I wrote:
> > After the complete reinstallation I checked the presence of the component
> > gb.media, but it is no longer present there!
>
> Well, I would like to point out that the component "gb.media" is present
> in "Trunk" folder, but it doesn't exist in: /usr/lib/gambas3
>
>
> vuott
>
>
> ------------------------------------------------------------------------------
> Get 100% visibility into Java/.NET code with AppDynamics Lite
> It's a free troubleshooting tool designed for production
> Get down to code-level detail for bottlenecks, with <2% overhead.
> Download for free and get started troubleshooting in minutes.
> http://p.sf.net/sfu/appdyn_d2d_ap2
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>


From Gambas at ...1950...  Mon Jun  3 09:39:08 2013
From: Gambas at ...1950... (Caveat)
Date: Mon, 03 Jun 2013 09:39:08 +0200
Subject: [Gambas-user] Connect hang with latest revision
In-Reply-To: <CAM+S5npf4-SDyhy8ESsfKgH1ny2bgmMGDsbKmFY+6O=Kxr81AQ@...627...>
References: <CAM+S5npU-_Hq0eZU1Z=i6Fbxw1ZeRVvrch7b1NDO0PTqAAg9SA@...627...>
	<51A79E47.6050607@...1...>
	<CAM+S5nqDHU+7mk8yzS4JF-Qsq2-Ss+_=OCEOewjJZ9Ug+U4=jw@...627...>
	<51A7A2DB.4060701@...1...>
	<CAM+S5nriwH6vSALXg-YSDGCC44pMFX6iNnAfna5o1JXocbUa7g@...627...>
	<51A9F9F7.7070704@...1...>
	<CAM+S5npf4-SDyhy8ESsfKgH1ny2bgmMGDsbKmFY+6O=Kxr81AQ@...627...>
Message-ID: <51AC481C.6090807@...1950...>

Strangely enough, I had a similar problem with sockets in python.  
Turned out that the problem was caused by setting the timeout value on a 
socket, *then* setting the blocking mode.  It seems as if the underlying 
socket 'loses' the timeout value (I actually discovered it when creating 
a help function that showed the state of the socket) when you set the 
blocking mode.

I was seeing the same symptoms as you, I had the timeout set (or so I 
thought!) to 10 seconds and the socket would take more than 2 minutes to 
time out...

I presume under Gambas you have the same possibility to set 'blocking' 
sockets (synchronous) and 'non-blocking' (asynchronous) sockets and to 
set a user-defined timeout value.

Please do try first setting the socket to blocking (synchronous) mode, 
THEN setting the timeout value!

Kind regards,
Caveat

On 02/06/13 17:05, Ron wrote:
> Bug #1 and Bug #2 are fixed, thanks for that!
>
> The time it takes for Event_Error to trigger is still more than 2 minutes.
> I see that in ClientSocket there is a 10sec timer running which cuts
> the socket if still not connected.
>
> Is this the way it should be implemented, what about the TimeOut
> property it seems it doesn't work?
> Would be nice if users know after 10 secs that the socket is unable to
> connect, +2 minutes is too long...
>
> Regards,
> Ron.
>
> 2013/6/1 Beno?t Minisini <gambas at ...1...>:
>> Le 01/06/2013 10:33, Ron a ?crit :
>>> Benoit,
>>>
>>> It seems to be a Gambas3 thing all along... not latest revisions...
>>> but I didn't see this until I specified a wrong IP address to connect
>>> too in my project.
>>> Also on the Raspberry Pi I saw this earlier, thinking... man that's a
>>> slow device, now I know Gambas socket blocks everything when a host
>>> cannot be reached..
>>>
>>> I detected three bugs... and filled this bug report.
>>> https://code.google.com/p/gambas/issues/detail?id=435
>>>
>>> Regards,
>>> Ron_2nd.
>>>
>> OK. It seems to be an old bad change. I fixed it in revision #5689.
>>
>> Regards,
>>
>> --
>> Beno?t Minisini
>>
>> ------------------------------------------------------------------------------
>> Get 100% visibility into Java/.NET code with AppDynamics Lite
>> It's a free troubleshooting tool designed for production
>> Get down to code-level detail for bottlenecks, with <2% overhead.
>> Download for free and get started troubleshooting in minutes.
>> http://p.sf.net/sfu/appdyn_d2d_ap2
>> _______________________________________________
>> Gambas-user mailing list
>> Gambas-user at lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/gambas-user
> ------------------------------------------------------------------------------
> Get 100% visibility into Java/.NET code with AppDynamics Lite
> It's a free troubleshooting tool designed for production
> Get down to code-level detail for bottlenecks, with <2% overhead.
> Download for free and get started troubleshooting in minutes.
> http://p.sf.net/sfu/appdyn_d2d_ap2
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>




From vuott at ...325...  Mon Jun  3 12:28:01 2013
From: vuott at ...325... (Ru Vuott)
Date: Mon, 3 Jun 2013 11:28:01 +0100 (BST)
Subject: [Gambas-user] If Markdown comments of a component aren't
	visible in a project.
In-Reply-To: <CAFJMe7SrZ6Or9GF-VnpqegBuwzXPK_4JLpv1pz6cQ_iCy+rZ4Q@...627...>
Message-ID: <1370255281.47768.YahooMailClassic@...3070...>


> I think documentation for components
> comes only from Gambas documentation
> pages ( http://www.gambasdoc.org ).
> 
> Jussi
> 


Hello Jussi,

I wrote this my question, because if I use libraries ".gambas", I can see "Markdown" comments in projects that loaded those libraries.

So, if I this comment in my "library.gambas" :


'' This is a markdown comment......

Public Function Eneidos()

 ....
.....

Then, in a project, that loads my "library.gambas", if I wrote that function, I can see that comment in the popup guide.

...I thought it could get even with the Components.

Bye
vuott



From gambas at ...2524...  Mon Jun  3 16:14:55 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Mon, 03 Jun 2013 14:14:55 +0000
Subject: [Gambas-user] Issue 436 in gambas: IconView + "DEL" Key Cause
 ScrollArea_KeyPress.823 OutofBound Exception
Message-ID: <0-6813199134517018827-3391587943369208557-gambas=googlecode.com@...2524...>

Status: New
Owner: ----
Labels: Version-3.4.1 Type-Bug Priority-Medium OpSys-Any Dist-Any Arch-Any  
Desktop-Any GUI-Any

New issue 436 by s... at ...3142...: IconView + "DEL" Key Cause  
ScrollArea_KeyPress.823  OutofBound Exception
http://code.google.com/p/gambas/issues/detail?id=436

1) Describe the problem.

    IconView has outBound Error when press "DELETE" key


2) GIVE THE FOLLOWING INFORMATIONS (if they are appropriate):

Version: 3.4.1
Revision:
Operating system: Linux
Distribution: Netrunner 12.10
Architecture:  x86_64
GUI component: QT4
Desktop used: KDE 4.9.5

3) Provide a little project that reproduces the bug or the crash.
     Project attached.
4) If your project needs a database, try to provide it, or part of it.
     no DB
5) Explain clearly how to reproduce the bug or the crash.

     new a GUI project (qt4) with a single Form
     put IconView on the Window
     add 1 item (or any number of item) to IconView
     select last item in the view
     press "DEL" on keyboard


6) By doing that carefully, you have done 50% of the bug fix job!

IMPORTANT NOTE: if you encounter several different problems or bugs, (for
example, a bug in your project, and an interpreter crash while debugging
it), please create distinct issues!


Attachments:
	IconViewBug-0.0.1.tar.gz  10.7 KB

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From gambas.fr at ...626...  Mon Jun  3 16:17:32 2013
From: gambas.fr at ...626... (Fabien Bodard)
Date: Mon, 3 Jun 2013 16:17:32 +0200
Subject: [Gambas-user] The WebCam Examples crash
In-Reply-To: <op.wx106teodlsaci@...2913...>
References: <51A7CF85.4090808@...1823...>
	<51AA28BD.3080407@...1...>
	<op.wx1p6tvgdlsaci@...2913...> <op.wx106teodlsaci@...2913...>
Message-ID: <CAFkCsL7hncYFWXGxb4AOkBqOGm_E7UNtkGpgb+NMq2tjooBf1A@...627...>

But there is always the problem of how to grab the cam picture and put it
in the image stream, to be able to map it every where ... like in an ogl
texture ?




2013/6/2 Adrien Prokopowicz <adrien.prokopowicz at ...626...>

> Le Sun, 02 Jun 2013 12:02:43 +0200, Adrien Prokopowicz
> <adrien.prokopowicz at ...626...> a ?crit:
>
> > Le Sat, 01 Jun 2013 19:00:45 +0200, Beno?t Minisini
> > <gambas at ...1...> a ?crit:
> >
> >>
> >> Hi, Richard.
> >>
> >> Can you try to run the MediaPlayer example in revision #5691?
> >>
> >> I added a button (a camera) that displays the contents of the first
> >> video device (/dev/video0) instead of displaying the contents of a file.
> >>
> >> Tell me if it works for you. If it is ok, I will add
> >> brightness/color/contrast controls to the example.
> >>
> >> Then I will eventually write a webcam example based on gstreamer only.
> >>
> >> Regards,
> >>
> >
> > Hi,
> >
> > I have a webcam, and reading from it works perfectly in the MediaPlayer
> > example.
> > However, now trying to open an audio file leads to a crash (not the same
> > as the one I reported earlier).
> > Valgrind and GDB outputs attached.
> >
> > Regards,
> >
>
> I found out what was wrong : I hadn't the gst-plugins-bad and
> gst-plugins-ugly installed on my system (for the gstreamer-1.0 version),
> so the MP3 files could not be read by GStreamer.
>
> But the problem is not fixed, as I should get an error message instead of
> a wild crash. :/
>
> --
> Adrien Prokopowicz
>
>
> ------------------------------------------------------------------------------
> Get 100% visibility into Java/.NET code with AppDynamics Lite
> It's a free troubleshooting tool designed for production
> Get down to code-level detail for bottlenecks, with <2% overhead.
> Download for free and get started troubleshooting in minutes.
> http://p.sf.net/sfu/appdyn_d2d_ap2
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>



-- 
Fabien Bodard


From gambas at ...1...  Mon Jun  3 19:50:42 2013
From: gambas at ...1... (=?ISO-8859-1?Q?Beno=EEt_Minisini?=)
Date: Mon, 03 Jun 2013 19:50:42 +0200
Subject: [Gambas-user] The WebCam Examples crash
In-Reply-To: <CAFkCsL7hncYFWXGxb4AOkBqOGm_E7UNtkGpgb+NMq2tjooBf1A@...627...>
References: <51A7CF85.4090808@...1823...>
	<51AA28BD.3080407@...1...>
	<op.wx1p6tvgdlsaci@...2913...> <op.wx106teodlsaci@...2913...>
	<CAFkCsL7hncYFWXGxb4AOkBqOGm_E7UNtkGpgb+NMq2tjooBf1A@...627...>
Message-ID: <51ACD772.7070900@...1...>

Le 03/06/2013 16:17, Fabien Bodard a ?crit :
> But there is always the problem of how to grab the cam picture and put it
> in the image stream, to be able to map it every where ... like in an ogl
> texture ?
>

It's on its way...

-- 
Beno?t Minisini



From gambas at ...1...  Mon Jun  3 19:52:16 2013
From: gambas at ...1... (=?ISO-8859-1?Q?Beno=EEt_Minisini?=)
Date: Mon, 03 Jun 2013 19:52:16 +0200
Subject: [Gambas-user] The WebCam Examples crash
In-Reply-To: <51ACD772.7070900@...1...>
References: <51A7CF85.4090808@...1823...>
	<51AA28BD.3080407@...1...>
	<op.wx1p6tvgdlsaci@...2913...> <op.wx106teodlsaci@...2913...>
	<CAFkCsL7hncYFWXGxb4AOkBqOGm_E7UNtkGpgb+NMq2tjooBf1A@...627...>
	<51ACD772.7070900@...1...>
Message-ID: <51ACD7D0.6070005@...1...>

Le 03/06/2013 19:50, Beno?t Minisini a ?crit :
> Le 03/06/2013 16:17, Fabien Bodard a ?crit :
>> But there is always the problem of how to grab the cam picture and put it
>> in the image stream, to be able to map it every where ... like in an ogl
>> texture ?
>>
>
> It's on its way...
>

Here it is, in revision #5694.

MediaPlayer.Video.Image is a new property that returns an Image of the 
current (or last) displayed frame.

-- 
Beno?t Minisini



From gambas at ...1...  Mon Jun  3 20:38:10 2013
From: gambas at ...1... (=?ISO-8859-1?Q?Beno=EEt_Minisini?=)
Date: Mon, 03 Jun 2013 20:38:10 +0200
Subject: [Gambas-user] Connect hang with latest revision
In-Reply-To: <51AC481C.6090807@...1950...>
References: <CAM+S5npU-_Hq0eZU1Z=i6Fbxw1ZeRVvrch7b1NDO0PTqAAg9SA@...627...>
	<51A79E47.6050607@...1...>
	<CAM+S5nqDHU+7mk8yzS4JF-Qsq2-Ss+_=OCEOewjJZ9Ug+U4=jw@...627...>
	<51A7A2DB.4060701@...1...>
	<CAM+S5nriwH6vSALXg-YSDGCC44pMFX6iNnAfna5o1JXocbUa7g@...627...>
	<51A9F9F7.7070704@...1...>
	<CAM+S5npf4-SDyhy8ESsfKgH1ny2bgmMGDsbKmFY+6O=Kxr81AQ@...627...>
	<51AC481C.6090807@...1950...>
Message-ID: <51ACE292.20509@...1...>

Le 03/06/2013 09:39, Caveat a ?crit :
> Strangely enough, I had a similar problem with sockets in python.
> Turned out that the problem was caused by setting the timeout value on a
> socket, *then* setting the blocking mode.  It seems as if the underlying
> socket 'loses' the timeout value (I actually discovered it when creating
> a help function that showed the state of the socket) when you set the
> blocking mode.
>
> I was seeing the same symptoms as you, I had the timeout set (or so I
> thought!) to 10 seconds and the socket would take more than 2 minutes to
> time out...
>
> I presume under Gambas you have the same possibility to set 'blocking'
> sockets (synchronous) and 'non-blocking' (asynchronous) sockets and to
> set a user-defined timeout value.
>
> Please do try first setting the socket to blocking (synchronous) mode,
> THEN setting the timeout value!
>
> Kind regards,
> Caveat
>

Huh, really? Weird!

I will try to fix that...

-- 
Beno?t Minisini



From gambas at ...1...  Mon Jun  3 21:14:46 2013
From: gambas at ...1... (=?ISO-8859-1?Q?Beno=EEt_Minisini?=)
Date: Mon, 03 Jun 2013 21:14:46 +0200
Subject: [Gambas-user] Connect hang with latest revision
In-Reply-To: <CAM+S5npf4-SDyhy8ESsfKgH1ny2bgmMGDsbKmFY+6O=Kxr81AQ@...627...>
References: <CAM+S5npU-_Hq0eZU1Z=i6Fbxw1ZeRVvrch7b1NDO0PTqAAg9SA@...627...>
	<51A79E47.6050607@...1...>
	<CAM+S5nqDHU+7mk8yzS4JF-Qsq2-Ss+_=OCEOewjJZ9Ug+U4=jw@...627...>
	<51A7A2DB.4060701@...1...>
	<CAM+S5nriwH6vSALXg-YSDGCC44pMFX6iNnAfna5o1JXocbUa7g@...627...>
	<51A9F9F7.7070704@...1...>
	<CAM+S5npf4-SDyhy8ESsfKgH1ny2bgmMGDsbKmFY+6O=Kxr81AQ@...627...>
Message-ID: <51ACEB26.2000509@...1...>

Le 02/06/2013 17:05, Ron a ?crit :
> Bug #1 and Bug #2 are fixed, thanks for that!
>
> The time it takes for Event_Error to trigger is still more than 2 minutes.
> I see that in ClientSocket there is a 10sec timer running which cuts
> the socket if still not connected.
>
> Is this the way it should be implemented, what about the TimeOut
> property it seems it doesn't work?
> Would be nice if users know after 10 secs that the socket is unable to
> connect, +2 minutes is too long...
>
> Regards,
> Ron.
>

Hi Ron,

I have implemented what Caveat told in revision #5696: the timeout is 
reset each time the blocking mode changes internally.

Can you try it and tell me if it changes anything for you?

-- 
Beno?t Minisini



From denis at ...3091...  Tue Jun  4 00:14:52 2013
From: denis at ...3091... (denisc)
Date: Mon, 3 Jun 2013 15:14:52 -0700 (PDT)
Subject: [Gambas-user] Fedora 17/18 Segmentation Faults
Message-ID: <1370297692830-42186.post@...3046...>

Hi guys,

Before I start delving into core dumps
and/or bothering Beno?t etc.

Are there any known problems with Fedora 17 or 18?


I continually get Segmentation Faults for no "apparent" reason
BUT not always.

Almost positive it's not Gambas.

I've tried;
Fedora 17: i3, 8gb ram
-multiple kernels, latest 3.8.13-100.fc17.i686.PAE
-multiple Gambas3, latest 5693

Fedora 18: vmware, 1gb ram, both i686 & 64bit
-Gambas 5693


Example:

"The program has stopped unexpectedly:
Aborted (6)"

or if I use the new static public method "Application_Error"

"The program has stopped unexpectedly:
Segmentation fault (11)"

in both cases the console showed;

loaded the Generic plugin
FMain.pbParseWebpage_Click.133: no tables 5
FMain.pbParseWebpage_Click.140: count 1
FMain.pbParseWebpage_Click.140: count 2
FMain.pbParseWebpage_Click.140: count 3
FMain.pbParseWebpage_Click.140: count 4
FMain.pbParseWebpage_Click.140: count 5
FMain.pbParseWebpage_Click.152: finish ================================
*** glibc detected *** Scraping_05: double free or corruption (out):
0x09f18c20 ***
======= Backtrace: =========
/lib/libc.so.6[0x46c1c8c9]
/lib/libstdc++.so.6(_ZdlPv+0x20)[0x47105ba0]
/lib/libQtWebKit.so.4(_ZN11QWebElementD1Ev+0x25)[0x4bb66335]
/usr/lib/gambas3/gb.qt4.webkit.so(+0x87d3)[0xb6c4c7d3]
Scraping_05[0x8051a46]
Scraping_05[0x80520e1]
etc etc


Note...
After the line
FMain.pbParseWebpage_Click.152: finish ================================
there is no more code, only the 'end' of the sub

-- 
Regards
Denis



--
View this message in context: http://gambas.8142.n7.nabble.com/Fedora-17-18-Segmentation-Faults-tp42186.html
Sent from the gambas-user mailing list archive at Nabble.com.



From denis at ...3091...  Tue Jun  4 00:03:13 2013
From: denis at ...3091... (Denis Crowther)
Date: Tue, 04 Jun 2013 08:03:13 +1000
Subject: [Gambas-user] Fedora 17/18 Segmentation Faults
Message-ID: <51AD12A1.8060904@...3091...>

Hi guys,

Before I start delving into core dumps
and/or bothering Beno?t Minisini etc.

Are there any known problems with Fedora 17 or 18?


I continually get Segmentation Faults for no "apparent" reason
BUT not always.

Almost positive it's not Gambas.

I've tried;
Fedora 17: i3, 8gb ram
-multiple kernels, latest 3.8.13-100.fc17.i686.PAE
-multiple Gambas3, latest 5693

Fedora 18: vmware, 1gb ram, both i686 & 64bit
-Gambas 5693


Example:

Note...
After the line
FMain.pbParseWebpage_Click.152: finish ================================
there is no more code, only the 'end' of the sub



"The program has stopped unexpectedly:
Aborted (6)"

or if I use the new static public method "Application_Error"

"The program has stopped unexpectedly:
Segmentation fault (11)"

in both cases the console showed;

loaded the Generic plugin
FMain.pbParseWebpage_Click.133: no tables 5
FMain.pbParseWebpage_Click.140: count 1
FMain.pbParseWebpage_Click.140: count 2
FMain.pbParseWebpage_Click.140: count 3
FMain.pbParseWebpage_Click.140: count 4
FMain.pbParseWebpage_Click.140: count 5
FMain.pbParseWebpage_Click.152: finish ================================
*** glibc detected *** Scraping_05: double free or corruption (out): 
0x09f18c20 ***
======= Backtrace: =========
/lib/libc.so.6[0x46c1c8c9]
/lib/libstdc++.so.6(_ZdlPv+0x20)[0x47105ba0]
/lib/libQtWebKit.so.4(_ZN11QWebElementD1Ev+0x25)[0x4bb66335]
/usr/lib/gambas3/gb.qt4.webkit.so(+0x87d3)[0xb6c4c7d3]
Scraping_05[0x8051a46]
Scraping_05[0x80520e1]
etc etc

-- 
Regards
Denis



From ron at ...1740...  Tue Jun  4 16:54:45 2013
From: ron at ...1740... (Ron)
Date: Tue, 4 Jun 2013 16:54:45 +0200
Subject: [Gambas-user] Connect hang with latest revision
In-Reply-To: <51ACEB26.2000509@...1...>
References: <CAM+S5npU-_Hq0eZU1Z=i6Fbxw1ZeRVvrch7b1NDO0PTqAAg9SA@...627...>
	<51A79E47.6050607@...1...>
	<CAM+S5nqDHU+7mk8yzS4JF-Qsq2-Ss+_=OCEOewjJZ9Ug+U4=jw@...627...>
	<51A7A2DB.4060701@...1...>
	<CAM+S5nriwH6vSALXg-YSDGCC44pMFX6iNnAfna5o1JXocbUa7g@...627...>
	<51A9F9F7.7070704@...1...>
	<CAM+S5npf4-SDyhy8ESsfKgH1ny2bgmMGDsbKmFY+6O=Kxr81AQ@...627...>
	<51ACEB26.2000509@...1...>
Message-ID: <CAM+S5nrRs17maw8HwJTAT_zphLkwKnCMEi0D1ciNL1sDD86Rtw@...627...>

I tried it,
without specifying .Blocking or .Timeout the _Error event is still
triggered after +2 minutes.

With specified .Timeout = 10 * 1000 (10secs) the same, after +2 minutes.

When specifying .Blocking (either True or False) you get this directly
when opening:
Error: Stream is closed


Regards,
Ron_2nd.


2013/6/3 Beno?t Minisini <gambas at ...1...>:
> Le 02/06/2013 17:05, Ron a ?crit :
>> Bug #1 and Bug #2 are fixed, thanks for that!
>>
>> The time it takes for Event_Error to trigger is still more than 2 minutes.
>> I see that in ClientSocket there is a 10sec timer running which cuts
>> the socket if still not connected.
>>
>> Is this the way it should be implemented, what about the TimeOut
>> property it seems it doesn't work?
>> Would be nice if users know after 10 secs that the socket is unable to
>> connect, +2 minutes is too long...
>>
>> Regards,
>> Ron.
>>
>
> Hi Ron,
>
> I have implemented what Caveat told in revision #5696: the timeout is
> reset each time the blocking mode changes internally.
>
> Can you try it and tell me if it changes anything for you?
>
> --
> Beno?t Minisini
>
> ------------------------------------------------------------------------------
> How ServiceNow helps IT people transform IT departments:
> 1. A cloud service to automate IT design, transition and operations
> 2. Dashboards that offer high-level views of enterprise services
> 3. A single system of record for all IT processes
> http://p.sf.net/sfu/servicenow-d2d-j
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user



From gambas.fr at ...626...  Tue Jun  4 19:17:48 2013
From: gambas.fr at ...626... (Fabien Bodard)
Date: Tue, 4 Jun 2013 19:17:48 +0200
Subject: [Gambas-user] The WebCam Examples crash
In-Reply-To: <51ACD7D0.6070005@...1...>
References: <51A7CF85.4090808@...1823...>
	<51AA28BD.3080407@...1...>
	<op.wx1p6tvgdlsaci@...2913...> <op.wx106teodlsaci@...2913...>
	<CAFkCsL7hncYFWXGxb4AOkBqOGm_E7UNtkGpgb+NMq2tjooBf1A@...627...>
	<51ACD772.7070900@...1...>
	<51ACD7D0.6070005@...1...>
Message-ID: <CAFkCsL7s1xVAP9NwiTattPsrZ+g0_wVdtwM0YGWN29JFFZNbOQ@...627...>

hooooo !!!
so i can display a film on my cube ?


2013/6/3 Beno?t Minisini <gambas at ...1...>

> Le 03/06/2013 19:50, Beno?t Minisini a ?crit :
> > Le 03/06/2013 16:17, Fabien Bodard a ?crit :
> >> But there is always the problem of how to grab the cam picture and put
> it
> >> in the image stream, to be able to map it every where ... like in an ogl
> >> texture ?
> >>
> >
> > It's on its way...
> >
>
> Here it is, in revision #5694.
>
> MediaPlayer.Video.Image is a new property that returns an Image of the
> current (or last) displayed frame.
>
> --
> Beno?t Minisini
>
>
> ------------------------------------------------------------------------------
> Get 100% visibility into Java/.NET code with AppDynamics Lite
> It's a free troubleshooting tool designed for production
> Get down to code-level detail for bottlenecks, with <2% overhead.
> Download for free and get started troubleshooting in minutes.
> http://p.sf.net/sfu/appdyn_d2d_ap2
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>



-- 
Fabien Bodard


From gambas at ...1...  Tue Jun  4 20:31:41 2013
From: gambas at ...1... (=?ISO-8859-1?Q?Beno=EEt_Minisini?=)
Date: Tue, 04 Jun 2013 20:31:41 +0200
Subject: [Gambas-user] The WebCam Examples crash
In-Reply-To: <CAFkCsL7s1xVAP9NwiTattPsrZ+g0_wVdtwM0YGWN29JFFZNbOQ@...627...>
References: <51A7CF85.4090808@...1823...>
	<51AA28BD.3080407@...1...>
	<op.wx1p6tvgdlsaci@...2913...> <op.wx106teodlsaci@...2913...>
	<CAFkCsL7hncYFWXGxb4AOkBqOGm_E7UNtkGpgb+NMq2tjooBf1A@...627...>
	<51ACD772.7070900@...1...>
	<51ACD7D0.6070005@...1...>
	<CAFkCsL7s1xVAP9NwiTattPsrZ+g0_wVdtwM0YGWN29JFFZNbOQ@...627...>
Message-ID: <51AE328D.3040708@...1...>

Le 04/06/2013 19:17, Fabien Bodard a ?crit :
> hooooo !!!
> so i can display a film on my cube ?
>

Maybe, but it will not be the fastest way, as that Image property 
creates a copy of the video screenshot data, that will be converted to 
an OpenGL texture, with another copy I guess.

-- 
Beno?t Minisini



From bbruen at ...2308...  Wed Jun  5 02:45:27 2013
From: bbruen at ...2308... (Bruce)
Date: Wed, 05 Jun 2013 10:15:27 +0930
Subject: [Gambas-user] ValueBox (Date) detecting a change in the Value
Message-ID: <1370393127.16071.15.camel@...2688...>

(I must be having a senior moment!)

I am using a ValueBox to allow the user to select a date which is a
partial key for a database read. But, how can I detect that the user has
altered the value and so initiate the db read?

The full key consists of a string value from a preceding combobox
control and the date from this control. So the overall logic I need to
achieve is
1) cboVenue_LostFocus
    If the valDate.Value <> 0 then ReadDB(cboVenue.Current.Text,
valDate.Value) otherwise valDate.SetFocus (this works fine)

2) valDate_???
    If cboVenue.Current.Text then ReadDB(cboVenue.Current.Text,
valDate.Value) otherwise cboVenue.SetFocus

valDate_LostFocus fires if the user tabs from the ValueBox textbox into
the button, at which point the date has not been set.

The "dwgMonth" control (the calendar popup) does not seem to raise
events.

The user could enter the date as text in the ValueBox text area or use
the calendar popup to select a date and either press the return key or
double click the mouse. Both the latter result in the focus going back
to the ValueBox text area.

tia
Bruce








From gambas at ...1...  Wed Jun  5 02:52:58 2013
From: gambas at ...1... (=?ISO-8859-1?Q?Beno=EEt_Minisini?=)
Date: Wed, 05 Jun 2013 02:52:58 +0200
Subject: [Gambas-user] ValueBox (Date) detecting a change in the Value
In-Reply-To: <1370393127.16071.15.camel@...2688...>
References: <1370393127.16071.15.camel@...2688...>
Message-ID: <51AE8BEA.7010204@...1...>

Le 05/06/2013 02:45, Bruce a ?crit :
> (I must be having a senior moment!)
>
> I am using a ValueBox to allow the user to select a date which is a
> partial key for a database read. But, how can I detect that the user has
> altered the value and so initiate the db read?
>
> The full key consists of a string value from a preceding combobox
> control and the date from this control. So the overall logic I need to
> achieve is
> 1) cboVenue_LostFocus
>      If the valDate.Value <> 0 then ReadDB(cboVenue.Current.Text,
> valDate.Value) otherwise valDate.SetFocus (this works fine)
>
> 2) valDate_???
>      If cboVenue.Current.Text then ReadDB(cboVenue.Current.Text,
> valDate.Value) otherwise cboVenue.SetFocus
>
> valDate_LostFocus fires if the user tabs from the ValueBox textbox into
> the button, at which point the date has not been set.
>
> The "dwgMonth" control (the calendar popup) does not seem to raise
> events.
>
> The user could enter the date as text in the ValueBox text area or use
> the calendar popup to select a date and either press the return key or
> double click the mouse. Both the latter result in the focus going back
> to the ValueBox text area.
>
> tia
> Bruce
>

Mmm, I think you need ValueBox to raise sort of "Change" event, don't you?

-- 
Beno?t Minisini



From bbruen at ...2308...  Wed Jun  5 03:18:27 2013
From: bbruen at ...2308... (Bruce)
Date: Wed, 05 Jun 2013 10:48:27 +0930
Subject: [Gambas-user] ValueBox (Date) detecting a change in the Value
In-Reply-To: <51AE8BEA.7010204@...1...>
References: <1370393127.16071.15.camel@...2688...>
	<51AE8BEA.7010204@...1...>
Message-ID: <1370395107.16071.16.camel@...2688...>

On Wed, 2013-06-05 at 02:52 +0200, Beno?t Minisini wrote:
> Le 05/06/2013 02:45, Bruce a ?crit :
> > (I must be having a senior moment!)
> >
> > I am using a ValueBox to allow the user to select a date which is a
> > partial key for a database read. But, how can I detect that the user has
> > altered the value and so initiate the db read?
> >
> > The full key consists of a string value from a preceding combobox
> > control and the date from this control. So the overall logic I need to
> > achieve is
> > 1) cboVenue_LostFocus
> >      If the valDate.Value <> 0 then ReadDB(cboVenue.Current.Text,
> > valDate.Value) otherwise valDate.SetFocus (this works fine)
> >
> > 2) valDate_???
> >      If cboVenue.Current.Text then ReadDB(cboVenue.Current.Text,
> > valDate.Value) otherwise cboVenue.SetFocus
> >
> > valDate_LostFocus fires if the user tabs from the ValueBox textbox into
> > the button, at which point the date has not been set.
> >
> > The "dwgMonth" control (the calendar popup) does not seem to raise
> > events.
> >
> > The user could enter the date as text in the ValueBox text area or use
> > the calendar popup to select a date and either press the return key or
> > double click the mouse. Both the latter result in the focus going back
> > to the ValueBox text area.
> >
> > tia
> > Bruce
> >
> 
> Mmm, I think you need ValueBox to raise sort of "Change" event, don't you?
> 
 Given the multiplicity of ways for the user to create a value, yes.

B




From ea7dfh at ...2382...  Wed Jun  5 18:41:41 2013
From: ea7dfh at ...2382... (Jesus)
Date: Wed, 05 Jun 2013 18:41:41 +0200
Subject: [Gambas-user] ValueBox (Date) detecting a change in the Value
In-Reply-To: <51AE8BEA.7010204@...1...>
References: <1370393127.16071.15.camel@...2688...>
	<51AE8BEA.7010204@...1...>
Message-ID: <51AF6A45.9000008@...2382...>

El 05/06/13 02:52, Beno?t Minisini escribi?:

<stripped>

>
> Mmm, I think you need ValueBox to raise sort of "Change" event, don't you?
>

That's something that someone else was waiting for ;-)

Read the quote below.

