[Gambas-user] Serial Port Change Events Not Working after Upgrade to Karmic

[nando]

I found out that reading one by one is a slow process,
I found out that reading all Lof will in a rare instance _READ will not fire
when only 1 byte arrives immediately after.
I find it works correctly 100% when I read Lof()-1 and rely on _Read to fire again.
for the one remaining and the new one arriving immediately after.


---------- Original Message -----------
From: Benoît Minisini <gambas at ...1...>
To: nando_f at ...951..., mailing list for gambas users
<gambas-user at lists.sourceforge.net>
Sent: Sat, 5 Dec 2009 21:56:41 +0100
Subject: Re: [Gambas-user] Serial Port Change Events Not Working after Upgrade to Karmic

> > Benoit,
> > Just to let you know, for your information only.
> > My serial port applicationS that have been running 24 hours for 4 years on
> > over 150 computers works much better when pull out All less 1 byte each
> > _Read event as opposed to.
> 
> I didn't understand the last sentence. Do you read bytes one by one or all at 
> once? You should read all available bytes at once, by using the Lof() 
> function.
> 
> Regards,
> 
> -- 
> Benoît Minisini
> 
> ------------------------------------------------------------------------------
> Join us December 9, 2009 for the Red Hat Virtual Experience,
> a free event focused on virtualization and cloud computing. 
> Attend in-depth sessions from your desk. Your couch. Anywhere.
> http://p.sf.net/sfu/redhat-sfdev2dev
> _______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user
------- End of Original Message -------