From simonart.dominique at ...11... Sat Dec 1 00:48:49 2007 From: simonart.dominique at ...11... (Dominique SIMONART) Date: Sat, 01 Dec 2007 00:48:49 +0100 Subject: [Gambas-user] Package creation for Suse 10.3 In-Reply-To: <200711302134.37659.gambas.fr@...626...> References: <474C9F1F.4090800@...11...> <200711301657.14301.rospolosco@...152...> <47505FBE.4000808@...11...> <200711302134.37659.gambas.fr@...626...> Message-ID: <4750A161.2010003@...11...> Hi Fabien and everybody Fabien Bodard a ?crit : > http://gambasdoc.org/help/install/opensuse > > Thanks for the link Fabien. I see this is for OpenSuse 10.2 but I will follow the advices step by step. I hope the dependencies will not change too much due to the 10.3 situation. regards, Dominique Simonart From simonart.dominique at ...11... Sat Dec 1 02:17:51 2007 From: simonart.dominique at ...11... (Dominique SIMONART) Date: Sat, 01 Dec 2007 02:17:51 +0100 Subject: [Gambas-user] Package creation for Suse 10.3 In-Reply-To: <4750A161.2010003@...11...> References: <474C9F1F.4090800@...11...> <200711301657.14301.rospolosco@...152...> <47505FBE.4000808@...11...> <200711302134.37659.gambas.fr@...626...> <4750A161.2010003@...11...> Message-ID: <4750B63F.4050703@...11...> Hi everybody Dominique SIMONART a ?crit : > Hi Fabien and everybody > > Fabien Bodard a ?crit : > >> http://gambasdoc.org/help/install/opensuse >> >> > Thanks for the link Fabien. I see this is for OpenSuse 10.2 but I will > follow the advices step by step. > I hope the dependencies will not change too much due to the 10.3 situation. > > Done :) First, I confirm that the RPM package creation works with the last svn version second the following components are disabled: gb.corba (no surprise here) gb.db.firebird gb.db.mysql gb.qte during the verification of dependancies I noticed this: qt3 OK, but what about qt4? kdelibs3 OK, but what about kdelibs4? corba was not found, orbit and orbit2 are proposed instead (I did'nt selected these packages) mysql: -devel and -shared are missing, where to find them?. I could see libmysqlclient-devel and libmysqlclient15 (shared libs) are there instead Is there necessity to update a bit more with OpenSuse 10.3 compared to OpenSuse 10.2? regards, Dominique Simonart From rohnny at ...1248... Sat Dec 1 08:46:48 2007 From: rohnny at ...1248... (R. Stormo) Date: Fri, 30 Nov 2007 23:46:48 -0800 (PST) Subject: [Gambas-user] Marketing In-Reply-To: <475059A6.5030608@...1000...> References: <474D5D92.6020501@...1000...> <200711281808.53260.gambas@...1...> <475059A6.5030608@...1000...> Message-ID: <14102977.post@...1379...> Werner-9 wrote: > > >> > How about something like > > The easiest way to write a program for Linux. > > or > Programming in the Fast Lane > > I started using Gambas as I needed to write a fairly simple GUI program > really quick but I had not written software in over a decade and my > knowledge of Linux was almost nil. It would be interesting to know why > other people started using it. > > I think we should have the "basic" work in there someplace. There are alot of windoze users that are looking for a programming language like vb and this is. Those phrase you have here does not say anything of what language this is. Could be another python og c language and those new users will not be interested. It should be something to describe what it is. I'm agree that "almost means basic" is not the right one . But if this what Benoit like/want so it should be. "Gambas, a basic language." Regards Rohnny My Gambas Community http://gambasforum.tk -- View this message in context: http://www.nabble.com/Marketing-tf4888193.html#a14102977 Sent from the gambas-user mailing list archive at Nabble.com. From Karl.Reinl at ...9... Sat Dec 1 10:32:22 2007 From: Karl.Reinl at ...9... (Charlie Reinl) Date: Sat, 01 Dec 2007 10:32:22 +0100 Subject: [Gambas-user] Marketing In-Reply-To: <14102977.post@...1379...> References: <474D5D92.6020501@...1000...> <200711281808.53260.gambas@...1...> <475059A6.5030608@...1000...> <14102977.post@...1379...> Message-ID: <1196501543.5477.7.camel@...40...> Am Freitag, den 30.11.2007, 23:46 -0800 schrieb R. Stormo: > > > Werner-9 wrote: > > > > > >> > > How about something like > > > > The easiest way to write a program for Linux. > > > > or > > Programming in the Fast Lane > > > > I started using Gambas as I needed to write a fairly simple GUI program > > really quick but I had not written software in over a decade and my > > knowledge of Linux was almost nil. It would be interesting to know why > > other people started using it. > > > > > > I think we should have the "basic" work in there someplace. There are alot > of windoze users that are looking for a programming language like vb and > this is. > Those phrase you have here does not say anything of what language this is. > Could be another python og c language and those new users will not be > interested. It should be something to describe what it is. > > I'm agree that "almost means basic" is not the right one . But if this what > Benoit like/want so it should be. > "Gambas, a basic language." "Gambas almost means basic" this is a classical Open Source Project name, where the name is an acronym for . While basic = Beginner's All-purpose Symbolic Instruction Code http://en.wikipedia.org/wiki/BASIC -- Amicalment Charlie From gambas.fr at ...626... Sat Dec 1 11:48:00 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Sat, 1 Dec 2007 11:48:00 +0100 Subject: [Gambas-user] Package creation for Suse 10.3 In-Reply-To: <4750B63F.4050703@...11...> References: <474C9F1F.4090800@...11...> <200711301657.14301.rospolosco@...152...> <47505FBE.4000808@...11...> <200711302134.37659.gambas.fr@...626...> <4750A161.2010003@...11...> <4750B63F.4050703@...11...> Message-ID: <6324a42a0712010248o3895a84fo3d90ffd02f98d865@...627...> QT4 and kde4 are not for this release... Next release will add thse feature and i hope more complete for kde4 2007/12/1, Dominique SIMONART : > > Hi everybody > > Dominique SIMONART a ?crit : > > Hi Fabien and everybody > > > > Fabien Bodard a ?crit : > > > >> http://gambasdoc.org/help/install/opensuse > >> > >> > > Thanks for the link Fabien. I see this is for OpenSuse 10.2 but I will > > follow the advices step by step. > > I hope the dependencies will not change too much due to the 10.3situation. > > > > > Done :) > First, I confirm that the RPM package creation works with the last svn > version > second the following components are disabled: > gb.corba (no surprise here) > gb.db.firebird > gb.db.mysql > gb.qte > > during the verification of dependancies I noticed this: > qt3 OK, but what about qt4? > kdelibs3 OK, but what about kdelibs4? > corba was not found, orbit and orbit2 are proposed instead (I did'nt > selected these packages) > mysql: -devel and -shared are missing, where to find them?. I could see > libmysqlclient-devel and libmysqlclient15 (shared libs) are there instead > > Is there necessity to update a bit more with OpenSuse 10.3 compared to > OpenSuse 10.2? > > regards, > Dominique Simonart > > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: The Future of Linux Business White Paper > from Novell. From the desktop to the data center, Linux is going > mainstream. Let it simplify your IT future. > http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > From gambas.fr at ...626... Sat Dec 1 12:11:31 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Sat, 1 Dec 2007 12:11:31 +0100 Subject: [Gambas-user] Marketing In-Reply-To: <1196501543.5477.7.camel@...40...> References: <474D5D92.6020501@...1000...> <200711281808.53260.gambas@...1...> <475059A6.5030608@...1000...> <14102977.post@...1379...> <1196501543.5477.7.camel@...40...> Message-ID: <6324a42a0712010311g722d38d5u8a146d6258af9e7a@...627...> Hey guys, the logo, name and acronym have really not importance... as you take many time, to make criticisme on that poor elements, please take many time to make news, information testing party as i do, to improve the world knowledge about Gambas. And don't forget that the most part of people that work on Gambas developpement are not English natives... It is not theire language, and as you can see not mine too. Gambas like python will grow in use by people not with marketing (it is not running on windows) but with it's numerous qualities. And there are many. First it is the simplicity of the language, it's stability, and it's great team disponibilty... (all of them have a rincipal job in side) Fabien I hope you understand my so poor English 2007/12/1, Charlie Reinl : > > Am Freitag, den 30.11.2007, 23:46 -0800 schrieb R. Stormo: > > > > > > Werner-9 wrote: > > > > > > > > >> > > > How about something like > > > > > > The easiest way to write a program for Linux. > > > > > > or > > > Programming in the Fast Lane > > > > > > I started using Gambas as I needed to write a fairly simple GUI > program > > > really quick but I had not written software in over a decade and my > > > knowledge of Linux was almost nil. It would be interesting to know why > > > other people started using it. > > > > > > > > > > I think we should have the "basic" work in there someplace. There are > alot > > of windoze users that are looking for a programming language like vb and > > this is. > > Those phrase you have here does not say anything of what language this > is. > > Could be another python og c language and those new users will not be > > interested. It should be something to describe what it is. > > > > I'm agree that "almost means basic" is not the right one . But if this > what > > Benoit like/want so it should be. > > "Gambas, a basic language." > > "Gambas almost means basic" this is a classical Open Source Project > name, where the name is an acronym for . > > While basic = Beginner's All-purpose Symbolic Instruction Code > > http://en.wikipedia.org/wiki/BASIC > > > > -- > Amicalment > Charlie > > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: The Future of Linux Business White Paper > from Novell. From the desktop to the data center, Linux is going > mainstream. Let it simplify your IT future. > http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > From rohnny at ...1248... Sat Dec 1 12:11:47 2007 From: rohnny at ...1248... (R. Stormo) Date: Sat, 1 Dec 2007 03:11:47 -0800 (PST) Subject: [Gambas-user] Marketing In-Reply-To: <1196501543.5477.7.camel@...40...> References: <474D5D92.6020501@...1000...> <200711281808.53260.gambas@...1...> <475059A6.5030608@...1000...> <14102977.post@...1379...> <1196501543.5477.7.camel@...40...> Message-ID: <14104168.post@...1379...