Regards

Jesus Guardon

>
>
> Le 10/03/2013 18:34, Jesus a ?crit :
>> Hi all
>>
>> Since gambas2 I've not used Valuebox until now in Gambas3, but now I'm
>> surprised it haven't a '_Change()' event. Anyone could tell about it, if
>> you have got the need of this event or not? And how I supposedly could
>> detect whether its content has changed?
>>
>> Of course, I always can inherit and implement a change event, but I was
>> curious on why this widget lacks the change event natively.
>>
>> Thanks for your time
>>
>> Best regards
>>
>
> Mmm... You're right, a Change event would be useful... I will see if I
> can add it...
>
> As a workaround, you can create an observer on the first inner child of
> the control to catch it.
>
> hObs = New Observer(TheValueBox.Children[0]) As "TheValueBox"
> ...
> Public Sub TheValueBox_Change()
> ...
> End
>
> But beware that you must do it just after having set the Type property
> (because it recreates the inner widget each time you change the ValueBox
> type).
>
> Regards,
>
> -- Beno?t Minisini

-- 
Jesus Guardon



From munix9 at ...1601...  Thu Jun  6 11:09:59 2013
From: munix9 at ...1601... (munix9)
Date: Thu, 06 Jun 2013 11:09:59 +0200
Subject: [Gambas-user] examples/MyWebCam and gambas 3.4.1 (gstreamer-0_10)
Message-ID: <51B051E7.3090208@...1601...>

hi,

attached is a modified examples/MyWebCam which works with gambas 3.4.1 and gstreamer-0_10
(tested on openSUSE 12.3 with gstreamer 0.10.36)

ciao
paolo
-------------- next part --------------
A non-text attachment was scrubbed...
Name: MyWebCam-3.3.90.tar.gz
Type: application/x-gzip
Size: 19925 bytes
Desc: not available
URL: <http://lists.gambas-basic.org/pipermail/user/attachments/20130606/0c01d016/attachment.bin>

From shordi at ...626...  Thu Jun  6 12:04:59 2013
From: shordi at ...626... (=?ISO-8859-1?Q?Jorge_Carri=F3n?=)
Date: Thu, 6 Jun 2013 12:04:59 +0200
Subject: [Gambas-user] About Client FTP
Message-ID: <CAOx-q9uJ0pRX3TPR=6W-vxuxb6uJ6swknkab--uQvD+5GQaUHA@...627...>

Using the ClientFtp control I have a behavior that I don't know if its a
bug o its somthing supposed to happen:

When I use the exec method, it works fine, but after all comands in exec
allways perform a

CWD name-of-folder who fails an generate an error.

Example:

Exec(["CWD /personales/jorge", "rnfr gabinete.cfg", "rnto gaginsete.cfg"])

generates the following output in the console of Gambas:

* About to connect() to the-ip-server port 21 (#0)
*   Trying the-ipserver... * connected
< 220 (vsFTPd 2.3.5)
> USER gabinete
< 331 Please specify the password.
> PASS thesecrectpassword
< 230 Login successful.
> PWD
< 257 "/"
* Entry path is '/'
> CWD /personales/jorge/
< 250 Directory successfully changed.
> rnfr gabinete.cfg
< 350 Ready for RNTO.
> rnto gabinsete.cfg
< 250 Rename successful.
> CWD personales          <<<<-------This is the command who comes from
nowhere!!!
< 550 Failed to change directory.
* Server denied you to change to the given directory
* Connection #0 to host 84.127.229.244 left intact
* Access denied to remote resource
> QUIT
< 221 Goodbye.
* Closing connection #0

This makes very difficult to test if the operation has been successfull or
failed.
?How can I prevent this behavior of FtpClient?

Regards


From gambas at ...2524...  Thu Jun  6 12:43:29 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Thu, 06 Jun 2013 10:43:29 +0000
Subject: [Gambas-user] Issue 437 in gambas: Add Windows Code Explorer
Message-ID: <0-6813199134517018827-1477046831407902484-gambas=googlecode.com@...2524...>

Status: New
Owner: ----
Labels: Version-3.4.0 Priority-Medium OpSys-Any Desktop-Any

New issue 437 by torredel... at ...626...: Add Windows Code Explorer
http://code.google.com/p/gambas/issues/detail?id=437

Add enhancement to Gambas Ide:

I would like to request that you add the following enhancement:
A Code Explorer window, like the image attached.

Regards


jsbsan


Attachments:
	Code Explorer.PNG  25.6 KB

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From gambas at ...2524...  Thu Jun  6 19:31:56 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Thu, 06 Jun 2013 17:31:56 +0000
Subject: [Gambas-user] Issue 437 in gambas: Add Windows Code Explorer
In-Reply-To: <0-6813199134517018827-1477046831407902484-gambas=googlecode.com@...2524...>
References: <0-6813199134517018827-1477046831407902484-gambas=googlecode.com@...2524...>
Message-ID: <1-6813199134517018827-1477046831407902484-gambas=googlecode.com@...2524...>


Comment #1 on issue 437 by torredel... at ...626...: Add Windows Code Explorer
http://code.google.com/p/gambas/issues/detail?id=437


Note:
The usefulness is that when you click on any item in the code editor  
appears the property / method / class / module where you pressed, code  
editing easier.

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From mcturra2000 at ...370...  Fri Jun  7 00:53:11 2013
From: mcturra2000 at ...370... (Mark Carter)
Date: Thu, 6 Jun 2013 23:53:11 +0100 (BST)
Subject: [Gambas-user] hi.
Message-ID: <1370559191.73757.YahooMailNeo@...3143...>



 http://kamawet.pl/wiitq/sgj.php 












  



















From Gambas at ...1950...  Fri Jun  7 07:38:39 2013
From: Gambas at ...1950... (Caveat)
Date: Fri, 07 Jun 2013 07:38:39 +0200
Subject: [Gambas-user] Connect hang with latest revision
In-Reply-To: <51ACEB26.2000509@...1...>
References: <CAM+S5npU-_Hq0eZU1Z=i6Fbxw1ZeRVvrch7b1NDO0PTqAAg9SA@...627...>
	<51A79E47.6050607@...1...>
	<CAM+S5nqDHU+7mk8yzS4JF-Qsq2-Ss+_=OCEOewjJZ9Ug+U4=jw@...627...>
	<51A7A2DB.4060701@...1...>
	<CAM+S5nriwH6vSALXg-YSDGCC44pMFX6iNnAfna5o1JXocbUa7g@...627...>
	<51A9F9F7.7070704@...1...>
	<CAM+S5npf4-SDyhy8ESsfKgH1ny2bgmMGDsbKmFY+6O=Kxr81AQ@...627...>
	<51ACEB26.2000509@...1...>
Message-ID: <51B171DF.7090303@...1950...>

Hmmm... well I've taken a quick glance at the source and the 
documentation (Shock news! Developer looks at documentation!!!) and it 
looks like it's less simple than we thought.

When making a connection, it seems as if Gambas insists on using 
Blocking mode True internally, there is no storage or remembering of the 
original Blocking mode, so as far as I can see any setting of Blocking 
mode prior to making a connect is not going to be useful anyway.  In 
fact, from reading the documentation of Gambas 
(http://gambasdoc.org/help/comp/gb.net/socket?v3), it looks like it's 
expected that all Socket comms will be be in non-Blocking (asynchronous) 
mode:

"This class performs its work asynchronously, so the program will not be 
stopped while connecting, sending or receiving data. "

Also it looks like the code relating to Blocking/non-Blocking is 
provided by the Stream class which Socket inherits.  I think if we're 
going to make it possible for the user to specify whether they want 
Blocking or not, and by implication, set a Timeout value... it will need 
a little more work than just a tweak to call set_timeout whenever 
set_blocking is called...

Kind regards,
Caveat

On 03/06/13 21:14, Beno?t Minisini wrote:
> Le 02/06/2013 17:05, Ron a ?crit :
>> Bug #1 and Bug #2 are fixed, thanks for that!
>>
>> The time it takes for Event_Error to trigger is still more than 2 minutes.
>> I see that in ClientSocket there is a 10sec timer running which cuts
>> the socket if still not connected.
>>
>> Is this the way it should be implemented, what about the TimeOut
>> property it seems it doesn't work?
>> Would be nice if users know after 10 secs that the socket is unable to
>> connect, +2 minutes is too long...
>>
>> Regards,
>> Ron.
>>
> Hi Ron,
>
> I have implemented what Caveat told in revision #5696: the timeout is
> reset each time the blocking mode changes internally.
>
> Can you try it and tell me if it changes anything for you?
>




From abbat.81 at ...787...  Fri Jun  7 08:25:12 2013
From: abbat.81 at ...787... (abbat81)
Date: Thu, 6 Jun 2013 23:25:12 -0700 (PDT)
Subject: [Gambas-user] Draw a form over OpenGL
Message-ID: <1370586311874-42202.post@...3046...>

I need to make some notification form.
That form must be over any application running. Games too.

I tried to make it to TopOnly in a Timer, but it's not helpfull.

Is there any way to redraw a form?

Thanks.



--
View this message in context: http://gambas.8142.n7.nabble.com/Draw-a-form-over-OpenGL-tp42202.html
Sent from the gambas-user mailing list archive at Nabble.com.



From ron at ...1740...  Fri Jun  7 08:49:55 2013
From: ron at ...1740... (Ron)
Date: Fri, 07 Jun 2013 08:49:55 +0200
Subject: [Gambas-user] Connect hang with latest revision
In-Reply-To: <51B171DF.7090303@...1950...>
References: <CAM+S5npU-_Hq0eZU1Z=i6Fbxw1ZeRVvrch7b1NDO0PTqAAg9SA@...627...>
	<51A79E47.6050607@...1...>
	<CAM+S5nqDHU+7mk8yzS4JF-Qsq2-Ss+_=OCEOewjJZ9Ug+U4=jw@...627...>
	<51A7A2DB.4060701@...1...>
	<CAM+S5nriwH6vSALXg-YSDGCC44pMFX6iNnAfna5o1JXocbUa7g@...627...>
	<51A9F9F7.7070704@...1...>
	<CAM+S5npf4-SDyhy8ESsfKgH1ny2bgmMGDsbKmFY+6O=Kxr81AQ@...627...>
	<51ACEB26.2000509@...1...>
	<51B171DF.7090303@...1950...>
Message-ID: <51B18292.8020303@...1740...>

Thanks.
The blocking mode issue is not that bad, since I always want to use 
non-blocking mode anyway, my project is too big to be interupted by sockets.

About the timeout I thought gambas2 did this correctly, but I'm not sure 
now, since the ClientSocket example uses a timer to remove Socket if it 
isn't connected in 10 seconds.

Regards,
Ron_2nd.
> Hmmm... well I've taken a quick glance at the source and the
> documentation (Shock news! Developer looks at documentation!!!) and it
> looks like it's less simple than we thought.
>
> When making a connection, it seems as if Gambas insists on using
> Blocking mode True internally, there is no storage or remembering of the
> original Blocking mode, so as far as I can see any setting of Blocking
> mode prior to making a connect is not going to be useful anyway.  In
> fact, from reading the documentation of Gambas
> (http://gambasdoc.org/help/comp/gb.net/socket?v3), it looks like it's
> expected that all Socket comms will be be in non-Blocking (asynchronous)
> mode:
>
> "This class performs its work asynchronously, so the program will not be
> stopped while connecting, sending or receiving data. "
>
> Also it looks like the code relating to Blocking/non-Blocking is
> provided by the Stream class which Socket inherits.  I think if we're
> going to make it possible for the user to specify whether they want
> Blocking or not, and by implication, set a Timeout value... it will need
> a little more work than just a tweak to call set_timeout whenever
> set_blocking is called...
>
> Kind regards,
> Caveat
>
> On 03/06/13 21:14, Beno?t Minisini wrote:
>> Le 02/06/2013 17:05, Ron a ?crit :
>>> Bug #1 and Bug #2 are fixed, thanks for that!
>>>
>>> The time it takes for Event_Error to trigger is still more than 2 minutes.
>>> I see that in ClientSocket there is a 10sec timer running which cuts
>>> the socket if still not connected.
>>>
>>> Is this the way it should be implemented, what about the TimeOut
>>> property it seems it doesn't work?
>>> Would be nice if users know after 10 secs that the socket is unable to
>>> connect, +2 minutes is too long...
>>>
>>> Regards,
>>> Ron.
>>>
>> Hi Ron,
>>
>> I have implemented what Caveat told in revision #5696: the timeout is
>> reset each time the blocking mode changes internally.
>>
>> Can you try it and tell me if it changes anything for you?
>>
>
> ------------------------------------------------------------------------------
> How ServiceNow helps IT people transform IT departments:
> 1. A cloud service to automate IT design, transition and operations
> 2. Dashboards that offer high-level views of enterprise services
> 3. A single system of record for all IT processes
> http://p.sf.net/sfu/servicenow-d2d-j
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user




From ron at ...1740...  Fri Jun  7 09:52:37 2013
From: ron at ...1740... (Ron)
Date: Fri, 07 Jun 2013 09:52:37 +0200
Subject: [Gambas-user] Connect hang with latest revision
In-Reply-To: <51B18292.8020303@...1740...>
References: <CAM+S5npU-_Hq0eZU1Z=i6Fbxw1ZeRVvrch7b1NDO0PTqAAg9SA@...627...>
	<51A79E47.6050607@...1...>
	<CAM+S5nqDHU+7mk8yzS4JF-Qsq2-Ss+_=OCEOewjJZ9Ug+U4=jw@...627...>
	<51A7A2DB.4060701@...1...>
	<CAM+S5nriwH6vSALXg-YSDGCC44pMFX6iNnAfna5o1JXocbUa7g@...627...>
	<51A9F9F7.7070704@...1...>
	<CAM+S5npf4-SDyhy8ESsfKgH1ny2bgmMGDsbKmFY+6O=Kxr81AQ@...627...>
	<51ACEB26.2000509@...1...>
	<51B171DF.7090303@...1950...>
	<51B18292.8020303@...1740...>
Message-ID: <51B19145.9040501@...1740...>

I just checked, gambas2 didn't/doesn't respect timeout either in this 
case when a hiost cannot be reached.
And reports after 2+ minutes.
So it was always like this, maybe because of the fact that it was 
difficult to implement?

Regards,
Ron.

> Thanks.
> The blocking mode issue is not that bad, since I always want to use 
> non-blocking mode anyway, my project is too big to be interupted by 
> sockets.
>
> About the timeout I thought gambas2 did this correctly, but I'm not 
> sure now, since the ClientSocket example uses a timer to remove Socket 
> if it isn't connected in 10 seconds.
>
> Regards,
> Ron_2nd.
>> Hmmm... well I've taken a quick glance at the source and the
>> documentation (Shock news! Developer looks at documentation!!!) and it
>> looks like it's less simple than we thought.
>>
>> When making a connection, it seems as if Gambas insists on using
>> Blocking mode True internally, there is no storage or remembering of the
>> original Blocking mode, so as far as I can see any setting of Blocking
>> mode prior to making a connect is not going to be useful anyway.  In
>> fact, from reading the documentation of Gambas
>> (http://gambasdoc.org/help/comp/gb.net/socket?v3), it looks like it's
>> expected that all Socket comms will be be in non-Blocking (asynchronous)
>> mode:
>>
>> "This class performs its work asynchronously, so the program will not be
>> stopped while connecting, sending or receiving data. "
>>
>> Also it looks like the code relating to Blocking/non-Blocking is
>> provided by the Stream class which Socket inherits.  I think if we're
>> going to make it possible for the user to specify whether they want
>> Blocking or not, and by implication, set a Timeout value... it will need
>> a little more work than just a tweak to call set_timeout whenever
>> set_blocking is called...
>>
>> Kind regards,
>> Caveat
>>
>> On 03/06/13 21:14, Beno?t Minisini wrote:
>>> Le 02/06/2013 17:05, Ron a ?crit :
>>>> Bug #1 and Bug #2 are fixed, thanks for that!
>>>>
>>>> The time it takes for Event_Error to trigger is still more than 2 
>>>> minutes.
>>>> I see that in ClientSocket there is a 10sec timer running which cuts
>>>> the socket if still not connected.
>>>>
>>>> Is this the way it should be implemented, what about the TimeOut
>>>> property it seems it doesn't work?
>>>> Would be nice if users know after 10 secs that the socket is unable to
>>>> connect, +2 minutes is too long...
>>>>
>>>> Regards,
>>>> Ron.
>>>>
>>> Hi Ron,
>>>
>>> I have implemented what Caveat told in revision #5696: the timeout is
>>> reset each time the blocking mode changes internally.
>>>
>>> Can you try it and tell me if it changes anything for you?
>>>
>>
>> ------------------------------------------------------------------------------ 
>>
>> How ServiceNow helps IT people transform IT departments:
>> 1. A cloud service to automate IT design, transition and operations
>> 2. Dashboards that offer high-level views of enterprise services
>> 3. A single system of record for all IT processes
>> http://p.sf.net/sfu/servicenow-d2d-j
>> _______________________________________________
>> Gambas-user mailing list
>> Gambas-user at lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/gambas-user
>




From gambas at ...2524...  Sat Jun  8 12:00:32 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Sat, 08 Jun 2013 10:00:32 +0000
Subject: [Gambas-user] Issue 438 in gambas: gb.xml.rpc sometimes doesn't
 parse data correctly due to incompleteness of received data
Message-ID: <0-6813199134517018827-16924913522877771443-gambas=googlecode.com@...2524...>

Status: New
Owner: ----
Labels: Version Type-Bug Priority-Medium OpSys-Any Dist-Any Arch-Any  
Desktop-Any GUI-Any

New issue 438 by r... at ...1740...: gb.xml.rpc sometimes doesn't parse  
data correctly due to incompleteness of received data
http://code.google.com/p/gambas/issues/detail?id=438

1) Describe the problem.

XMLRPC server and client communication is faulty because of a timing issue  
on certain systems.

2) GIVE THE FOLLOWING INFORMATIONS (if they are appropriate):

Version: TRUNK
[System]
OperatingSystem=Linux
Kernel=3.8.0-23-generic
Architecture=x86_64
Distribution=Ubuntu 13.04
Desktop=GNOME
Theme=QGtk
Language=en_US.UTF-8
Memory=7954M

[Libraries]
Curl=libcurl.so.4.3.0
GStreamer=libgstreamer-0.10.so.0.30.0
GTK+=libgtk-x11-2.0.so.0.2400.17
Qt4=libQtCore.so.4.8.4
SDL=libSDL-1.2.so.0.11.4
Poppler=libpoppler.so.28.0.0

3) Provide a little project that reproduces the bug or the crash.
Difficult to reproduce, since it depends on speed of system and network.

4) If your project needs a database, try to provide it, or part of it.
N/A.

5) Explain clearly how to reproduce the bug or the crash.

It can be fixed by this workaround:
Insert a Sleep 0.1 at the beginning of Socket_Read() in miniServer.module:
-----
Public Sub Socket_Read()

   Dim Buf As String
   Dim sCad As String
   Dim Bucle As Integer
   Dim hS As Socket

   Sleep 0.1

   For Bucle = 0 To hSocket.Count - 1
     If hSocket[Bucle] = Last Then
       hS = Last
       Break
     End If
   Next
------
Maybe a better way is to check in Socket_Read for completeness of the  
received data and then proceed processing it.

Can someone apply the patch?
At least it fixes problems on a lot of systems.

Read here for more background information:
http://domotiga.nl/boards/1/topics/1700

6) By doing that carefully, you have done 50% of the bug fix job!

IMPORTANT NOTE: if you encounter several different problems or bugs, (for
example, a bug in your project, and an interpreter crash while debugging
it), please create distinct issues!

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From gambas at ...1...  Sat Jun  8 17:00:30 2013
From: gambas at ...1... (=?ISO-8859-1?Q?Beno=EEt_Minisini?=)
Date: Sat, 08 Jun 2013 17:00:30 +0200
Subject: [Gambas-user] Connect hang with latest revision
In-Reply-To: <51B19145.9040501@...1740...>
References: <CAM+S5npU-_Hq0eZU1Z=i6Fbxw1ZeRVvrch7b1NDO0PTqAAg9SA@...627...>
	<51A79E47.6050607@...1...>
	<CAM+S5nqDHU+7mk8yzS4JF-Qsq2-Ss+_=OCEOewjJZ9Ug+U4=jw@...627...>
	<51A7A2DB.4060701@...1...>
	<CAM+S5nriwH6vSALXg-YSDGCC44pMFX6iNnAfna5o1JXocbUa7g@...627...>
	<51A9F9F7.7070704@...1...>
	<CAM+S5npf4-SDyhy8ESsfKgH1ny2bgmMGDsbKmFY+6O=Kxr81AQ@...627...>
	<51ACEB26.2000509@...1...>
	<51B171DF.7090303@...1950...>
	<51B18292.8020303@...1740...> <51B19145.9040501@...1740...>
Message-ID: <51B3470E.2040400@...1...>

Le 07/06/2013 09:52, Ron a ?crit :
> I just checked, gambas2 didn't/doesn't respect timeout either in this
> case when a hiost cannot be reached.
> And reports after 2+ minutes.
> So it was always like this, maybe because of the fact that it was
> difficult to implement?
>
> Regards,
> Ron.
>

I have to fix the Socket.Blocking property that mixes up with the 
internal management of the socket which changes the blocking state of 
the socket.

Anyway, I think that this timeout value may be valid for some states of 
the socket, but not all.

I will check the internal call to DnsClient when connecting to the 
socket to see if there is a timeout too there.

Regards,

-- 
Beno?t Minisini



From ihaywood at ...1979...  Sun Jun  9 07:02:09 2013
From: ihaywood at ...1979... (Ian Haywood)
Date: Sun, 9 Jun 2013 15:02:09 +1000
Subject: [Gambas-user] leaving .ShowDialog() via an exception can crash Qt
Message-ID: <CAKt6K_e3TksN7xsiG8_7UE8V5Tx7S9258892Jyj5STai0FFcVg@...627...>

this is a contrived example in which Window.ShowDialog generates an
exception which is then caught by the calling code, this in turn makes
Qt crash with signal 11
I enclose the gdb stacktrace.

In my program I fixed it by catching and managing the error inside the
form on which ShowModal is called, so ShowDialog returns an integer to
signify the error condition, not an exception.

Not sure whether this is worth fixing as it is admittedly a bizarre
way of dealing with errors: would be good if it can be a gambas error
instead of a signal 11
at least a warning in the docs that dialog boxes must manage their own
exceptions

Ian

(gdb) run
Starting program: /usr/bin/gbx3 ""
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
QCoreApplication::exec: The event loop is already running

Program received signal SIGSEGV, Segmentation fault.
0x00007ffff4aead54 in QEventLoop::exit(int) () from
/usr/lib/x86_64-linux-gnu/libQtCore.so.4
(gdb) bt
#0  0x00007ffff4aead54 in QEventLoop::exit(int) () from
/usr/lib/x86_64-linux-gnu/libQtCore.so.4
#1  0x00007ffff5db13ac in ?? () from /usr/lib/gambas3/gb.qt4.so
#2  0x00007ffff505f4ee in QWidget::event(QEvent*) () from
/usr/lib/x86_64-linux-gnu/libQtGui.so.4
#3  0x00007ffff500e894 in QApplicationPrivate::notify_helper(QObject*,
QEvent*) () from /usr/lib/x86_64-linux-gnu/libQtGui.so.4
#4  0x00007ffff5013713 in QApplication::notify(QObject*, QEvent*) ()
from /usr/lib/x86_64-linux-gnu/libQtGui.so.4
#5  0x00007ffff4aebe9c in QCoreApplication::notifyInternal(QObject*,
QEvent*) () from /usr/lib/x86_64-linux-gnu/libQtCore.so.4
#6  0x00007ffff505924d in
QWidgetPrivate::close_helper(QWidgetPrivate::CloseMode) () from
/usr/lib/x86_64-linux-gnu/libQtGui.so.4
#7  0x00007ffff5dafb2f in ?? () from /usr/lib/gambas3/gb.qt4.so
#8  0x00007ffff5db1293 in ?? () from /usr/lib/gambas3/gb.qt4.so
#9  0x00007ffff5da65fc in ?? () from /usr/lib/gambas3/gb.qt4.so
#10 0x00007ffff5da7048 in ?? () from /usr/lib/gambas3/gb.qt4.so
#11 0x00000000004047eb in ?? ()
#12 0x00007ffff711776d in __libc_start_main (main=0x404189, argc=2,
ubp_av=0x7fffffffe2d8, init=<optimised out>, fini=<optimised out>,
rtld_fini=<optimised out>,
    stack_end=0x7fffffffe2c8) at libc-start.c:226
#13 0x00000000004048e9 in ?? ()
#14 0x00007fffffffe2c8 in ?? ()
#15 0x000000000000001c in ?? ()
#16 0x0000000000000002 in ?? ()
#17 0x0000000000665e50 in ?? ()
#18 0x00007fffffffe585 in ?? ()
#19 0x0000000000000000 in ?? ()
(gdb) quit
-------------- next part --------------
A non-text attachment was scrubbed...
Name: test-qt-crash-0.0.1.tar.gz
Type: application/x-gzip
Size: 5011 bytes
Desc: not available
URL: <http://lists.gambas-basic.org/pipermail/user/attachments/20130609/fd635f91/attachment.bin>

From gambas at ...2524...  Sun Jun  9 23:02:05 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Sun, 09 Jun 2013 21:02:05 +0000
Subject: [Gambas-user] Issue 427 in gambas: gb.v4l2 and bt878 with video
	additional channels
In-Reply-To: <1-6813199134517018827-4544964015839853993-gambas=googlecode.com@...2524...>
References: <1-6813199134517018827-4544964015839853993-gambas=googlecode.com@...2524...>
	<0-6813199134517018827-4544964015839853993-gambas=googlecode.com@...2524...>
Message-ID: <2-6813199134517018827-4544964015839853993-gambas=googlecode.com@...2524...>


Comment #2 on issue 427 by linuxfx.... at ...626...: gb.v4l2 and bt878 with  
video additional channels
http://code.google.com/p/gambas/issues/detail?id=427

a channel is a video input. there boards Bt878  that have 16 video inputs,  
but the system only displays 4. eg: /dev/video0, /dev/video1, /dev/video2,  
/dev/video3. Programs such as mplayer, zoneminder and others can view other  
video inputs.

The question is:

It would be possible to implement the read of channels in gb.v4l2?

Thank you.

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From gambas at ...2524...  Sun Jun  9 23:18:07 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Sun, 09 Jun 2013 21:18:07 +0000
Subject: [Gambas-user] Issue 427 in gambas: gb.v4l2 and bt878 with video
	additional channels
In-Reply-To: <2-6813199134517018827-4544964015839853993-gambas=googlecode.com@...2524...>
References: <2-6813199134517018827-4544964015839853993-gambas=googlecode.com@...2524...>
	<0-6813199134517018827-4544964015839853993-gambas=googlecode.com@...2524...>
Message-ID: <3-6813199134517018827-4544964015839853993-gambas=googlecode.com@...2524...>

Updates:
	Status: WontFix

Comment #3 on issue 427 by benoit.m... at ...626...: gb.v4l2 and bt878 with  
video additional channels
http://code.google.com/p/gambas/issues/detail?id=427

The gb.v4l component will be deprecated soon and replaced by gb.media, that  
has v4l2 support through gstreamer.

Anyway, I didn't find yet if the v4l2src gstreamer plugin has support for  
selecting the channel.

The MediaPlayer example has now a button to display the contents of  
/dev/video0 only. It will be enhanced later.

I close the issue. If I forget to implement channel selection in gb.media  
(if it is possible of course), just tell me on the mailing-list or open a  
new issue!

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From gambas at ...2524...  Sun Jun  9 23:19:17 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Sun, 09 Jun 2013 21:19:17 +0000
Subject: [Gambas-user] Issue 436 in gambas: IconView + "DEL" Key Cause
 ScrollArea_KeyPress.823 OutofBound Exception
In-Reply-To: <0-6813199134517018827-3391587943369208557-gambas=googlecode.com@...2524...>
References: <0-6813199134517018827-3391587943369208557-gambas=googlecode.com@...2524...>
Message-ID: <1-6813199134517018827-3391587943369208557-gambas=googlecode.com@...2524...>

Updates:
	Labels: -Version-3.4.1 Version-3.4.0

Comment #1 on issue 436 by benoit.m... at ...626...: IconView + "DEL" Key  
Cause ScrollArea_KeyPress.823  OutofBound Exception
http://code.google.com/p/gambas/issues/detail?id=436

(No comment was entered for this change.)

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From gambas at ...2524...  Sun Jun  9 23:20:17 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Sun, 09 Jun 2013 21:20:17 +0000
Subject: [Gambas-user] Issue 437 in gambas: Add Windows Code Explorer
In-Reply-To: <1-6813199134517018827-1477046831407902484-gambas=googlecode.com@...2524...>
References: <1-6813199134517018827-1477046831407902484-gambas=googlecode.com@...2524...>
	<0-6813199134517018827-1477046831407902484-gambas=googlecode.com@...2524...>
Message-ID: <2-6813199134517018827-1477046831407902484-gambas=googlecode.com@...2524...>

Updates:
	Labels: Type-Enhancement

Comment #2 on issue 437 by benoit.m... at ...626...: Add Windows Code Explorer
http://code.google.com/p/gambas/issues/detail?id=437

(No comment was entered for this change.)

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From gambas at ...2524...  Sun Jun  9 23:21:17 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Sun, 09 Jun 2013 21:21:17 +0000
Subject: [Gambas-user] Issue 437 in gambas: Add Windows Code Explorer
In-Reply-To: <2-6813199134517018827-1477046831407902484-gambas=googlecode.com@...2524...>
References: <2-6813199134517018827-1477046831407902484-gambas=googlecode.com@...2524...>
	<0-6813199134517018827-1477046831407902484-gambas=googlecode.com@...2524...>
Message-ID: <3-6813199134517018827-1477046831407902484-gambas=googlecode.com@...2524...>

Updates:
	Labels: GUI-Any Arch-Any

Comment #3 on issue 437 by benoit.m... at ...626...: Add Windows Code Explorer
http://code.google.com/p/gambas/issues/detail?id=437

(No comment was entered for this change.)

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From gambas at ...2524...  Sun Jun  9 23:38:39 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Sun, 09 Jun 2013 21:38:39 +0000
Subject: [Gambas-user] Issue 436 in gambas: IconView + "DEL" Key Cause
 ScrollArea_KeyPress.823 OutofBound Exception
In-Reply-To: <1-6813199134517018827-3391587943369208557-gambas=googlecode.com@...2524...>
References: <1-6813199134517018827-3391587943369208557-gambas=googlecode.com@...2524...>
	<0-6813199134517018827-3391587943369208557-gambas=googlecode.com@...2524...>
Message-ID: <2-6813199134517018827-3391587943369208557-gambas=googlecode.com@...2524...>

Updates:
	Status: Fixed

Comment #2 on issue 436 by benoit.m... at ...626...: IconView + "DEL" Key  
Cause ScrollArea_KeyPress.823  OutofBound Exception
http://code.google.com/p/gambas/issues/detail?id=436

Fixed in revision #5697

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From gambas at ...2524...  Mon Jun 10 13:17:36 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Mon, 10 Jun 2013 11:17:36 +0000
Subject: [Gambas-user] Issue 438 in gambas: gb.xml.rpc sometimes doesn't
 parse data correctly due to incompleteness of received data
In-Reply-To: <0-6813199134517018827-16924913522877771443-gambas=googlecode.com@...2524...>
References: <0-6813199134517018827-16924913522877771443-gambas=googlecode.com@...2524...>
Message-ID: <1-6813199134517018827-16924913522877771443-gambas=googlecode.com@...2524...>


Comment #1 on issue 438 by uAle... at ...626...: gb.xml.rpc sometimes doesn't  
parse data correctly due to incompleteness of received data
http://code.google.com/p/gambas/issues/detail?id=438

I got a patch somewhere, which fixes this (i submitted it in a previous  
issue a while ago). My patch will wait until all data is received  
(according to the content-length) OR time-out after a few hunderd  
milliseconds.

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From gambas at ...2524...  Mon Jun 10 13:24:29 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Mon, 10 Jun 2013 11:24:29 +0000
Subject: [Gambas-user] Issue 438 in gambas: gb.xml.rpc sometimes doesn't
 parse data correctly due to incompleteness of received data
In-Reply-To: <1-6813199134517018827-16924913522877771443-gambas=googlecode.com@...2524...>
References: <1-6813199134517018827-16924913522877771443-gambas=googlecode.com@...2524...>
	<0-6813199134517018827-16924913522877771443-gambas=googlecode.com@...2524...>
Message-ID: <2-6813199134517018827-16924913522877771443-gambas=googlecode.com@...2524...>


Comment #2 on issue 438 by r... at ...1740...: gb.xml.rpc sometimes doesn't  
parse data correctly due to incompleteness of received data
http://code.google.com/p/gambas/issues/detail?id=438

That's a better solution of course!

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From eficara at ...626...  Mon Jun 10 19:13:39 2013
From: eficara at ...626... (robotop)
Date: Mon, 10 Jun 2013 10:13:39 -0700 (PDT)
Subject: [Gambas-user] Gambas2.7 on puppy linux: how to change TargetPort on
	UDP ?
Message-ID: <1370884419191-42218.post@...3046...>

Hello, I'm using Gambas2 for a very basic DNS server with limited features.
There are no problems receiving packets on port 53 via UDP socket. The
request is parsed and the answer is formed correctly and printed to a
message window, then the UDP TargetHost is set with the contents of
SourceHost and the TargetPort is set to 53; the problem is that the answer
UDP packet is sent on a different port (typ. 1031..1044). It seems that the
assignment UdpDnss.TargetPort = 53 is ignored; a confirmation is that if I
read back the value of UdpDnss.TargetPort, the value read is different from
53 and, again, typically in the range 1031..1044). How can I change that
port ? Is there a way to change the data directly accessing the memory
buffer where the stream is stored ? How to simulate the varptr function that
isn't present on gambas2 ? I can't upgrade my system to Gambas3, 'cause of
lack of resources on my HW (miniITX board with CF disk) and no package
available for Puppy Linux newer than 2.7 ; thank you in advance. I'll wait
for your suggestions...



--
View this message in context: http://gambas.8142.n7.nabble.com/Gambas2-7-on-puppy-linux-how-to-change-TargetPort-on-UDP-tp42218.html
Sent from the gambas-user mailing list archive at Nabble.com.


From taboege at ...626...  Mon Jun 10 20:02:04 2013
From: taboege at ...626... (Tobias Boege)
Date: Mon, 10 Jun 2013 20:02:04 +0200
Subject: [Gambas-user] Gambas3 on PuppyLinux
Message-ID: <20130610180204.GA765@...2774...>

Hi,

a recent post here reminded me that I tried to help someone to compile
Gambas3 on PuppyLinux. My first question is: if anyone has ever even heard
of this distro (I haven't), has anybody yet succeeded in compiling the trunk
on it?

The whole systems makes a strange impression to me from what I read. I don't
really want to bother with the details anyway. If there is no obvious
solution I'll let him down :-)

To clarify: we came very close to compiling the IDE but gb.qt4.* were still
missing and the other guy couldn't find appropriate packages. It may even be
lack of support for these libraries on PuppyLinux...?

A related question is: has anybody ever compiled Gambas statically? Would
that be possible? I mean: compile the components as shared libraries but
link their dependencies statically into them.

I know this is a dumb idea but it would be the last resort with all its
error-proneness.

Regards,
Tobi



From gambas at ...2524...  Mon Jun 10 20:58:08 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Mon, 10 Jun 2013 18:58:08 +0000
Subject: [Gambas-user] Issue 438 in gambas: gb.xml.rpc sometimes doesn't
 parse data correctly due to incompleteness of received data
In-Reply-To: <2-6813199134517018827-16924913522877771443-gambas=googlecode.com@...2524...>
References: <2-6813199134517018827-16924913522877771443-gambas=googlecode.com@...2524...>
	<0-6813199134517018827-16924913522877771443-gambas=googlecode.com@...2524...>
Message-ID: <3-6813199134517018827-16924913522877771443-gambas=googlecode.com@...2524...>


Comment #3 on issue 438 by uAle... at ...626...: gb.xml.rpc sometimes doesn't  
parse data correctly due to incompleteness of received data
http://code.google.com/p/gambas/issues/detail?id=438

I checked it, and it should have worked in  
http://code.google.com/p/gambas/issues/detail?id=380

In the "miniserver.class"  
(http://code.google.com/p/gambas/issues/attachmentText?id=380&aid=3800010000&name=miniServer.class&token=ypSB0mNtf59I_36wVsoe1JavMpA%3A1370890134526),  
i added the following code:

     For cCount = 1 to 100 step 1
       cLen = Len(hBuffer[Bucle]) - InStr(hBuffer[Bucle], Chr(13) & Chr(10)  
& Chr(13) & Chr(10)) - 3
       If cLen = hLen[Bucle] Then Break
       Wait 0.01
     Next

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From bbruen at ...2308...  Tue Jun 11 06:51:04 2013
From: bbruen at ...2308... (Bruce)
Date: Tue, 11 Jun 2013 14:21:04 +0930
Subject: [Gambas-user] gnuplot ... any experienced users?
Message-ID: <1370926264.18738.12.camel@...2688...>

Rather than write a very lengthy post trying to describe a problem that
I am having with embedding a gnuplot plot in a gambas panel I am just
asking whether there are any people here that have some experience with
gnuplot that I can converse with offline.

(The problem is how to kill the gnuplot task when it is to be replaced
by a new plot.)

What the heck is all this about?

gnuplot is a fairly wonderful thing that can create some fantastic
plots.  Much more than is possible with the gambas gb.chart component.
I have written a gambas application that pulls some data from a db,
creates a gnuplot data file and a gnuplot script to generate a nice
little time series plot using splines, in addition the script embeds the
plot in a panel in my form automagically!  Specifically, the embedding
is done by gnuplot, not by gambas. I just send it the X11 handle of the
panel control.

It all works 99.9% wonderfully, I just can't figure out how to fix that
0.1% which is ... when I want to generate a new plot using some
different data how can I kill(?) the current gnuplot task that is
generating/reacting to it's plot in the panel.

Obscure? Yes.

Any takers? ... please.

Bruce




From rterry at ...1823...  Tue Jun 11 07:54:10 2013
From: rterry at ...1823... (richard terry)
Date: Tue, 11 Jun 2013 15:54:10 +1000
Subject: [Gambas-user] gnuplot ... any experienced users?
In-Reply-To: <1370926264.18738.12.camel@...2688...>
References: <1370926264.18738.12.camel@...2688...>
Message-ID: <51B6BB82.6060401@...1823...>

On 11/06/13 14:51, Bruce wrote:
> Rather than write a very lengthy post trying to describe a problem that
> I am having with embedding a gnuplot plot in a gambas panel I am just
> asking whether there are any people here that have some experience with
> gnuplot that I can converse with offline.
>
> (The problem is how to kill the gnuplot task when it is to be replaced
> by a new plot.)
>
> What the heck is all this about?
>
> gnuplot is a fairly wonderful thing that can create some fantastic
> plots.  Much more than is possible with the gambas gb.chart component.
> I have written a gambas application that pulls some data from a db,
> creates a gnuplot data file and a gnuplot script to generate a nice
> little time series plot using splines, in addition the script embeds the
> plot in a panel in my form automagically!  Specifically, the embedding
> is done by gnuplot, not by gambas. I just send it the X11 handle of the
> panel control.
>
> It all works 99.9% wonderfully, I just can't figure out how to fix that
> 0.1% which is ... when I want to generate a new plot using some
> different data how can I kill(?) the current gnuplot task that is
> generating/reacting to it's plot in the panel.
Not sure how you are doing this - would be interested in details.

I use this all day everyday generating graph after graph after graph for 
my patient clinical system.

  We took a simple method, pass the data to the engine  using a process 
and it returns a filepath of the graph which is then displayed in a 
picturebox


Works a charm, not sure if any of this is relevant to what you want.

richard
> Obscure? Yes.
>
> Any takers? ... please.
>
> Bruce
>
>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Windows:
>
> Build for Windows Store.
>
> http://p.sf.net/sfu/windows-dev2dev
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>
>




From taboege at ...626...  Tue Jun 11 10:06:09 2013
From: taboege at ...626... (Tobias Boege)
Date: Tue, 11 Jun 2013 10:06:09 +0200
Subject: [Gambas-user] gnuplot ... any experienced users?
In-Reply-To: <1370926264.18738.12.camel@...2688...>
References: <1370926264.18738.12.camel@...2688...>
Message-ID: <20130611080609.GA677@...2774...>

On Tue, 11 Jun 2013, Bruce wrote:
> Rather than write a very lengthy post trying to describe a problem that
> I am having with embedding a gnuplot plot in a gambas panel I am just
> asking whether there are any people here that have some experience with
> gnuplot that I can converse with offline.
> 
> (The problem is how to kill the gnuplot task when it is to be replaced
> by a new plot.)
> 
> What the heck is all this about?
> 
> gnuplot is a fairly wonderful thing that can create some fantastic
> plots.  Much more than is possible with the gambas gb.chart component.
> I have written a gambas application that pulls some data from a db,
> creates a gnuplot data file and a gnuplot script to generate a nice
> little time series plot using splines, in addition the script embeds the
> plot in a panel in my form automagically!  Specifically, the embedding
> is done by gnuplot, not by gambas. I just send it the X11 handle of the
> panel control.
> 
> It all works 99.9% wonderfully, I just can't figure out how to fix that
> 0.1% which is ... when I want to generate a new plot using some
> different data how can I kill(?) the current gnuplot task that is
> generating/reacting to it's plot in the panel.
> 
> Obscure? Yes.
> 
> Any takers? ... please.
> 

Hmm, we once had a gnuplot GUI online at [0] but it seems that it's being
reconstructed... Don't know if it supported what you asked for.

Anyway, I attached a program that lets you plot different functions on a
panel of your choice. Somewhere in this should be your solution, right?

- in case you want to switch the panel: re-"set terminal ..."
- in case you want to plot another function (or data file): re-"plot ..."

The difficult part IMHO is actually to find out how to redirect the plot to
an X11 handle :-)

Regards,
Tobi

[0] http://www.gambas-buch.de/dw/doku.php?id=k21:k21.3:k21.3.6:start
-------------- next part --------------
A non-text attachment was scrubbed...
Name: gplot-0.0.2.tar.gz
Type: application/octet-stream
Size: 5703 bytes
Desc: not available
URL: <http://lists.gambas-basic.org/pipermail/user/attachments/20130611/a56d5edf/attachment.obj>

From vuott at ...325...  Tue Jun 11 16:50:40 2013
From: vuott at ...325... (Ru Vuott)
Date: Tue, 11 Jun 2013 15:50:40 +0100 (BST)
Subject: [Gambas-user] function that finds that value for which an
	expression = 0
Message-ID: <1370962240.22476.YahooMailClassic@...3070...>

Hello,

an our friend of italian Gmabs forum asks me to send to this Mailing list a question:

**********************

I have an expression (example:+7*(x^3)+6*(x^2)-6*(x^1)+4*(x^0)) as expression (gb.eval) or string and I ask if you can find the value of x for which the expression = 0

**********************

Thanks
vuott



From taboege at ...626...  Tue Jun 11 18:06:07 2013
From: taboege at ...626... (Tobias Boege)
Date: Tue, 11 Jun 2013 18:06:07 +0200
Subject: [Gambas-user] function that finds that value for which an
 expression = 0
In-Reply-To: <1370962240.22476.YahooMailClassic@...3070...>
References: <1370962240.22476.YahooMailClassic@...3070...>
Message-ID: <20130611160607.GA1553@...2774...>

On Tue, 11 Jun 2013, Ru Vuott wrote:
> Hello,
> 
> an our friend of italian Gmabs forum asks me to send to this Mailing list a question:
> 
> **********************
> 
> I have an expression (example:+7*(x^3)+6*(x^2)-6*(x^1)+4*(x^0)) as expression (gb.eval) or string and I ask if you can find the value of x for which the expression = 0
> 
> **********************
> 

First of all: what is that for a kind of question? Of course can we find
that x! It's near x = -1.60999. Next time he should google the result or
let wolframalpha calculate it...

I really detest doing this but: maybe I should guess a little more about
what your question was meant to sound like... Do you want an algorithm to
compute/approximate the root of a polynomial in Gambas? How about the
bisection method? Sample project attached - which is far from ready to be
used. It hangs with something like x^2-10. Guess why! :-)

Regards,
Tobi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: root-0.0.1.tar.gz
Type: application/octet-stream
Size: 5007 bytes
Desc: not available
URL: <http://lists.gambas-basic.org/pipermail/user/attachments/20130611/6d4cb775/attachment.obj>

From vuott at ...325...  Tue Jun 11 18:27:44 2013
From: vuott at ...325... (Ru Vuott)
Date: Tue, 11 Jun 2013 17:27:44 +0100 (BST)
Subject: [Gambas-user] function that finds that value for which an
	expression = 0
In-Reply-To: <20130611160607.GA1553@...2774...>
Message-ID: <1370968064.29762.YahooMailClassic@...3070...>

Thank you, Tobi,

I have sent your answer to our friend.

bye
vuotttt





--- Mar 11/6/13, Tobias Boege <taboege at ...626...> ha scritto:

> Da: Tobias Boege <taboege at ...626...>
> Oggetto: Re: [Gambas-user] function that finds that value for which an expression = 0
> A: "mailing list for gambas users" <gambas-user at lists.sourceforge.net>
> Data: Marted? 11 giugno 2013, 18:06
> On Tue, 11 Jun 2013, Ru Vuott wrote:
> > Hello,
> > 
> > an our friend of italian Gmabs forum asks me to send to
> this Mailing list a question:
> > 
> > **********************
> > 
> > I have an expression
> (example:+7*(x^3)+6*(x^2)-6*(x^1)+4*(x^0)) as expression
> (gb.eval) or string and I ask if you can find the value of x
> for which the expression = 0
> > 
> > **********************
> > 
> 
> First of all: what is that for a kind of question? Of course
> can we find
> that x! It's near x = -1.60999. Next time he should google
> the result or
> let wolframalpha calculate it...
> 
> I really detest doing this but: maybe I should guess a
> little more about
> what your question was meant to sound like... Do you want an
> algorithm to
> compute/approximate the root of a polynomial in Gambas? How
> about the
> bisection method? Sample project attached - which is far
> from ready to be
> used. It hangs with something like x^2-10. Guess why! :-)
> 
> Regards,
> Tobi
> 
> -----Segue allegato-----
> 
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Windows:
> 
> Build for Windows Store.
> 
> http://p.sf.net/sfu/windows-dev2dev
> -----Segue allegato-----
> 
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>



From vuott at ...325...  Tue Jun 11 18:53:00 2013
From: vuott at ...325... (Ru Vuott)
Date: Tue, 11 Jun 2013 17:53:00 +0100 (BST)
Subject: [Gambas-user] function that finds ...  BIS
In-Reply-To: <20130611160607.GA1553@...2774...>
Message-ID: <1370969580.55034.YahooMailClassic@...3054...>

Hello Tobi,

our friend thanks you, however he said that he was referring to "Ruffini's rule".

http://en.wikipedia.org/wiki/Ruffini%27s_rule

bye
vuott





--- Mar 11/6/13, Tobias Boege <taboege at ...626...> ha scritto:

> Da: Tobias Boege <taboege at ...626...>
> Oggetto: Re: [Gambas-user] function that finds that value for which an expression = 0
> A: "mailing list for gambas users" <gambas-user at lists.sourceforge.net>
> Data: Marted? 11 giugno 2013, 18:06
> On Tue, 11 Jun 2013, Ru Vuott wrote:
> > Hello,
> > 
> > an our friend of italian Gmabs forum asks me to send to
> this Mailing list a question:
> > 
> > **********************
> > 
> > I have an expression
> (example:+7*(x^3)+6*(x^2)-6*(x^1)+4*(x^0)) as expression
> (gb.eval) or string and I ask if you can find the value of x
> for which the expression = 0
> > 
> > **********************
> > 
> 
> First of all: what is that for a kind of question? Of course
> can we find
> that x! It's near x = -1.60999. Next time he should google
> the result or
> let wolframalpha calculate it...
> 
> I really detest doing this but: maybe I should guess a
> little more about
> what your question was meant to sound like... Do you want an
> algorithm to
> compute/approximate the root of a polynomial in Gambas? How
> about the
> bisection method? Sample project attached - which is far
> from ready to be
> used. It hangs with something like x^2-10. Guess why! :-)
> 
> Regards,
> Tobi
> 
> -----Segue allegato-----
> 
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Windows:
> 
> Build for Windows Store.
> 
> http://p.sf.net/sfu/windows-dev2dev
> -----Segue allegato-----
> 
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>



From gambas at ...1...  Tue Jun 11 19:57:18 2013
From: gambas at ...1... (=?ISO-8859-1?Q?Beno=EEt_Minisini?=)
Date: Tue, 11 Jun 2013 19:57:18 +0200
Subject: [Gambas-user] function that finds ...  BIS
In-Reply-To: <1370969580.55034.YahooMailClassic@...3054...>
References: <1370969580.55034.YahooMailClassic@...3054...>
Message-ID: <51B764FE.8010002@...1...>

Le 11/06/2013 18:53, Ru Vuott a ?crit :
> Hello Tobi,
>
> our friend thanks you, however he said that he was referring to "Ruffini's rule".
>
> http://en.wikipedia.org/wiki/Ruffini%27s_rule
>
> bye
> vuott
>

In Gambas 3, you can use the gb.gsl component and its 'Polynomial' class 
for that.

For example, to solve '7*(x^3)+6*(x^2)-6*(x^1)+4*(x^0)':

   Dim hPoly As Polynomial
   Dim aSolve As Float[]
   Dim I As Integer

   hPoly = [4, -6, 6, 7]
   Print hPoly.ToString
   aSolve = hPoly.Solve()
   Print aSolve.Count;; "solution(s)"
   For I = 0 To aSolve.Max
     Print aSolve[I]
   Next

Regards,

-- 
Beno?t Minisini



From vuott at ...325...  Tue Jun 11 20:18:52 2013
From: vuott at ...325... (Ru Vuott)
Date: Tue, 11 Jun 2013 19:18:52 +0100 (BST)
Subject: [Gambas-user] function that finds ...  BIS
In-Reply-To: <51B764FE.8010002@...1...>
Message-ID: <1370974732.13938.YahooMailClassic@...3064...>

Thanks, Beno?t, I immediately report that to our friend.

Regards
vuott






--- Mar 11/6/13, Beno?t Minisini <gambas at ...1...> ha scritto:

> Da: Beno?t Minisini <gambas at ...1...>
> Oggetto: Re: [Gambas-user] function that finds ...  BIS
> A: "mailing list for gambas users" <gambas-user at lists.sourceforge.net>
> Data: Marted? 11 giugno 2013, 19:57
> Le 11/06/2013 18:53, Ru Vuott a
> ?crit :
> > Hello Tobi,
> >
> > our friend thanks you, however he said that he was
> referring to "Ruffini's rule".
> >
> > http://en.wikipedia.org/wiki/Ruffini%27s_rule
> >
> > bye
> > vuott
> >
> 
> In Gambas 3, you can use the gb.gsl component and its
> 'Polynomial' class 
> for that.
> 
> For example, to solve '7*(x^3)+6*(x^2)-6*(x^1)+4*(x^0)':
> 
> ???Dim hPoly As Polynomial
> ???Dim aSolve As Float[]
> ???Dim I As Integer
> 
> ???hPoly = [4, -6, 6, 7]
> ???Print hPoly.ToString
> ???aSolve = hPoly.Solve()
> ???Print aSolve.Count;; "solution(s)"
> ???For I = 0 To aSolve.Max
> ? ???Print aSolve[I]
> ???Next
> 
> Regards,
> 
> -- 
> Beno?t Minisini
> 
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Windows:
> 
> Build for Windows Store.
> 
> http://p.sf.net/sfu/windows-dev2dev
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>



From wally at ...2037...  Thu Jun 13 16:41:43 2013
From: wally at ...2037... (wally)
Date: Thu, 13 Jun 2013 16:41:43 +0200
Subject: [Gambas-user] error At revision 5700.
Message-ID: <2298532.8PRE9bTduV@...3040...>


At revision 5700.


jit_gambas_pass.cpp: In member function 'virtual bool 
{anonymous}::GambasPass::runOnFunction(llvm::Function&)':
jit_gambas_pass.cpp:62:23: error: invalid use of incomplete type 'class 
llvm::Function'
In file included from jit_gambas_pass.cpp:26:0:
/usr/include/llvm/Pass.h:37:7: error: forward declaration of 'class 
llvm::Function'
jit_gambas_pass.cpp:65:6: error: incomplete type 'llvm::Function' used in 
nested name specifier
jit_gambas_pass.cpp:65:25: error: expected ';' before 'BB'
jit_gambas_pass.cpp:65:54: error: 'BB' was not declared in this scope
jit_gambas_pass.cpp:65:60: error: 'E' was not declared in this scope
jit_gambas_pass.cpp:81:33: error: invalid use of incomplete type 'class 
llvm::Function'
In file included from jit_gambas_pass.cpp:26:0:
/usr/include/llvm/Pass.h:37:7: error: forward declaration of 'class 
llvm::Function'
jit_gambas_pass.cpp:84:27: error: invalid use of incomplete type 'class 
llvm::Function'
In file included from jit_gambas_pass.cpp:26:0:
/usr/include/llvm/Pass.h:37:7: error: forward declaration of 'class 
llvm::Function'
make[4]: *** [gb_jit_la-jit_gambas_pass.lo] Error 1






From lordheavym at ...626...  Thu Jun 13 17:01:33 2013
From: lordheavym at ...626... (Laurent Carlier)
Date: Thu, 13 Jun 2013 17:01:33 +0200
Subject: [Gambas-user] error At revision 5700.
In-Reply-To: <2298532.8PRE9bTduV@...3040...>
References: <2298532.8PRE9bTduV@...3040...>
Message-ID: <1990825.POgHtFpRmi@...2592...>

Le jeudi 13 juin 2013 16:41:43 wally a ?crit :
> At revision 5700.
> 
> 
> jit_gambas_pass.cpp: In member function 'virtual bool
> {anonymous}::GambasPass::runOnFunction(llvm::Function&)':
> jit_gambas_pass.cpp:62:23: error: invalid use of incomplete type 'class
> llvm::Function'
> In file included from jit_gambas_pass.cpp:26:0:
> /usr/include/llvm/Pass.h:37:7: error: forward declaration of 'class
> llvm::Function'
> jit_gambas_pass.cpp:65:6: error: incomplete type 'llvm::Function' used in
> nested name specifier
> jit_gambas_pass.cpp:65:25: error: expected ';' before 'BB'
> jit_gambas_pass.cpp:65:54: error: 'BB' was not declared in this scope
> jit_gambas_pass.cpp:65:60: error: 'E' was not declared in this scope
> jit_gambas_pass.cpp:81:33: error: invalid use of incomplete type 'class
> llvm::Function'
> In file included from jit_gambas_pass.cpp:26:0:
> /usr/include/llvm/Pass.h:37:7: error: forward declaration of 'class
> llvm::Function'
> jit_gambas_pass.cpp:84:27: error: invalid use of incomplete type 'class
> llvm::Function'
> In file included from jit_gambas_pass.cpp:26:0:
> /usr/include/llvm/Pass.h:37:7: error: forward declaration of 'class
> llvm::Function'
> make[4]: *** [gb_jit_la-jit_gambas_pass.lo] Error 1
> 

What is your llvm version ? (llvm-config --version)

-- 
Laurent Carlier
ArchLinux Developer
http://www.archlinux.org
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 490 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.gambas-basic.org/pipermail/user/attachments/20130613/c4aeaaad/attachment.sig>

From bbruen at ...2308...  Fri Jun 14 07:42:57 2013
From: bbruen at ...2308... (Bruce)
Date: Fri, 14 Jun 2013 15:12:57 +0930
Subject: [Gambas-user] Trouble compiling rev 5700
Message-ID: <1371188577.27091.3.camel@...2688...>

Fails at make stage with
        Making all in gbx
        make[4]: Entering directory `/home/bb/gb3source/main/gbx'
          CC       libgbx_a-gb_error.o
          CC       libgbx_a-gbx_exec_loop.o
          AR       libgbx.a
          CC       gb_la-gbx_c_class.lo
        ../libtool: line 2099: gbx_c_class.c: command not found
        gcc: error: : No such file or directory
        gcc: fatal error: no input files
        compilation terminated.
        make[4]: *** [gb_la-gbx_c_class.lo] Error 1
        make[4]: Leaving directory `/home/bb/gb3source/main/gbx'
        make[3]: *** [all-recursive] Error 1
        make[3]: Leaving directory `/home/bb/gb3source/main'
        make[2]: *** [all] Error 2
        make[2]: Leaving directory `/home/bb/gb3source/main'
        make[1]: *** [all-recursive] Error 1
        make[1]: Leaving directory `/home/bb/gb3source'
        make: *** [all] Error 2
        
[System]
OperatingSystem=Linux
Kernel=3.2.45-pclos8
Architecture=x86
Distribution=PCLinuxOS
Desktop=LXDE
Theme=QWindows
Language=en_AU.UTF-8
Memory=1518M

[Libraries]
Curl=libcurl.so.3.0.0
GStreamer=libgstreamer-0.10.so.0.29.0
GTK+=libgtk-x11-2.0.so.0.2400.10
Poppler=libpoppler.so.13.0.0
Qt4=libQtCore.so.4.8.4
SDL=libSDL-1.2.so.0.11.3

output.txt attached.

tia
Bruce
-------------- next part --------------
A non-text attachment was scrubbed...
Name: output.tar.gz
Type: application/x-compressed-tar
Size: 2333 bytes
Desc: not available
URL: <http://lists.gambas-basic.org/pipermail/user/attachments/20130614/a2b6c9ee/attachment.bin>

From introlinux at ...626...  Fri Jun 14 17:05:26 2013
From: introlinux at ...626... (=?ISO-8859-1?Q?Antonio_S=E1nchez?=)
Date: Fri, 14 Jun 2013 17:05:26 +0200
Subject: [Gambas-user] ShowPreview
Message-ID: <CABGO1xgR6vVBLEmOC=jLK5Za86ewqpWAVKy4J9-EGBNxodqmkA@...627...>

Hi! If you use the property the FileChooser control with the property
.ShowPreview (
http://gambasdoc.org/help/comp/gb.form/filechooser/showpreview?v3) and you
try read it inside _Icon() event, it doesn't return any value.

I attach a screenshot showing the stated of the FileChooser1 object and the
error in the property .ShowPreview:
"Unknown symbol 'GetPreview' in class 'FDirChooser", when you run.


S.O.: Linux Mint 12
cinnamon desktop
gambas version: 3.4.1
component: qb.form
-------------- next part --------------
A non-text attachment was scrubbed...
Name: FILECHOOSER_ERROR_ShowPreview.png
Type: image/png
Size: 237518 bytes
Desc: not available
URL: <http://lists.gambas-basic.org/pipermail/user/attachments/20130614/0da083dd/attachment.png>

From wally at ...2037...  Fri Jun 14 18:24:31 2013
From: wally at ...2037... (wally)
Date: Fri, 14 Jun 2013 18:24:31 +0200
Subject: [Gambas-user] error At revision 5700.
Message-ID: <1605694.ib7FNbDZse@...3040...>



>llvm-config --version
3.1

At revision 5700.


jit_gambas_pass.cpp: In member function 'virtual bool 
{anonymous}::GambasPass::runOnFunction(llvm::Function&)':
jit_gambas_pass.cpp:62:23: error: invalid use of incomplete type 'class 
llvm::Function'
In file included from jit_gambas_pass.cpp:26:0:
/usr/include/llvm/Pass.h:37:7: error: forward declaration of 'class 
llvm::Function'
jit_gambas_pass.cpp:65:6: error: incomplete type 'llvm::Function' used in 
nested name specifier
jit_gambas_pass.cpp:65:25: error: expected ';' before 'BB'
jit_gambas_pass.cpp:65:54: error: 'BB' was not declared in this scope
jit_gambas_pass.cpp:65:60: error: 'E' was not declared in this scope
jit_gambas_pass.cpp:81:33: error: invalid use of incomplete type 'class 
llvm::Function'
In file included from jit_gambas_pass.cpp:26:0:
/usr/include/llvm/Pass.h:37:7: error: forward declaration of 'class 
llvm::Function'
jit_gambas_pass.cpp:84:27: error: invalid use of incomplete type 'class 
llvm::Function'
In file included from jit_gambas_pass.cpp:26:0:
/usr/include/llvm/Pass.h:37:7: error: forward declaration of 'class 
llvm::Function'
make[4]: *** [gb_jit_la-jit_gambas_pass.lo] Error 1





From lordheavym at ...626...  Sat Jun 15 10:17:16 2013
From: lordheavym at ...626... (Laurent Carlier)
Date: Sat, 15 Jun 2013 10:17:16 +0200
Subject: [Gambas-user] error At revision 5700.
In-Reply-To: <1605694.ib7FNbDZse@...3040...>
References: <1605694.ib7FNbDZse@...3040...>
Message-ID: <CAE92JhoRVr7XWhZqzYCxdXQUsWGF-=4PmF76u7Wb3vGjH6UxRA@...627...>

2013/6/14 wally <wally at ...2037...>

>
>
> >llvm-config --version
> 3.1
>
> At revision 5700.
>
>
Please try with rev 5702


++


-- 

Laurent Carlier

ArchLinux Developer

http://www.archlinux.org


From jussi.lahtinen at ...626...  Sun Jun 16 22:19:23 2013
From: jussi.lahtinen at ...626... (Jussi Lahtinen)
Date: Sun, 16 Jun 2013 23:19:23 +0300
Subject: [Gambas-user] Crash with latest revision.
Message-ID: <CAFJMe7SASUNz-0y+t-vS2aojAJirw=UFfJZi_3Mr8Hoe9W3=wA@...627...>

Right now I don't know what caused this, but I'm investigating.
Crash occurs when I run my huge project. I redesigned part of the code, and
so this bug may also
be in earlier revisions of gbx3.

Program received signal SIGSEGV, Segmentation fault.
0x0000000000409b5d in VALUE_write (value=0x7ffff64e7720, addr=0x34, type=4)
    at gbx_value.c:939
939        *((int *)addr) = value->_integer.value;
(gdb) bt
#0  0x0000000000409b5d in VALUE_write (value=0x7ffff64e7720, addr=0x34,
type=4)
    at gbx_value.c:939
#1  0x000000000040adce in VALUE_class_write (class=0x7de588,
    value=0x7ffff64e7720, addr=0x34 <Address 0x34 out of bounds>, ctype=...)
    at gbx_value.c:1369
#2  0x000000000045fa9c in EXEC_loop () at gbx_exec_loop.c:1653
#3  0x0000000000410c4f in EXEC_function_loop () at gbx_exec.c:907
#4  0x0000000000410855 in EXEC_function_real () at gbx_exec.c:871
#5  0x0000000000413a28 in EXEC_public_desc (class=0x7cffe8, object=0x0,
    desc=0x99f118, nparam=0) at gbx_exec.c:1584
#6  0x0000000000444a64 in main (argc=1, argv=0x7fffffffdff8) at gbx.c:392

Gambas 3 rev 5705 @ Xubuntu 13.04 64 bit

Jussi


From gambas at ...2524...  Mon Jun 17 02:08:58 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Mon, 17 Jun 2013 00:08:58 +0000
Subject: [Gambas-user] Issue 439 in gambas: Crash with insane class.
Message-ID: <0-6813199134517018827-4794114954667667885-gambas=googlecode.com@...2524...>

Status: New
Owner: ----
Labels: Version Type-Crash Priority-Medium OpSys-Any Dist-Any Arch-Any  
Desktop-Any GUI-Any

New issue 439 by jussi.la... at ...626...: Crash with insane class.
http://code.google.com/p/gambas/issues/detail?id=439

1) Describe the problem.

Gambas crashes with buggy class.


2) GIVE THE FOLLOWING INFORMATIONS (if they are appropriate):

Version: TRUNK
Revision: r5705 (if you use a development version)
Operating system: Linux
Distribution: Xubuntu
Architecture: x86_64


3) Provide a little project that reproduces the bug or the crash.

Attached.


5) Explain clearly how to reproduce the bug or the crash.

Just run the project.


Back trace in case if it doesn't crash on your system.