> Charlie Reinl wrote: > > Am Freitag, den 30.11.2007, 23:46 -0800 schrieb R. Stormo: >> >> >> Werner-9 wrote: >> > >> > >> >> >> > How about something like >> > >> > The easiest way to write a program for Linux. >> > >> > or >> > Programming in the Fast Lane >> > >> > I started using Gambas as I needed to write a fairly simple GUI program >> > really quick but I had not written software in over a decade and my >> > knowledge of Linux was almost nil. It would be interesting to know why >> > other people started using it. >> > >> > >> >> I think we should have the "basic" work in there someplace. There are >> alot >> of windoze users that are looking for a programming language like vb and >> this is. >> Those phrase you have here does not say anything of what language this >> is. >> Could be another python og c language and those new users will not be >> interested. It should be something to describe what it is. >> >> I'm agree that "almost means basic" is not the right one . But if this >> what >> Benoit like/want so it should be. >> "Gambas, a basic language." > > "Gambas almost means basic" this is a classical Open Source Project > name, where the name is an acronym for . > > While basic = Beginner's All-purpose Symbolic Instruction Code > > http://en.wikipedia.org/wiki/BASIC > > > > -- > Amicalment > Charlie > > > > Thats ok, but does a normal windows person that have just converted to Linux now this? He/she is looking for a similar program under Linux that where used in windows. Normally I think that would be at google and something like this. vb for linux, visual basic for linux , basic linux or similar. Yes almost basic will come up. Not all people are very good in english and a translation (in head) would be something like this. "Gambas nearly basic". Maybe this can scare someone from trying and see that it's actually very similar and they can do very mutch what they did in windoze also. Maybe it's just me, but I looked at several "basic" language before I came over gambas. This was something I felt good with. But this was one of the reason I not have converted before. Some programs that I needed in daily basis to make things "as they where" Now over 5 years later I will never touch windows again If I can :-) What we do not need to forget is that most of us (I think) comes from windows and how hard was'nt it to convert. Regards Rohnny My Gambas Community http://gambasforum.tk -- View this message in context: http://www.nabble.com/Marketing-tf4888193.html#a14104168 Sent from the gambas-user mailing list archive at Nabble.com. From gambas at ...1... Sat Dec 1 13:53:29 2007 From: gambas at ...1... (Benoit Minisini) Date: Sat, 1 Dec 2007 13:53:29 +0100 Subject: [Gambas-user] Marketing In-Reply-To: <14104168.post@...1379...> References: <474D5D92.6020501@...1000...> <1196501543.5477.7.camel@...40...> <14104168.post@...1379...> Message-ID: <200712011353.30094.gambas@...1...> On samedi 1 d?cembre 2007, R. Stormo wrote: > Charlie Reinl wrote: > > Am Freitag, den 30.11.2007, 23:46 -0800 schrieb R. Stormo: > >> Werner-9 wrote: > >> > How about something like > >> > > >> > The easiest way to write a program for Linux. > >> > > >> > or > >> > Programming in the Fast Lane > >> > > >> > I started using Gambas as I needed to write a fairly simple GUI > >> > program really quick but I had not written software in over a decade > >> > and my knowledge of Linux was almost nil. It would be interesting to > >> > know why other people started using it. > >> > >> I think we should have the "basic" work in there someplace. There are > >> alot > >> of windoze users that are looking for a programming language like vb and > >> this is. > >> Those phrase you have here does not say anything of what language this > >> is. > >> Could be another python og c language and those new users will not be > >> interested. It should be something to describe what it is. > >> > >> I'm agree that "almost means basic" is not the right one . But if this > >> what > >> Benoit like/want so it should be. > >> "Gambas, a basic language." > > > > "Gambas almost means basic" this is a classical Open Source Project > > name, where the name is an acronym for . > > > > While basic = Beginner's All-purpose Symbolic Instruction Code > > > > http://en.wikipedia.org/wiki/BASIC > > > > > > > > -- > > Amicalment > > Charlie > > Thats ok, but does a normal windows person that have just converted to > Linux now this? > He/she is looking for a similar program under Linux that where used in > windows. Normally I think that would > be at google and something like this. > vb for linux, visual basic for linux , basic linux or similar. > When I type "visual basic for linux" on google, the first answer is a french link to a thread about Real Basic, and the second one is a link to the Gambas web site. We are before Mono! ;-) This was not the case a year ago, but Google is our friend. ;-) Actually I find that Gambas is better in attracting users than developers, and that something should be done for that too. Regards, -- Benoit Minisini From tomas.eroles at ...277... Sat Dec 1 13:56:38 2007 From: tomas.eroles at ...277... (Tomas Eroles i Forner) Date: Sat, 01 Dec 2007 13:56:38 +0100 Subject: [Gambas-user] Question about the real scope of Gambas, and other on compatibility Message-ID: <1196513798.4386.8.camel@...1787...> Hi all !! One friend on the spanish list of Gambas asked on that list about the real scope of this program, that is, if Gambas is really ready to develop big applications, as, for example (he asked) an ERP. I'm also interested on that, because I'm developing an application since many time, and it's becoming bigger each day I add something. By myself I would like to know if is possible (or will be possible anytime) to use Gambas for manage OpenOffice documents, that is, if could be possible to create Writer, Calc, Draw or Impress documents and fill or read them. Thanks in advance!! From tomas.eroles at ...277... Sat Dec 1 14:04:15 2007 From: tomas.eroles at ...277... (Tomas Eroles i Forner) Date: Sat, 01 Dec 2007 14:04:15 +0100 Subject: [Gambas-user] Marketing In-Reply-To: <200712011353.30094.gambas@...1...> References: <474D5D92.6020501@...1000...> <1196501543.5477.7.camel@...40...> <14104168.post@...1379...> <200712011353.30094.gambas@...1...> Message-ID: <1196514255.4386.16.camel@...1787...> I hope not be the only one, Benoit, but I don't agree what you say. I've been working as programmer some years ago, working with databases almost all the time. I discovered Gambas (for serendipity) some years ago when I was looking for an easy programming language for develop real applications in Linux, first for myself, and now, for my job (somebody there is talking about migration). I found Mono, I tried it and I had some problems with Monodevelop. I tried Gambas and it was succesful: it works fine, and each new version is a solid milestone, as I see. Regards El s?b, 01-12-2007 a las 13:53 +0100, Benoit Minisini escribi?: > Actually I find that Gambas is better in attracting users than developers, and > that something should be done for that too. > > Regards, > From gambas at ...1... Sat Dec 1 14:18:14 2007 From: gambas at ...1... (Benoit Minisini) Date: Sat, 1 Dec 2007 14:18:14 +0100 Subject: [Gambas-user] Question about the real scope of Gambas, and other on compatibility In-Reply-To: <1196513798.4386.8.camel@...1787...> References: <1196513798.4386.8.camel@...1787...> Message-ID: <200712011418.14538.gambas@...1...> On samedi 1 d?cembre 2007, Tomas Eroles i Forner wrote: > Hi all !! > One friend on the spanish list of Gambas asked on that list about the > real scope of this program, that is, if Gambas is really ready to > develop big applications, as, for example (he asked) an ERP. > > I'm also interested on that, because I'm developing an application since > many time, and it's becoming bigger each day I add something. > > > By myself I would like to know if is possible (or will be possible > anytime) to use Gambas for manage OpenOffice documents, that is, if > could be possible to create Writer, Calc, Draw or Impress documents and > fill or read them. > > Thanks in advance!! > It depends on what 'big' is for you... The Gambas IDE is the bigger application I made, and it can be considered as a "big" application. For my job, I have developed a web application in Gambas to manage any kind of network and data that can be put on a map. * You can define classes with fields with support for many datatypes, then create as much objects of any class, modify or remove them. * The interface of the forms used for editing objects is configurable. * You can put any object on a map thanks to Google Maps and Google Earth support. * You can search the object data with a "google-like" interface. * You can define users and groups, with fine-grained authorisation. * You can upload any file to the application, and attach these files to any objects. * You can generate any PDF and OpenOffice document from any object. This is based on a pre-defined OpenOffice document template. * You can export the result of a search in OpenOffice or Excel. * The web application manages a pure-ftpd ftp server so that users can use it to upload their file, if uploading with http does not work. * The application has support for plugins (written in Gambas or other languages). It allows to implement the very specific parts of your application. * The application has support for "cron-like" jobs. * You can use a smart phone PDA with a GPS to take photo and upload them to the application. An object is automatically created and positioned on Google Maps. At the moment, this application is used for managing pipelines, a call center, some water networks. But I think we will find more uses for it! It is fast, the executable is 500K with all debugging symbols. So I don't think that Gambas will prevent you from making an ERP. The difficulty is more in the programmer than in the language :-) Regards, -- Benoit Minisini From gambas at ...1... Sat Dec 1 14:19:04 2007 From: gambas at ...1... (Benoit Minisini) Date: Sat, 1 Dec 2007 14:19:04 +0100 Subject: [Gambas-user] Marketing In-Reply-To: <1196514255.4386.16.camel@...1787...> References: <474D5D92.6020501@...1000...> <200712011353.30094.gambas@...1...> <1196514255.4386.16.camel@...1787...> Message-ID: <200712011419.04951.gambas@...1...> On samedi 1 d?cembre 2007, Tomas Eroles i Forner wrote: > I hope not be the only one, Benoit, but I don't agree what you say. > > I've been working as programmer some years ago, working with databases > almost all the time. > > I discovered Gambas (for serendipity) some years ago when I was looking > for an easy programming language for develop real applications in Linux, > first for myself, and now, for my job (somebody there is talking about > migration). > I found Mono, I tried it and I had some problems with Monodevelop. I > tried Gambas and it was succesful: it works fine, and each new version > is a solid milestone, as I see. > > Regards > I meant developers that develop for Gambas itself, not that use Gambas for their own program :-) -- Benoit Minisini From tomas.eroles at ...277... Sat Dec 1 14:44:05 2007 From: tomas.eroles at ...277... (Tomas Eroles i Forner) Date: Sat, 01 Dec 2007 14:44:05 +0100 Subject: [Gambas-user] Marketing In-Reply-To: <200712011419.04951.gambas@...1...> References: <474D5D92.6020501@...1000...> <200712011353.30094.gambas@...1...> <1196514255.4386.16.camel@...1787...> <200712011419.04951.gambas@...1...> Message-ID: <1196516645.4386.18.camel@...1787...> Oops! Sorry for my english!! :-D El s?b, 01-12-2007 a las 14:19 +0100, Benoit Minisini escribi?: > On samedi 1 d?cembre 2007, Tomas Eroles i Forner wrote: > > I hope not be the only one, Benoit, but I don't agree what you say. > > > > I've been working as programmer some years ago, working with databases > > almost all the time. > > > > I discovered Gambas (for serendipity) some years ago when I was looking > > for an easy programming language for develop real applications in Linux, > > first for myself, and now, for my job (somebody there is talking about > > migration). > > I found Mono, I tried it and I had some problems with Monodevelop. I > > tried Gambas and it was succesful: it works fine, and each new version > > is a solid milestone, as I see. > > > > Regards > > > > I meant developers that develop for Gambas itself, not that use Gambas for > their own program :-) > From gambas.fr at ...626... Sat Dec 1 14:57:59 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Sat, 1 Dec 2007 14:57:59 +0100 Subject: [Gambas-user] Marketing In-Reply-To: <200712011353.30094.gambas@...1...