Program received signal SIGSEGV, Segmentation fault.
0x0000000000409b5d in VALUE_write (value=0x7ffff64e70a0, addr=0x10, type=4)
     at gbx_value.c:939
939		*((int *)addr) = value->_integer.value;
(gdb) bt
#0  0x0000000000409b5d in VALUE_write (value=0x7ffff64e70a0, addr=0x10,  
type=4)
     at gbx_value.c:939
#1  0x000000000040adce in VALUE_class_write (class=0x83dc48,
     value=0x7ffff64e70a0, addr=0x10 <Address 0x10 out of bounds>, ctype=...)
     at gbx_value.c:1369
#2  0x000000000045fa9c in EXEC_loop () at gbx_exec_loop.c:1653
#3  0x0000000000410c4f in EXEC_function_loop () at gbx_exec.c:907
#4  0x0000000000410855 in EXEC_function_real () at gbx_exec.c:871
#5  0x0000000000413a28 in EXEC_public_desc (class=0x7529b8, object=0x83eed8,
     desc=0x83d728, nparam=0) at gbx_exec.c:1584
#6  0x0000000000436cdd in raise_event (observer=0x83eed8, object=0x8470c8,
     func_id=150, nparam=0) at gbx_api.c:812
#7  0x00000000004373c6 in GB_Raise (object=0x8470c8, event_id=17, nparam=0)
     at gbx_api.c:948
#8  0x00007ffff5e95604 in gb_raise_button_Click (sender=<optimized out>)
     at CButton.cpp:38



Attachments:
	BugHunting-0.0.2.tar.gz  4.9 KB

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From gambas at ...2524...  Mon Jun 17 02:13:29 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Mon, 17 Jun 2013 00:13:29 +0000
Subject: [Gambas-user] Issue 440 in gambas: Faulty error message from valid
	code
Message-ID: <0-6813199134517018827-14566035306270880607-gambas=googlecode.com@...2524...>

Status: New
Owner: ----
Labels: Version Type-Bug Priority-Medium OpSys-Any Dist-Any Arch-Any  
Desktop-Any GUI-Any

New issue 440 by jussi.la... at ...626...: Faulty error message from valid code
http://code.google.com/p/gambas/issues/detail?id=440

1) Describe the problem.

Invalid "Type mismatch" error.


2) GIVE THE FOLLOWING INFORMATIONS (if they are appropriate):

Version: TRUNK
Revision: r5705
Operating system: Linux
Distribution: Xubuntu
Architecture: x86_64


3) Provide a little project that reproduces the bug or the crash.

Attached.


5) Explain clearly how to reproduce the bug or the crash.

Just run the project.
Error message demands argument type Class1, while integer is valid argument.



-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From gambas at ...2524...  Mon Jun 17 02:15:30 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Mon, 17 Jun 2013 00:15:30 +0000
Subject: [Gambas-user] Issue 440 in gambas: Faulty error message from
	valid code
In-Reply-To: <0-6813199134517018827-14566035306270880607-gambas=googlecode.com@...2524...>
References: <0-6813199134517018827-14566035306270880607-gambas=googlecode.com@...2524...>
Message-ID: <1-6813199134517018827-14566035306270880607-gambas=googlecode.com@...2524...>


Comment #1 on issue 440 by jussi.la... at ...626...: Faulty error message from  
valid code
http://code.google.com/p/gambas/issues/detail?id=440

Attachment disappeared... new try.

Attachments:
	BugHunting-0.0.1.tar.gz  4.9 KB

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From shordi at ...626...  Mon Jun 17 11:37:11 2013
From: shordi at ...626... (=?ISO-8859-1?Q?Jorge_Carri=F3n?=)
Date: Mon, 17 Jun 2013 11:37:11 +0200
Subject: [Gambas-user] Fwd: About Client FTP
In-Reply-To: <CAOx-q9uJ0pRX3TPR=6W-vxuxb6uJ6swknkab--uQvD+5GQaUHA@...627...>
References: <CAOx-q9uJ0pRX3TPR=6W-vxuxb6uJ6swknkab--uQvD+5GQaUHA@...627...>
Message-ID: <CAOx-q9tXhVeE-QsOV_11Naf6-m8Z7aFoqiopOSpTKJN4kiEDBQ@...627...>

Fixed. It's my fault, not the FtpClient. Sorry for the noise...

Regards

---------- Forwarded message ----------
From: Jorge Carri?n <shordi at ...626...>
Date: 2013/6/6
Subject: About Client FTP
To: mailing list for gambas users <gambas-user at lists.sourceforge.net>


Using the ClientFtp control I have a behavior that I don't know if its a
bug o its somthing supposed to happen:

When I use the exec method, it works fine, but after all comands in exec
allways perform a

CWD name-of-folder who fails an generate an error.

Example:

Exec(["CWD /personales/jorge", "rnfr gabinete.cfg", "rnto gaginsete.cfg"])

generates the following output in the console of Gambas:

* About to connect() to the-ip-server port 21 (#0)
*   Trying the-ipserver... * connected
< 220 (vsFTPd 2.3.5)
> USER gabinete
< 331 Please specify the password.
> PASS thesecrectpassword
< 230 Login successful.
> PWD
< 257 "/"
* Entry path is '/'
> CWD /personales/jorge/
< 250 Directory successfully changed.
> rnfr gabinete.cfg
< 350 Ready for RNTO.
> rnto gabinsete.cfg
< 250 Rename successful.
> CWD personales          <<<<-------This is the command who comes from
nowhere!!!
< 550 Failed to change directory.
* Server denied you to change to the given directory
* Connection #0 to host 84.127.229.244 left intact
* Access denied to remote resource
> QUIT
< 221 Goodbye.
* Closing connection #0

This makes very difficult to test if the operation has been successfull or
failed.
?How can I prevent this behavior of FtpClient?

Regards


From willy at ...2734...  Tue Jun 18 03:10:13 2013
From: willy at ...2734... (Willy Raets)
Date: Tue, 18 Jun 2013 03:10:13 +0200
Subject: [Gambas-user] Opening project in IDE results in CComponent.Load.583
Message-ID: <1371517813.5369.8.camel@...3024...>


Hi,

When opening one of my projects in IDE this results in:
CComponent.Load.583
Void key
(see attached .png)

The project is a library and when opening a project that depends on the
library in IDE same message occurs.

Problem appeared after some translation inconsistency when using the
translator tool. I already skimmed all .po files for a solution but
nothing I tried seemed to work.

Any suggestions as where to look for what is going on as the message
makes little sense to be? Maybe it does to someone out here.

Linux Mint 12.04 - Mate 1.4 - Gambas 3.4.1 from PPA Kendek

Also run it on: Debian 6.0.7 - Gnome 2.30 - Gambas 3.4.1
Same occurs there. It seems to be in the project itself not in Gambas


-- 
Kind regards,

Willy (aka gbWilly)

http://gambasshowcase.org/
http://howtogambas.org
http://gambos.org



-------------- next part --------------
A non-text attachment was scrubbed...
Name: 02.png
Type: image/png
Size: 14439 bytes
Desc: not available
URL: <http://lists.gambas-basic.org/pipermail/user/attachments/20130618/41ff57fb/attachment.png>

From gambas at ...1...  Tue Jun 18 03:35:02 2013
From: gambas at ...1... (=?ISO-8859-1?Q?Beno=EEt_Minisini?=)
Date: Tue, 18 Jun 2013 03:35:02 +0200
Subject: [Gambas-user] Opening project in IDE results in
	CComponent.Load.583
In-Reply-To: <1371517813.5369.8.camel@...3024...>
References: <1371517813.5369.8.camel@...3024...>
Message-ID: <51BFB946.1020009@...1...>

Le 18/06/2013 03:10, Willy Raets a ?crit :
>
> Hi,
>
> When opening one of my projects in IDE this results in:
> CComponent.Load.583
> Void key
> (see attached .png)
>
> The project is a library and when opening a project that depends on the
> library in IDE same message occurs.
>
> Problem appeared after some translation inconsistency when using the
> translator tool. I already skimmed all .po files for a solution but
> nothing I tried seemed to work.
>
> Any suggestions as where to look for what is going on as the message
> makes little sense to be? Maybe it does to someone out here.
>
> Linux Mint 12.04 - Mate 1.4 - Gambas 3.4.1 from PPA Kendek
>
> Also run it on: Debian 6.0.7 - Gnome 2.30 - Gambas 3.4.1
> Same occurs there. It seems to be in the project itself not in Gambas
>

Please provide the project so that I can fix the bug.

Regards,

-- 
Beno?t Minisini



From gambas at ...2524...  Tue Jun 18 07:41:17 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Tue, 18 Jun 2013 05:41:17 +0000
Subject: [Gambas-user] Issue 441 in gambas: Caling Report print not working
 when report takes some arguments
Message-ID: <0-6813199134517018827-7823826815829786450-gambas=googlecode.com@...2524...>

Status: New
Owner: ----
Labels: 3.4.1 Type-Bug Priority-Medium OpSys-Any Dist-Any Arch-Any  
Desktop-Any GUI-Any

New issue 441 by isaf... at ...626...: Caling Report print not working when  
report takes some arguments
http://code.google.com/p/gambas/issues/detail?id=441

1) when report takes some arguments (e.g. Public Sub _new(txtname As  
String) ) then preview is working but print is not working. However when  
report doesn't take any extra argument then both preview and print works

2) GIVE THE FOLLOWING INFORMATIONS (if they are appropriate):

Version: 3.4.1 (using PPA)
Revision: r1234 (if you use a development version)
Operating system: Linux
Distribution: Ubuntu 12.04
Architecture: x86
GUI component:  QT4 / GTK+
Desktop used: Gnome

3) Provide a little project that reproduces the bug or the crash.
I have a report "Report1" with a label and a form with textbox and button.  
The label in report gets data from textbox on form when called for printing  
the report. In report:
Public Sub _new(txtname As String)
   ReportLabel1.Text = txtname
End

In form:
Private hReport As Report
Public Sub Button1_Click()
hReport = New Report1(TextBox1.Text)
hReport.Print
End

The error comes "No enough arguments". However it works when
hReport.Preview
I searched but couldn't find suitable answer in any fourm.

4) If your project needs a database, try to provide it, or part of it.
No

5) Explain clearly how to reproduce the bug or the crash.
as above


Attachments:
	report.zip  7.8 KB

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From willy at ...2734...  Tue Jun 18 16:52:30 2013
From: willy at ...2734... (Willy Raets)
Date: Tue, 18 Jun 2013 16:52:30 +0200
Subject: [Gambas-user] Possible bug in gb.gtk combined with DrawArea
Message-ID: <1371567150.3154.4.camel@...3024...>

Hi all,

I made a little project to explain the problem.
In the project you will find an About form in Help menu.
This About form takes a RichText file and scrolls it from bottom to top
in a DrawArea on the About form.

When using gb.qt4 component things look as I expect them to look.
The text is centred on the DrawArea as is my intention.

When using gb.gtk component same About form shows the text differently.
It is no longer centred.

To me this seems to be a bug in gb.gtk

Project attached (gb.qt4 is default component to see what I would like) 

Using Gambas 3.4.1 from PPA Kendek

-- 
Kind regards,

Willy (aka gbWilly)

http://gambasshowcase.org/
http://howtogambas.org
http://gambos.org



-------------- next part --------------
A non-text attachment was scrubbed...
Name: DrawBug-0.0.tar.gz
Type: application/x-compressed-tar
Size: 111792 bytes
Desc: not available
URL: <http://lists.gambas-basic.org/pipermail/user/attachments/20130618/c3ec78ef/attachment.bin>

From gambas at ...1...  Wed Jun 19 04:02:35 2013
From: gambas at ...1... (=?ISO-8859-1?Q?Beno=EEt_Minisini?=)
Date: Wed, 19 Jun 2013 04:02:35 +0200
Subject: [Gambas-user] Opening project in IDE results in
	CComponent.Load.583
In-Reply-To: <51BFB946.1020009@...1...>
References: <1371517813.5369.8.camel@...3024...>
	<51BFB946.1020009@...1...>
Message-ID: <51C1113B.8010103@...1...>

Le 18/06/2013 03:35, Beno?t Minisini a ?crit :
> Le 18/06/2013 03:10, Willy Raets a ?crit :
>>
>> Hi,
>>
>> When opening one of my projects in IDE this results in:
>> CComponent.Load.583
>> Void key
>> (see attached .png)
>>
>> The project is a library and when opening a project that depends on the
>> library in IDE same message occurs.
>>
>> Problem appeared after some translation inconsistency when using the
>> translator tool. I already skimmed all .po files for a solution but
>> nothing I tried seemed to work.
>>
>> Any suggestions as where to look for what is going on as the message
>> makes little sense to be? Maybe it does to someone out here.
>>
>> Linux Mint 12.04 - Mate 1.4 - Gambas 3.4.1 from PPA Kendek
>>
>> Also run it on: Debian 6.0.7 - Gnome 2.30 - Gambas 3.4.1
>> Same occurs there. It seems to be in the project itself not in Gambas
>>
>
> Please provide the project so that I can fix the bug.
>
> Regards,
>

It was a bug in the compiler that didn't handle newlines in exported 
public constants correctly.

It is fixed in revision #5706, but you have to recompile your project 
entirely.

Regards,

-- 
Beno?t Minisini



From gambas at ...2524...  Wed Jun 19 04:48:52 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Wed, 19 Jun 2013 02:48:52 +0000
Subject: [Gambas-user] Issue 439 in gambas: Crash with insane class.
In-Reply-To: <0-6813199134517018827-4794114954667667885-gambas=googlecode.com@...2524...>
References: <0-6813199134517018827-4794114954667667885-gambas=googlecode.com@...2524...>
Message-ID: <1-6813199134517018827-4794114954667667885-gambas=googlecode.com@...2524...>

Updates:
	Status: Accepted
	Labels: -Version Version-3.4.0

Comment #1 on issue 439 by benoit.m... at ...626...: Crash with insane class.
http://code.google.com/p/gambas/issues/detail?id=439

(No comment was entered for this change.)

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From gambas at ...2524...  Wed Jun 19 04:49:52 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Wed, 19 Jun 2013 02:49:52 +0000
Subject: [Gambas-user] Issue 439 in gambas: Crash with insane class.
In-Reply-To: <1-6813199134517018827-4794114954667667885-gambas=googlecode.com@...2524...>
References: <1-6813199134517018827-4794114954667667885-gambas=googlecode.com@...2524...>
	<0-6813199134517018827-4794114954667667885-gambas=googlecode.com@...2524...>
Message-ID: <2-6813199134517018827-4794114954667667885-gambas=googlecode.com@...2524...>

Updates:
	Status: Fixed

Comment #2 on issue 439 by benoit.m... at ...626...: Crash with insane class.
http://code.google.com/p/gambas/issues/detail?id=439

Fixed in revision #5707.

An error is raised now instead of crashing.

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From Karl.Reinl at ...2345...  Thu Jun 20 13:29:13 2013
From: Karl.Reinl at ...2345... (Charlie Reinl)
Date: Thu, 20 Jun 2013 13:29:13 +0200
Subject: [Gambas-user] Question about XML
Message-ID: <1371727753.2378.31.camel@...40...>

Salut Adrien,

"Article :\ngreen peppers\ntinned tomatoes"

this text saved with 

xml.Attribute("Text", "Article :\ngreen peppers\ntinned tomatoes") 
where xml is a XmlWriter

the old XMLLib sorted thet

Text="Article :&#10;green peppers&#10;tinned tomatoes"

the new XMLLib saves it like 
Text="Article :
green peppers
tinned tomatoes"

Now my question: is it a bug, or was it a bug.
Just to know who makes the changes, you for all, or me in my project.

Thanks anyway 


-- 
Amicalement
Charlie




From gambas at ...2524...  Thu Jun 20 16:50:52 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Thu, 20 Jun 2013 14:50:52 +0000
Subject: [Gambas-user] Issue 442 in gambas: SQL connection.Edit bug
Message-ID: <0-6813199134517018827-9979940376369222840-gambas=googlecode.com@...2524...>

Status: New
Owner: ----
Labels: Type-Bug Priority-High OpSys-Any Dist-Any Arch-Any Desktop-Any  
GUI-Any

New issue 442 by BugCatch... at ...626...: SQL connection.Edit bug
http://code.google.com/p/gambas/issues/detail?id=442

1) Describe the problem.
Trying to delete a record in a Sqlite DB, so I used the "$hConn.Edit"  
function. I got the following error:

sqlite3: 0x139aa50: BEGIN
sqlite3: 0x139aa50: SELECT * FROM 'SELECT * FROM Topics where TopicId = 154'
sqlite3: 0x139aa50: ROLLBACK
QSpiAccessible::accessibleEvent not handled:  "2"  obj:   
QMessageBox(0x1557160) ""
FIXME: handle dialog start.
Query failed: SQL error or missing database
FIXME: handle dialog end.


I confirmed that the "Exec" command works fine, but that the "Edit" command  
duplicates part of the command when sending the SQL to the DB.

rsTopics = FMain.$hConn.Exec("SELECT * FROM Topics where TopicId = 154")
sqlite3: 0x1566df0: BEGIN
sqlite3: 0x1566df0: SELECT * FROM Topics where TopicId = 154


rsTopics = FMain.$hConn.Edit("SELECT * FROM Topics where TopicId = 154")
sqlite3: 0x150deb0: BEGIN
sqlite3: 0x150deb0: SELECT * FROM 'SELECT * FROM Topics where TopicId = 154'


2) GIVE THE FOLLOWING INFORMATIONS (if they are appropriate):
gambas3-ide 3.4.1-1raring2

[System]
OperatingSystem=Linux
Kernel=3.8.0-25-generic
Architecture=x86_64
Distribution=Ubuntu 13.04
Desktop=GNOME

GUI component: QT4 / GTK+


3) Provide a little project that reproduces the bug or the crash.
Public $hConn As New Connection
Private sAppPath As String
Dim rsTopics As Result

sAppPath = Str$(Application.Path)

sName = "churchlibrary.sqlite"

With $hConn
     .Type = "sqlite3"
     .Host = sAppPath          ' path to DB location which is the  
application.path
     .Login = "Librarian"      'Technically not needed, just for me
     .Password = "Righteous"   'Technically not needed, just for me
     .Name = sName
     .Port = ""                ' See note above ^
End With


$hConn.Open
$hConn.Begin

rsTopics = $hConn.Edit("SELECT * FROM Topics where TopicId = 154")


4) If your project needs a database, try to provide it, or part of it.
See attachment

5) Explain clearly how to reproduce the bug or the crash.
Run SQL command

6) By doing that carefully, you have done 50% of the bug fix job!

IMPORTANT NOTE: if you encounter several different problems or bugs, (for
example, a bug in your project, and an interpreter crash while debugging
it), please create distinct issues!


Attachments:
	churchlibrary.sqlite  107 KB

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From gambas at ...2524...  Thu Jun 20 23:13:41 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Thu, 20 Jun 2013 21:13:41 +0000
Subject: [Gambas-user] Issue 443 in gambas: Array size limit???
Message-ID: <0-6813199134517018827-2784767708109103475-gambas=googlecode.com@...2524...>

Status: New
Owner: ----
Labels: Version Type-Bug Priority-Medium OpSys-Any Dist-Any Arch-Any  
Desktop-Any GUI-Any

New issue 443 by BugCatch... at ...626...: Array size limit???
http://code.google.com/p/gambas/issues/detail?id=443

1) Describe the problem.
Trying to create an array with these values:

Dim arrItemId As Integer[] = [300, 301, 302, 303, 304, 305, 306, 307, 308,  
309, 310, 311, 312, 313, 314, 315, 316, 317, 318, 319, 320, 321, 322, 323,  
324, 325, 326, 32043, 32506, 34594, 35666, 35683, 35684, 50023, 52047,  
52126, 53026, 53451, 53556, 53911, 54100, 62012, 62042, 62044, 62045,  
62047, 62050, 62051, 62238, 62298, 62332, 62370, 62380, 62462, 62467,  
62478, 62492, 62503, 62517, 62520, 62535, 62565, 62604, 62620, 62630]

Get error saying: "Too many arguments"

Isolated the magic number down to 63 arguments. I have 65. I did not find  
anything in the documentation about a limit on array sizes. Did I miss  
something, or is this an artifact from earlier times?

2) GIVE THE FOLLOWING INFORMATIONS (if they are appropriate):
gambas3-ide 3.4.1-1raring2

[System]
OperatingSystem=Linux
Kernel=3.8.0-25-generic
Architecture=x86_64
Distribution=Ubuntu 13.04
Desktop=GNOME

GUI component: QT4 / GTK+

3) Provide a little project that reproduces the bug or the crash.
See "Dim arrItemId As Integer[] " declaration above.

4) If your project needs a database, try to provide it, or part of it.
N/A

5) Explain clearly how to reproduce the bug or the crash.
Try to declare this array as written

6) By doing that carefully, you have done 50% of the bug fix job!

IMPORTANT NOTE: if you encounter several different problems or bugs, (for
example, a bug in your project, and an interpreter crash while debugging
it), please create distinct issues!


-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From gambas at ...2524...  Thu Jun 20 23:33:57 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Thu, 20 Jun 2013 21:33:57 +0000
Subject: [Gambas-user] Issue 442 in gambas: SQL connection.Edit bug
In-Reply-To: <0-6813199134517018827-9979940376369222840-gambas=googlecode.com@...2524...>
References: <0-6813199134517018827-9979940376369222840-gambas=googlecode.com@...2524...>
Message-ID: <1-6813199134517018827-9979940376369222840-gambas=googlecode.com@...2524...>

Updates:
	Status: WontFix

Comment #1 on issue 442 by benoit.m... at ...626...: SQL connection.Edit bug
http://code.google.com/p/gambas/issues/detail?id=442

The Edit() method does not work that way.

The syntax is Edit(<table>, <where request>)

The first argument must be the name of the table.
The second argument is the "where" part without the where keyword. It  
handles argument substitution.

Please read the documentation of the Edit() method.

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From gambas at ...2524...  Thu Jun 20 23:37:18 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Thu, 20 Jun 2013 21:37:18 +0000
Subject: [Gambas-user] Issue 443 in gambas: Array size limit???
In-Reply-To: <0-6813199134517018827-2784767708109103475-gambas=googlecode.com@...2524...>
References: <0-6813199134517018827-2784767708109103475-gambas=googlecode.com@...2524...>
Message-ID: <1-6813199134517018827-2784767708109103475-gambas=googlecode.com@...2524...>

Updates:
	Status: WontFix
	Labels: -Version Version-TRUNK

Comment #1 on issue 443 by benoit.m... at ...626...: Array size limit???
http://code.google.com/p/gambas/issues/detail?id=443

The Gambas array initialization is done at runtime. I.e., [...] is an  
operator, and cannot take more than 63 arguments (this is a Gambas limit).

You can use that ugly trick to workaround the limitation:

Dim arr As Integer[] = [1, 2, ..., 63].Insert([64, 65, ... ]).Insert([127,  
128, ...])

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From gambas at ...1...  Thu Jun 20 23:43:49 2013
From: gambas at ...1... (=?ISO-8859-1?Q?Beno=EEt_Minisini?=)
Date: Thu, 20 Jun 2013 23:43:49 +0200
Subject: [Gambas-user] Gambas2.7 on puppy linux: how to change
 TargetPort on UDP ?
In-Reply-To: <1370884419191-42218.post@...3046...>
References: <1370884419191-42218.post@...3046...>
Message-ID: <51C37795.9040802@...1...>

Le 10/06/2013 19:13, robotop a ?crit :
> Hello, I'm using Gambas2 for a very basic DNS server with limited features.
> There are no problems receiving packets on port 53 via UDP socket. The
> request is parsed and the answer is formed correctly and printed to a
> message window, then the UDP TargetHost is set with the contents of
> SourceHost and the TargetPort is set to 53; the problem is that the answer
> UDP packet is sent on a different port (typ. 1031..1044). It seems that the
> assignment UdpDnss.TargetPort = 53 is ignored; a confirmation is that if I
> read back the value of UdpDnss.TargetPort, the value read is different from
> 53 and, again, typically in the range 1031..1044). How can I change that
> port ? Is there a way to change the data directly accessing the memory
> buffer where the stream is stored ? How to simulate the varptr function that
> isn't present on gambas2 ? I can't upgrade my system to Gambas3, 'cause of
> lack of resources on my HW (miniITX board with CF disk) and no package
> available for Puppy Linux newer than 2.7 ; thank you in advance. I'll wait
> for your suggestions...
>

If I remember, this was a bug fixed in a later version. I think you have 
to upgrade your Gambas 2 version to the latest one available.

Regards,

-- 
Beno?t Minisini



From eficara at ...626...  Fri Jun 21 20:40:31 2013
From: eficara at ...626... (robotop)
Date: Fri, 21 Jun 2013 11:40:31 -0700 (PDT)
Subject: [Gambas-user] Gambas2.7 on puppy linux: how to change
	TargetPort on UDP ?
In-Reply-To: <51C37795.9040802@...1...>
References: <1370884419191-42218.post@...3046...>
	<51C37795.9040802@...1...>
Message-ID: <51C49E0A.40205@...626...>

Thank you, Mr Minisini. I will check for a more recent compiled package 
of Gambas for Puppy Linux. :)





--
View this message in context: http://gambas.8142.n7.nabble.com/Gambas2-7-on-puppy-linux-how-to-change-TargetPort-on-UDP-tp42218p42258.html
Sent from the gambas-user mailing list archive at Nabble.com.


From paulwheeler at ...546...  Sat Jun 22 02:08:48 2013
From: paulwheeler at ...546... (paulwheeler)
Date: Fri, 21 Jun 2013 17:08:48 -0700
Subject: [Gambas-user] Issue 442 in gambas: SQL connection.Edit bug
In-Reply-To: <qlaU1l00m1uq7CQ01laVlh>
References: <0-6813199134517018827-9979940376369222840-gambas=googlecode.com@...2524...>
	<qlaU1l00m1uq7CQ01laVlh>
Message-ID: <51C4EB10.6050608@...546...>

Beno?t

Thank you for your reply, and thank you for your patience in dealing 
with people like me who are not full-time programmers.

Thank you for taking the time to help me understand.

Paul



As for your last line about reading the documentation. I DID read it. 
However, I was confused by these lines:
' Same as Select * from tblDEFAULT where id = [parameter value]
sCriteria = "id = &1"
iParameter = 1012

It was not clear to me how "iParameter" fit into the select statement 
above it, since it was not in the statement. It was also not obvious to 
me that you leave out the "where".

I usually associate "Request" with the fact that you are doing a "where" 
statement, so leaving it out did not occur to me. I know you mention 
that in this line of the code: "The second argument is the "where" part 
without the where keyword," but again, it did not click. Maybe it was 
the drugs from the knee replacement surgery a week ago, or the fact that 
I am trying to remember things I did for only a year 6 years ago. Either 
way, please accept the fact that I am trying and that I do actually read 
the instructions.


Now that I know what you were trying to say, may I suggest this 
alternate wording for the definition (feel free to use any, all or none 
of it):


Connection.Edit (gb.db)
Function Edit ( Table As String [ , Request As String, Arguments As , 
... ] ) As Result
Returns a read/write Result object used for editing records in the 
specified table.

This fill-in-the-blank function is the same as the following SQL 
statement, but with a twist:
"Select * from tblDEFAULT where id = [Value or Variable Name]"

The syntax is Edit(<table>, <request>, <optional argument>)

Table (tblDEFAULT) is the only required input. Request and Arguments are 
optional.

Request is the selection criteria (id = [Value or Variable Name]) part 
of a "WHERE" clause used for filtering the table. However, the "WHERE" 
keyword is omitted from the statement. So, our sql would now look like this:
"Select * from tblDEFAULT id = [Variable Name]"

The third value may seem strange, but allows you to write requests that 
are independant of the underlying database type. The arguments are 
quoted as needed by the SQL syntax, and substituted inside the Request 
string.

So, visually we now have a statement that may look like this:
"Select * from tblDEFAULT id = [Variable Name = iArgument]"

To actually plug in the values you would need these definitions:
sCriteria = "id = &1"    AND    iArgument = 1012

Finally your statement looks like this:
hResult = $hConn.Edit("tblDEFAULT", sCriteria, iArgument)



I also made minor changes to your sample code to reflect the above 
explanation:

Example
DIM hResult AS Result
DIM sCriteria AS String
DIM iArgument AS Integer

' Same as "Select * from tblDEFAULT where id = [Variable Name = iArgument]"
sCriteria = "id = &1"
iArgument = 1012

$hConn.Begin

hResult = $hConn.Edit("tblDEFAULT", sCriteria, iArgument)
' Set field value
hResult!Name = "Mr Smith"

' Update the value
hResult.Update
$hConn.Commit


On 06/20/2013 02:33 PM, gambas at ...2524... wrote:
> Updates:
> 	Status: WontFix
>
> Comment #1 on issue 442 by benoit.m... at ...626...: SQL connection.Edit bug
> http://code.google.com/p/gambas/issues/detail?id=442
>
> The Edit() method does not work that way.
>
> The syntax is Edit(<table>, <where request>)
>
> The first argument must be the name of the table.
> The second argument is the "where" part without the where keyword. It
> handles argument substitution.
>
> Please read the documentation of the Edit() method.
>




From vuott at ...325...  Sat Jun 22 17:47:22 2013
From: vuott at ...325... (Ru Vuott)
Date: Sat, 22 Jun 2013 16:47:22 +0100 (BST)
Subject: [Gambas-user] Possible bug in GridView .Font property
Message-ID: <1371916042.14731.YahooMailBasic@...3070...>

Hello,

I would like to bring to your attention this code:

Public Sub Form_Open()  
  
 With GridView1  
   .Columns.Count = 2  
   .Rows.Count = 2  
   .Columns. W = GridView1.W * 0.5  
 End With  
  
  
'  1st case:  
 With GridView1[0, 0]  
   .Font.Size = 20  
   .Font.Bold = True  
   .Text = "Aliquid textum"  
 End With  
  
'  2nd case:  
 With GridView1[0, 1]  
   .RichText = "<B>"  
   .Font.Size = 20  
   .Font.Bold = True  
   .Text = "Aliquid textum"  
 End With  
  
End
*************************

Well,
about 1st case:
- because, while placing the property .Bold = True, the text in the first case does not appear  "bold" ?
- because, even if you set a value for the property .Font.Size , the characters do not change their size?

about 2nd case:
why, everything that I wanted to get in the first case, I get it strangely in the second case.... but only if I place *also* the property. RichText = "<B>" ???

Is it a bug ?

Regards
vuott



From gambas at ...1...  Sat Jun 22 18:26:44 2013
From: gambas at ...1... (=?ISO-8859-1?Q?Beno=EEt_Minisini?=)
Date: Sat, 22 Jun 2013 18:26:44 +0200
Subject: [Gambas-user] Possible bug in gb.gtk combined with DrawArea
In-Reply-To: <1371567150.3154.4.camel@...3024...>
References: <1371567150.3154.4.camel@...3024...>
Message-ID: <51C5D044.9050305@...1...>

Le 18/06/2013 16:52, Willy Raets a ?crit :
> Hi all,
>
> I made a little project to explain the problem.
> In the project you will find an About form in Help menu.
> This About form takes a RichText file and scrolls it from bottom to top
> in a DrawArea on the About form.
>
> When using gb.qt4 component things look as I expect them to look.
> The text is centred on the DrawArea as is my intention.
>
> When using gb.gtk component same About form shows the text differently.
> It is no longer centred.
>
> To me this seems to be a bug in gb.gtk
>
> Project attached (gb.qt4 is default component to see what I would like)
>
> Using Gambas 3.4.1 from PPA Kendek
>

It should be fixed in revision #5708.

Regards,

-- 
Beno?t Minisini



From gambas at ...2524...  Sun Jun 23 20:05:15 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Sun, 23 Jun 2013 18:05:15 +0000
Subject: [Gambas-user] Issue 444 in gambas: Balloon location is wrong for a
	textbox
Message-ID: <0-6813199134517018827-4662149372359897761-gambas=googlecode.com@...2524...>

Status: New
Owner: ----
Labels: Version Type-Bug Priority-Medium OpSys-Any Dist-Any Arch-Any  
Desktop-Any GUI-Any

New issue 444 by uAle... at ...626...: Balloon location is wrong for a textbox
http://code.google.com/p/gambas/issues/detail?id=444

1) Describe the problem.

The Balloon is on the wrong location - it doesn't have the "arrow" inside  
the textbox, but it is outside the textbox (the balloon is misalligned).

2) GIVE THE FOLLOWING INFORMATIONS (if they are appropriate):

Version: TRUNK
Revision: r5708 (if you use a development version)
Operating system: Linux
Distribution: Ubuntu 12.04 & 13.04
Architecture: x86_64
GUI component: QT4
Desktop used: Ubuntu One and Gnome

3) Provide a little project that reproduces the bug or the crash.
Attached is the "TestBalloon.tar" and the screenshot showing that the  
balloon is at the wrong location.

4) If your project needs a database, try to provide it, or part of it.

5) Explain clearly how to reproduce the bug or the crash.
Start the little project on Ubuntu 13.04 & QT4 and you will see that the  
balloon is at the wrong location.

6) By doing that carefully, you have done 50% of the bug fix job!

IMPORTANT NOTE: if you encounter several different problems or bugs, (for
example, a bug in your project, and an interpreter crash while debugging
it), please create distinct issues!

Attachments:
	balloon-wrong.png  11.0 KB
	TestBalloon.tar  20.0 KB

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From willy at ...2734...  Mon Jun 24 15:54:33 2013
From: willy at ...2734... (Willy Raets)
Date: Mon, 24 Jun 2013 15:54:33 +0200
Subject: [Gambas-user] Possible bug in gb.gtk combined with DrawArea
In-Reply-To: <51C5D044.9050305@...1...>
References: <1371567150.3154.4.camel@...3024...>
	<51C5D044.9050305@...1...>
Message-ID: <1372082073.3012.0.camel@...3024...>

On Sat, 2013-06-22 at 18:26 +0200, Beno?t Minisini wrote:
> Le 18/06/2013 16:52, Willy Raets a ?crit :
> > Hi all,
> >
> > I made a little project to explain the problem.
> > In the project you will find an About form in Help menu.
> > This About form takes a RichText file and scrolls it from bottom to top
> > in a DrawArea on the About form.
> >
> > When using gb.qt4 component things look as I expect them to look.
> > The text is centred on the DrawArea as is my intention.
> >
> > When using gb.gtk component same About form shows the text differently.
> > It is no longer centred.
> >
> > To me this seems to be a bug in gb.gtk
> >
> > Project attached (gb.qt4 is default component to see what I would like)
> >
> > Using Gambas 3.4.1 from PPA Kendek
> >
> 
> It should be fixed in revision #5708.

I can confirm it is fixed.


-- 
Kind regards,

Willy (aka gbWilly)

http://gambasshowcase.org/
http://howtogambas.org
http://gambos.org







From gambas at ...2524...  Mon Jun 24 22:07:24 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Mon, 24 Jun 2013 20:07:24 +0000
Subject: [Gambas-user] Issue 445 in gambas: Project profiling setting not
	saved
Message-ID: <0-6813199134517018827-2981516577960554164-gambas=googlecode.com@...2524...>

Status: New
Owner: ----
Labels: Version Type-Bug Priority-Medium OpSys-Any Dist-Any Arch-Any  
Desktop-Any GUI-Any

New issue 445 by r... at ...1740...: Project profiling setting not saved
http://code.google.com/p/gambas/issues/detail?id=445

1) Describe the problem.

When changing profiling settings of project it doesn't get saved.

2) GIVE THE FOLLOWING INFORMATIONS (if they are appropriate):

Version: TRUNK
Revision: r5708
[System]
OperatingSystem=Linux
Kernel=3.10.0-rc1pixel+
Architecture=x86_64
Distribution=Ubuntu 12.04.2 LTS
Desktop=GNOME
Theme=QGtk
Language=en_US.UTF-8
Memory=3901M

[Libraries]
Curl=libcurl.so.4.2.0
GStreamer=libgstreamer-0.10.so.0.30.0
GTK+=libgtk-x11-2.0.so.0.2400.10
Poppler=libpoppler.so.19.0.0
Qt4=libQtCore.so.4.8.1
SDL=libSDL-1.2.so.0.11.3

3) Provide a little project that reproduces the bug or the crash.

4) If your project needs a database, try to provide it, or part of it.

5) Explain clearly how to reproduce the bug or the crash.

Change profiling settings and close project property window, reopen, no  
change.
Same on project save.

6) By doing that carefully, you have done 50% of the bug fix job!

FIX:
Insert line

     .Profiling = cmbProfile.Index = 0

On line 199 in file FProjectProperty.class

IMPORTANT NOTE: if you encounter several different problems or bugs, (for
example, a bug in your project, and an interpreter crash while debugging
it), please create distinct issues!

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From vuott at ...325...  Tue Jun 25 23:16:53 2013
From: vuott at ...325... (Ru Vuott)
Date: Tue, 25 Jun 2013 22:16:53 +0100 (BST)
Subject: [Gambas-user] 16 \ 2 ^ 3 = ...Type mismatich error....
Message-ID: <1372195013.64702.YahooMailBasic@...3063...>

Hello,

why, if writing:
  
   Print 16 \ 2 ^ 3

I obtain the error: "Type mismatich: wanted Integer, got Float instead" ?

Thanks

vuott



From dr.diesel at ...626...  Wed Jun 26 00:10:12 2013
From: dr.diesel at ...626... (dr.diesel)
Date: Tue, 25 Jun 2013 15:10:12 -0700 (PDT)
Subject: [Gambas-user] Help binding to /dev/usbtmc0?
Message-ID: <1372198211969-42276.post@...3046...>

Hello all,

I'm trying to communicate to a Rigol spectrum analyzer, which is routed to
/dev/usbtmc0 once connected via USB.  You can easily echo and cat serial
commands to usbtmc0 but I'd prefer to use a socket of some sort, any
suggestions on how to do this via gambas?

usbtmc0 has no port speed or port number so don't think I can use gambas
sockets etc?

Basically I'd like the same functionality as a standard serial port, without
the baud rate, parity, stop bits etc.

Many thanks





--
View this message in context: http://gambas.8142.n7.nabble.com/Help-binding-to-dev-usbtmc0-tp42276.html
Sent from the gambas-user mailing list archive at Nabble.com.



From gambas at ...2524...  Wed Jun 26 01:17:47 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Tue, 25 Jun 2013 23:17:47 +0000
Subject: [Gambas-user] Issue 446 in gambas: Select statement returns no data
Message-ID: <0-6813199134517018827-9838962008381908090-gambas=googlecode.com@...2524...>

Status: New
Owner: ----
Labels: Version Type-Bug Priority-Medium OpSys-Any Dist-Any Arch-Any  
Desktop-Any GUI-Any

New issue 446 by BugCatch... at ...626...: Select statement returns no data
http://code.google.com/p/gambas/issues/detail?id=446

1) Describe the problem.
I have written this query, but it does not return any data:
Select * From Inventory Where InventoryId In ( 'Select InventoryId From  
Topics2InventoryXref Where TopicId = 18') order by Description

Does Gambas support this kind of SQL query?



I even tried it without the "order by Description" with the same results:
sqlite3: 0x20045a0: Select * From Inventory Where InventoryId In ( 'Select  
InventoryId From Topics2InventoryXref Where TopicId = 18')
rsInventory.Count = 0
rsInventory.Available =
rsInventory.Max = -1

I have checked the Gambas Documentation Wiki, gambasdoc.org, sourceforge  
and the internet for hints on how to fix this problem.

I have checked that each select by itself does return data:
sqlite3: 0x20045a0: Select InventoryId From Topics2InventoryXref Where  
TopicId = 18
rsXref.Count = 65

sqlite3: 0x168fe10: Select * From Inventory Where InventoryId In (300, 311,  
322, 53451, 62520)
rsInventory.Count = 5
rsInventory.Available = True
rsInventory.Max = 4


I even changed the fields in the DB so that they are integers and have  
matching names for the same field in the two different tables. No luck.

I tried using the "edit" version as well as the DB.substitution approach,  
but no luck.

What say ye, oh great and wise ones?

2) GIVE THE FOLLOWING INFORMATION (if they are appropriate):

Version: TRUNK or BRANCHES/2.0 or 2.22.0
Revision: r1234 (if you use a development version)
Operating system: Linux / FreeBSD
Distribution: Ubuntu / Fedora / ArchLinux / Gentoo ...
Architecture: x86 / x86_64 / ARM
GUI component: QT3 / QT4 / GTK+
Desktop used: Gnome / KDE ...

3) Provide a little project that reproduces the bug or the crash.
See attached Test Bed project.

4) If your project needs a database, try to provide it, or part of it.
See attached


5) Explain clearly how to reproduce the bug or the crash.

Start program in IDE
Wait till tables have been filled. Go to "Topics" tab.
Double-Click on the "Book of Mormon" entry.

Program will stop and console will show:"

Kaaabooom!
Kaaabooom!


6) By doing that carefully, you have done 50% of the bug fix job!

IMPORTANT NOTE: if you encounter several different problems or bugs, (for
example, a bug in your project, and an interpreter crash while debugging
it), please create distinct issues!


Attachments:
	ChurchLibraryInteger.sqlite  109 KB
	LibraryDatabaseProgram - New all integer DB --Test Bed.tar.bz2  129 KB

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From gambas at ...2524...  Wed Jun 26 01:28:03 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Tue, 25 Jun 2013 23:28:03 +0000
Subject: [Gambas-user] Issue 446 in gambas: Select statement returns no
	data
In-Reply-To: <0-6813199134517018827-9838962008381908090-gambas=googlecode.com@...2524...>
References: <0-6813199134517018827-9838962008381908090-gambas=googlecode.com@...2524...>
Message-ID: <1-6813199134517018827-9838962008381908090-gambas=googlecode.com@...2524...>


Comment #1 on issue 446 by ea7... at ...626...: Select statement returns no  
data
http://code.google.com/p/gambas/issues/detail?id=446

I think you have to get rid of single quotes in the nested query. Try this  
as:

Select * From Inventory Where InventoryId In (Select InventoryId From  
Topics2InventoryXref Where TopicId = 18)

Regards


-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From paulwheeler at ...546...  Wed Jun 26 03:18:15 2013
From: paulwheeler at ...546... (paulwheeler)
Date: Tue, 25 Jun 2013 18:18:15 -0700
Subject: [Gambas-user] Issue 446 in gambas: Select statement returns no
 data
In-Reply-To: <snUT1l0121uq7CQ01nUU82>
References: <0-6813199134517018827-9838962008381908090-gambas=googlecode.com@...2524...>
	<snUT1l0121uq7CQ01nUU82>
Message-ID: <51CA4157.4020101@...546...>

Thank you,

That worked.

However, when I uncommented the tvwInventory load code a few lines down, 
I now get a "Bad Row Index" message.

Not sure how tvwInventory[iCounter, 0].Text with iCounter equal to 0 can 
be a bad row, but that is what it says!


I took the exact same code from another section that is loading the 
exact same tableview, and it works perfectly fine!


How is this possible?


P
On 06/25/2013 04:28 PM, gambas at ...2524... wrote:
> Comment #1 on issue 446 by ea7... at ...626...: Select statement returns no
> data
> http://code.google.com/p/gambas/issues/detail?id=446
>
> I think you have to get rid of single quotes in the nested query. Try this
> as:
>
> Select * From Inventory Where InventoryId In (Select InventoryId From
> Topics2InventoryXref Where TopicId = 18)
>
> Regards
>
>




From taboege at ...626...  Wed Jun 26 09:42:01 2013
From: taboege at ...626... (Tobias Boege)
Date: Wed, 26 Jun 2013 09:42:01 +0200
Subject: [Gambas-user] Help binding to /dev/usbtmc0?
In-Reply-To: <1372198211969-42276.post@...3046...>
References: <1372198211969-42276.post@...3046...>
Message-ID: <20130626074201.GA519@...2774...>

On Tue, 25 Jun 2013, dr.diesel wrote:
> Hello all,
> 
> I'm trying to communicate to a Rigol spectrum analyzer, which is routed to
> /dev/usbtmc0 once connected via USB.  You can easily echo and cat serial
> commands to usbtmc0 but I'd prefer to use a socket of some sort, any
> suggestions on how to do this via gambas?
> 
> usbtmc0 has no port speed or port number so don't think I can use gambas
> sockets etc?
> 
> Basically I'd like the same functionality as a standard serial port, without
> the baud rate, parity, stop bits etc.
> 

Maybe you mistake "port" as in "serial port" and "port" as in "tcp port".
Actually /dev/usbtmc0 is a file. You cannot access it by sockets since it
has nohting to do with networking.

You should OPEN the device file and then PRINT and READ data just like echo
and cat do (the code assumes that I/O of the device file is line-based):

---
Dim hDevice As File ' No socket involved
Dim sLine As String

hDevice = Open "/dev/usbtmc0" For Input Output
' Write to it
Print #hDevice, "Command"
' Read from it
Line Input #hDevice, sLine
---

Depending on your needs, you may want to add the WATCH flag (and an event
name) to OPEN.

Regards,
Tobi



From gambas at ...2524...  Wed Jun 26 15:55:43 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Wed, 26 Jun 2013 13:55:43 +0000
Subject: [Gambas-user] Issue 438 in gambas: gb.xml.rpc sometimes doesn't
 parse data correctly due to incompleteness of received data
In-Reply-To: <3-6813199134517018827-16924913522877771443-gambas=googlecode.com@...2524...>
References: <3-6813199134517018827-16924913522877771443-gambas=googlecode.com@...2524...>
	<0-6813199134517018827-16924913522877771443-gambas=googlecode.com@...2524...>
Message-ID: <4-6813199134517018827-16924913522877771443-gambas=googlecode.com@...2524...>


Comment #4 on issue 438 by francois... at ...626...: gb.xml.rpc sometimes  
doesn't parse data correctly due to incompleteness of received data
http://code.google.com/p/gambas/issues/detail?id=438

When i look in latest revision i don't see the fix in miniserver.class :
     For cCount = 1 to 100 step 1
       cLen = Len(hBuffer[Bucle]) - InStr(hBuffer[Bucle], Chr(13) & Chr(10)  
& Chr(13) & Chr(10)) - 3
       If cLen = hLen[Bucle] Then Break
       Wait 0.01
     Next
Instead i see a hs.begin ... hs.Send in the hError method.
Benoit says that this is the way he implemented the fix...

I don't understand the relation between those two fixes...
The problem comes from the server which cannot handle multiple ip packets.
Trying to make the client send the request in one packet cannot be a good  
solution because the message could exceed the ip packet size.

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From gambas at ...2524...  Wed Jun 26 22:00:59 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Wed, 26 Jun 2013 20:00:59 +0000
Subject: [Gambas-user] Issue 446 in gambas: Select statement returns no
	data
In-Reply-To: <1-6813199134517018827-9838962008381908090-gambas=googlecode.com@...2524...>
References: <1-6813199134517018827-9838962008381908090-gambas=googlecode.com@...2524...>
	<0-6813199134517018827-9838962008381908090-gambas=googlecode.com@...2524...>
Message-ID: <2-6813199134517018827-9838962008381908090-gambas=googlecode.com@...2524...>


Comment #2 on issue 446 by BugCatch... at ...626...: Select statement returns  
no data
http://code.google.com/p/gambas/issues/detail?id=446

Thank you. That solved the problem.

Paul

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From vuott at ...325...  Wed Jun 26 23:28:37 2013
From: vuott at ...325... (Ru Vuott)
Date: Wed, 26 Jun 2013 22:28:37 +0100 (BST)
Subject: [Gambas-user] Error playing File Midi with libgstreamer new version
Message-ID: <1372282117.32535.YahooMailBasic@...3066...>

Hello,

I made ??an application for listening to audio files as well as Midi files.With the previous version of the component "gb.media" Midi files could be performed and could be heard.

Now, with the new version of the "gb.media", which uses the new version of GStreamer 1.0.6, if I want to play Midi files, inexplicably I get an error "cannot set status" to the function "Play ()" of MediaPlayer class element.
I would like to know if the same problem happens to someone who has made and/or uses ??a similar application.

Thanks
Regards
vuott



From keithclark at ...2185...  Wed Jun 26 23:17:56 2013
From: keithclark at ...2185... (Keith Clark)
Date: Wed, 26 Jun 2013 17:17:56 -0400
Subject: [Gambas-user] read/data commands
Message-ID: <51CB5A84.9040400@...2185...>

Does Gambas support read/data commands like the following for loading a 
simple array with fixed values?

for t=0 to 4
     for x = 0 to 4
         read v(t,x)
     next x
next t

data 1,2,3,4,5,1,2,3,4,5,1,2,3,4,5......

Maybe I'm just not finding it?



From gambas at ...1...  Thu Jun 27 00:46:03 2013
From: gambas at ...1... (=?UTF-8?B?QmVub8OudCBNaW5pc2luaQ==?=)
Date: Thu, 27 Jun 2013 00:46:03 +0200
Subject: [Gambas-user] Error playing File Midi with libgstreamer new
	version
In-Reply-To: <1372282117.32535.YahooMailBasic@...3066...>
References: <1372282117.32535.YahooMailBasic@...3066...>
Message-ID: <51CB6F2B.6060804@...1...>

Le 26/06/2013 23:28, Ru Vuott a ?crit :
> Hello,
>
> I made ??an application for listening to audio files as well as Midi files.With the previous version of the component "gb.media" Midi files could be performed and could be heard.
>
> Now, with the new version of the "gb.media", which uses the new version of GStreamer 1.0.6, if I want to play Midi files, inexplicably I get an error "cannot set status" to the function "Play ()" of MediaPlayer class element.
> I would like to know if the same problem happens to someone who has made and/or uses ??a similar application.
>
> Thanks
> Regards
> vuott
>

Can you send me your midi file? Thanks!

-- 
Beno?t Minisini



From vuott at ...325...  Thu Jun 27 03:08:06 2013
From: vuott at ...325... (Ru Vuott)
Date: Thu, 27 Jun 2013 02:08:06 +0100 (BST)
Subject: [Gambas-user] Error playing File Midi with libgstreamer new
	version
In-Reply-To: <51CB6F2B.6060804@...1...>
Message-ID: <1372295286.7221.YahooMailBasic@...3070...>

Hello Beno?t,

excuse me, but... do you want the "midi File" or my gb.media application ?

....I suppose my application. 

bye
vuott



--------------------------------------------
Gio 27/6/13, Beno?t Minisini <gambas at ...1...> ha scritto:

 Oggetto: Re: [Gambas-user] Error playing File Midi with libgstreamer new version
 A: gambas-user at lists.sourceforge.net
 Data: Gioved? 27 giugno 2013, 00:46
 
 Le 26/06/2013 23:28, Ru Vuott a
 ?crit :
 > Hello,
 >
 > I made ??an application for listening to audio
 files as well as Midi files.With the previous version of the
 component "gb.media" Midi files could be performed and could
 be heard.
 >
 > Now, with the new version of the "gb.media", which uses
 the new version of GStreamer 1.0.6, if I want to play Midi
 files, inexplicably I get an error "cannot set status" to
 the function "Play ()" of MediaPlayer class element.
 > I would like to know if the same problem happens to
 someone who has made and/or uses ??a similar
 application.
 >
 > Thanks
 > Regards
 > vuott
 >
 
 Can you send me your midi file? Thanks!
 
 -- 
 Beno?t Minisini
 
 ------------------------------------------------------------------------------
 This SF.net email is sponsored by Windows:
 
 Build for Windows Store.
 
 http://p.sf.net/sfu/windows-dev2dev
 _______________________________________________
 Gambas-user mailing list
 Gambas-user at lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/gambas-user




From sotema at ...626...  Thu Jun 27 09:52:04 2013
From: sotema at ...626... (Emanuele Sottocorno)
Date: Thu, 27 Jun 2013 09:52:04 +0200
Subject: [Gambas-user] Postgresql 9.x error with Blob field
Message-ID: <1372319524.2504.20.camel@...2516...>

Since version 9.0 of Postgresql server, DB.Postgresql component fails
saving an image file to a blob field type. Maybe due a change in
postgresql internals the escaping sequence produces a bad text. No error
on Insert/Select statement, but when you try to load the image into a
PictureBox you get the error 'Unable to load picture'. PictureDatabase
example can be used to test it.
With dumphex command on retrieved file you can note that is not a valid
image file.
Attached the first line output of hexdump -c of gambas logo and same
image inserted into a blob field.


-------------- next part --------------
A non-text attachment was scrubbed...
Name: blob_field.tar.gz
Type: application/x-compressed-tar
Size: 229 bytes
Desc: not available
URL: <http://lists.gambas-basic.org/pipermail/user/attachments/20130627/7d89c25b/attachment.bin>

From taboege at ...626...  Thu Jun 27 11:34:33 2013
From: taboege at ...626... (Tobias Boege)
Date: Thu, 27 Jun 2013 11:34:33 +0200
Subject: [Gambas-user] read/data commands
In-Reply-To: <51CB5A84.9040400@...2185...>
References: <51CB5A84.9040400@...2185...>
Message-ID: <20130627093433.GA790@...2774...>

On Wed, 26 Jun 2013, Keith Clark wrote:
> Does Gambas support read/data commands like the following for loading a 
> simple array with fixed values?
> 
> for t=0 to 4
>      for x = 0 to 4
>          read v(t,x)
>      next x
> next t
> 
> data 1,2,3,4,5,1,2,3,4,5,1,2,3,4,5......
> 
> Maybe I'm just not finding it?
> 

I don't know what you want to do, actually, and your snippet does not
resemble Gambas at all... Maybe you want to access elements of a 2D array
where t is the row and x is the column? So if v is an Integer[][], then you
need to do:

For t = 0 To 4
  For x = 0 To 4
    Print v[t][x]
  Next
Next

Regards,
Tobi



From gambas at ...1...  Thu Jun 27 11:41:34 2013
From: gambas at ...1... (=?UTF-8?B?QmVub8OudCBNaW5pc2luaQ==?=)
Date: Thu, 27 Jun 2013 11:41:34 +0200
Subject: [Gambas-user] Error playing File Midi with libgstreamer new
	version
In-Reply-To: <1372295286.7221.YahooMailBasic@...3070...>
References: <1372295286.7221.YahooMailBasic@...3070...>
Message-ID: <51CC08CE.1070506@...1...>

Le 27/06/2013 03:08, Ru Vuott a ?crit :
> Hello Beno?t,
>
> excuse me, but... do you want the "midi File" or my gb.media application ?
>
> ....I suppose my application.
>
> bye
> vuott
>

No, the midi file: I want to play it with the MediaPlayer example to 
reproduce the problem.

-- 
Beno?t Minisini



From alberto.kavan at ...626...  Thu Jun 27 12:03:42 2013
From: alberto.kavan at ...626... (Alberto Caballero)
Date: Thu, 27 Jun 2013 12:03:42 +0200
Subject: [Gambas-user] Multiple charts using gb.chart
Message-ID: <CAJo4JMbYuMHXWORQPO7StPWScXziWjpHm_+sumvLB_tGChOu5g@...627...>

Hi all,

I am trying to show multiple charts inside a TabView. I managed to show
only one chart. I only get compilation errors or the new chart is not
displayed. I tried to find something to help me in the internet, and even
in this mailing list, but I was unable to find anything.

Would you provide me any reference or an example to have a look?

Thanks in advance,

Alberto


From taboege at ...626...  Thu Jun 27 12:08:33 2013
From: taboege at ...626... (Tobias Boege)
Date: Thu, 27 Jun 2013 12:08:33 +0200
Subject: [Gambas-user] Draw fill styles with Paint class?
Message-ID: <20130627100833.GC790@...2774...>

Hi,

I wonder if one could use the Draw.FillStyles (the Fill.* constants)
together with the Paint class somehow (dropping any reference to the Draw
class) - or do I have to do things like File.Dense6 myself with Paint? Is
there maybe any PaintBrush magic involved?

As I remember, the Draw class is now implemented on top of Paint but I
couldn't find the sources (not even the definition of GB_DRAW)...

Regards,
Tobi



From gambas at ...1...  Thu Jun 27 12:17:00 2013
From: gambas at ...1... (=?ISO-8859-1?Q?Beno=EEt_Minisini?=)
Date: Thu, 27 Jun 2013 12:17:00 +0200
Subject: [Gambas-user] Draw fill styles with Paint class?
In-Reply-To: <20130627100833.GC790@...2774...>
References: <20130627100833.GC790@...2774...>
Message-ID: <51CC111C.3000509@...1...>

Le 27/06/2013 12:08, Tobias Boege a ?crit :
> Hi,
>
> I wonder if one could use the Draw.FillStyles (the Fill.* constants)
> together with the Paint class somehow (dropping any reference to the Draw
> class) - or do I have to do things like File.Dense6 myself with Paint? Is
> there maybe any PaintBrush magic involved?
>
> As I remember, the Draw class is now implemented on top of Paint but I
> couldn't find the sources (not even the definition of GB_DRAW)...
>
> Regards,
> Tobi
>

The Draw class source code is in the gb.gui.base component 
(/comp/src/gb.gui.base).

-- 
Beno?t Minisini



From taboege at ...626...  Thu Jun 27 12:31:24 2013
From: taboege at ...626... (Tobias Boege)
Date: Thu, 27 Jun 2013 12:31:24 +0200
Subject: [Gambas-user] Draw fill styles with Paint class?
In-Reply-To: <51CC111C.3000509@...1...>
References: <20130627100833.GC790@...2774...>
	<51CC111C.3000509@...1...>
Message-ID: <20130627103124.GD790@...2774...>

On Thu, 27 Jun 2013, Beno?t Minisini wrote:
> Le 27/06/2013 12:08, Tobias Boege a ?crit :
> > Hi,
> >
> > I wonder if one could use the Draw.FillStyles (the Fill.* constants)
> > together with the Paint class somehow (dropping any reference to the Draw
> > class) - or do I have to do things like File.Dense6 myself with Paint? Is
> > there maybe any PaintBrush magic involved?
> >
> > As I remember, the Draw class is now implemented on top of Paint but I
> > couldn't find the sources (not even the definition of GB_DRAW)...
> >
> > Regards,
> > Tobi
> >
> 
> The Draw class source code is in the gb.gui.base component 
> (/comp/src/gb.gui.base).
> 

Makes sense now that you said it. OK, got it. Thanks.

Regards,
Tobi



From sotema at ...626...  Thu Jun 27 14:12:55 2013
From: sotema at ...626... (Emanuele Sottocorno)
Date: Thu, 27 Jun 2013 14:12:55 +0200
Subject: [Gambas-user] Postgresql 9.x error with Blob field
Message-ID: <1372335175.2897.3.camel@...2516...>

Hi Benoit,
changing the parameter 'bytea_output' in postgresql.conf file from 'hex'
to 'escape' fix the problem. I don't remember if that was the default
value till 8.4 version. I'll check it this evening when i get back home.
Thanks.
Emanuele




From vuott at ...325...  Thu Jun 27 14:39:06 2013
From: vuott at ...325... (Ru Vuott)
Date: Thu, 27 Jun 2013 13:39:06 +0100 (BST)
Subject: [Gambas-user] Error playing File Midi with libgstreamer new
	version
Message-ID: <1372336746.74810.YahooMailBasic@...3066...>

Ah... Ok. No problem: Midi file attached here.

I tried the midi file with MediaPlayer example, but at loading I get error: "GStreamer encountered a general stream error".

In console:

 No decoder available for type 'audio/midi'.
[*] Your GStreamer installation is missing a plug-in.
[*] A audio/midi decoder plugin is required to play this stream, but not installed.
[*] GStreamer encountered a general stream error.


Bye
vuott


--------------------------------------------
Gio 27/6/13, Beno?t Minisini <gambas at ...1...> ha scritto:

 Oggetto: Re: [Gambas-user] Error playing File Midi with libgstreamer new version
 A: "mailing list for gambas users" <gambas-user at lists.sourceforge.net>
 Data: Gioved? 27 giugno 2013, 11:41
 
 Le 27/06/2013 03:08, Ru Vuott a
 ?crit :
 > Hello Beno?t,
 >
 > excuse me, but... do you want the "midi File" or my
 gb.media application ?
 >
 > ....I suppose my application.
 >
 > bye
 > vuott
 >
 
 No, the midi file: I want to play it with the MediaPlayer
 example to 
 reproduce the problem.
 
 -- 
 Beno?t Minisini
 
 ------------------------------------------------------------------------------
 This SF.net email is sponsored by Windows:
 
 Build for Windows Store.
 
 http://p.sf.net/sfu/windows-dev2dev
 _______________________________________________
 Gambas-user mailing list
 Gambas-user at lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/gambas-user
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 4bros.mid
Type: audio/midi
Size: 25088 bytes
Desc: not available
URL: <http://lists.gambas-basic.org/pipermail/user/attachments/20130627/b1e740d8/attachment.mid>

From vuott at ...325...  Thu Jun 27 15:41:08 2013
From: vuott at ...325... (Ru Vuott)
Date: Thu, 27 Jun 2013 14:41:08 +0100 (BST)
Subject: [Gambas-user] Error playing File Midi with libgstreamer... - BIS
In-Reply-To: <1372336746.74810.YahooMailBasic@...3066...>
Message-ID: <1372340468.23032.YahooMailBasic@...3054...>

About my console results:
 [*] Your GStreamer installation is missing a plug-in.
 [*] A audio/midi decoder plugin is required to play this stream, but not installed.

I want to add that I installed:
   libgstreamer-plugins-base1.0-dev




--------------------------------------------
Gio 27/6/13, Ru Vuott <vuott at ...325...> ha scritto:

 Oggetto: Re: [Gambas-user] Error playing File Midi with libgstreamer new version
 A: "mailing list for gambas users" <gambas-user at lists.sourceforge.net>
 Data: Gioved? 27 giugno 2013, 14:39
 
 Ah... Ok. No problem: Midi file
 attached here.
 
 I tried the midi file with MediaPlayer example, but at
 loading I get error: "GStreamer encountered a general stream
 error".
 
 In console:
 
  No decoder available for type 'audio/midi'.
 [*] Your GStreamer installation is missing a plug-in.
 [*] A audio/midi decoder plugin is required to play this
 stream, but not installed.
 [*] GStreamer encountered a general stream error.
 
 
 Bye
 vuott
 
 
 --------------------------------------------
 Gio 27/6/13, Beno?t Minisini <gambas at ...1...>
 ha scritto:
 
  Oggetto: Re: [Gambas-user] Error playing File Midi with
 libgstreamer new version
  A: "mailing list for gambas users" <gambas-user at lists.sourceforge.net>
  Data: Gioved? 27 giugno 2013, 11:41
  
  Le 27/06/2013 03:08, Ru Vuott a
  ?crit :
  > Hello Beno?t,
  >
  > excuse me, but... do you want the "midi File" or my
  gb.media application ?
  >
  > ....I suppose my application.
  >
  > bye
  > vuott
  >
  
  No, the midi file: I want to play it with the MediaPlayer
  example to 
  reproduce the problem.
  
  -- 
  Beno?t Minisini
  
  ------------------------------------------------------------------------------
  This SF.net email is sponsored by Windows:
  
  Build for Windows Store.
  
  http://p.sf.net/sfu/windows-dev2dev
  _______________________________________________
  Gambas-user mailing list
  Gambas-user at lists.sourceforge.net
  https://lists.sourceforge.net/lists/listinfo/gambas-user
 -----Segue allegato-----
 
 ------------------------------------------------------------------------------
 This SF.net email is sponsored by Windows:
 
 Build for Windows Store.
 
 http://p.sf.net/sfu/windows-dev2dev
 -----Segue allegato-----
 
 _______________________________________________
 Gambas-user mailing list
 Gambas-user at lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/gambas-user




From vuott at ...325...  Thu Jun 27 18:07:29 2013
From: vuott at ...325... (Ru Vuott)
Date: Thu, 27 Jun 2013 17:07:29 +0100 (BST)
Subject: [Gambas-user]  Error playing File Midi with libgstreamer - TER
In-Reply-To: <51CC08CE.1070506@...1...>
Message-ID: <1372349249.56235.YahooMailBasic@...3054...>

Hello Beno?t,

I posted a question in GStreamer Mailing List about no-Playing Midi file with GStramer version 1.0.6.

I had 2 answers, here:
-----
There's a "wildmidi" plugin in -plugins-bad that may help? There's also
"timidity", but it hasn't been ported to GStreamer 1.0 yet (and I can't
figure out how to install the dependencies, but it may be easy to port).
-------


--------
It should work in git master or the 1.1.1 development release. There's a
new fluidsynth plugin. If you make a sample file available we can test it.

Also see:
https://bugzilla.gnome.org/show_bug.cgi?id=696041
https://bugzilla.gnome.org/show_bug.cgi?id=690892

I think "Midi support" in the FAQ means something else (more like
sending midi data through the pipeline etc.)
------

Bye
vuott



--------------------------------------------
Gio 27/6/13, Beno?t Minisini <gambas at ...1...> ha scritto:

 Oggetto: Re: [Gambas-user] Error playing File Midi with libgstreamer new version
 A: "mailing list for gambas users" <gambas-user at lists.sourceforge.net>
 Data: Gioved? 27 giugno 2013, 11:41
 
 Le 27/06/2013 03:08, Ru Vuott a
 ?crit :
 > Hello Beno?t,
 >
 > excuse me, but... do you want the "midi File" or my
 gb.media application ?
 >
 > ....I suppose my application.
 >
 > bye
 > vuott
 >
 
 No, the midi file: I want to play it with the MediaPlayer
 example to 
 reproduce the problem.
 