> References: <474D5D92.6020501@...1000...> <1196501543.5477.7.camel@...40...> <14104168.post@...1379...> <200712011353.30094.gambas@...1...> Message-ID: <6324a42a0712010557t55395a05hcb6b083764cac9f7@...627...> > > When I type "visual basic for linux" on google, the first answer is a > french > link to a thread about Real Basic, and the second one is a link to the > Gambas > web site. We are before Mono! ;-) > > This was not the case a year ago, but Google is our friend. ;-) > > Actually I find that Gambas is better in attracting users than developers, > and > that something should be done for that too. > > Regards, > > -- > Benoit Minisini Unfortunally the both are linked... we need users to make the project important to eyes of potential good develloper ... It's true now to say if we have develloper to make many stable components for gambas then gambas will attract many and many develloper. And better if we can find a cool man that can devellop an inerpreter for windows :-P But at this time many Linux Basic are not fro linuxon prim on are multi plateform but not stable... look at KBasic( Buerrrk), hBasic (never finished), realbasic, ... Gambas is THE Linux BASIC as VB is THE windows Basic... But Gambas have THE LINUX PHILOSOPHIE and capabilities... So future is maybe for us... We have time ... It's not a commercial product. From gambas.fr at ...626... Sat Dec 1 15:00:29 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Sat, 1 Dec 2007 15:00:29 +0100 Subject: [Gambas-user] Question about the real scope of Gambas, and other on compatibility In-Reply-To: <200712011418.14538.gambas@...1...> References: <1196513798.4386.8.camel@...1787...> <200712011418.14538.gambas@...1...> Message-ID: <6324a42a0712010600t4b7d9aebx1723b0f141b35ff9@...627...> For an ERP (french) look : http://laurux.fr 2007/12/1, Benoit Minisini : > > On samedi 1 d?cembre 2007, Tomas Eroles i Forner wrote: > > Hi all !! > > One friend on the spanish list of Gambas asked on that list about the > > real scope of this program, that is, if Gambas is really ready to > > develop big applications, as, for example (he asked) an ERP. > > > > I'm also interested on that, because I'm developing an application since > > many time, and it's becoming bigger each day I add something. > > > > > > By myself I would like to know if is possible (or will be possible > > anytime) to use Gambas for manage OpenOffice documents, that is, if > > could be possible to create Writer, Calc, Draw or Impress documents and > > fill or read them. > > > > Thanks in advance!! > > > > It depends on what 'big' is for you... > > The Gambas IDE is the bigger application I made, and it can be considered > as > a "big" application. > > For my job, I have developed a web application in Gambas to manage any > kind of > network and data that can be put on a map. > > * You can define classes with fields with support for many datatypes, then > create as much objects of any class, modify or remove them. > * The interface of the forms used for editing objects is configurable. > * You can put any object on a map thanks to Google Maps and Google Earth > support. > * You can search the object data with a "google-like" interface. > * You can define users and groups, with fine-grained authorisation. > * You can upload any file to the application, and attach these files to > any > objects. > * You can generate any PDF and OpenOffice document from any object. This > is > based on a pre-defined OpenOffice document template. > * You can export the result of a search in OpenOffice or Excel. > * The web application manages a pure-ftpd ftp server so that users can use > it > to upload their file, if uploading with http does not work. > * The application has support for plugins (written in Gambas or other > languages). It allows to implement the very specific parts of your > application. > * The application has support for "cron-like" jobs. > * You can use a smart phone PDA with a GPS to take photo and upload them > to > the application. An object is automatically created and positioned on > Google > Maps. > > At the moment, this application is used for managing pipelines, a call > center, > some water networks. But I think we will find more uses for it! > > It is fast, the executable is 500K with all debugging symbols. > > So I don't think that Gambas will prevent you from making an ERP. The > difficulty is more in the programmer than in the language :-) > > Regards, > > -- > Benoit Minisini > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: The Future of Linux Business White Paper > from Novell. From the desktop to the data center, Linux is going > mainstream. Let it simplify your IT future. > http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > From gambas.fr at ...626... Sat Dec 1 15:02:56 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Sat, 1 Dec 2007 15:02:56 +0100 Subject: [Gambas-user] Question about the real scope of Gambas, and other on compatibility In-Reply-To: <200712011418.14538.gambas@...1...> References: <1196513798.4386.8.camel@...1787...> <200712011418.14538.gambas@...1...> Message-ID: <6324a42a0712010602h390a016ek5e0ee432275e3cdb@...627...> * The application has support for plugins (written in Gambas or other languages). It allows to implement the very specific parts of your application. How do you do that ? > So I don't think that Gambas will prevent you from making an ERP. The > difficulty is more in the programmer than in the language :-) > > Regards, > > -- > Benoit Minisini > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: The Future of Linux Business White Paper > from Novell. From the desktop to the data center, Linux is going > mainstream. Let it simplify your IT future. > http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > From steven at ...1652... Sat Dec 1 15:14:59 2007 From: steven at ...1652... (Steven Lobbezoo) Date: Sat, 1 Dec 2007 15:14:59 +0100 Subject: [Gambas-user] Marketing In-Reply-To: <6324a42a0712010557t55395a05hcb6b083764cac9f7@...627...> References: <474D5D92.6020501@...1000...> <200712011353.30094.gambas@...1...> <6324a42a0712010557t55395a05hcb6b083764cac9f7@...627...> Message-ID: <200712011514.59948.steven@...1652...> Hi, My 2 cents : I think that 'Marketing' does not fit in very well here. First of all, marketing is a way to make produkts 'sell'. So you can be a lair as much as you want (and sometimes must be) as long as something sells. Benoit is , as far as I know, not selling anything ;-) So : no marketing exists (per definition !) The only argument might be, to clear things for people who donnot know gambas yet, but who should, because it will help them. So, personally I think the phrase "Gambas almost means BASIC" hits it on the head : It's like Basic, but without the negative implications that Microsoft attached to it. Just right ! Regards, Steven From gambas at ...1... Sat Dec 1 15:18:27 2007 From: gambas at ...1... (Benoit Minisini) Date: Sat, 1 Dec 2007 15:18:27 +0100 Subject: [Gambas-user] Question about the real scope of Gambas, and other on compatibility In-Reply-To: <6324a42a0712010602h390a016ek5e0ee432275e3cdb@...627...> References: <1196513798.4386.8.camel@...1787...> <200712011418.14538.gambas@...1...> <6324a42a0712010602h390a016ek5e0ee432275e3cdb@...627...> Message-ID: <200712011518.27486.gambas@...1...> On samedi 1 d?cembre 2007, Fabien Bodard wrote: > * The application has support for plugins (written in Gambas or other > languages). It allows to implement the very specific parts of your > application. > > How do you do that ? > EXEC [ .... ] TO Result -- Benoit Minisini From tomas.eroles at ...277... Sat Dec 1 15:21:47 2007 From: tomas.eroles at ...277... (Tomas Eroles i Forner) Date: Sat, 01 Dec 2007 15:21:47 +0100 Subject: [Gambas-user] Question about the real scope of Gambas, and other on compatibility In-Reply-To: <6324a42a0712010600t4b7d9aebx1723b0f141b35ff9@...627...> References: <1196513798.4386.8.camel@...1787...> <200712011418.14538.gambas@...1...> <6324a42a0712010600t4b7d9aebx1723b0f141b35ff9@...627...> Message-ID: <1196518907.4386.37.camel@...1787...> As french people says: putain!!!!! It seems a wonderful application !!! El s?b, 01-12-2007 a las 15:00 +0100, Fabien Bodard escribi?: > For an ERP (french) look : http://laurux.fr > > > > 2007/12/1, Benoit Minisini : > > > > On samedi 1 d?cembre 2007, Tomas Eroles i Forner wrote: > > > Hi all !! > > > One friend on the spanish list of Gambas asked on that list about the > > > real scope of this program, that is, if Gambas is really ready to > > > develop big applications, as, for example (he asked) an ERP. > > > > > > I'm also interested on that, because I'm developing an application since > > > many time, and it's becoming bigger each day I add something. > > > > > > > > > By myself I would like to know if is possible (or will be possible > > > anytime) to use Gambas for manage OpenOffice documents, that is, if > > > could be possible to create Writer, Calc, Draw or Impress documents and > > > fill or read them. > > > > > > Thanks in advance!! > > > > > > > It depends on what 'big' is for you... > > > > The Gambas IDE is the bigger application I made, and it can be considered > > as > > a "big" application. > > > > For my job, I have developed a web application in Gambas to manage any > > kind of > > network and data that can be put on a map. > > > > * You can define classes with fields with support for many datatypes, then > > create as much objects of any class, modify or remove them. > > * The interface of the forms used for editing objects is configurable. > > * You can put any object on a map thanks to Google Maps and Google Earth > > support. > > * You can search the object data with a "google-like" interface. > > * You can define users and groups, with fine-grained authorisation. > > * You can upload any file to the application, and attach these files to > > any > > objects. > > * You can generate any PDF and OpenOffice document from any object. This > > is > > based on a pre-defined OpenOffice document template. > > * You can export the result of a search in OpenOffice or Excel. > > * The web application manages a pure-ftpd ftp server so that users can use > > it > > to upload their file, if uploading with http does not work. > > * The application has support for plugins (written in Gambas or other > > languages). It allows to implement the very specific parts of your > > application. > > * The application has support for "cron-like" jobs. > > * You can use a smart phone PDA with a GPS to take photo and upload them > > to > > the application. An object is automatically created and positioned on > > Google > > Maps. > > > > At the moment, this application is used for managing pipelines, a call > > center, > > some water networks. But I think we will find more uses for it! > > > > It is fast, the executable is 500K with all debugging symbols. > > > > So I don't think that Gambas will prevent you from making an ERP. The > > difficulty is more in the programmer than in the language :-) > > > > Regards, > > > > -- > > Benoit Minisini > > > > ------------------------------------------------------------------------- > > SF.Net email is sponsored by: The Future of Linux Business White Paper > > from Novell. From the desktop to the data center, Linux is going > > mainstream. Let it simplify your IT future. > > http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 > > _______________________________________________ > > Gambas-user mailing list > > Gambas-user at lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/gambas-user > > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: The Future of Linux Business White Paper > from Novell. From the desktop to the data center, Linux is going > mainstream. Let it simplify your IT future. > http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user From gambas.fr at ...626... Sat Dec 1 15:59:02 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Sat, 1 Dec 2007 15:59:02 +0100 Subject: [Gambas-user] Question about the real scope of Gambas, and other on compatibility In-Reply-To: <200712011518.27486.gambas@...1...> References: <1196513798.4386.8.camel@...1787...> <6324a42a0712010602h390a016ek5e0ee432275e3cdb@...627...> <200712011518.27486.gambas@...1...> Message-ID: <200712011559.02291.gambas.fr@...626...> Le Saturday 01 December 2007 15:18:27 Benoit Minisini, vous avez ?crit?: > On samedi 1 d?cembre 2007, Fabien Bodard wrote: > > * The application has support for plugins (written in Gambas or other > > languages). It allows to implement the very specific parts of your > > application. > > > > How do you do that ? > > EXEC [ .... ] TO Result ok :) From gambas.fr at ...626... Sat Dec 1 16:30:23 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Sat, 1 Dec 2007 16:30:23 +0100 Subject: [Gambas-user] Host for GambasForge Message-ID: <200712011630.23447.gambas.fr@...626...> Sujet?: Host for GambasForge Date?: samedi 1 d?cembre 2007 De?: Fabien Bodard ??: mailing list for french gambas users Hi to all, as the server i use for gambasforge is not stable and seem to have many problem... (Leo made the best he can do but do not have the time) Is there someone that have the ability to help me by finding a place on a private server with gambas svn support or at least the up to date last 1.9.91 version, a mysql db, email, and some place... I join to this request a screenshot of the new gambasforge look. It is not finished but will be far better and complete than the older php version Regards, Fabien Bodard -------------- next part -------------- A non-text attachment was scrubbed... Name: capture28.png Type: image/png Size: 169178 bytes Desc: not available URL: From sourceforge-raindog2 at ...94... Sat Dec 1 19:52:17 2007 From: sourceforge-raindog2 at ...94... (Rob) Date: Sat, 1 Dec 2007 13:52:17 -0500 Subject: [Gambas-user] Question about the real scope of Gambas, and other on compatibility In-Reply-To: <1196513798.4386.8.camel@...1787...> References: <1196513798.4386.8.camel@...1787...> Message-ID: <200712011352.17311.sourceforge-raindog2@...94...> On Saturday 01 December 2007 07:56, Tomas Eroles i Forner wrote: > By myself I would like to know if is possible (or will be possible > anytime) to use Gambas for manage OpenOffice documents, that is, if > could be possible to create Writer, Calc, Draw or Impress documents > and fill or read them. The ZIP file component I'm currently writing is meant to be a first step towards generating ODF documents (which are XML files stored in JAR files, which in turn are ZIP files), though it'll be a long time before an ODF component I write will be spec-complete. (The Perl one I use is far, far from spec-complete, and not too user-friendly, and I just want to do better than that. ;) ) My ZIP component can currently open a ZIP file and list its contents. I'll post a first version once it can read a file from the ZIP file into a variable. That should be enough to allow reading ODF files, though I'll probably keep working on gb.zip (or gb.archive.zip or gb.compress.zip, whatever Benoit wants me to name it) until it can write files as well before tackling ODF. And my personal preference for writing an ERP application at this point would be web-based with some additional background processes. While Gambas is certainly capable of that, I personally would use perl or php. Some would say you should use j2ee because it has "Enterprise" in its name. In my opinion, those people need to loosen up their neckties a little. Rob From sourceforge-raindog2 at ...94... Sat Dec 1 19:58:51 2007 From: sourceforge-raindog2 at ...94... (Rob) Date: Sat, 1 Dec 2007 13:58:51 -0500 Subject: [Gambas-user] Marketing In-Reply-To: <14104168.post@...1379...> References: <474D5D92.6020501@...1000...> <1196501543.5477.7.camel@...40...> <14104168.post@...1379...> Message-ID: <200712011358.51944.sourceforge-raindog2@...94...> On Saturday 01 December 2007 06:11, R. Stormo wrote: > Yes almost basic will come up. Not all people are very good in > english and a translation (in head) would be something like this. > "Gambas nearly basic". Well, Gambas really ISN'T Visual Basic. I just had to use Visual Basic again last week. Visual Basic sucks. Gambas doesn't ;) Rob From gambas at ...1... Sat Dec 1 22:35:57 2007 From: gambas at ...1... (Benoit Minisini) Date: Sat, 1 Dec 2007 22:35:57 +0100 Subject: [Gambas-user] Question about the real scope of Gambas, and other on compatibility In-Reply-To: <200712011352.17311.sourceforge-raindog2@...94...> References: <1196513798.4386.8.camel@...1787...> <200712011352.17311.sourceforge-raindog2@...94...> Message-ID: <200712012235.57377.gambas@...1...> On samedi 1 d?cembre 2007, Rob wrote: > On Saturday 01 December 2007 07:56, Tomas Eroles i Forner wrote: > > By myself I would like to know if is possible (or will be possible > > anytime) to use Gambas for manage OpenOffice documents, that is, if > > could be possible to create Writer, Calc, Draw or Impress documents > > and fill or read them. > > The ZIP file component I'm currently writing is meant to be a first > step towards generating ODF documents (which are XML files stored in > JAR files, which in turn are ZIP files), though it'll be a long time > before an ODF component I write will be spec-complete. (The Perl one > I use is far, far from spec-complete, and not too user-friendly, and > I just want to do better than that. ;) ) > > My ZIP component can currently open a ZIP file and list its contents. > I'll post a first version once it can read a file from the ZIP file > into a variable. That should be enough to allow reading ODF files, > though I'll probably keep working on gb.zip (or gb.archive.zip or > gb.compress.zip, whatever Benoit wants me to name it) until it can > write files as well before tackling ODF. > > And my personal preference for writing an ERP application at this > point would be web-based with some additional background processes. > While Gambas is certainly capable of that, I personally would use > perl or php. Some would say you should use j2ee because it > has "Enterprise" in its name. In my opinion, those people need to > loosen up their neckties a little. > > Rob > gb.compress works the same way as gb.db. It can compress and uncompress specific file formats provided that you write the gb.compress.XXX driver for that (gb.compress.zip in that case). Look in the source code of gb.compress.zlib to see how to write gb.compress.zip. Anyway, I use directly the zip & unzip utilities via EXEC to uncompress and compress the OpenOffice files, so a specific component is not really needed for that. Regards, -- Benoit Minisini From gareth at ...1689... Sun Dec 2 00:21:48 2007 From: gareth at ...1689... (Gareth Bult) Date: Sat, 1 Dec 2007 23:21:48 +0000 (GMT) Subject: [Gambas-user] [Gambas-devel] Host for GambasForge In-Reply-To: <200712011630.23447.gambas.fr@...626...> Message-ID: <31147961.14501196551308350.JavaMail.root@...1708...> Hi, We can and do provide free space and resources to Gambas .. Gambasforge however is a duplication of the software release system available on gambasrad.org ... So ... ??? (why??) ----- Original Message ----- From: "Fabien Bodard" To: "mailing list for gambas developers" , "mailing list for gambas users" Sent: Saturday, December 1, 2007 3:30:23 PM (GMT) Europe/London Subject: [Gambas-devel] Host for GambasForge Sujet : Host for GambasForge Date : samedi 1 d?cembre 2007 De : Fabien Bodard ? : mailing list for french gambas users Hi to all, as the server i use for gambasforge is not stable and seem to have many problem... (Leo made the best he can do but do not have the time) Is there someone that have the ability to help me by finding a place on a private server with gambas svn support or at least the up to date last 1.9.91 version, a mysql db, email, and some place... I join to this request a screenshot of the new gambasforge look. It is not finished but will be far better and complete than the older php version Regards, Fabien Bodard From ronstk at ...239... Sun Dec 2 02:40:58 2007 From: ronstk at ...239... (ron) Date: Sun, 2 Dec 2007 02:40:58 +0100 Subject: [Gambas-user] [Gambas-devel] Host for GambasForge In-Reply-To: <31147961.14501196551308350.JavaMail.root@...1708...> References: <31147961.14501196551308350.JavaMail.root@...1708...> Message-ID: <200712020240.58961.ronstk@...239...> On Sunday 02 December 2007 00:21, Gareth Bult wrote: > Hi, > > We can and do provide free space and resources to Gambas .. > Gambasforge however is a duplication of the software release system available on gambasrad.org ... > > So ... ??? > (why??) > Not realy true. Gambasforge site as repository was before gambasrad.org online. It's just the case plone has a available framework for this purpose and you did include it in gambasrad for your own, in my view perfect, gridviewdb component. For Fabien with the instable site problems it is not a bad point now to merge with that plone frame work and if he can be the moderator/admin of that section. Also for Fabien it is/can be more easy to not have the job of developing this framework, same as inventing the weel again, and get the bugtracker and forum parts of plone. I do understand it is for Fabien also a project to make it with gambas as engine on the backend for practice of working with gambas as far I know at the moment. If I had the same as Fabien I would think about that/any merge and prevent dividing up to too many gambas sites or talk with Rohnny Stormo on http://gambasforum.tk. It's just a pitty I can't do it anymore by sharing the account on the 1&1.de webspace I have for development and storage as I offer a few years back to Fabien. Ron From sourceforge-raindog2 at ...94... Sun Dec 2 07:52:49 2007 From: sourceforge-raindog2 at ...94... (Rob) Date: Sun, 2 Dec 2007 01:52:49 -0500 Subject: [Gambas-user] Host for GambasForge In-Reply-To: <31147961.14501196551308350.JavaMail.root@...1708...> References: <31147961.14501196551308350.JavaMail.root@...1708...> Message-ID: <200712020152.50077.sourceforge-raindog2@...94...> On Saturday 01 December 2007 18:21, Gareth Bult wrote: > Gambasforge however is a duplication of the software release system > available on gambasrad.org ... Quite the opposite, since Gambasforge was around for 2 or 3 years before you created gambasrad.org. Rob From sourceforge-raindog2 at ...94... Sun Dec 2 08:09:41 2007 From: sourceforge-raindog2 at ...94... (Rob) Date: Sun, 2 Dec 2007 02:09:41 -0500 Subject: [Gambas-user] Question about the real scope of Gambas, and other on compatibility In-Reply-To: <200712012235.57377.gambas@...1...> References: <1196513798.4386.8.camel@...1787...> <200712011352.17311.sourceforge-raindog2@...94...> <200712012235.57377.gambas@...1...> Message-ID: <200712020209.41105.sourceforge-raindog2@...94...