 -- 
 Beno?t Minisini
 
 ------------------------------------------------------------------------------
 This SF.net email is sponsored by Windows:
 
 Build for Windows Store.
 
 http://p.sf.net/sfu/windows-dev2dev
 _______________________________________________
 Gambas-user mailing list
 Gambas-user at lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/gambas-user




From jussi.lahtinen at ...626...  Thu Jun 27 20:00:16 2013
From: jussi.lahtinen at ...626... (Jussi Lahtinen)
Date: Thu, 27 Jun 2013 21:00:16 +0300
Subject: [Gambas-user] 16 \ 2 ^ 3 = ...Type mismatich error....
In-Reply-To: <1372195013.64702.YahooMailBasic@...3063...>
References: <1372195013.64702.YahooMailBasic@...3063...>
Message-ID: <CAFJMe7SntPXCe3e47-i3jDHvT5a2bP_M5H=-OoJxr0rsLA0fLw@...627...>

 x \ y doesn't take floats (x / y however does), and exponent will return
float instead of integer.
Not sure this is what Benoit intended. I would expect automatic conversion,
though that might lead to hidden unexpected behaviour which is worse.

This should work:
Print 16 \ cint(2 ^ 3)


Jussi


From vuott at ...325...  Thu Jun 27 20:21:01 2013
From: vuott at ...325... (Ru Vuott)
Date: Thu, 27 Jun 2013 19:21:01 +0100 (BST)
Subject: [Gambas-user] 16 \ 2 ^ 3 = ...Type mismatich error....
In-Reply-To: <CAFJMe7SntPXCe3e47-i3jDHvT5a2bP_M5H=-OoJxr0rsLA0fLw@...627...>
Message-ID: <1372357261.95869.YahooMailBasic@...3066...>

Well, so aritmetic operator \ doesn't accept float numbers.

Thank you, Jussi

bye
vuottttt





--------------------------------------------
Gio 27/6/13, Jussi Lahtinen <jussi.lahtinen at ...626...> ha scritto:

 Oggetto: Re: [Gambas-user] 16 \ 2 ^ 3 = ...Type mismatich error....
 A: "mailing list for gambas users" <gambas-user at lists.sourceforge.net>
 Cc: "Benoit" <gambas at ...1...>
 Data: Gioved? 27 giugno 2013, 20:00
 
  x \ y doesn't take floats (x / y
 however does), and exponent will return
 float instead of integer.
 Not sure this is what Benoit intended. I would expect
 automatic conversion,
 though that might lead to hidden unexpected behaviour which
 is worse.
 
 This should work:
 Print 16 \ cint(2 ^ 3)
 
 
 Jussi
 ------------------------------------------------------------------------------
 This SF.net email is sponsored by Windows:
 
 Build for Windows Store.
 
 http://p.sf.net/sfu/windows-dev2dev
 _______________________________________________
 Gambas-user mailing list
 Gambas-user at lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/gambas-user




From keithclark at ...2185...  Thu Jun 27 21:55:30 2013
From: keithclark at ...2185... (Keith Clark)
Date: Thu, 27 Jun 2013 15:55:30 -0400
Subject: [Gambas-user] read/data commands
In-Reply-To: <20130627093433.GA790@...2774...>
References: <51CB5A84.9040400@...2185...> <20130627093433.GA790@...2774...>
Message-ID: <51CC98B2.6030202@...2185...>

On 13-06-27 05:34 AM, Tobias Boege wrote:
> On Wed, 26 Jun 2013, Keith Clark wrote:
>> Does Gambas support read/data commands like the following for loading a
>> simple array with fixed values?
>>
>> for t=0 to 4
>>       for x = 0 to 4
>>           read v(t,x)
>>       next x
>> next t
>>
>> data 1,2,3,4,5,1,2,3,4,5,1,2,3,4,5......
>>
>> Maybe I'm just not finding it?
>>
> I don't know what you want to do, actually, and your snippet does not
> resemble Gambas at all... Maybe you want to access elements of a 2D array
> where t is the row and x is the column? So if v is an Integer[][], then you
> need to do:
>
> For t = 0 To 4
>    For x = 0 To 4
>      Print v[t][x]
>    Next
> Next
>
> Regards,
> Tobi
>
>
Yeah, I posted that question rather quickly.  I want to fill an array 
with a very simple, fixed dataset that will never change.  The code I 
gave above is from an old dialect, but really just the curved brackets 
should have been square.

for t=0 to 4
      for x = 0 to 4
          read v[t,x]
      next x
next t

data 1,2,3,4,5,1,2,3,4,5,1,2,3,4,5......

Would read into the array v the data in the 'data' statement

v[0,0]=1
v[0,1]=2
and so on.

For reference:
http://www.antonis.de/qbebooks/gwbasman/read.html



From gambas.fr at ...626...  Thu Jun 27 22:19:15 2013
From: gambas.fr at ...626... (Fabien Bodard)
Date: Thu, 27 Jun 2013 22:19:15 +0200
Subject: [Gambas-user] Multiple charts using gb.chart
In-Reply-To: <CAJo4JMbYuMHXWORQPO7StPWScXziWjpHm_+sumvLB_tGChOu5g@...627...>
References: <CAJo4JMbYuMHXWORQPO7StPWScXziWjpHm_+sumvLB_tGChOu5g@...627...>
Message-ID: <CAFkCsL4ZNj4w_7Y2A_qtBSxKJh6sHcjj3_dVG5_wUXM=B_B5zw@...627...>

can you send me your project or a part of it that show the problem ?


2013/6/27 Alberto Caballero <alberto.kavan at ...626...>

> Hi all,
>
> I am trying to show multiple charts inside a TabView. I managed to show
> only one chart. I only get compilation errors or the new chart is not
> displayed. I tried to find something to help me in the internet, and even
> in this mailing list, but I was unable to find anything.
>
> Would you provide me any reference or an example to have a look?
>
> Thanks in advance,
>
> Alberto
>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Windows:
>
> Build for Windows Store.
>
> http://p.sf.net/sfu/windows-dev2dev
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>



-- 
Fabien Bodard


From jussi.lahtinen at ...626...  Thu Jun 27 23:48:38 2013
From: jussi.lahtinen at ...626... (Jussi Lahtinen)
Date: Fri, 28 Jun 2013 00:48:38 +0300
Subject: [Gambas-user] read/data commands
In-Reply-To: <51CC98B2.6030202@...2185...>
References: <51CB5A84.9040400@...2185...> <20130627093433.GA790@...2774...>
	<51CC98B2.6030202@...2185...>
Message-ID: <CAFJMe7T3djPL=tsaxdQsa+p0SfgT-MFg-4q4=_PwVcj82LRuiA@...627...>

I don't quite understand usage of data...

Will this do what you want?

Dim data As Integer[] = [1, 2, 3, 4, 5, 1, 2, 3, 4, 5]
Dim v As New Integer[]

v = data.Copy()


Or this:

Dim ii As Integer, jj As Integer
Dim data As New Integer[5, 5]

For ii = 0 To 4
  For jj = 0 To 4
    data[ii, jj] = jj + 1
  Next
Next


Jussi








On Thu, Jun 27, 2013 at 10:55 PM, Keith Clark <keithclark at ...2185...>wrote:

> On 13-06-27 05:34 AM, Tobias Boege wrote:
> > On Wed, 26 Jun 2013, Keith Clark wrote:
> >> Does Gambas support read/data commands like the following for loading a
> >> simple array with fixed values?
> >>
> >> for t=0 to 4
> >>       for x = 0 to 4
> >>           read v(t,x)
> >>       next x
> >> next t
> >>
> >> data 1,2,3,4,5,1,2,3,4,5,1,2,3,4,5......
> >>
> >> Maybe I'm just not finding it?
> >>
> > I don't know what you want to do, actually, and your snippet does not
> > resemble Gambas at all... Maybe you want to access elements of a 2D array
> > where t is the row and x is the column? So if v is an Integer[][], then
> you
> > need to do:
> >
> > For t = 0 To 4
> >    For x = 0 To 4
> >      Print v[t][x]
> >    Next
> > Next
> >
> > Regards,
> > Tobi
> >
> >
> Yeah, I posted that question rather quickly.  I want to fill an array
> with a very simple, fixed dataset that will never change.  The code I
> gave above is from an old dialect, but really just the curved brackets
> should have been square.
>
> for t=0 to 4
>       for x = 0 to 4
>           read v[t,x]
>       next x
> next t
>
> data 1,2,3,4,5,1,2,3,4,5,1,2,3,4,5......
>
> Would read into the array v the data in the 'data' statement
>
> v[0,0]=1
> v[0,1]=2
> and so on.
>
> For reference:
> http://www.antonis.de/qbebooks/gwbasman/read.html
>
>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Windows:
>
> Build for Windows Store.
>
> http://p.sf.net/sfu/windows-dev2dev
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>


From jussi.lahtinen at ...626...  Thu Jun 27 23:49:30 2013
From: jussi.lahtinen at ...626... (Jussi Lahtinen)
Date: Fri, 28 Jun 2013 00:49:30 +0300
Subject: [Gambas-user] read/data commands
In-Reply-To: <CAFJMe7T3djPL=tsaxdQsa+p0SfgT-MFg-4q4=_PwVcj82LRuiA@...627...>
References: <51CB5A84.9040400@...2185...> <20130627093433.GA790@...2774...>
	<51CC98B2.6030202@...2185...>
	<CAFJMe7T3djPL=tsaxdQsa+p0SfgT-MFg-4q4=_PwVcj82LRuiA@...627...>
Message-ID: <CAFJMe7QVzJ9cChSvyGDRYK2Ncu6sdvJVm7gaPhdFeFQVM8r+0w@...627...>

Sorry, with your correct variable names;

Dim ii As Integer, jj As Integer
Dim v As New Integer[5, 5]

For ii = 0 To 4
  For jj = 0 To 4
    v[ii, jj] = jj + 1
  Next
Next


On Fri, Jun 28, 2013 at 12:48 AM, Jussi Lahtinen
<jussi.lahtinen at ...626...>wrote:

> I don't quite understand usage of data...
>
> Will this do what you want?
>
> Dim data As Integer[] = [1, 2, 3, 4, 5, 1, 2, 3, 4, 5]
> Dim v As New Integer[]
>
> v = data.Copy()
>
>
> Or this:
>
> Dim ii As Integer, jj As Integer
> Dim data As New Integer[5, 5]
>
> For ii = 0 To 4
>   For jj = 0 To 4
>     data[ii, jj] = jj + 1
>   Next
> Next
>
>
> Jussi
>
>
>
>
>
>
>
>
> On Thu, Jun 27, 2013 at 10:55 PM, Keith Clark <keithclark at ...2185...>wrote:
>
>> On 13-06-27 05:34 AM, Tobias Boege wrote:
>> > On Wed, 26 Jun 2013, Keith Clark wrote:
>> >> Does Gambas support read/data commands like the following for loading a
>> >> simple array with fixed values?
>> >>
>> >> for t=0 to 4
>> >>       for x = 0 to 4
>> >>           read v(t,x)
>> >>       next x
>> >> next t
>> >>
>> >> data 1,2,3,4,5,1,2,3,4,5,1,2,3,4,5......
>> >>
>> >> Maybe I'm just not finding it?
>> >>
>> > I don't know what you want to do, actually, and your snippet does not
>> > resemble Gambas at all... Maybe you want to access elements of a 2D
>> array
>> > where t is the row and x is the column? So if v is an Integer[][], then
>> you
>> > need to do:
>> >
>> > For t = 0 To 4
>> >    For x = 0 To 4
>> >      Print v[t][x]
>> >    Next
>> > Next
>> >
>> > Regards,
>> > Tobi
>> >
>> >
>> Yeah, I posted that question rather quickly.  I want to fill an array
>> with a very simple, fixed dataset that will never change.  The code I
>> gave above is from an old dialect, but really just the curved brackets
>> should have been square.
>>
>> for t=0 to 4
>>       for x = 0 to 4
>>           read v[t,x]
>>       next x
>> next t
>>
>> data 1,2,3,4,5,1,2,3,4,5,1,2,3,4,5......
>>
>> Would read into the array v the data in the 'data' statement
>>
>> v[0,0]=1
>> v[0,1]=2
>> and so on.
>>
>> For reference:
>> http://www.antonis.de/qbebooks/gwbasman/read.html
>>
>>
>> ------------------------------------------------------------------------------
>> This SF.net email is sponsored by Windows:
>>
>> Build for Windows Store.
>>
>> http://p.sf.net/sfu/windows-dev2dev
>> _______________________________________________
>> Gambas-user mailing list
>> Gambas-user at lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/gambas-user
>>
>
>


From keithclark at ...2185...  Thu Jun 27 23:54:35 2013
From: keithclark at ...2185... (Keith Clark)
Date: Thu, 27 Jun 2013 17:54:35 -0400
Subject: [Gambas-user] read/data commands
In-Reply-To: <CAFJMe7T3djPL=tsaxdQsa+p0SfgT-MFg-4q4=_PwVcj82LRuiA@...627...>
References: <51CB5A84.9040400@...2185...> <20130627093433.GA790@...2774...>
	<51CC98B2.6030202@...2185...>
	<CAFJMe7T3djPL=tsaxdQsa+p0SfgT-MFg-4q4=_PwVcj82LRuiA@...627...>
Message-ID: <51CCB49B.3080108@...2185...>

No, the data was just an example.  What if it were to be 255 unrelated 
values?

Did nobody else use BASIC from the 80s?

Read/Data statments.....

On 13-06-27 05:48 PM, Jussi Lahtinen wrote:
> I don't quite understand usage of data...
>
> Will this do what you want?
>
> Dim data As Integer[] = [1, 2, 3, 4, 5, 1, 2, 3, 4, 5]
> Dim v As New Integer[]
>
> v = data.Copy()
>
>
> Or this:
>
> Dim ii As Integer, jj As Integer
> Dim data As New Integer[5, 5]
>
> For ii = 0 To 4
>    For jj = 0 To 4
>      data[ii, jj] = jj + 1
>    Next
> Next
>
>
> Jussi
>
>
>
>
>
>
>
>
> On Thu, Jun 27, 2013 at 10:55 PM, Keith Clark <keithclark at ...2185...>wrote:
>
>> On 13-06-27 05:34 AM, Tobias Boege wrote:
>>> On Wed, 26 Jun 2013, Keith Clark wrote:
>>>> Does Gambas support read/data commands like the following for loading a
>>>> simple array with fixed values?
>>>>
>>>> for t=0 to 4
>>>>        for x = 0 to 4
>>>>            read v(t,x)
>>>>        next x
>>>> next t
>>>>
>>>> data 1,2,3,4,5,1,2,3,4,5,1,2,3,4,5......
>>>>
>>>> Maybe I'm just not finding it?
>>>>
>>> I don't know what you want to do, actually, and your snippet does not
>>> resemble Gambas at all... Maybe you want to access elements of a 2D array
>>> where t is the row and x is the column? So if v is an Integer[][], then
>> you
>>> need to do:
>>>
>>> For t = 0 To 4
>>>     For x = 0 To 4
>>>       Print v[t][x]
>>>     Next
>>> Next
>>>
>>> Regards,
>>> Tobi
>>>
>>>
>> Yeah, I posted that question rather quickly.  I want to fill an array
>> with a very simple, fixed dataset that will never change.  The code I
>> gave above is from an old dialect, but really just the curved brackets
>> should have been square.
>>
>> for t=0 to 4
>>        for x = 0 to 4
>>            read v[t,x]
>>        next x
>> next t
>>
>> data 1,2,3,4,5,1,2,3,4,5,1,2,3,4,5......
>>
>> Would read into the array v the data in the 'data' statement
>>
>> v[0,0]=1
>> v[0,1]=2
>> and so on.
>>
>> For reference:
>> http://www.antonis.de/qbebooks/gwbasman/read.html
>>
>>
>> ------------------------------------------------------------------------------
>> This SF.net email is sponsored by Windows:
>>
>> Build for Windows Store.
>>
>> http://p.sf.net/sfu/windows-dev2dev
>> _______________________________________________
>> Gambas-user mailing list
>> Gambas-user at lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/gambas-user
>>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Windows:
>
> Build for Windows Store.
>
> http://p.sf.net/sfu/windows-dev2dev
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user



From tom at ...3139...  Fri Jun 28 00:03:11 2013
From: tom at ...3139... (Tom)
Date: Thu, 27 Jun 2013 18:03:11 -0400
Subject: [Gambas-user] read/data commands
In-Reply-To: <51CCB49B.3080108@...2185...>
References: <51CB5A84.9040400@...2185...> <20130627093433.GA790@...2774...>
	<51CC98B2.6030202@...2185...>
	<CAFJMe7T3djPL=tsaxdQsa+p0SfgT-MFg-4q4=_PwVcj82LRuiA@...627...>
	<51CCB49B.3080108@...2185...>
Message-ID: <51CCB69F.5040507@...3139...>

The way I remember it was:  (your second example)

Dim data[5, 5] As Integer

On 6/27/2013 5:54 PM, Keith Clark wrote:
> No, the data was just an example.  What if it were to be 255 unrelated
> values?
>
> Did nobody else use BASIC from the 80s?
>
> Read/Data statments.....
>
> On 13-06-27 05:48 PM, Jussi Lahtinen wrote:
>> I don't quite understand usage of data...
>>
>> Will this do what you want?
>>
>> Dim data As Integer[] = [1, 2, 3, 4, 5, 1, 2, 3, 4, 5]
>> Dim v As New Integer[]
>>
>> v = data.Copy()
>>
>>
>> Or this:
>>
>> Dim ii As Integer, jj As Integer
>> Dim data As New Integer[5, 5]
>>
>> For ii = 0 To 4
>>     For jj = 0 To 4
>>       data[ii, jj] = jj + 1
>>     Next
>> Next
>>
>>
>> Jussi
>>
>>
>>
>>
>>
>>
>>
>>
>> On Thu, Jun 27, 2013 at 10:55 PM, Keith Clark <keithclark at ...2185...>wrote:
>>
>>> On 13-06-27 05:34 AM, Tobias Boege wrote:
>>>> On Wed, 26 Jun 2013, Keith Clark wrote:
>>>>> Does Gambas support read/data commands like the following for loading a
>>>>> simple array with fixed values?
>>>>>
>>>>> for t=0 to 4
>>>>>         for x = 0 to 4
>>>>>             read v(t,x)
>>>>>         next x
>>>>> next t
>>>>>
>>>>> data 1,2,3,4,5,1,2,3,4,5,1,2,3,4,5......
>>>>>
>>>>> Maybe I'm just not finding it?
>>>>>
>>>> I don't know what you want to do, actually, and your snippet does not
>>>> resemble Gambas at all... Maybe you want to access elements of a 2D array
>>>> where t is the row and x is the column? So if v is an Integer[][], then
>>> you
>>>> need to do:
>>>>
>>>> For t = 0 To 4
>>>>      For x = 0 To 4
>>>>        Print v[t][x]
>>>>      Next
>>>> Next
>>>>
>>>> Regards,
>>>> Tobi
>>>>
>>>>
>>> Yeah, I posted that question rather quickly.  I want to fill an array
>>> with a very simple, fixed dataset that will never change.  The code I
>>> gave above is from an old dialect, but really just the curved brackets
>>> should have been square.
>>>
>>> for t=0 to 4
>>>         for x = 0 to 4
>>>             read v[t,x]
>>>         next x
>>> next t
>>>
>>> data 1,2,3,4,5,1,2,3,4,5,1,2,3,4,5......
>>>
>>> Would read into the array v the data in the 'data' statement
>>>
>>> v[0,0]=1
>>> v[0,1]=2
>>> and so on.
>>>
>>> For reference:
>>> http://www.antonis.de/qbebooks/gwbasman/read.html
>>>
>>>
>>> ------------------------------------------------------------------------------
>>> This SF.net email is sponsored by Windows:
>>>
>>> Build for Windows Store.
>>>
>>> http://p.sf.net/sfu/windows-dev2dev
>>> _______________________________________________
>>> Gambas-user mailing list
>>> Gambas-user at lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/gambas-user
>>>
>> ------------------------------------------------------------------------------
>> This SF.net email is sponsored by Windows:
>>
>> Build for Windows Store.
>>
>> http://p.sf.net/sfu/windows-dev2dev
>> _______________________________________________
>> Gambas-user mailing list
>> Gambas-user at lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/gambas-user
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Windows:
>
> Build for Windows Store.
>
> http://p.sf.net/sfu/windows-dev2dev
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user




From jussi.lahtinen at ...626...  Fri Jun 28 00:22:25 2013
From: jussi.lahtinen at ...626... (Jussi Lahtinen)
Date: Fri, 28 Jun 2013 01:22:25 +0300
Subject: [Gambas-user] read/data commands
In-Reply-To: <51CCB49B.3080108@...2185...>
References: <51CB5A84.9040400@...2185...> <20130627093433.GA790@...2774...>
	<51CC98B2.6030202@...2185...>
	<CAFJMe7T3djPL=tsaxdQsa+p0SfgT-MFg-4q4=_PwVcj82LRuiA@...627...>
	<51CCB49B.3080108@...2185...>
Message-ID: <CAFJMe7Td8nxC4eaZ=MGSZvd12-2FO0Rq04r5_1zOcboZ2B0fUw@...627...>

How about this?

  Dim data As New Integer[][]
  Dim v As New Integer[10, 10]

  data.Add([1, 2, 3, 4, 5])
  data.Add([6, 7, 8, 9, 10, 11])

  For ii = 0 To data.Max
    For jj = 0 To data[ii].Max
      v[ii, jj] = data[ii][jj]
    Next
  Next

Or maybe you want to read the data from file?

Jussi





On Fri, Jun 28, 2013 at 12:54 AM, Keith Clark <keithclark at ...2185...>wrote:

> No, the data was just an example.  What if it were to be 255 unrelated
> values?
>
> Did nobody else use BASIC from the 80s?
>
> Read/Data statments.....
>
> On 13-06-27 05:48 PM, Jussi Lahtinen wrote:
> > I don't quite understand usage of data...
> >
> > Will this do what you want?
> >
> > Dim data As Integer[] = [1, 2, 3, 4, 5, 1, 2, 3, 4, 5]
> > Dim v As New Integer[]
> >
> > v = data.Copy()
> >
> >
> > Or this:
> >
> > Dim ii As Integer, jj As Integer
> > Dim data As New Integer[5, 5]
> >
> > For ii = 0 To 4
> >    For jj = 0 To 4
> >      data[ii, jj] = jj + 1
> >    Next
> > Next
> >
> >
> > Jussi
> >
> >
> >
> >
> >
> >
> >
> >
> > On Thu, Jun 27, 2013 at 10:55 PM, Keith Clark <
> keithclark at ...2185...>wrote:
> >
> >> On 13-06-27 05:34 AM, Tobias Boege wrote:
> >>> On Wed, 26 Jun 2013, Keith Clark wrote:
> >>>> Does Gambas support read/data commands like the following for loading
> a
> >>>> simple array with fixed values?
> >>>>
> >>>> for t=0 to 4
> >>>>        for x = 0 to 4
> >>>>            read v(t,x)
> >>>>        next x
> >>>> next t
> >>>>
> >>>> data 1,2,3,4,5,1,2,3,4,5,1,2,3,4,5......
> >>>>
> >>>> Maybe I'm just not finding it?
> >>>>
> >>> I don't know what you want to do, actually, and your snippet does not
> >>> resemble Gambas at all... Maybe you want to access elements of a 2D
> array
> >>> where t is the row and x is the column? So if v is an Integer[][], then
> >> you
> >>> need to do:
> >>>
> >>> For t = 0 To 4
> >>>     For x = 0 To 4
> >>>       Print v[t][x]
> >>>     Next
> >>> Next
> >>>
> >>> Regards,
> >>> Tobi
> >>>
> >>>
> >> Yeah, I posted that question rather quickly.  I want to fill an array
> >> with a very simple, fixed dataset that will never change.  The code I
> >> gave above is from an old dialect, but really just the curved brackets
> >> should have been square.
> >>
> >> for t=0 to 4
> >>        for x = 0 to 4
> >>            read v[t,x]
> >>        next x
> >> next t
> >>
> >> data 1,2,3,4,5,1,2,3,4,5,1,2,3,4,5......
> >>
> >> Would read into the array v the data in the 'data' statement
> >>
> >> v[0,0]=1
> >> v[0,1]=2
> >> and so on.
> >>
> >> For reference:
> >> http://www.antonis.de/qbebooks/gwbasman/read.html
> >>
> >>
> >>
> ------------------------------------------------------------------------------
> >> This SF.net email is sponsored by Windows:
> >>
> >> Build for Windows Store.
> >>
> >> http://p.sf.net/sfu/windows-dev2dev
> >> _______________________________________________
> >> Gambas-user mailing list
> >> Gambas-user at lists.sourceforge.net
> >> https://lists.sourceforge.net/lists/listinfo/gambas-user
> >>
> >
> ------------------------------------------------------------------------------
> > This SF.net email is sponsored by Windows:
> >
> > Build for Windows Store.
> >
> > http://p.sf.net/sfu/windows-dev2dev
> > _______________________________________________
> > Gambas-user mailing list
> > Gambas-user at lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/gambas-user
>
>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Windows:
>
> Build for Windows Store.
>
> http://p.sf.net/sfu/windows-dev2dev
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>


From gambas at ...1...  Fri Jun 28 00:33:38 2013
From: gambas at ...1... (=?ISO-8859-1?Q?Beno=EEt_Minisini?=)
Date: Fri, 28 Jun 2013 00:33:38 +0200
Subject: [Gambas-user] Error playing File Midi with libgstreamer - TER
In-Reply-To: <1372349249.56235.YahooMailBasic@...3054...>
References: <1372349249.56235.YahooMailBasic@...3054...>
Message-ID: <51CCBDC2.9020805@...1...>

Le 27/06/2013 18:07, Ru Vuott a ?crit :
> Hello Beno?t,
>
> I posted a question in GStreamer Mailing List about no-Playing Midi file with GStramer version 1.0.6.
>
> I had 2 answers, here:
> -----
> There's a "wildmidi" plugin in -plugins-bad that may help? There's also
> "timidity", but it hasn't been ported to GStreamer 1.0 yet (and I can't
> figure out how to install the dependencies, but it may be easy to port).
> -------
>
>
> --------
> It should work in git master or the 1.1.1 development release. There's a
> new fluidsynth plugin. If you make a sample file available we can test it.
>
> Also see:
> https://bugzilla.gnome.org/show_bug.cgi?id=696041
> https://bugzilla.gnome.org/show_bug.cgi?id=690892
>
> I think "Midi support" in the FAQ means something else (more like
> sending midi data through the pipeline etc.)
> ------
>
> Bye
> vuott
>

No plugin has the word "midi" in it on the plugin list provided by
http://gstreamer.freedesktop.org/documentation/

I think we must wait for the 1.2 version. :-/

-- 
Beno?t Minisini



From keithclark at ...2185...  Fri Jun 28 01:39:54 2013
From: keithclark at ...2185... (Keith Clark)
Date: Thu, 27 Jun 2013 19:39:54 -0400
Subject: [Gambas-user] read/data commands
In-Reply-To: <CAFJMe7Td8nxC4eaZ=MGSZvd12-2FO0Rq04r5_1zOcboZ2B0fUw@...627...>
References: <51CB5A84.9040400@...2185...> <20130627093433.GA790@...2774...>
	<51CC98B2.6030202@...2185...>
	<CAFJMe7T3djPL=tsaxdQsa+p0SfgT-MFg-4q4=_PwVcj82LRuiA@...627...>
	<51CCB49B.3080108@...2185...>
	<CAFJMe7Td8nxC4eaZ=MGSZvd12-2FO0Rq04r5_1zOcboZ2B0fUw@...627...>
Message-ID: <51CCCD4A.7010901@...2185...>

Jussi I believe you have it there, thanks.  I want to avoid a file for 
such a small, unchanging dataset.

Thanks,

Keith

On 13-06-27 06:22 PM, Jussi Lahtinen wrote:
> How about this?
>
>    Dim data As New Integer[][]
>    Dim v As New Integer[10, 10]
>
>    data.Add([1, 2, 3, 4, 5])
>    data.Add([6, 7, 8, 9, 10, 11])
>
>    For ii = 0 To data.Max
>      For jj = 0 To data[ii].Max
>        v[ii, jj] = data[ii][jj]
>      Next
>    Next
>
> Or maybe you want to read the data from file?
>
> Jussi
>
>
>
>
>
> On Fri, Jun 28, 2013 at 12:54 AM, Keith Clark <keithclark at ...2185...>wrote:
>
>> No, the data was just an example.  What if it were to be 255 unrelated
>> values?
>>
>> Did nobody else use BASIC from the 80s?
>>
>> Read/Data statments.....
>>
>> On 13-06-27 05:48 PM, Jussi Lahtinen wrote:
>>> I don't quite understand usage of data...
>>>
>>> Will this do what you want?
>>>
>>> Dim data As Integer[] = [1, 2, 3, 4, 5, 1, 2, 3, 4, 5]
>>> Dim v As New Integer[]
>>>
>>> v = data.Copy()
>>>
>>>
>>> Or this:
>>>
>>> Dim ii As Integer, jj As Integer
>>> Dim data As New Integer[5, 5]
>>>
>>> For ii = 0 To 4
>>>     For jj = 0 To 4
>>>       data[ii, jj] = jj + 1
>>>     Next
>>> Next
>>>
>>>
>>> Jussi
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> On Thu, Jun 27, 2013 at 10:55 PM, Keith Clark <
>> keithclark at ...2185...>wrote:
>>>> On 13-06-27 05:34 AM, Tobias Boege wrote:
>>>>> On Wed, 26 Jun 2013, Keith Clark wrote:
>>>>>> Does Gambas support read/data commands like the following for loading
>> a
>>>>>> simple array with fixed values?
>>>>>>
>>>>>> for t=0 to 4
>>>>>>         for x = 0 to 4
>>>>>>             read v(t,x)
>>>>>>         next x
>>>>>> next t
>>>>>>
>>>>>> data 1,2,3,4,5,1,2,3,4,5,1,2,3,4,5......
>>>>>>
>>>>>> Maybe I'm just not finding it?
>>>>>>
>>>>> I don't know what you want to do, actually, and your snippet does not
>>>>> resemble Gambas at all... Maybe you want to access elements of a 2D
>> array
>>>>> where t is the row and x is the column? So if v is an Integer[][], then
>>>> you
>>>>> need to do:
>>>>>
>>>>> For t = 0 To 4
>>>>>      For x = 0 To 4
>>>>>        Print v[t][x]
>>>>>      Next
>>>>> Next
>>>>>
>>>>> Regards,
>>>>> Tobi
>>>>>
>>>>>
>>>> Yeah, I posted that question rather quickly.  I want to fill an array
>>>> with a very simple, fixed dataset that will never change.  The code I
>>>> gave above is from an old dialect, but really just the curved brackets
>>>> should have been square.
>>>>
>>>> for t=0 to 4
>>>>         for x = 0 to 4
>>>>             read v[t,x]
>>>>         next x
>>>> next t
>>>>
>>>> data 1,2,3,4,5,1,2,3,4,5,1,2,3,4,5......
>>>>
>>>> Would read into the array v the data in the 'data' statement
>>>>
>>>> v[0,0]=1
>>>> v[0,1]=2
>>>> and so on.
>>>>
>>>> For reference:
>>>> http://www.antonis.de/qbebooks/gwbasman/read.html
>>>>
>>>>
>>>>
>> ------------------------------------------------------------------------------
>>>> This SF.net email is sponsored by Windows:
>>>>
>>>> Build for Windows Store.
>>>>
>>>> http://p.sf.net/sfu/windows-dev2dev
>>>> _______________________________________________
>>>> Gambas-user mailing list
>>>> Gambas-user at lists.sourceforge.net
>>>> https://lists.sourceforge.net/lists/listinfo/gambas-user
>>>>
>> ------------------------------------------------------------------------------
>>> This SF.net email is sponsored by Windows:
>>>
>>> Build for Windows Store.
>>>
>>> http://p.sf.net/sfu/windows-dev2dev
>>> _______________________________________________
>>> Gambas-user mailing list
>>> Gambas-user at lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/gambas-user
>>
>> ------------------------------------------------------------------------------
>> This SF.net email is sponsored by Windows:
>>
>> Build for Windows Store.
>>
>> http://p.sf.net/sfu/windows-dev2dev
>> _______________________________________________
>> Gambas-user mailing list
>> Gambas-user at lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/gambas-user
>>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Windows:
>
> Build for Windows Store.
>
> http://p.sf.net/sfu/windows-dev2dev
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user



From Gambas at ...1950...  Fri Jun 28 12:23:31 2013
From: Gambas at ...1950... (Caveat)
Date: Fri, 28 Jun 2013 12:23:31 +0200
Subject: [Gambas-user] read/data commands
In-Reply-To: <51CCB49B.3080108@...2185...>
References: <51CB5A84.9040400@...2185...> <20130627093433.GA790@...2774...>
	<51CC98B2.6030202@...2185...>
	<CAFJMe7T3djPL=tsaxdQsa+p0SfgT-MFg-4q4=_PwVcj82LRuiA@...627...>
	<51CCB49B.3080108@...2185...>
Message-ID: <51CD6423.2000103@...1950...>

Think the rest of the list are pretending to be younger than they are!