> On Saturday 01 December 2007 16:35, Benoit Minisini wrote: > gb.compress works the same way as gb.db. It can compress and > uncompress specific file formats provided that you write the > gb.compress.XXX driver for that (gb.compress.zip in that case). > Look in the source code of gb.compress.zlib to see how to write > gb.compress.zip. Well, actually, I did, and that won't work. gb.compress.zlib and gb.compress.bzlib2 only provide an interface to handle "Unix compress" style files, which contain a single compressed file. ZIP files are a whole filesystem, like tar files whose members are compressed (rather than the Unix way of an uncompressed tar file which is compressed as a whole), and need some extra virtual classes and collections to implement that stuff. For that matter, the fopen/fseek and in-memory compression methods provided in gb.compress.* aren't even analogous to any operations with a ZIP file: say you compress the contents of a variable. What do you do with it then? With gzip/bzip2 you just output it to a file and that's it. With ZIP you need to create the archive and then add the file. You also need separate open/seek functions for the zip file and for the files inside the zip file. That's why I was suggesting gb.archive.zip. > Anyway, I use directly the zip & unzip utilities via EXEC to > uncompress and compress the OpenOffice files, so a specific > component is not really needed for that. Would you really accept a gb.odf component that relied on EXEC? Because my original proposed pcre component did, and because you disapproved, I ended up writing it in C, as I'm now doing with gb.zip. For that matter, why do we have gb.compress.zlib when gzip and gunzip are so trivial compared to zip and unzip, and could be much more easily used with EXEC? Rob From gareth at ...1689... Sun Dec 2 10:45:56 2007 From: gareth at ...1689... (Gareth Bult) Date: Sun, 2 Dec 2007 09:45:56 +0000 (GMT) Subject: [Gambas-user] Host for GambasForge In-Reply-To: <200712020152.50077.sourceforge-raindog2@...94...> Message-ID: <91727.14541196588756738.JavaMail.root@...1708...> Sorry, my poor use of English. I wasn't implying gambas forge had copied gambasrad, I was simply saying they provide the same facilities. The difference is that Plone was designed as a Content management system, is already sitting on a scalable platform with access to 12 Xeon CPU's with 16Gb of RAM and the software release module is a standard package supported by a large open source community. If both are hosted and working, great, there's a choice. If one isn't hosting or isn't working, why not use the other ? -- Gambas is great and can do lots of things .. That doesn't mean however that it's the best tool for every job or that it has to be used for every job (!) -- ----- Original Message ----- From: "Rob" To: gambas-user at lists.sourceforge.net Sent: Sunday, December 2, 2007 6:52:49 AM (GMT) Europe/London Subject: Re: [Gambas-user] Host for GambasForge On Saturday 01 December 2007 18:21, Gareth Bult wrote: > Gambasforge however is a duplication of the software release system > available on gambasrad.org ... Quite the opposite, since Gambasforge was around for 2 or 3 years before you created gambasrad.org. Rob ------------------------------------------------------------------------- SF.Net email is sponsored by: The Future of Linux Business White Paper from Novell. From the desktop to the data center, Linux is going mainstream. Let it simplify your IT future. http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 _______________________________________________ Gambas-user mailing list Gambas-user at lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user From gambas.fr at ...626... Sun Dec 2 11:09:17 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Sun, 2 Dec 2007 11:09:17 +0100 Subject: [Gambas-user] Host for GambasForge In-Reply-To: <91727.14541196588756738.JavaMail.root@...1708...> References: <91727.14541196588756738.JavaMail.root@...1708...> Message-ID: <200712021109.17650.gambas.fr@...626...> Gambasforge is not and really not the same than gambasrad ! the project management is more simple and more clear... Yes it's true the is certainly less feature and i need to re invent the wheel... But it's in gambas. Benoit have done the same with gambasdoc why hasn't he used the mediawiki framework who is good too... Becaus he have his own ideas about what he's want. Gambasforge is not a content manager but a communauty agregator... in fact it is based on a already existing French site. Then is there only one only site for repository python project ... the response is no. Gareth we can have the same host but not the same dns... For user it will be different. Or have you found how to change the Plone project management desing.... Fabien PS for this time it's just a simple query... maybe others can provide something else. From gambas at ...1... Sun Dec 2 11:14:21 2007 From: gambas at ...1... (Benoit Minisini) Date: Sun, 2 Dec 2007 11:14:21 +0100 Subject: [Gambas-user] Question about the real scope of Gambas, and other on compatibility In-Reply-To: <200712020209.41105.sourceforge-raindog2@...94...> References: <1196513798.4386.8.camel@...1787...> <200712012235.57377.gambas@...1...> <200712020209.41105.sourceforge-raindog2@...94...> Message-ID: <200712021114.21419.gambas@...1...> On dimanche 2 d?cembre 2007, Rob wrote: > On Saturday 01 December 2007 16:35, Benoit Minisini wrote: > > gb.compress works the same way as gb.db. It can compress and > > uncompress specific file formats provided that you write the > > gb.compress.XXX driver for that (gb.compress.zip in that case). > > Look in the source code of gb.compress.zlib to see how to write > > gb.compress.zip. > > Well, actually, I did, and that won't work. gb.compress.zlib and > gb.compress.bzlib2 only provide an interface to handle "Unix > compress" style files, which contain a single compressed file. ZIP > files are a whole filesystem, like tar files whose members are > compressed (rather than the Unix way of an uncompressed tar file > which is compressed as a whole), and need some extra virtual classes > and collections to implement that stuff. > > For that matter, the fopen/fseek and in-memory compression methods > provided in gb.compress.* aren't even analogous to any operations > with a ZIP file: say you compress the contents of a variable. What > do you do with it then? With gzip/bzip2 you just output it to a file > and that's it. With ZIP you need to create the archive and then add > the file. You also need separate open/seek functions for the zip > file and for the files inside the zip file. That's why I was > suggesting gb.archive.zip. > > > Anyway, I use directly the zip & unzip utilities via EXEC to > > uncompress and compress the OpenOffice files, so a specific > > component is not really needed for that. > > Would you really accept a gb.odf component that relied on EXEC? > Because my original proposed pcre component did, and because you > disapproved, I ended up writing it in C, as I'm now doing with > gb.zip. Seems logic, as running a process for just matching a regular expression is too heavy. But when you just have to unzip a zip file, and zip it back just once for generating an OpenOffice document, it is acceptable. > > For that matter, why do we have gb.compress.zlib when gzip and gunzip > are so trivial compared to zip and unzip, and could be much more > easily used with EXEC? I don't know, I didn't make them. :-) If running an external process is not heavy relatively to the task, I usually run the process. Especially if this process is a GNU tool that is usually always or often installed on the system. When you have to use an archive format (like tar.gz or zip), of course you need more features: browse the archive, extract a specific file from the archive, insert or replace a file in the archive... Actually I don't know, but I think then the command-line tool should provide these features, so that you don't need to use the underlying library for accessing this tool. I usually prefer that, because I am lazy :-) But maybe other people will have a real use of archive or compression management components. They must tell. Regards, -- Benoit Minisini From gambas at ...1... Sun Dec 2 11:20:35 2007 From: gambas at ...1... (Benoit Minisini) Date: Sun, 2 Dec 2007 11:20:35 +0100 Subject: [Gambas-user] Host for GambasForge In-Reply-To: <91727.14541196588756738.JavaMail.root@...1708...> References: <91727.14541196588756738.JavaMail.root@...1708...> Message-ID: <200712021120.35554.gambas@...1...> On dimanche 2 d?cembre 2007, Gareth Bult wrote: > Sorry, my poor use of English. > I wasn't implying gambas forge had copied gambasrad, I was simply saying > they provide the same facilities. > > The difference is that Plone was designed as a Content management system, > is already sitting on a scalable platform with access to 12 Xeon CPU's with > 16Gb of RAM and the software release module is a standard package supported > by a large open source community. > > If both are hosted and working, great, there's a choice. > If one isn't hosting or isn't working, why not use the other ? > > -- > Gambas is great and can do lots of things .. > That doesn't mean however that it's the best tool for every job or that it > has to be used for every job (!) -- > There is the "marketing" problem too. :-) Of course Plone will be more powerful than anything we could write in Gambas at the moment. But, on the other hand, people will be more confident if they see that the Gambas guys use Gambas for their own thing. Otherwise they will tell "c'mon these guys don't even use their own language! They work at Microsoft or what?" :-) -- Benoit Minisini From gambas.fr at ...626... Sun Dec 2 15:17:17 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Sun, 2 Dec 2007 15:17:17 +0100 Subject: [Gambas-user] Host for GambasForge In-Reply-To: <200712021120.35554.gambas@...1...> References: <91727.14541196588756738.JavaMail.root@...1708...> <200712021120.35554.gambas@...1...> Message-ID: <200712021517.17732.gambas.fr@...626...> Le Sunday 02 December 2007 11:20:35 Benoit Minisini, vous avez ?crit?: > On dimanche 2 d?cembre 2007, Gareth Bult wrote: > > Sorry, my poor use of English. > > I wasn't implying gambas forge had copied gambasrad, I was simply saying > > they provide the same facilities. > > > > The difference is that Plone was designed as a Content management system, > > is already sitting on a scalable platform with access to 12 Xeon CPU's > > with 16Gb of RAM and the software release module is a standard package > > supported by a large open source community. > > > > If both are hosted and working, great, there's a choice. > > If one isn't hosting or isn't working, why not use the other ? > > > > -- > > Gambas is great and can do lots of things .. > > That doesn't mean however that it's the best tool for every job or that > > it has to be used for every job (!) -- > > There is the "marketing" problem too. :-) > > Of course Plone will be more powerful than anything we could write in > Gambas at the moment. > > But, on the other hand, people will be more confident if they see that the > Gambas guys use Gambas for their own thing. Otherwise they will tell "c'mon > these guys don't even use their own language! They work at Microsoft or > what?" :-) I do not want war :-P... On other hand, plone can manage many big project with ressource management, bug tracker, i will use it for my own Big project with many devellopper... But to send snippet, code exemple, tutorial, private news... ouch... plone is too fat. Our site are differente and have different goal... to do plone many and many devellopers have working on... for gambasforge ... for now i'm the one. So yes there is bugs, and the site change and change :) But it's why it is interesting... it's not my interest to manage content, but it's a real plasure to make this site, and it's with anthousiasm, that i'm doing that in gambas ! The goal is not to be perfect... but to be in gambas :) Then to be simple for user. Then to give users the need to have this web page in home page ;-P AS have say Bill in the past, We have to become unavoidable Fabien From dcamposf at ...626... Mon Dec 3 22:33:00 2007 From: dcamposf at ...626... (Daniel Campos) Date: Mon, 3 Dec 2007 22:33:00 +0100 Subject: [Gambas-user] Spanish site redesigned Message-ID: <7259b5ae0712031333q11b3c531n6f75fe0331564e08@...627...> Hi: I've redesigned the spanish site at gnulinex.org, using a Web 2.0... mmh... sorry, Gambas 2.0 style: http://gambas.gnulinex.org/web/index.html May be anybody would find it interesting as a template for other Gambas related sites. Daniel From simonart.dominique at ...11... Tue Dec 4 15:57:56 2007 From: simonart.dominique at ...11... (Dominique SIMONART) Date: Tue, 04 Dec 2007 15:57:56 +0100 Subject: [Gambas-user] ToggleButton Message-ID: <47556AF4.6090109@...11...> Hi everybody, How can I force a togglebutton to be ON by program? an exemple: a program could accept Reading, Updating and Erasing modes I associate these modes with 3 togglebuttons and I want the program start with the Reading mode. All is OK except the togglebutton is not ON. I search for something like Checked, but I cannot found anything similar in the properties. Thank for your help Dominique Simonart From rospolosco at ...152... Tue Dec 4 16:06:27 2007 From: rospolosco at ...152... (Stefano Palmeri) Date: Tue, 4 Dec 2007 16:06:27 +0100 Subject: [Gambas-user] ToggleButton In-Reply-To: <47556AF4.6090109@...11...> References: <47556AF4.6090109@...11...> Message-ID: <200712041606.28125.rospolosco@...152...> Alle 15:57, marted? 4 dicembre 2007, Dominique SIMONART ha scritto: > Hi everybody, > > How can I force a togglebutton to be ON by program? > > an exemple: a program could accept Reading, Updating and Erasing modes > I associate these modes with 3 togglebuttons and I want the program > start with the Reading mode. All is OK except the togglebutton is not ON. > I search for something like Checked, but I cannot found anything similar > in the properties. > > Thank for your help > Dominique Simonart > In properties set Value = True Stefano > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: The Future of Linux Business White Paper > from Novell. From the desktop to the data center, Linux is going > mainstream. Let it simplify your IT future. > http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user From simonart.dominique at ...11... Tue Dec 4 16:17:08 2007 From: simonart.dominique at ...11... (Dominique SIMONART) Date: Tue, 04 Dec 2007 16:17:08 +0100 Subject: [Gambas-user] ToggleButton In-Reply-To: <200712041606.28125.rospolosco@...152...> References: <47556AF4.6090109@...11...> <200712041606.28125.rospolosco@...152...> Message-ID: <47556F74.7030108@...11...> Stefano Palmeri a ?crit : > Alle 15:57, marted? 4 dicembre 2007, Dominique SIMONART ha scritto: > >> Hi everybody, >> >> How can I force a togglebutton to be ON by program? >> >> an exemple: a program could accept Reading, Updating and Erasing modes >> I associate these modes with 3 togglebuttons and I want the program >> start with the Reading mode. All is OK except the togglebutton is not ON. >> I search for something like Checked, but I cannot found anything similar >> in the properties. >> >> Thank for your help >> Dominique Simonart >> >> > > In properties set Value = True > > Stefano > Thank Stefano I feel so stupid to not read ALL the properties! Dominique Simonart From ronstk at ...239... Tue Dec 4 19:55:05 2007 From: ronstk at ...239... (ron) Date: Tue, 4 Dec 2007 19:55:05 +0100 Subject: [Gambas-user] ToggleButton In-Reply-To: <200712041606.28125.rospolosco@...152...> References: <47556AF4.6090109@...11...> <200712041606.28125.rospolosco@...152...> Message-ID: <200712041955.05556.ronstk@...239...> On Tuesday 04 December 2007 16:06, Stefano Palmeri wrote: > Alle 15:57, marted? 4 dicembre 2007, Dominique SIMONART ha scritto: > > Hi everybody, > > > > How can I force a togglebutton to be ON by program? > > > > an exemple: a program could accept Reading, Updating and Erasing modes > > I associate these modes with 3 togglebuttons and I want the program > > start with the Reading mode. All is OK except the togglebutton is not ON. > > I search for something like Checked, but I cannot found anything similar > > in the properties. > > > > Thank for your help > > Dominique Simonart > > > > In properties set Value = True > > Stefano > > Dominique, you can do it also in the Form_Open code. But take care the code related to the actual pressing that button is also executed at that moment. This can be used to update other related controls which are not (pre)initialized by setting the property in design mode, i.e. a list/column-view with items. To prevent this executing you can lock the events. Ron From gambas at ...1... Tue Dec 4 21:25:13 2007 From: gambas at ...1... (Benoit Minisini) Date: Tue, 4 Dec 2007 21:25:13 +0100 Subject: [Gambas-user] Finally Gambas got "SendKeys" Message-ID: <200712042125.14248.gambas@...1...> Hi, The last revision includes an "intelligent" implementation of Desktop.SendKeys, that allows to send any key to the window having the focus. What is sent internally are keyboard codes, and so this method tries to map strings to this keycodes, by searching which modifier keys must apply to enter the key. For example, on a french keyboard, sending "@" needs actually a press on a modifier key (ALT-GR, which of course does not have this name on X11, otherwise things would have been too simple...). Well, this is why this function is "intelligent". I invite you to check this function or your own keyboard, especially if it not a french layout, and tell me the result... Regards, -- Benoit Minisini From gambas at ...1... Tue Dec 4 21:30:11 2007 From: gambas at ...1... (Benoit Minisini) Date: Tue, 4 Dec 2007 21:30:11 +0100 Subject: [Gambas-user] Finally Gambas got "SendKeys" In-Reply-To: <200712042125.14248.gambas@...1...> References: <200712042125.14248.gambas@...1...> Message-ID: <200712042130.11333.gambas@...1...> On mardi 4 d?cembre 2007, Benoit Minisini wrote: > Hi, > > The last revision includes an "intelligent" implementation of > Desktop.SendKeys, that allows to send any key to the window having the > focus. > > What is sent internally are keyboard codes, and so this method tries to map > strings to this keycodes, by searching which modifier keys must apply to -----------> these > enter the key. --> get the right key. > > For example, on a french keyboard, sending "@" needs actually a press on a > modifier key (ALT-GR, which of course does not have this name on X11, > otherwise things would have been too simple...). > > Well, this is why this function is "intelligent". I invite you to check > this function or your own keyboard, especially if it not a french layout, -----------------------------------------------------> is > and tell me the result... > > Regards, -- Benoit Minisini From gambas at ...1... Tue Dec 4 21:44:06 2007 From: gambas at ...1... (Benoit Minisini) Date: Tue, 4 Dec 2007 21:44:06 +0100 Subject: [Gambas-user] About the Gambas article Message-ID: <200712042144.06234.gambas@...1...> Apparently, OSNews is not really interested by the article: I have submitted the article the 14 Nov. Having no answer from them, I wrote them again, and I finally got an answer from the "managing editor" telling me that the article is accepted, but that it needs a little work before being published. Seeing nothing since, I wrote him again last sunday (2 dec), but didn't get any answer. So, now, I'm looking for another place where this article could be submitted: does anyone have some ideas? -- Benoit Minisini From esucno at ...626... Wed Dec 5 00:29:24 2007 From: esucno at ...626... (esucno esucno) Date: Tue, 4 Dec 2007 18:29:24 -0500 Subject: [Gambas-user] ODBC and NUMERIC problem Message-ID: <69db2c2e0712041529s4c5ddbci73d2a0202627eef3@...627...> Hi everybody, i have a problem with gambas2 and odbc: when a use isql (from unixodbc), I get this result: *select product, price from products - banana ~ 5.00 - orange ~ 7.00 - apple ~ 5.00 but, when a use gambas (from the example), I get this result: *select product, price from products - banana ~ 234235 - orange ~ 234238 - apple ~ 234241 i'm doing something wrong or its a bug? ___________ Gambas 1.9.91 os: Opensuse 10.3 odbc: unixODBC 2.2.12 driver odbc: libOdbcFb32.so V2.0 (Beta 02.00.00.0144) format of "PRICE": NUMERIC(8,2) * * Thanks in advance -- Edward Sucno Quiroz From ronstk at ...239... Wed Dec 5 00:48:21 2007 From: ronstk at ...239... (ron) Date: Wed, 5 Dec 2007 00:48:21 +0100 Subject: [Gambas-user] About the Gambas article In-Reply-To: <200712042144.06234.gambas@...1...> References: <200712042144.06234.gambas@...1...> Message-ID: <200712050048.21771.ronstk@...239...> On Tuesday 04 December 2007 21:44, Benoit Minisini wrote: > Apparently, OSNews is not really interested by the article: > > I have submitted the article the 14 Nov. Having no answer from them, I wrote > them again, and I finally got an answer from the "managing editor" telling me > that the article is accepted, but that it needs a little work before being > published. > > Seeing nothing since, I wrote him again last sunday (2 dec), but didn't get > any answer. > > So, now, I'm looking for another place where this article could be submitted: > does anyone have some ideas? > /. , are you directly /.-ted :) zdnet, Linux Magazine Technology Channels. Awards ? Databases ? Datacenters ? Embedded ? Gear ? Hardware ? HPC ? Legal ? Networking ? Security ? Software ? Software Development ... http://www.linux-mag.com Linux Magazine Online Reports, news and reviews, providing practical, hands-on information for Linux professionals. http://www.linux-magazine.com Beginners: Learn Linux (Linux Reviews) A beginners guide to Linux for those with little or no computer experience. http://linuxreviews.org LinuxPlanet - Reviews - DistributionWatch Review: Linux-Mandrake ... Is Linux-Mandrake 7.0 the perfect Linux distribution? Not quite--but it comes closer than than other to date. We review the latest version of this ... http://linuxplanet.com GNU/Linux DVD Player Review Reviews. Jon takes a look at Xine, VideoLAN Client, MPlayer and Ogle?four GNU/Linux DVD playback applications. Playing DVDs under GNU/Linux has not had the ... http://www.linuxjournal.com Ron PS shame to OSNews if they don't response In fact google for linux reviews will show some sites. From simonart.dominique at ...11... Wed Dec 5 01:27:10 2007 From: simonart.dominique at ...11... (Dominique SIMONART) Date: Wed, 05 Dec 2007 01:27:10 +0100 Subject: [Gambas-user] ToggleButton In-Reply-To: <200712041955.05556.ronstk@...239...> References: <47556AF4.6090109@...11...> <200712041606.28125.rospolosco@...152...> <200712041955.05556.ronstk@...239...> Message-ID: <4755F05E.8080003@...11...> ron a ?crit : > On Tuesday 04 December 2007 16:06, Stefano Palmeri wrote: > >> Alle 15:57, marted? 