Of course I remember read/data statements, it was quite a popular way of 
getting a little (and sometimes not so little!) snippet of machine code 
into a basic program.

I still have my Spectrum 48k, my ZX81, and my ZX80 :-D

Kind regards,
Caveat

On 27/06/13 23:54, Keith Clark wrote:
> No, the data was just an example.  What if it were to be 255 unrelated
> values?
>
> Did nobody else use BASIC from the 80s?
>
> Read/Data statments.....
>
> On 13-06-27 05:48 PM, Jussi Lahtinen wrote:
>> I don't quite understand usage of data...
>>
>> Will this do what you want?
>>
>> Dim data As Integer[] = [1, 2, 3, 4, 5, 1, 2, 3, 4, 5]
>> Dim v As New Integer[]
>>
>> v = data.Copy()
>>
>>
>> Or this:
>>
>> Dim ii As Integer, jj As Integer
>> Dim data As New Integer[5, 5]
>>
>> For ii = 0 To 4
>>     For jj = 0 To 4
>>       data[ii, jj] = jj + 1
>>     Next
>> Next
>>
>>
>> Jussi
>>
>>
>>
>>
>>
>>
>>
>>
>> On Thu, Jun 27, 2013 at 10:55 PM, Keith Clark <keithclark at ...2185...>wrote:
>>
>>> On 13-06-27 05:34 AM, Tobias Boege wrote:
>>>> On Wed, 26 Jun 2013, Keith Clark wrote:
>>>>> Does Gambas support read/data commands like the following for loading a
>>>>> simple array with fixed values?
>>>>>
>>>>> for t=0 to 4
>>>>>         for x = 0 to 4
>>>>>             read v(t,x)
>>>>>         next x
>>>>> next t
>>>>>
>>>>> data 1,2,3,4,5,1,2,3,4,5,1,2,3,4,5......
>>>>>
>>>>> Maybe I'm just not finding it?
>>>>>
>>>> I don't know what you want to do, actually, and your snippet does not
>>>> resemble Gambas at all... Maybe you want to access elements of a 2D array
>>>> where t is the row and x is the column? So if v is an Integer[][], then
>>> you
>>>> need to do:
>>>>
>>>> For t = 0 To 4
>>>>      For x = 0 To 4
>>>>        Print v[t][x]
>>>>      Next
>>>> Next
>>>>
>>>> Regards,
>>>> Tobi
>>>>
>>>>
>>> Yeah, I posted that question rather quickly.  I want to fill an array
>>> with a very simple, fixed dataset that will never change.  The code I
>>> gave above is from an old dialect, but really just the curved brackets
>>> should have been square.
>>>
>>> for t=0 to 4
>>>         for x = 0 to 4
>>>             read v[t,x]
>>>         next x
>>> next t
>>>
>>> data 1,2,3,4,5,1,2,3,4,5,1,2,3,4,5......
>>>
>>> Would read into the array v the data in the 'data' statement
>>>
>>> v[0,0]=1
>>> v[0,1]=2
>>> and so on.
>>>
>>> For reference:
>>> http://www.antonis.de/qbebooks/gwbasman/read.html
>>>
>>>
>>> ------------------------------------------------------------------------------
>>> This SF.net email is sponsored by Windows:
>>>
>>> Build for Windows Store.
>>>
>>> http://p.sf.net/sfu/windows-dev2dev
>>> _______________________________________________
>>> Gambas-user mailing list
>>> Gambas-user at lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/gambas-user
>>>
>> ------------------------------------------------------------------------------
>> This SF.net email is sponsored by Windows:
>>
>> Build for Windows Store.
>>
>> http://p.sf.net/sfu/windows-dev2dev
>> _______________________________________________
>> Gambas-user mailing list
>> Gambas-user at lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/gambas-user
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Windows:
>
> Build for Windows Store.
>
> http://p.sf.net/sfu/windows-dev2dev
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>




From jussi.lahtinen at ...626...  Fri Jun 28 12:37:37 2013
From: jussi.lahtinen at ...626... (Jussi Lahtinen)
Date: Fri, 28 Jun 2013 13:37:37 +0300
Subject: [Gambas-user] read/data commands
In-Reply-To: <51CD6423.2000103@...1950...>
References: <51CB5A84.9040400@...2185...> <20130627093433.GA790@...2774...>
	<51CC98B2.6030202@...2185...>
	<CAFJMe7T3djPL=tsaxdQsa+p0SfgT-MFg-4q4=_PwVcj82LRuiA@...627...>
	<51CCB49B.3080108@...2185...>
	<51CD6423.2000103@...1950...>
Message-ID: <CAFJMe7TTZdb-JmbSg-bYWaQgNK_tyiB41+NFXA_qpOBkhKC4FA@...627...>

I remember read/data statements, but I never used them.
There is inline assembler in C...

Jussi


On Fri, Jun 28, 2013 at 1:23 PM, Caveat <Gambas at ...1950...> wrote:

> Think the rest of the list are pretending to be younger than they are!
>
> Of course I remember read/data statements, it was quite a popular way of
> getting a little (and sometimes not so little!) snippet of machine code
> into a basic program.
>
> I still have my Spectrum 48k, my ZX81, and my ZX80 :-D
>
> Kind regards,
> Caveat
>
> On 27/06/13 23:54, Keith Clark wrote:
> > No, the data was just an example.  What if it were to be 255 unrelated
> > values?
> >
> > Did nobody else use BASIC from the 80s?
> >
> > Read/Data statments.....
> >
> > On 13-06-27 05:48 PM, Jussi Lahtinen wrote:
> >> I don't quite understand usage of data...
> >>
> >> Will this do what you want?
> >>
> >> Dim data As Integer[] = [1, 2, 3, 4, 5, 1, 2, 3, 4, 5]
> >> Dim v As New Integer[]
> >>
> >> v = data.Copy()
> >>
> >>
> >> Or this:
> >>
> >> Dim ii As Integer, jj As Integer
> >> Dim data As New Integer[5, 5]
> >>
> >> For ii = 0 To 4
> >>     For jj = 0 To 4
> >>       data[ii, jj] = jj + 1
> >>     Next
> >> Next
> >>
> >>
> >> Jussi
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> On Thu, Jun 27, 2013 at 10:55 PM, Keith Clark <
> keithclark at ...2185...>wrote:
> >>
> >>> On 13-06-27 05:34 AM, Tobias Boege wrote:
> >>>> On Wed, 26 Jun 2013, Keith Clark wrote:
> >>>>> Does Gambas support read/data commands like the following for
> loading a
> >>>>> simple array with fixed values?
> >>>>>
> >>>>> for t=0 to 4
> >>>>>         for x = 0 to 4
> >>>>>             read v(t,x)
> >>>>>         next x
> >>>>> next t
> >>>>>
> >>>>> data 1,2,3,4,5,1,2,3,4,5,1,2,3,4,5......
> >>>>>
> >>>>> Maybe I'm just not finding it?
> >>>>>
> >>>> I don't know what you want to do, actually, and your snippet does not
> >>>> resemble Gambas at all... Maybe you want to access elements of a 2D
> array
> >>>> where t is the row and x is the column? So if v is an Integer[][],
> then
> >>> you
> >>>> need to do:
> >>>>
> >>>> For t = 0 To 4
> >>>>      For x = 0 To 4
> >>>>        Print v[t][x]
> >>>>      Next
> >>>> Next
> >>>>
> >>>> Regards,
> >>>> Tobi
> >>>>
> >>>>
> >>> Yeah, I posted that question rather quickly.  I want to fill an array
> >>> with a very simple, fixed dataset that will never change.  The code I
> >>> gave above is from an old dialect, but really just the curved brackets
> >>> should have been square.
> >>>
> >>> for t=0 to 4
> >>>         for x = 0 to 4
> >>>             read v[t,x]
> >>>         next x
> >>> next t
> >>>
> >>> data 1,2,3,4,5,1,2,3,4,5,1,2,3,4,5......
> >>>
> >>> Would read into the array v the data in the 'data' statement
> >>>
> >>> v[0,0]=1
> >>> v[0,1]=2
> >>> and so on.
> >>>
> >>> For reference:
> >>> http://www.antonis.de/qbebooks/gwbasman/read.html
> >>>
> >>>
> >>>
> ------------------------------------------------------------------------------
> >>> This SF.net email is sponsored by Windows:
> >>>
> >>> Build for Windows Store.
> >>>
> >>> http://p.sf.net/sfu/windows-dev2dev
> >>> _______________________________________________
> >>> Gambas-user mailing list
> >>> Gambas-user at lists.sourceforge.net
> >>> https://lists.sourceforge.net/lists/listinfo/gambas-user
> >>>
> >>
> ------------------------------------------------------------------------------
> >> This SF.net email is sponsored by Windows:
> >>
> >> Build for Windows Store.
> >>
> >> http://p.sf.net/sfu/windows-dev2dev
> >> _______________________________________________
> >> Gambas-user mailing list
> >> Gambas-user at lists.sourceforge.net
> >> https://lists.sourceforge.net/lists/listinfo/gambas-user
> >
> ------------------------------------------------------------------------------
> > This SF.net email is sponsored by Windows:
> >
> > Build for Windows Store.
> >
> > http://p.sf.net/sfu/windows-dev2dev
> > _______________________________________________
> > Gambas-user mailing list
> > Gambas-user at lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/gambas-user
> >
>
>
>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Windows:
>
> Build for Windows Store.
>
> http://p.sf.net/sfu/windows-dev2dev
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>


From alberto.kavan at ...626...  Fri Jun 28 12:54:00 2013
From: alberto.kavan at ...626... (Alberto Caballero)
Date: Fri, 28 Jun 2013 12:54:00 +0200
Subject: [Gambas-user] Multiple charts using gb.chart
In-Reply-To: <CAFkCsL4ZNj4w_7Y2A_qtBSxKJh6sHcjj3_dVG5_wUXM=B_B5zw@...627...>
References: <CAJo4JMbYuMHXWORQPO7StPWScXziWjpHm_+sumvLB_tGChOu5g@...627...>
	<CAFkCsL4ZNj4w_7Y2A_qtBSxKJh6sHcjj3_dVG5_wUXM=B_B5zw@...627...>
Message-ID: <CAJo4JMaFiMo1gbRR0rfh=eq3cNJ2SfdBoQ7KyQ_rN=SQNPs8qA@...627...>

Hi Fabien,

Thanks for your support.

Here you have the piece of code that manages the graph. For a new graph at
a new DrawingArea, should I declare a new Chart variable? I think this did
not work for me.

Private Sub GenGraficaCaudales()

  Dim i As Integer
  Dim msg As String
  Dim titles As New String[365]
  Dim CaudalesArray As New Float[365]

  For i = 0 To 364
    msg = Str$(i)
    titles[i] = msg
  Next

  CaudalesArray = pProyecto.GetCaudalesArray()
  ChartCaudales.Headers.Values = titles
  ChartCaudales.CountDataSets = 1

  ChartCaudales[0].Text = "Caudales"
  ChartCaudales[0].Values = CaudalesArray

  ChartCaudales.Style = ChartStyle.Custom
  ChartCaudales.Colors.values = [Color.blue, Color.Yellow]
  ChartCaudales.Legend.Visible = True
  ChartCaudales.Legend.Title = "Leyenda"

  'Titulo de la Gr?fica
  ChartCaudales.Title.Text = "Curva de Caudales Clasificados"

  ChartCaudales.XAxe.Step = 10
  ChartCaudales.YAxe.MinValue = 0
  ChartCaudales.YAxe.MaxValue = 15
  ChartCaudales.Proportionnal = True

  'Tipo de Gr?fica
  ChartCaudales.Type = ChartType.Lines
End

Public Sub DrawingArea1_Draw()

  If (DrawOk = True) Then
    ChartCaudales.Width = DrawingArea1.ClientHeight - 50
    ChartCaudales.Height = DrawingArea1.ClientWidth - 50
    ChartCaudales.Resize(880, 450)
    ChartCaudales.Draw 'Muestra la Grafica
  Endif


End


2013/6/27 Fabien Bodard <gambas.fr at ...626...>

> can you send me your project or a part of it that show the problem ?
>
>
> 2013/6/27 Alberto Caballero <alberto.kavan at ...626...>
>
> > Hi all,
> >
> > I am trying to show multiple charts inside a TabView. I managed to show
> > only one chart. I only get compilation errors or the new chart is not
> > displayed. I tried to find something to help me in the internet, and even
> > in this mailing list, but I was unable to find anything.
> >
> > Would you provide me any reference or an example to have a look?
> >
> > Thanks in advance,
> >
> > Alberto
> >
> >
> ------------------------------------------------------------------------------
> > This SF.net email is sponsored by Windows:
> >
> > Build for Windows Store.
> >
> > http://p.sf.net/sfu/windows-dev2dev
> > _______________________________________________
> > Gambas-user mailing list
> > Gambas-user at lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/gambas-user
> >
>
>
>
> --
> Fabien Bodard
>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Windows:
>
> Build for Windows Store.
>
> http://p.sf.net/sfu/windows-dev2dev
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>


From gambas.fr at ...626...  Fri Jun 28 13:06:19 2013
From: gambas.fr at ...626... (Fabien Bodard)
Date: Fri, 28 Jun 2013 13:06:19 +0200
Subject: [Gambas-user] Multiple charts using gb.chart
In-Reply-To: <CAJo4JMaFiMo1gbRR0rfh=eq3cNJ2SfdBoQ7KyQ_rN=SQNPs8qA@...627...>
References: <CAJo4JMbYuMHXWORQPO7StPWScXziWjpHm_+sumvLB_tGChOu5g@...627...>
	<CAFkCsL4ZNj4w_7Y2A_qtBSxKJh6sHcjj3_dVG5_wUXM=B_B5zw@...627...>
	<CAJo4JMaFiMo1gbRR0rfh=eq3cNJ2SfdBoQ7KyQ_rN=SQNPs8qA@...627...>
Message-ID: <CAFkCsL6xQ9nvynoWw-4jm8890RKahunz1v8SHcB1U3eAVzjH2w@...627...>

I think I don'treally understand what you want to do ...

One tabstrip ... Multiple tabs and one chart object with different set of
data that change depend on the selected tab ?
Le 28 juin 2013 12:54, "Alberto Caballero" <alberto.kavan at ...626...> a
?crit :

> Hi Fabien,
>
> Thanks for your support.
>
> Here you have the piece of code that manages the graph. For a new graph at
> a new DrawingArea, should I declare a new Chart variable? I think this did
> not work for me.
>
> Private Sub GenGraficaCaudales()
>
>   Dim i As Integer
>   Dim msg As String
>   Dim titles As New String[365]
>   Dim CaudalesArray As New Float[365]
>
>   For i = 0 To 364
>     msg = Str$(i)
>     titles[i] = msg
>   Next
>
>   CaudalesArray = pProyecto.GetCaudalesArray()
>   ChartCaudales.Headers.Values = titles
>   ChartCaudales.CountDataSets = 1
>
>   ChartCaudales[0].Text = "Caudales"
>   ChartCaudales[0].Values = CaudalesArray
>
>   ChartCaudales.Style = ChartStyle.Custom
>   ChartCaudales.Colors.values = [Color.blue, Color.Yellow]
>   ChartCaudales.Legend.Visible = True
>   ChartCaudales.Legend.Title = "Leyenda"
>
>   'Titulo de la Gr?fica
>   ChartCaudales.Title.Text = "Curva de Caudales Clasificados"
>
>   ChartCaudales.XAxe.Step = 10
>   ChartCaudales.YAxe.MinValue = 0
>   ChartCaudales.YAxe.MaxValue = 15
>   ChartCaudales.Proportionnal = True
>
>   'Tipo de Gr?fica
>   ChartCaudales.Type = ChartType.Lines
> End
>
> Public Sub DrawingArea1_Draw()
>
>   If (DrawOk = True) Then
>     ChartCaudales.Width = DrawingArea1.ClientHeight - 50
>     ChartCaudales.Height = DrawingArea1.ClientWidth - 50
>     ChartCaudales.Resize(880, 450)
>     ChartCaudales.Draw 'Muestra la Grafica
>   Endif
>
>
> End
>
>
> 2013/6/27 Fabien Bodard <gambas.fr at ...626...>
>
> > can you send me your project or a part of it that show the problem ?
> >
> >
> > 2013/6/27 Alberto Caballero <alberto.kavan at ...626...>
> >
> > > Hi all,
> > >
> > > I am trying to show multiple charts inside a TabView. I managed to show
> > > only one chart. I only get compilation errors or the new chart is not
> > > displayed. I tried to find something to help me in the internet, and
> even
> > > in this mailing list, but I was unable to find anything.
> > >
> > > Would you provide me any reference or an example to have a look?
> > >
> > > Thanks in advance,
> > >
> > > Alberto
> > >
> > >
> >
> ------------------------------------------------------------------------------
> > > This SF.net email is sponsored by Windows:
> > >
> > > Build for Windows Store.
> > >
> > > http://p.sf.net/sfu/windows-dev2dev
> > > _______________________________________________
> > > Gambas-user mailing list
> > > Gambas-user at lists.sourceforge.net
> > > https://lists.sourceforge.net/lists/listinfo/gambas-user
> > >
> >
> >
> >
> > --
> > Fabien Bodard
> >
> >
> ------------------------------------------------------------------------------
> > This SF.net email is sponsored by Windows:
> >
> > Build for Windows Store.
> >
> > http://p.sf.net/sfu/windows-dev2dev
> > _______________________________________________
> > Gambas-user mailing list
> > Gambas-user at lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/gambas-user
> >
>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Windows:
>
> Build for Windows Store.
>
> http://p.sf.net/sfu/windows-dev2dev
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>


From gambas.fr at ...626...  Fri Jun 28 13:09:04 2013
From: gambas.fr at ...626... (Fabien Bodard)
Date: Fri, 28 Jun 2013 13:09:04 +0200
Subject: [Gambas-user] Multiple charts using gb.chart
In-Reply-To: <CAFkCsL6xQ9nvynoWw-4jm8890RKahunz1v8SHcB1U3eAVzjH2w@...627...>
References: <CAJo4JMbYuMHXWORQPO7StPWScXziWjpHm_+sumvLB_tGChOu5g@...627...>
	<CAFkCsL4ZNj4w_7Y2A_qtBSxKJh6sHcjj3_dVG5_wUXM=B_B5zw@...627...>
	<CAJo4JMaFiMo1gbRR0rfh=eq3cNJ2SfdBoQ7KyQ_rN=SQNPs8qA@...627...>
	<CAFkCsL6xQ9nvynoWw-4jm8890RKahunz1v8SHcB1U3eAVzjH2w@...627...>
Message-ID: <CAFkCsL7vWfa32pkbvRzr5mDrjQ_JrViFRqa3OQNvj2HMy9K_5Q@...627...>

Never resize the drawing area in its draw event !!!

Use the form resize event or better learn how to use gambas arrangement
properties. The last allow to do what you want without any code line.
Le 28 juin 2013 13:06, "Fabien Bodard" <gambas.fr at ...626...> a ?crit :

> I think I don'treally understand what you want to do ...
>
> One tabstrip ... Multiple tabs and one chart object with different set of
> data that change depend on the selected tab ?
> Le 28 juin 2013 12:54, "Alberto Caballero" <alberto.kavan at ...626...> a
> ?crit :
>
>> Hi Fabien,
>>
>> Thanks for your support.
>>
>> Here you have the piece of code that manages the graph. For a new graph at
>> a new DrawingArea, should I declare a new Chart variable? I think this did
>> not work for me.
>>
>> Private Sub GenGraficaCaudales()
>>
>>   Dim i As Integer
>>   Dim msg As String
>>   Dim titles As New String[365]
>>   Dim CaudalesArray As New Float[365]
>>
>>   For i = 0 To 364
>>     msg = Str$(i)
>>     titles[i] = msg
>>   Next
>>
>>   CaudalesArray = pProyecto.GetCaudalesArray()
>>   ChartCaudales.Headers.Values = titles
>>   ChartCaudales.CountDataSets = 1
>>
>>   ChartCaudales[0].Text = "Caudales"
>>   ChartCaudales[0].Values = CaudalesArray
>>
>>   ChartCaudales.Style = ChartStyle.Custom
>>   ChartCaudales.Colors.values = [Color.blue, Color.Yellow]
>>   ChartCaudales.Legend.Visible = True
>>   ChartCaudales.Legend.Title = "Leyenda"
>>
>>   'Titulo de la Gr?fica
>>   ChartCaudales.Title.Text = "Curva de Caudales Clasificados"
>>
>>   ChartCaudales.XAxe.Step = 10
>>   ChartCaudales.YAxe.MinValue = 0
>>   ChartCaudales.YAxe.MaxValue = 15
>>   ChartCaudales.Proportionnal = True
>>
>>   'Tipo de Gr?fica
>>   ChartCaudales.Type = ChartType.Lines
>> End
>>
>> Public Sub DrawingArea1_Draw()
>>
>>   If (DrawOk = True) Then
>>     ChartCaudales.Width = DrawingArea1.ClientHeight - 50
>>     ChartCaudales.Height = DrawingArea1.ClientWidth - 50
>>     ChartCaudales.Resize(880, 450)
>>     ChartCaudales.Draw 'Muestra la Grafica
>>   Endif
>>
>>
>> End
>>
>>
>> 2013/6/27 Fabien Bodard <gambas.fr at ...626...>
>>
>> > can you send me your project or a part of it that show the problem ?
>> >
>> >
>> > 2013/6/27 Alberto Caballero <alberto.kavan at ...626...>
>> >
>> > > Hi all,
>> > >
>> > > I am trying to show multiple charts inside a TabView. I managed to
>> show
>> > > only one chart. I only get compilation errors or the new chart is not
>> > > displayed. I tried to find something to help me in the internet, and
>> even
>> > > in this mailing list, but I was unable to find anything.
>> > >
>> > > Would you provide me any reference or an example to have a look?
>> > >
>> > > Thanks in advance,
>> > >
>> > > Alberto
>> > >
>> > >
>> >
>> ------------------------------------------------------------------------------
>> > > This SF.net email is sponsored by Windows:
>> > >
>> > > Build for Windows Store.
>> > >
>> > > http://p.sf.net/sfu/windows-dev2dev
>> > > _______________________________________________
>> > > Gambas-user mailing list
>> > > Gambas-user at lists.sourceforge.net
>> > > https://lists.sourceforge.net/lists/listinfo/gambas-user
>> > >
>> >
>> >
>> >
>> > --
>> > Fabien Bodard
>> >
>> >
>> ------------------------------------------------------------------------------
>> > This SF.net email is sponsored by Windows:
>> >
>> > Build for Windows Store.
>> >
>> > http://p.sf.net/sfu/windows-dev2dev
>> > _______________________________________________
>> > Gambas-user mailing list
>> > Gambas-user at lists.sourceforge.net
>> > https://lists.sourceforge.net/lists/listinfo/gambas-user
>> >
>>
>> ------------------------------------------------------------------------------
>> This SF.net email is sponsored by Windows:
>>
>> Build for Windows Store.
>>
>> http://p.sf.net/sfu/windows-dev2dev
>> _______________________________________________
>> Gambas-user mailing list
>> Gambas-user at lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/gambas-user
>>
>


From alberto.kavan at ...626...  Fri Jun 28 13:13:39 2013
From: alberto.kavan at ...626... (Alberto Caballero)
Date: Fri, 28 Jun 2013 13:13:39 +0200
Subject: [Gambas-user] Multiple charts using gb.chart
In-Reply-To: <CAFkCsL7vWfa32pkbvRzr5mDrjQ_JrViFRqa3OQNvj2HMy9K_5Q@...627...>
References: <CAJo4JMbYuMHXWORQPO7StPWScXziWjpHm_+sumvLB_tGChOu5g@...627...>
	<CAFkCsL4ZNj4w_7Y2A_qtBSxKJh6sHcjj3_dVG5_wUXM=B_B5zw@...627...>
	<CAJo4JMaFiMo1gbRR0rfh=eq3cNJ2SfdBoQ7KyQ_rN=SQNPs8qA@...627...>
	<CAFkCsL6xQ9nvynoWw-4jm8890RKahunz1v8SHcB1U3eAVzjH2w@...627...>
	<CAFkCsL7vWfa32pkbvRzr5mDrjQ_JrViFRqa3OQNvj2HMy9K_5Q@...627...>
Message-ID: <CAJo4JMavhb+ZozTzBLkAYeYwD7OeZs7sufARTcBRxFqowK2DBw@...627...>

Ok Fabien,

I will try all of this. What I want to do is to show different charts
inside different tabs. Should I declare different Chart variables for each
chart?

I will update you ASAP.


2013/6/28 Fabien Bodard <gambas.fr at ...626...>

> Never resize the drawing area in its draw event !!!
>
> Use the form resize event or better learn how to use gambas arrangement
> properties. The last allow to do what you want without any code line.
> Le 28 juin 2013 13:06, "Fabien Bodard" <gambas.fr at ...626...> a ?crit :
>
> > I think I don'treally understand what you want to do ...
> >
> > One tabstrip ... Multiple tabs and one chart object with different set of
> > data that change depend on the selected tab ?
> > Le 28 juin 2013 12:54, "Alberto Caballero" <alberto.kavan at ...626...> a
> > ?crit :
> >
> >> Hi Fabien,
> >>
> >> Thanks for your support.
> >>
> >> Here you have the piece of code that manages the graph. For a new graph
> at
> >> a new DrawingArea, should I declare a new Chart variable? I think this
> did
> >> not work for me.
> >>
> >> Private Sub GenGraficaCaudales()
> >>
> >>   Dim i As Integer
> >>   Dim msg As String
> >>   Dim titles As New String[365]
> >>   Dim CaudalesArray As New Float[365]
> >>
> >>   For i = 0 To 364
> >>     msg = Str$(i)
> >>     titles[i] = msg
> >>   Next
> >>
> >>   CaudalesArray = pProyecto.GetCaudalesArray()
> >>   ChartCaudales.Headers.Values = titles
> >>   ChartCaudales.CountDataSets = 1
> >>
> >>   ChartCaudales[0].Text = "Caudales"
> >>   ChartCaudales[0].Values = CaudalesArray
> >>
> >>   ChartCaudales.Style = ChartStyle.Custom
> >>   ChartCaudales.Colors.values = [Color.blue, Color.Yellow]
> >>   ChartCaudales.Legend.Visible = True
> >>   ChartCaudales.Legend.Title = "Leyenda"
> >>
> >>   'Titulo de la Gr?fica
> >>   ChartCaudales.Title.Text = "Curva de Caudales Clasificados"
> >>
> >>   ChartCaudales.XAxe.Step = 10
> >>   ChartCaudales.YAxe.MinValue = 0
> >>   ChartCaudales.YAxe.MaxValue = 15
> >>   ChartCaudales.Proportionnal = True
> >>
> >>   'Tipo de Gr?fica
> >>   ChartCaudales.Type = ChartType.Lines
> >> End
> >>
> >> Public Sub DrawingArea1_Draw()
> >>
> >>   If (DrawOk = True) Then
> >>     ChartCaudales.Width = DrawingArea1.ClientHeight - 50
> >>     ChartCaudales.Height = DrawingArea1.ClientWidth - 50
> >>     ChartCaudales.Resize(880, 450)
> >>     ChartCaudales.Draw 'Muestra la Grafica
> >>   Endif
> >>
> >>
> >> End
> >>
> >>
> >> 2013/6/27 Fabien Bodard <gambas.fr at ...626...>
> >>
> >> > can you send me your project or a part of it that show the problem ?
> >> >
> >> >
> >> > 2013/6/27 Alberto Caballero <alberto.kavan at ...626...>
> >> >
> >> > > Hi all,
> >> > >
> >> > > I am trying to show multiple charts inside a TabView. I managed to
> >> show
> >> > > only one chart. I only get compilation errors or the new chart is
> not
> >> > > displayed. I tried to find something to help me in the internet, and
> >> even
> >> > > in this mailing list, but I was unable to find anything.
> >> > >
> >> > > Would you provide me any reference or an example to have a look?
> >> > >
> >> > > Thanks in advance,
> >> > >
> >> > > Alberto
> >> > >
> >> > >
> >> >
> >>
> ------------------------------------------------------------------------------
> >> > > This SF.net email is sponsored by Windows:
> >> > >
> >> > > Build for Windows Store.
> >> > >
> >> > > http://p.sf.net/sfu/windows-dev2dev
> >> > > _______________________________________________
> >> > > Gambas-user mailing list
> >> > > Gambas-user at lists.sourceforge.net
> >> > > https://lists.sourceforge.net/lists/listinfo/gambas-user
> >> > >
> >> >
> >> >
> >> >
> >> > --
> >> > Fabien Bodard
> >> >
> >> >
> >>
> ------------------------------------------------------------------------------
> >> > This SF.net email is sponsored by Windows:
> >> >
> >> > Build for Windows Store.
> >> >
> >> > http://p.sf.net/sfu/windows-dev2dev
> >> > _______________________________________________
> >> > Gambas-user mailing list
> >> > Gambas-user at lists.sourceforge.net
> >> > https://lists.sourceforge.net/lists/listinfo/gambas-user
> >> >
> >>
> >>
> ------------------------------------------------------------------------------
> >> This SF.net email is sponsored by Windows:
> >>
> >> Build for Windows Store.
> >>
> >> http://p.sf.net/sfu/windows-dev2dev
> >> _______________________________________________
> >> Gambas-user mailing list
> >> Gambas-user at lists.sourceforge.net
> >> https://lists.sourceforge.net/lists/listinfo/gambas-user
> >>
> >
>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Windows:
>
> Build for Windows Store.
>
> http://p.sf.net/sfu/windows-dev2dev
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>


From gambas.fr at ...626...  Fri Jun 28 13:21:20 2013
From: gambas.fr at ...626... (Fabien Bodard)
Date: Fri, 28 Jun 2013 13:21:20 +0200
Subject: [Gambas-user] read/data commands
In-Reply-To: <CAFJMe7TTZdb-JmbSg-bYWaQgNK_tyiB41+NFXA_qpOBkhKC4FA@...627...>
References: <51CB5A84.9040400@...2185...> <20130627093433.GA790@...2774...>
	<51CC98B2.6030202@...2185...>
	<CAFJMe7T3djPL=tsaxdQsa+p0SfgT-MFg-4q4=_PwVcj82LRuiA@...627...>
	<51CCB49B.3080108@...2185...>
	<51CD6423.2000103@...1950...>
	<CAFJMe7TTZdb-JmbSg-bYWaQgNK_tyiB41+NFXA_qpOBkhKC4FA@...627...>
Message-ID: <CAFkCsL4kfEA91SVEXiDG+yKKe2HURV-kBvtixi4D9eVgBRHHpQ@...627...>

In gambas
Dim grata as integer[][]=[[1,2,3,4][1,2,3,4][1,2,3,4][1,2,3,4]]


But also an internal file in gambas can be used

Dim a as integer[]=split(file.load("data"))

For I =3 to 3
For j = 0 to 3
  Adata[i][j]=a[I*j]
Next
Next

Or a structure via gb.setting

.. so many ways

But for a short sequence the first is for me the better
Le 28 juin 2013 12:38, "Jussi Lahtinen" <jussi.lahtinen at ...626...> a ?crit :