4 dicembre 2007, Dominique SIMONART ha scritto: >> >>> Hi everybody, >>> >>> How can I force a togglebutton to be ON by program? >>> >>> an exemple: a program could accept Reading, Updating and Erasing modes >>> I associate these modes with 3 togglebuttons and I want the program >>> start with the Reading mode. All is OK except the togglebutton is not ON. >>> I search for something like Checked, but I cannot found anything similar >>> in the properties. >>> >>> Thank for your help >>> Dominique Simonart >>> >>> >> In properties set Value = True >> >> Stefano >> > > Dominique, you can do it also in the Form_Open code. > But take care the code related to the actual pressing that > button is also executed at that moment. > > This can be used to update other related controls which are > not (pre)initialized by setting the property in design mode, > i.e. a list/column-view with items. > > To prevent this executing you can lock the events. > > Ron > > Thanks Ron, Nice to know that, but that's not the case here. I just hope to remember it at the right moment! :) Dominique From ariefbayu at ...626... Wed Dec 5 03:00:56 2007 From: ariefbayu at ...626... (Arief Bayu Purwanto) Date: Wed, 5 Dec 2007 09:00:56 +0700 Subject: [Gambas-user] Finally Gambas got "SendKeys" In-Reply-To: <200712042130.11333.gambas@...1...> References: <200712042125.14248.gambas@...1...> <200712042130.11333.gambas@...1...> Message-ID: <976ad9050712041800n6ac25fe5jea98f6372243e7b4@...627...> Hi there, I try to send F12 to lauch yakuake, but it couldn't launch it. I try it with console: ?Desktop.SendKeys(Key.F12) No return value 4155 ?Desktop.SendKeys("F12") No return value F12 ?Desktop.SendKeys(F12) Unknown symbol Did I do something wrong? Or, SendKeys only able to send normal character, not function keys? On 12/5/07, Benoit Minisini wrote: > > On mardi 4 d?cembre 2007, Benoit Minisini wrote: > > Hi, > > > > The last revision includes an "intelligent" implementation of > > Desktop.SendKeys, that allows to send any key to the window having the > > focus. > > > > What is sent internally are keyboard codes, and so this method tries to > map > > strings to this keycodes, by searching which modifier keys must apply to > -----------> these > > enter the key. > --> get the right key. > > > > For example, on a french keyboard, sending "@" needs actually a press on > a > > modifier key (ALT-GR, which of course does not have this name on X11, > > otherwise things would have been too simple...). > > > > Well, this is why this function is "intelligent". I invite you to check > > this function or your own keyboard, especially if it not a french > layout, > -----------------------------------------------------> is > > and tell me the result... > > > > Regards, > > -- > Benoit Minisini > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: The Future of Linux Business White Paper > from Novell. From the desktop to the data center, Linux is going > mainstream. Let it simplify your IT future. > http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > -- Daiguren Hy?rinmaru From gambas at ...1... Wed Dec 5 09:50:02 2007 From: gambas at ...1... (Benoit Minisini) Date: Wed, 5 Dec 2007 09:50:02 +0100 Subject: [Gambas-user] Finally Gambas got "SendKeys" In-Reply-To: <976ad9050712041800n6ac25fe5jea98f6372243e7b4@...627...> References: <200712042125.14248.gambas@...1...> <200712042130.11333.gambas@...1...> <976ad9050712041800n6ac25fe5jea98f6372243e7b4@...627...> Message-ID: <200712050950.02620.gambas@...1...> On mercredi 5 d?cembre 2007, Arief Bayu Purwanto wrote: > Hi there, > I try to send F12 to lauch yakuake, but it couldn't launch it. > > I try it with console: > > ?Desktop.SendKeys(Key.F12) > No return value > 4155 > ?Desktop.SendKeys("F12") > No return value > F12 > ?Desktop.SendKeys(F12) > Unknown symbol > > Did I do something wrong? Yes, a lot. Desktop.SendKeys is not a function to be used in the console. > Or, SendKeys only able to send normal character, not function keys? > You must read the documentation of the function on the wiki first. Anyway, try Desktop.SendKeys("[F12]"). -- Benoit Minisini From gambas at ...1... Wed Dec 5 09:51:29 2007 From: gambas at ...1... (Benoit Minisini) Date: Wed, 5 Dec 2007 09:51:29 +0100 Subject: [Gambas-user] About the Gambas article In-Reply-To: <200712050048.21771.ronstk@...239...> References: <200712042144.06234.gambas@...1...> <200712050048.21771.ronstk@...239...> Message-ID: <200712050951.29962.gambas@...1...> On mercredi 5 d?cembre 2007, ron wrote: > On Tuesday 04 December 2007 21:44, Benoit Minisini wrote: > > Apparently, OSNews is not really interested by the article: > > > > I have submitted the article the 14 Nov. Having no answer from them, I > > wrote them again, and I finally got an answer from the "managing editor" > > telling me that the article is accepted, but that it needs a little work > > before being published. > > > > Seeing nothing since, I wrote him again last sunday (2 dec), but didn't > > get any answer. > > > > So, now, I'm looking for another place where this article could be > > submitted: does anyone have some ideas? > > /. , are you directly /.-ted :) > > > zdnet, > > > Linux Magazine > Technology Channels. Awards ? Databases ? Datacenters ? Embedded ? Gear ? > Hardware ? HPC ? Legal ? Networking ? Security ? Software ? Software > Development ... http://www.linux-mag.com > > Linux Magazine Online > Reports, news and reviews, providing practical, hands-on information for > Linux professionals. http://www.linux-magazine.com > > Beginners: Learn Linux (Linux Reviews) > A beginners guide to Linux for those with little or no computer experience. > http://linuxreviews.org > > LinuxPlanet - Reviews - DistributionWatch Review: Linux-Mandrake ... > Is Linux-Mandrake 7.0 the perfect Linux distribution? Not quite--but it > comes closer than than other to date. We review the latest version of this > ... http://linuxplanet.com > > GNU/Linux DVD Player Review > Reviews. Jon takes a look at Xine, VideoLAN Client, MPlayer and Ogle?four > GNU/Linux DVD playback applications. Playing DVDs under GNU/Linux has not > had the ... http://www.linuxjournal.com > > Ron > > PS shame to OSNews if they don't response > In fact google for linux reviews will show some sites. > How do you submit articles to /. ? It was not clear on their website... -- Benoit Minisini From ariefbayu at ...626... Wed Dec 5 09:59:32 2007 From: ariefbayu at ...626... (Arief Bayu Purwanto) Date: Wed, 5 Dec 2007 15:59:32 +0700 Subject: [Gambas-user] Finally Gambas got "SendKeys" In-Reply-To: <200712050950.02620.gambas@...1...> References: <200712042125.14248.gambas@...1...> <200712042130.11333.gambas@...1...> <976ad9050712041800n6ac25fe5jea98f6372243e7b4@...627...> <200712050950.02620.gambas@...1...> Message-ID: <976ad9050712050059i2325d0b6u754bfb689f4f3f42@...627...> On 12/5/07, Benoit Minisini wrote: > > On mercredi 5 d?cembre 2007, Arief Bayu Purwanto wrote: > > Hi there, > > I try to send F12 to lauch yakuake, but it couldn't launch it. > > > > I try it with console: > > > > ?Desktop.SendKeys(Key.F12) > > No return value > > 4155 > > ?Desktop.SendKeys("F12") > > No return value > > F12 > > ?Desktop.SendKeys(F12) > > Unknown symbol > > > > Did I do something wrong? > > Yes, a lot. Desktop.SendKeys is not a function to be used in the console. Ah, i see. > Or, SendKeys only able to send normal character, not function keys? > > > > You must read the documentation of the function on the wiki first. > > Anyway, try Desktop.SendKeys("[F12]"). Thanks for the info, I'll read the wiki. -- > Benoit Minisini > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: The Future of Linux Business White Paper > from Novell. From the desktop to the data center, Linux is going > mainstream. Let it simplify your IT future. > http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > -- Daiguren Hy?rinmaru From ariefbayu at ...626... Wed Dec 5 10:01:49 2007 From: ariefbayu at ...626... (Arief Bayu Purwanto) Date: Wed, 5 Dec 2007 16:01:49 +0700 Subject: [Gambas-user] Finally Gambas got "SendKeys" In-Reply-To: <200712050950.02620.gambas@...1...> References: <200712042125.14248.gambas@...1...> <200712042130.11333.gambas@...1...> <976ad9050712041800n6ac25fe5jea98f6372243e7b4@...627...> <200712050950.02620.gambas@...1...> Message-ID: <976ad9050712050101r3bf44f85ndc68403f337a3ad2@...627...> On 12/5/07, Benoit Minisini wrote: > > On mercredi 5 d?cembre 2007, Arief Bayu Purwanto wrote: > > Hi there, > > I try to send F12 to lauch yakuake, but it couldn't launch it. > > > > I try it with console: > > > > ?Desktop.SendKeys(Key.F12) > > No return value > > 4155 > > ?Desktop.SendKeys("F12") > > No return value > > F12 > > ?Desktop.SendKeys(F12) > > Unknown symbol > > > > Did I do something wrong? > > Yes, a lot. Desktop.SendKeys is not a function to be used in the console. Btw, I can execute : ?Desktop.SendKeys("[F12]") in console, and launch yakuake window ;) > Or, SendKeys only able to send normal character, not function keys? > > > > You must read the documentation of the function on the wiki first. > > Anyway, try Desktop.SendKeys("[F12]"). > > -- > Benoit Minisini > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: The Future of Linux Business White Paper > from Novell. From the desktop to the data center, Linux is going > mainstream. Let it simplify your IT future. > http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > -- Daiguren Hy?rinmaru From andrea_bortolan at ...325... Wed Dec 5 10:23:36 2007 From: andrea_bortolan at ...325... (Andrea Bortolan) Date: Wed, 5 Dec 2007 09:23:36 +0000 (GMT) Subject: [Gambas-user] ODBC and NUMERIC problem Message-ID: <549281.31112.qm@...1808...> Hi, can you please provide me also the SQL trace taken running the query in isql and a second trace running the same query from the Gambas program? You can enable it using the ODBCConfig tool, in the Advance tab flag the trace. What DB are you connecting to ? Thanks, Andrea. ----- Messaggio originale ----- Da: esucno esucno A: gambas-user at lists.sourceforge.net Inviato: Mercoled? 5 dicembre 2007, 0:29:24 Oggetto: [Gambas-user] ODBC and NUMERIC problem Hi everybody, i have a problem with gambas2 and odbc: when a use isql (from unixodbc), I get this result: *select product, price from products - banana ~ 5.00 - orange ~ 7.00 - apple ~ 5.00 but, when a use gambas (from the example), I get this result: *select product, price from products - banana ~ 234235 - orange ~ 234238 - apple ~ 234241 i'm doing something wrong or its a bug? ___________ Gambas 1.9.91 os: Opensuse 10.3 odbc: unixODBC 2.2.12 driver odbc: libOdbcFb32.so V2.0 (Beta 02.00.00.0144) format of "PRICE": NUMERIC(8,2) * * Thanks in advance -- Edward Sucno Quiroz ------------------------------------------------------------------------- SF.Net email is sponsored by: The Future of Linux Business White Paper from Novell. From the desktop to the data center, Linux is going mainstream. Let it simplify your IT future. http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 _______________________________________________ Gambas-user mailing list Gambas-user at lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user ___________________________________ L'email della prossima generazione? Puoi averla con la nuova Yahoo! Mail: http://it.docs.yahoo.com/nowyoucan.html From dcamposf at ...626... Wed Dec 5 11:10:41 2007 From: dcamposf at ...626... (Daniel Campos) Date: Wed, 5 Dec 2007 11:10:41 +0100 Subject: [Gambas-user] About the Gambas article In-Reply-To: <200712050951.29962.gambas@...1...> References: <200712042144.06234.gambas@...1...> <200712050048.21771.ronstk@...239...> <200712050951.29962.gambas@...1...> Message-ID: <7259b5ae0712050210pdf3a4j77444bded9d4c282@...627...