> I remember read/data statements, but I never used them.
> There is inline assembler in C...
>
> Jussi
>
>
> On Fri, Jun 28, 2013 at 1:23 PM, Caveat <Gambas at ...1950...> wrote:
>
> > Think the rest of the list are pretending to be younger than they are!
> >
> > Of course I remember read/data statements, it was quite a popular way of
> > getting a little (and sometimes not so little!) snippet of machine code
> > into a basic program.
> >
> > I still have my Spectrum 48k, my ZX81, and my ZX80 :-D
> >
> > Kind regards,
> > Caveat
> >
> > On 27/06/13 23:54, Keith Clark wrote:
> > > No, the data was just an example.  What if it were to be 255 unrelated
> > > values?
> > >
> > > Did nobody else use BASIC from the 80s?
> > >
> > > Read/Data statments.....
> > >
> > > On 13-06-27 05:48 PM, Jussi Lahtinen wrote:
> > >> I don't quite understand usage of data...
> > >>
> > >> Will this do what you want?
> > >>
> > >> Dim data As Integer[] = [1, 2, 3, 4, 5, 1, 2, 3, 4, 5]
> > >> Dim v As New Integer[]
> > >>
> > >> v = data.Copy()
> > >>
> > >>
> > >> Or this:
> > >>
> > >> Dim ii As Integer, jj As Integer
> > >> Dim data As New Integer[5, 5]
> > >>
> > >> For ii = 0 To 4
> > >>     For jj = 0 To 4
> > >>       data[ii, jj] = jj + 1
> > >>     Next
> > >> Next
> > >>
> > >>
> > >> Jussi
> > >>
> > >>
> > >>
> > >>
> > >>
> > >>
> > >>
> > >>
> > >> On Thu, Jun 27, 2013 at 10:55 PM, Keith Clark <
> > keithclark at ...2185...>wrote:
> > >>
> > >>> On 13-06-27 05:34 AM, Tobias Boege wrote:
> > >>>> On Wed, 26 Jun 2013, Keith Clark wrote:
> > >>>>> Does Gambas support read/data commands like the following for
> > loading a
> > >>>>> simple array with fixed values?
> > >>>>>
> > >>>>> for t=0 to 4
> > >>>>>         for x = 0 to 4
> > >>>>>             read v(t,x)
> > >>>>>         next x
> > >>>>> next t
> > >>>>>
> > >>>>> data 1,2,3,4,5,1,2,3,4,5,1,2,3,4,5......
> > >>>>>
> > >>>>> Maybe I'm just not finding it?
> > >>>>>
> > >>>> I don't know what you want to do, actually, and your snippet does
> not
> > >>>> resemble Gambas at all... Maybe you want to access elements of a 2D
> > array
> > >>>> where t is the row and x is the column? So if v is an Integer[][],
> > then
> > >>> you
> > >>>> need to do:
> > >>>>
> > >>>> For t = 0 To 4
> > >>>>      For x = 0 To 4
> > >>>>        Print v[t][x]
> > >>>>      Next
> > >>>> Next
> > >>>>
> > >>>> Regards,
> > >>>> Tobi
> > >>>>
> > >>>>
> > >>> Yeah, I posted that question rather quickly.  I want to fill an array
> > >>> with a very simple, fixed dataset that will never change.  The code I
> > >>> gave above is from an old dialect, but really just the curved
> brackets
> > >>> should have been square.
> > >>>
> > >>> for t=0 to 4
> > >>>         for x = 0 to 4
> > >>>             read v[t,x]
> > >>>         next x
> > >>> next t
> > >>>
> > >>> data 1,2,3,4,5,1,2,3,4,5,1,2,3,4,5......
> > >>>
> > >>> Would read into the array v the data in the 'data' statement
> > >>>
> > >>> v[0,0]=1
> > >>> v[0,1]=2
> > >>> and so on.
> > >>>
> > >>> For reference:
> > >>> http://www.antonis.de/qbebooks/gwbasman/read.html
> > >>>
> > >>>
> > >>>
> >
> ------------------------------------------------------------------------------
> > >>> This SF.net email is sponsored by Windows:
> > >>>
> > >>> Build for Windows Store.
> > >>>
> > >>> http://p.sf.net/sfu/windows-dev2dev
> > >>> _______________________________________________
> > >>> Gambas-user mailing list
> > >>> Gambas-user at lists.sourceforge.net
> > >>> https://lists.sourceforge.net/lists/listinfo/gambas-user
> > >>>
> > >>
> >
> ------------------------------------------------------------------------------
> > >> This SF.net email is sponsored by Windows:
> > >>
> > >> Build for Windows Store.
> > >>
> > >> http://p.sf.net/sfu/windows-dev2dev
> > >> _______________________________________________
> > >> Gambas-user mailing list
> > >> Gambas-user at lists.sourceforge.net
> > >> https://lists.sourceforge.net/lists/listinfo/gambas-user
> > >
> >
> ------------------------------------------------------------------------------
> > > This SF.net email is sponsored by Windows:
> > >
> > > Build for Windows Store.
> > >
> > > http://p.sf.net/sfu/windows-dev2dev
> > > _______________________________________________
> > > Gambas-user mailing list
> > > Gambas-user at lists.sourceforge.net
> > > https://lists.sourceforge.net/lists/listinfo/gambas-user
> > >
> >
> >
> >
> >
> ------------------------------------------------------------------------------
> > This SF.net email is sponsored by Windows:
> >
> > Build for Windows Store.
> >
> > http://p.sf.net/sfu/windows-dev2dev
> > _______________________________________________
> > Gambas-user mailing list
> > Gambas-user at lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/gambas-user
> >
>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Windows:
>
> Build for Windows Store.
>
> http://p.sf.net/sfu/windows-dev2dev
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>


From gambas.fr at ...626...  Fri Jun 28 13:22:48 2013
From: gambas.fr at ...626... (Fabien Bodard)
Date: Fri, 28 Jun 2013 13:22:48 +0200
Subject: [Gambas-user] Multiple charts using gb.chart
In-Reply-To: <CAJo4JMavhb+ZozTzBLkAYeYwD7OeZs7sufARTcBRxFqowK2DBw@...627...>
References: <CAJo4JMbYuMHXWORQPO7StPWScXziWjpHm_+sumvLB_tGChOu5g@...627...>
	<CAFkCsL4ZNj4w_7Y2A_qtBSxKJh6sHcjj3_dVG5_wUXM=B_B5zw@...627...>
	<CAJo4JMaFiMo1gbRR0rfh=eq3cNJ2SfdBoQ7KyQ_rN=SQNPs8qA@...627...>
	<CAFkCsL6xQ9nvynoWw-4jm8890RKahunz1v8SHcB1U3eAVzjH2w@...627...>
	<CAFkCsL7vWfa32pkbvRzr5mDrjQ_JrViFRqa3OQNvj2HMy9K_5Q@...627...>
	<CAJo4JMavhb+ZozTzBLkAYeYwD7OeZs7sufARTcBRxFqowK2DBw@...627...>
Message-ID: <CAFkCsL7m7sYobvLxyM91uMiaFpKqBf6PcU7HO4J0QSn68_=cRQ@...627...>

It depend... If all the chart are on the same style ... One chart object in
multiple drawing area pointing on one event handler

Group
Le 28 juin 2013 13:14, "Alberto Caballero" <alberto.kavan at ...626...> a
?crit :

> Ok Fabien,
>
> I will try all of this. What I want to do is to show different charts
> inside different tabs. Should I declare different Chart variables for each
> chart?
>
> I will update you ASAP.
>
>
> 2013/6/28 Fabien Bodard <gambas.fr at ...626...>
>
> > Never resize the drawing area in its draw event !!!
> >
> > Use the form resize event or better learn how to use gambas arrangement
> > properties. The last allow to do what you want without any code line.
> > Le 28 juin 2013 13:06, "Fabien Bodard" <gambas.fr at ...626...> a ?crit :
> >
> > > I think I don'treally understand what you want to do ...
> > >
> > > One tabstrip ... Multiple tabs and one chart object with different set
> of
> > > data that change depend on the selected tab ?
> > > Le 28 juin 2013 12:54, "Alberto Caballero" <alberto.kavan at ...626...> a
> > > ?crit :
> > >
> > >> Hi Fabien,
> > >>
> > >> Thanks for your support.
> > >>
> > >> Here you have the piece of code that manages the graph. For a new
> graph
> > at
> > >> a new DrawingArea, should I declare a new Chart variable? I think this
> > did
> > >> not work for me.
> > >>
> > >> Private Sub GenGraficaCaudales()
> > >>
> > >>   Dim i As Integer
> > >>   Dim msg As String
> > >>   Dim titles As New String[365]
> > >>   Dim CaudalesArray As New Float[365]
> > >>
> > >>   For i = 0 To 364
> > >>     msg = Str$(i)
> > >>     titles[i] = msg
> > >>   Next
> > >>
> > >>   CaudalesArray = pProyecto.GetCaudalesArray()
> > >>   ChartCaudales.Headers.Values = titles
> > >>   ChartCaudales.CountDataSets = 1
> > >>
> > >>   ChartCaudales[0].Text = "Caudales"
> > >>   ChartCaudales[0].Values = CaudalesArray
> > >>
> > >>   ChartCaudales.Style = ChartStyle.Custom
> > >>   ChartCaudales.Colors.values = [Color.blue, Color.Yellow]
> > >>   ChartCaudales.Legend.Visible = True
> > >>   ChartCaudales.Legend.Title = "Leyenda"
> > >>
> > >>   'Titulo de la Gr?fica
> > >>   ChartCaudales.Title.Text = "Curva de Caudales Clasificados"
> > >>
> > >>   ChartCaudales.XAxe.Step = 10
> > >>   ChartCaudales.YAxe.MinValue = 0
> > >>   ChartCaudales.YAxe.MaxValue = 15
> > >>   ChartCaudales.Proportionnal = True
> > >>
> > >>   'Tipo de Gr?fica
> > >>   ChartCaudales.Type = ChartType.Lines
> > >> End
> > >>
> > >> Public Sub DrawingArea1_Draw()
> > >>
> > >>   If (DrawOk = True) Then
> > >>     ChartCaudales.Width = DrawingArea1.ClientHeight - 50
> > >>     ChartCaudales.Height = DrawingArea1.ClientWidth - 50
> > >>     ChartCaudales.Resize(880, 450)
> > >>     ChartCaudales.Draw 'Muestra la Grafica
> > >>   Endif
> > >>
> > >>
> > >> End
> > >>
> > >>
> > >> 2013/6/27 Fabien Bodard <gambas.fr at ...626...>
> > >>
> > >> > can you send me your project or a part of it that show the problem ?
> > >> >
> > >> >
> > >> > 2013/6/27 Alberto Caballero <alberto.kavan at ...626...>
> > >> >
> > >> > > Hi all,
> > >> > >
> > >> > > I am trying to show multiple charts inside a TabView. I managed to
> > >> show
> > >> > > only one chart. I only get compilation errors or the new chart is
> > not
> > >> > > displayed. I tried to find something to help me in the internet,
> and
> > >> even
> > >> > > in this mailing list, but I was unable to find anything.
> > >> > >
> > >> > > Would you provide me any reference or an example to have a look?
> > >> > >
> > >> > > Thanks in advance,
> > >> > >
> > >> > > Alberto
> > >> > >
> > >> > >
> > >> >
> > >>
> >
> ------------------------------------------------------------------------------
> > >> > > This SF.net email is sponsored by Windows:
> > >> > >
> > >> > > Build for Windows Store.
> > >> > >
> > >> > > http://p.sf.net/sfu/windows-dev2dev
> > >> > > _______________________________________________
> > >> > > Gambas-user mailing list
> > >> > > Gambas-user at lists.sourceforge.net
> > >> > > https://lists.sourceforge.net/lists/listinfo/gambas-user
> > >> > >
> > >> >
> > >> >
> > >> >
> > >> > --
> > >> > Fabien Bodard
> > >> >
> > >> >
> > >>
> >
> ------------------------------------------------------------------------------
> > >> > This SF.net email is sponsored by Windows:
> > >> >
> > >> > Build for Windows Store.
> > >> >
> > >> > http://p.sf.net/sfu/windows-dev2dev
> > >> > _______________________________________________
> > >> > Gambas-user mailing list
> > >> > Gambas-user at lists.sourceforge.net
> > >> > https://lists.sourceforge.net/lists/listinfo/gambas-user
> > >> >
> > >>
> > >>
> >
> ------------------------------------------------------------------------------
> > >> This SF.net email is sponsored by Windows:
> > >>
> > >> Build for Windows Store.
> > >>
> > >> http://p.sf.net/sfu/windows-dev2dev
> > >> _______________________________________________
> > >> Gambas-user mailing list
> > >> Gambas-user at lists.sourceforge.net
> > >> https://lists.sourceforge.net/lists/listinfo/gambas-user
> > >>
> > >
> >
> >
> ------------------------------------------------------------------------------
> > This SF.net email is sponsored by Windows:
> >
> > Build for Windows Store.
> >
> > http://p.sf.net/sfu/windows-dev2dev
> > _______________________________________________
> > Gambas-user mailing list
> > Gambas-user at lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/gambas-user
> >
>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Windows:
>
> Build for Windows Store.
>
> http://p.sf.net/sfu/windows-dev2dev
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>


From dr.diesel at ...626...  Fri Jun 28 20:00:17 2013
From: dr.diesel at ...626... (dr.diesel)
Date: Fri, 28 Jun 2013 11:00:17 -0700 (PDT)
Subject: [Gambas-user] Help binding to /dev/usbtmc0?
In-Reply-To: <20130626074201.GA519@...2774...>
References: <1372198211969-42276.post@...3046...>
	<20130626074201.GA519@...2774...>
Message-ID: <1372442417901-42320.post@...3046...>

Thanks for the help.  That is basically what I've done, expect all I get:

"System error #110: Connection Timed out"

I get the same when I cat and echo, but I get the proper response then get
the error:

[root at ...2809... andy]# echo *IDN?>/dev/usbtmc0
[root at ...2809... andy]# cat /dev/usbtmc0 
Rigol Technologies,DSA815,DSA8A151449181,00.01.06.00.05
***10 second pause ****
cat: /dev/usbtmc0: Connection timed out
[root at ...2809... andy]# 

It appears that it is waiting for more, how to I read only what's there then
exit?

I've tried a simple Read #hDevice and a While not EOF:


Public hDevice As File 
Public sLine As String 


Public Sub Form_Open()
 hDevice = Open "/dev/usbtmc0" For Input Output Watch
End

Public Sub File_Read()
  Dim iByte As Byte

  'Read #hDevice, iByte
  'Print "Got one byte: "; iByte
  '
  While Not Eof(hDevice)
    Line Input #hDevice, sLine
    Print sLine
  Wend
End

Many thanks, any other suggestions?



--
View this message in context: http://gambas.8142.n7.nabble.com/Help-binding-to-dev-usbtmc0-tp42276p42320.html
Sent from the gambas-user mailing list archive at Nabble.com.



From gambas at ...2524...  Sat Jun 29 18:34:23 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Sat, 29 Jun 2013 16:34:23 +0000
Subject: [Gambas-user] Issue 438 in gambas: gb.xml.rpc sometimes doesn't
 parse data correctly due to incompleteness of received data
In-Reply-To: <4-6813199134517018827-16924913522877771443-gambas=googlecode.com@...2524...>
References: <4-6813199134517018827-16924913522877771443-gambas=googlecode.com@...2524...>
	<0-6813199134517018827-16924913522877771443-gambas=googlecode.com@...2524...>
Message-ID: <5-6813199134517018827-16924913522877771443-gambas=googlecode.com@...2524...>

Updates:
	Status: Started
	Labels: -Version Version-TRUNK

Comment #5 on issue 438 by benoit.m... at ...626...: gb.xml.rpc sometimes  
doesn't parse data correctly due to incompleteness of received data
http://code.google.com/p/gambas/issues/detail?id=438

I tried to understand the miniserver code... huch...

I think the problem is what you told: calling ProcessQuery() before being  
sure that everything was read from the client. Instead of adding your loop,  
I call ProcessQuery() once the socket is closed without error.

This is in revision #5713.

Tell me if it works. If I cannot succeed in fixing the miniserver in a  
clean way, I will use your patch!

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From gambas at ...2524...  Sat Jun 29 18:35:22 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Sat, 29 Jun 2013 16:35:22 +0000
Subject: [Gambas-user] Issue 446 in gambas: Select statement returns no
	data
In-Reply-To: <2-6813199134517018827-9838962008381908090-gambas=googlecode.com@...2524...>
References: <2-6813199134517018827-9838962008381908090-gambas=googlecode.com@...2524...>
	<0-6813199134517018827-9838962008381908090-gambas=googlecode.com@...2524...>
Message-ID: <3-6813199134517018827-9838962008381908090-gambas=googlecode.com@...2524...>

Updates:
	Status: WontFix
	Labels: -Version Version-TRUNK

Comment #3 on issue 446 by benoit.m... at ...626...: Select statement returns  
no data
http://code.google.com/p/gambas/issues/detail?id=446

(No comment was entered for this change.)

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From gambas at ...2524...  Sat Jun 29 18:37:33 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Sat, 29 Jun 2013 16:37:33 +0000
Subject: [Gambas-user] Issue 445 in gambas: Project profiling setting
	not saved
In-Reply-To: <0-6813199134517018827-2981516577960554164-gambas=googlecode.com@...2524...>
References: <0-6813199134517018827-2981516577960554164-gambas=googlecode.com@...2524...>
Message-ID: <1-6813199134517018827-2981516577960554164-gambas=googlecode.com@...2524...>

Updates:
	Status: Fixed
	Labels: -Version Version-TRUNK

Comment #1 on issue 445 by benoit.m... at ...626...: Project profiling setting  
not saved
http://code.google.com/p/gambas/issues/detail?id=445

Thanks, fixed in revision #5714.

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From gambas at ...2524...  Sat Jun 29 18:40:43 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Sat, 29 Jun 2013 16:40:43 +0000
Subject: [Gambas-user] Issue 444 in gambas: Balloon location is wrong
	for a textbox
In-Reply-To: <0-6813199134517018827-4662149372359897761-gambas=googlecode.com@...2524...>
References: <0-6813199134517018827-4662149372359897761-gambas=googlecode.com@...2524...>
Message-ID: <1-6813199134517018827-4662149372359897761-gambas=googlecode.com@...2524...>

Updates:
	Labels: -Version Version-TRUNK

Comment #1 on issue 444 by benoit.m... at ...626...: Balloon location is wrong  
for a textbox
http://code.google.com/p/gambas/issues/detail?id=444

Mmm... I cannot reproduce your problem. The balloon is in the right place  
there. But I use KDE (and so KWin). I will try with Unity and Gnome3 if I  
can. Can you try with KDE yourself?

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From gambas at ...2524...  Sat Jun 29 18:41:43 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Sat, 29 Jun 2013 16:41:43 +0000
Subject: [Gambas-user] Issue 444 in gambas: Balloon location is wrong
	for a textbox
In-Reply-To: <1-6813199134517018827-4662149372359897761-gambas=googlecode.com@...2524...>
References: <1-6813199134517018827-4662149372359897761-gambas=googlecode.com@...2524...>
	<0-6813199134517018827-4662149372359897761-gambas=googlecode.com@...2524...>
Message-ID: <2-6813199134517018827-4662149372359897761-gambas=googlecode.com@...2524...>

Updates:
	Status: Accepted

Comment #2 on issue 444 by benoit.m... at ...626...: Balloon location is wrong  
for a textbox
http://code.google.com/p/gambas/issues/detail?id=444

(No comment was entered for this change.)

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From gambas at ...2524...  Sat Jun 29 19:02:56 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Sat, 29 Jun 2013 17:02:56 +0000
Subject: [Gambas-user] Issue 444 in gambas: Balloon location is wrong
	for a textbox
In-Reply-To: <2-6813199134517018827-4662149372359897761-gambas=googlecode.com@...2524...>
References: <2-6813199134517018827-4662149372359897761-gambas=googlecode.com@...2524...>
	<0-6813199134517018827-4662149372359897761-gambas=googlecode.com@...2524...>
Message-ID: <3-6813199134517018827-4662149372359897761-gambas=googlecode.com@...2524...>


Comment #3 on issue 444 by uAle... at ...626...: Balloon location is wrong for  
a textbox
http://code.google.com/p/gambas/issues/detail?id=444

I tried with KDE on Ubuntu 13.04 and then the Balloon is in the RIGHT  
place. So it is a specific desktop issue ;-(

I used the following procedure to install KDE next to Gnome and Unity:
http://linuxg.net/kde-4-10-3-has-been-released-install-kde-4-10-3-on-ubuntu-13-04/

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From adrien.prokopowicz at ...626...  Sat Jun 29 19:10:17 2013
From: adrien.prokopowicz at ...626... (Adrien Prokopowicz)
Date: Sat, 29 Jun 2013 19:10:17 +0200
Subject: [Gambas-user] Question about XML
In-Reply-To: <1371727753.2378.31.camel@...40...>
References: <1371727753.2378.31.camel@...40...>
Message-ID: <op.wzf9zfsedlsaci@...2913...>

Le Thu, 20 Jun 2013 13:29:13 +0200, Charlie Reinl <Karl.Reinl at ...9...>  
a ?crit:

> Salut Adrien,
>
> "Article :\ngreen peppers\ntinned tomatoes"
>
> this text saved with
>
> xml.Attribute("Text", "Article :\ngreen peppers\ntinned tomatoes")
> where xml is a XmlWriter
>
> the old XMLLib sorted thet
>
> Text="Article :&#10;green peppers&#10;tinned tomatoes"
>
> the new XMLLib saves it like
> Text="Article :
> green peppers
> tinned tomatoes"
>
> Now my question: is it a bug, or was it a bug.
> Just to know who makes the changes, you for all, or me in my project.
>
> Thanks anyway
>
>

Hi Charlie,

It is actually a bug inside gb.xml (a newline must be serialized to  
&#10;), I will take a look at it.

And sorry again for response time, I had tons of work these weeks.

Regards,

-- 
Adrien Prokopowicz



From taboege at ...626...  Sat Jun 29 20:03:29 2013
From: taboege at ...626... (Tobias Boege)
Date: Sat, 29 Jun 2013 20:03:29 +0200
Subject: [Gambas-user] Help binding to /dev/usbtmc0?
In-Reply-To: <1372442417901-42320.post@...3046...>
References: <1372198211969-42276.post@...3046...>
	<20130626074201.GA519@...2774...>
	<1372442417901-42320.post@...3046...>
Message-ID: <20130629180329.GA524@...2774...>

On Fri, 28 Jun 2013, dr.diesel wrote:
> Thanks for the help.  That is basically what I've done, expect all I get:
> 
> "System error #110: Connection Timed out"
> 
> I get the same when I cat and echo, but I get the proper response then get
> the error:
> 
> [root at ...2809... andy]# echo *IDN?>/dev/usbtmc0
> [root at ...2809... andy]# cat /dev/usbtmc0 
> Rigol Technologies,DSA815,DSA8A151449181,00.01.06.00.05
> ***10 second pause ****
> cat: /dev/usbtmc0: Connection timed out
> [root at ...2809... andy]# 
> 
> It appears that it is waiting for more, how to I read only what's there then
> exit?
> 
> I've tried a simple Read #hDevice and a While not EOF:
> 
> 
> Public hDevice As File 
> Public sLine As String 
> 
> 
> Public Sub Form_Open()
>  hDevice = Open "/dev/usbtmc0" For Input Output Watch
> End
> 
> Public Sub File_Read()
>   Dim iByte As Byte
> 
>   'Read #hDevice, iByte
>   'Print "Got one byte: "; iByte
>   '
>   While Not Eof(hDevice)
>     Line Input #hDevice, sLine
>     Print sLine
>   Wend
> End
> 
> Many thanks, any other suggestions?
> 

I have never seen this error with cat. At least we know for sure that this
is not a Gambas problem. Did you read [0]?

Regards,
Tobi

[0] http://www.spinics.net/lists/linux-usb/msg21894.html



From rmorgan62 at ...626...  Sat Jun 29 22:13:30 2013
From: rmorgan62 at ...626... (Randall Morgan)
Date: Sat, 29 Jun 2013 13:13:30 -0700
Subject: [Gambas-user] Help binding to /dev/usbtmc0?
In-Reply-To: <20130629180329.GA524@...2774...>
References: <1372198211969-42276.post@...3046...>
	<20130626074201.GA519@...2774...>
	<1372442417901-42320.post@...3046...> <20130629180329.GA524@...2774...>
Message-ID: <CAGwqEL6TfzVb2FNXgbeEcrMJj3vQK2kpcR1dSynR-0YuE+2hLQ@...627...>

Sorry to jump in here but I was wondering if this could be caused the mode
the usb connection is opened in? The OS is not required to send the data to
usb devices at the time your program talks to the usb port. The data is
often cached for some time before being sent to the usb device. There is a
usb mode know as interrupt mode. It is anything but a true interrupt mode.
It does however ask the OS to ensure that the data is sent to the usb
device within a particular time frame, 100ms for example. So using usb
interrupt mode you can at least request that your data be sent with a
certain time frame. But I have found that Windows 7 still does not always
cooperate in interrupt mode. My work with CNC stepper controllers resulted
in needing a polling routine and a buffer on the controller board. The
controller board also had to be able to handle real-time errors which meant
it had to deal with the sensors itself and simply report that status back
to the PC software (EMC2 and MACH3).  So in short, I wonder if you are
using the USB port in standard mode or interrupt mode and are you taking
into account the delay that the communications might experience?

Just some thoughts




On Sat, Jun 29, 2013 at 11:03 AM, Tobias Boege <taboege at ...626...> wrote:

> On Fri, 28 Jun 2013, dr.diesel wrote:
> > Thanks for the help.  That is basically what I've done, expect all I get:
> >
> > "System error #110: Connection Timed out"
> >
> > I get the same when I cat and echo, but I get the proper response then
> get
> > the error:
> >
> > [root at ...2809... andy]# echo *IDN?>/dev/usbtmc0
> > [root at ...2809... andy]# cat /dev/usbtmc0
> > Rigol Technologies,DSA815,DSA8A151449181,00.01.06.00.05
> > ***10 second pause ****
> > cat: /dev/usbtmc0: Connection timed out
> > [root at ...2809... andy]#
> >
> > It appears that it is waiting for more, how to I read only what's there
> then
> > exit?
> >
> > I've tried a simple Read #hDevice and a While not EOF:
> >
> >
> > Public hDevice As File
> > Public sLine As String
> >
> >
> > Public Sub Form_Open()
> >  hDevice = Open "/dev/usbtmc0" For Input Output Watch
> > End
> >
> > Public Sub File_Read()
> >   Dim iByte As Byte
> >
> >   'Read #hDevice, iByte
> >   'Print "Got one byte: "; iByte
> >   '
> >   While Not Eof(hDevice)
> >     Line Input #hDevice, sLine
> >     Print sLine
> >   Wend
> > End
> >
> > Many thanks, any other suggestions?
> >
>
> I have never seen this error with cat. At least we know for sure that this
> is not a Gambas problem. Did you read [0]?
>
> Regards,
> Tobi
>
> [0] http://www.spinics.net/lists/linux-usb/msg21894.html
>
>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Windows:
>
> Build for Windows Store.
>
> http://p.sf.net/sfu/windows-dev2dev
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>



-- 
If you ask me if it can be done. The answer is YES, it can always be done.
The correct questions however are... What will it cost, and how long will
it take?


From adrien.prokopowicz at ...626...  Sun Jun 30 02:39:13 2013
From: adrien.prokopowicz at ...626... (Adrien Prokopowicz)
Date: Sun, 30 Jun 2013 02:39:13 +0200
Subject: [Gambas-user] Question about XML
In-Reply-To: <1371727753.2378.31.camel@...40...>
References: <1371727753.2378.31.camel@...40...>
Message-ID: <op.wzgurnycdlsaci@...2913...>

Le Thu, 20 Jun 2013 13:29:13 +0200, Charlie Reinl <Karl.Reinl at ...9...>  
a ?crit:

> Salut Adrien,
>
> "Article :\ngreen peppers\ntinned tomatoes"
>
> this text saved with
>
> xml.Attribute("Text", "Article :\ngreen peppers\ntinned tomatoes")
> where xml is a XmlWriter
>
> the old XMLLib sorted thet
>
> Text="Article :&#10;green peppers&#10;tinned tomatoes"
>
> the new XMLLib saves it like
> Text="Article :
> green peppers
> tinned tomatoes"
>
> Now my question: is it a bug, or was it a bug.
> Just to know who makes the changes, you for all, or me in my project.
>
> Thanks anyway
>
>

Is this better with revision #5715 ?

-- 
Adrien Prokopowicz



From gambas at ...2524...  Sun Jun 30 05:06:48 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Sun, 30 Jun 2013 03:06:48 +0000
Subject: [Gambas-user] Issue 447 in gambas: tab key hierarchy
Message-ID: <0-6813199134517018827-11139320335715798953-gambas=googlecode.com@...2524...>

Status: New
Owner: ----
Labels: Version-TRUNK Type-Bug Priority-Medium OpSys-Any Dist-Other  
Arch-Any Desktop-Any GUI-Any

New issue 447 by centurio... at ...626...: tab key hierarchy
http://code.google.com/p/gambas/issues/detail?id=447

Hello! Greetings from Paraguay, Congratulations to Benoit for this  
wonderful project is excellent thank you very much! ...
Sorry for my poor English is not my language;
I want to report a bug in version 3.4.1 (the first time I make a bug report  
and I'm not sure how it is done) ...
When you press TAB, the application does not respect the hierarchy, does  
not traverse the controls that I have configured on my form ...
It happens on a clean form, without any code to control. The order is as  
follows within a frame as a container ...
ValueBox -> ComboBox -> TextBox -> ComboBox -> ValueBox (date format) ->  
TextArea

The "NoTabFocus" is FALSE, in all controls including the form and the  
container (frame).

 From ValBox to the ComboBox no problem, but from the combo (either) to the  
textbox or ValueBox not pass, it is as if you were making a "tab on  
KEY_PRESS STOP_EVENT". I tried without frame, with the same result.  
attached my form.

I hope that the correct way to report a bug, I apologize if not.

my system

[System]
OperatingSystem = Linux
Kernel = 3.2.0-48-generic
Architecture = x86_64
Distribution = Linux Mint 13 Maya
= GNOME Desktop
Theme = QGtk
Language = es_AR.UTF-8
Memory = 2759M

[Libraries]
GStreamer libgstreamer-0.10.so.0.30.0 =
GTK + = libgtk-x11-2.0.so.0.2400.10
Poppler = libpoppler.so.19.0.0
Qt4 = libQtCore.so.4.8.1
SDL = libSDL-1.2.so.0.11.3

Attachments:
	FAhorro.class  20 bytes
	FAhorro.form  5.5 KB

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From gambas at ...2524...  Sun Jun 30 05:22:10 2013
From: gambas at ...2524... (gambas at ...2524...)
Date: Sun, 30 Jun 2013 03:22:10 +0000
Subject: [Gambas-user] Issue 447 in gambas: tab key hierarchy
In-Reply-To: <0-6813199134517018827-11139320335715798953-gambas=googlecode.com@...2524...>
References: <0-6813199134517018827-11139320335715798953-gambas=googlecode.com@...2524...>
Message-ID: <1-6813199134517018827-11139320335715798953-gambas=googlecode.com@...2524...>


Comment #1 on issue 447 by centurio... at ...626...: tab key hierarchy
http://code.google.com/p/gambas/issues/detail?id=447

Please forgive me, I'm not a programmer, I am self taught and free software  
enthusiast and I'm doing a small project for personal use, I hastened to  
write without doing extensive testing, the error is because I needed to use  
the combobox property. tag as a String [], because you can not explicitly  
assign indexes;

example, a PK field of the database, as an index of the combobox ... that's  
why I saw the need to do this trick ... I'm using cbo.tag [cbo.index] for  
the PK field value in my db.

For being my first time Sorry, sorry, sorry ... My fault.

-- 
You received this message because this project is configured to send all  
issue notifications to this address.
You may adjust your notification preferences at:
https://code.google.com/hosting/settings



From Karl.Reinl at ...2345...  Sun Jun 30 17:26:41 2013
From: Karl.Reinl at ...2345... (Charlie Reinl)
Date: Sun, 30 Jun 2013 17:26:41 +0200
Subject: [Gambas-user] Question about XML
In-Reply-To: <op.wzgurnycdlsaci@...2913...>
References: <1371727753.2378.31.camel@...40...>
	<op.wzgurnycdlsaci@...2913...>
Message-ID: <1372606001.2567.2.camel@...40...>

Am Sonntag, den 30.06.2013, 02:39 +0200 schrieb Adrien Prokopowicz:
> Le Thu, 20 Jun 2013 13:29:13 +0200, Charlie Reinl <Karl.Reinl at ...9...>  
> a ?crit:
> 
> > Salut Adrien,
> >
> > "Article :\ngreen peppers\ntinned tomatoes"
> >
> > this text saved with
> >
> > xml.Attribute("Text", "Article :\ngreen peppers\ntinned tomatoes")
> > where xml is a XmlWriter
> >
> > the old XMLLib sorted thet
> >
> > Text="Article :&#10;green peppers&#10;tinned tomatoes"
> >
> > the new XMLLib saves it like
> > Text="Article :
> > green peppers
> > tinned tomatoes"
> >
> > Now my question: is it a bug, or was it a bug.
> > Just to know who makes the changes, you for all, or me in my project.
> >
> > Thanks anyway
> >
> >
> 
> Is this better with revision #5715 ?
> 

Salut Adrien,

i'v got #5716 and it works as expected now.


-- 
Amicalement
Charlie