> May be Linux Magazine: http://linux-mag.com/ About Slashdot, just use the form to suggest an article: http://slashdot.org/submit.pl Daniel 2007/12/5, Benoit Minisini : > On mercredi 5 d?cembre 2007, ron wrote: > > On Tuesday 04 December 2007 21:44, Benoit Minisini wrote: > > > Apparently, OSNews is not really interested by the article: > > > > > > I have submitted the article the 14 Nov. Having no answer from them, I > > > wrote them again, and I finally got an answer from the "managing editor" > > > telling me that the article is accepted, but that it needs a little work > > > before being published. > > > > > > Seeing nothing since, I wrote him again last sunday (2 dec), but didn't > > > get any answer. > > > > > > So, now, I'm looking for another place where this article could be > > > submitted: does anyone have some ideas? > > > > /. , are you directly /.-ted :) > > > > > > zdnet, > > > > > > Linux Magazine > > Technology Channels. Awards ? Databases ? Datacenters ? Embedded ? Gear ? > > Hardware ? HPC ? Legal ? Networking ? Security ? Software ? Software > > Development ... http://www.linux-mag.com > > > > Linux Magazine Online > > Reports, news and reviews, providing practical, hands-on information for > > Linux professionals. http://www.linux-magazine.com > > > > Beginners: Learn Linux (Linux Reviews) > > A beginners guide to Linux for those with little or no computer experience. > > http://linuxreviews.org > > > > LinuxPlanet - Reviews - DistributionWatch Review: Linux-Mandrake ... > > Is Linux-Mandrake 7.0 the perfect Linux distribution? Not quite--but it > > comes closer than than other to date. We review the latest version of this > > ... http://linuxplanet.com > > > > GNU/Linux DVD Player Review > > Reviews. Jon takes a look at Xine, VideoLAN Client, MPlayer and Ogle?four > > GNU/Linux DVD playback applications. Playing DVDs under GNU/Linux has not > > had the ... http://www.linuxjournal.com > > > > Ron > > > > PS shame to OSNews if they don't response > > In fact google for linux reviews will show some sites. > > > > How do you submit articles to /. ? It was not clear on their website... > > -- > Benoit Minisini > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: The Future of Linux Business White Paper > from Novell. From the desktop to the data center, Linux is going > mainstream. Let it simplify your IT future. > http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > From david_villalobos_c at ...43... Wed Dec 5 13:50:10 2007 From: david_villalobos_c at ...43... (David Villalobos Cambronero) Date: Wed, 5 Dec 2007 04:50:10 -0800 (PST) Subject: [Gambas-user] Behavoir in Font property Message-ID: <800971.28907.qm@...1667...> Hi, Just for update. The problem was not Gambas related, but QT. I tried to change the Font Familly with qtconfig but the result of Application.Font.Name still being Sans. I could modify the Font by editing the Desktop theme in KDE Preferences. Now, everything is normal. Regards. David ----- Original Message ---- From: David Villalobos Cambronero To: mailing list for gambas users Sent: Wednesday, November 28, 2007 6:30:06 AM Subject: Re: [Gambas-user] Behavoir in Font property Hi, great!!!! I'll try and tell you. ----- Original Message ---- From: Benoit Minisini To: mailing list for gambas users Sent: Wednesday, November 28, 2007 6:17:37 AM Subject: Re: [Gambas-user] Behavoir in Font property On mercredi 28 novembre 2007, David Villalobos Cambronero wrote: > Hi, here are the results: > > ?Application.Font > (Font 0x84ca0b8) > > ?Application.Font.Name > Sans > > Regards > It is what I thought: the desktop font is "Sans", and "Sans" is not in the font list you sent me. So the font selector takes the first one of the list... Now you must find why on your system the Qt desktop font is "Sans", and why "Sans" seems to not exist on your system! You can use the qtconfig program to define the default Qt font if you does not use KDE. Regards, -- Benoit Minisini ------------------------------------------------------------------------- SF.Net email is sponsored by: The Future of Linux Business White Paper from Novell. From the desktop to the data center, Linux is going mainstream. Let it simplify your IT future. http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 _______________________________________________ Gambas-user mailing list Gambas-user at lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user Be a better pen pal. Text or chat with friends inside Yahoo! Mail. See how. ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ From david_villalobos_c at ...43... Wed Dec 5 13:55:12 2007 From: david_villalobos_c at ...43... (David Villalobos Cambronero) Date: Wed, 5 Dec 2007 04:55:12 -0800 (PST) Subject: [Gambas-user] ToolTip in WebBrowser Message-ID: <585316.52397.qm@...1657...> Hi, Yes, you are right, why use a ToolTip in a Webpage, I just want to be clear if this was a bug. But anyway, what I want to show wasn't a webpage, it was a HTML report, so, I want to add a ToolTip: "Rigth click to print", or somethig like that. David ----- Original Message ---- From: Benoit Minisini To: mailing list for gambas users Sent: Friday, November 30, 2007 3:27:30 PM Subject: Re: [Gambas-user] ToolTip in WebBrowser On mardi 13 novembre 2007, David Villalobos Cambronero wrote: > Hi all, > > I found a problem with the ToolTip in the WebBrowser, in the > executition time it is not shown. > > Can someone validate? > > Attach is an example. > > > Best regards. > > David > Actually it works only of the border of the control, so I think that the KDE HTML widget put some other widgets inside its frame, and that other widgets don't have tooltips. Anyway, why putting a tooltip on something that will display a web page? -- Benoit Minisini ------------------------------------------------------------------------- SF.Net email is sponsored by: The Future of Linux Business White Paper from Novell. From the desktop to the data center, Linux is going mainstream. Let it simplify your IT future. http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 _______________________________________________ Gambas-user mailing list Gambas-user at lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ From sourceforge-raindog2 at ...94... Wed Dec 5 15:07:12 2007 From: sourceforge-raindog2 at ...94... (Rob) Date: Wed, 5 Dec 2007 09:07:12 -0500 Subject: [Gambas-user] About the Gambas article In-Reply-To: <7259b5ae0712050210pdf3a4j77444bded9d4c282@...627...> References: <200712042144.06234.gambas@...1...> <200712050951.29962.gambas@...1...> <7259b5ae0712050210pdf3a4j77444bded9d4c282@...627...> Message-ID: <200712050907.13409.sourceforge-raindog2@...94...> On Wednesday 05 December 2007 05:10, Daniel Campos wrote: > About Slashdot, just use the form to suggest an article: > http://slashdot.org/submit.pl Looks like Linux.com has a story submission form too. http://www.linux.com/submit Rob From gambas at ...1... Wed Dec 5 15:42:48 2007 From: gambas at ...1... (Benoit Minisini) Date: Wed, 5 Dec 2007 15:42:48 +0100 Subject: [Gambas-user] About the Gambas article In-Reply-To: <200712050907.13409.sourceforge-raindog2@...94...> References: <200712042144.06234.gambas@...1...> <7259b5ae0712050210pdf3a4j77444bded9d4c282@...627...> <200712050907.13409.sourceforge-raindog2@...94...> Message-ID: <200712051542.48833.gambas@...1...> On mercredi 5 d?cembre 2007, Rob wrote: > On Wednesday 05 December 2007 05:10, Daniel Campos wrote: > > About Slashdot, just use the form to suggest an article: > > http://slashdot.org/submit.pl > > Looks like Linux.com has a story submission form too. > > http://www.linux.com/submit > > Rob > Apparently slashdot does not take full articles. linux.com does, but I don't know if this is the kind of article they are interested in - I mean, is it a news site read by developers? -- Benoit Minisini From dcamposf at ...626... Wed Dec 5 17:13:27 2007 From: dcamposf at ...626... (Daniel Campos) Date: Wed, 5 Dec 2007 17:13:27 +0100 Subject: [Gambas-user] About the Gambas article In-Reply-To: <200712051542.48833.gambas@...1...> References: <200712042144.06234.gambas@...1...> <7259b5ae0712050210pdf3a4j77444bded9d4c282@...627...> <200712050907.13409.sourceforge-raindog2@...94...> <200712051542.48833.gambas@...1...> Message-ID: <7259b5ae0712050813h528f432ex109a020879711493@...627...> > > Apparently slashdot does not take full articles. > The idea of slashdot is not to take full articles, but to link them, so people can read a brief resume in the news and go directly to gambasdoc.org to read it, not bad I think, that way they can play with the Wiki and see a gambas CGI in action :-) From gambas at ...1... Wed Dec 5 19:16:28 2007 From: gambas at ...1... (Benoit Minisini) Date: Wed, 5 Dec 2007 19:16:28 +0100 Subject: [Gambas-user] About the Gambas article In-Reply-To: <7259b5ae0712050813h528f432ex109a020879711493@...627...> References: <200712042144.06234.gambas@...1...> <200712051542.48833.gambas@...1...> <7259b5ae0712050813h528f432ex109a020879711493@...627...> Message-ID: <200712051916.28526.gambas@...1...> On mercredi 5 d?cembre 2007, Daniel Campos wrote: > > Apparently slashdot does not take full articles. > > The idea of slashdot is not to take full articles, but to link them, > so people can read a brief resume in the news and go directly to > gambasdoc.org to read it, not bad I think, that way they can play with > the Wiki and see a gambas CGI in action :-) > Let's go on slashdot... -- Benoit Minisini From nando_f at ...951... Wed Dec 5 20:09:11 2007 From: nando_f at ...951... (nando) Date: Wed, 5 Dec 2007 14:09:11 -0500 Subject: [Gambas-user] ODBC and NUMERIC problem In-Reply-To: <549281.31112.qm@...1808...> References: <549281.31112.qm@...1808...> Message-ID: <20071205190122.M71328@...951...> I'd like to give my personal opinion here. When using writing code dealing with money and the variable used in Gambas is FLOAT, you will have problem with pennies. FLOAT does not represent money properly. For example $ 2.33 is not 2.33 when saved as a float because floating point binary cannot represent many fractional values exactly. I always use INTEGER and store money as cents, not dollars and cents. I know many that are doing this the same way. For money, the precision and exactness is non better. So then, DIM i AS INTEGER i = 233 'this is 233 cents You will never have problems in code. In MySQL, use INT, not Numeric, not anything else. When you have to display values, use FORMAT with i/100. to make it a float for visual representation. Start now, and you will never have problems. You will always know your data within the program is exact and the match will be exactly correct. -Fernando ---------- Original Message ----------- From: Andrea Bortolan To: mailing list for gambas users Sent: Wed, 5 Dec 2007 09:23:36 +0000 (GMT) Subject: Re: [Gambas-user] ODBC and NUMERIC problem > Hi, > can you please provide me also the SQL trace taken running the query in isql and > a second trace running the same query from the Gambas program? You can enable > it using the ODBCConfig tool, in the Advance tab flag the trace. What DB are you > connecting to ? > > Thanks, Andrea. > > ----- Messaggio originale ----- > Da: esucno esucno > A: gambas-user at lists.sourceforge.net > Inviato: Mercoled? 5 dicembre 2007, 0:29:24 > Oggetto: [Gambas-user] ODBC and NUMERIC problem > > Hi everybody, > > i have a problem with gambas2 and odbc: > > when a use isql (from unixodbc), I get this result: > > *select product, price from products > - banana ~ 5.00 > - orange ~ 7.00 > - apple ~ 5.00 > > but, when a use gambas (from the example), I get this result: > > *select product, price from products > - banana ~ 234235 > - orange ~ 234238 > - apple ~ 234241 > > i'm doing something wrong or its a bug? > > ___________ > Gambas 1.9.91 > os: Opensuse 10.3 > odbc: unixODBC 2.2.12 > driver odbc: libOdbcFb32.so V2.0 (Beta 02.00.00.0144) > format of "PRICE": NUMERIC(8,2) > * > * > Thanks in advance > > -- > Edward Sucno Quiroz > ------------------------------------------------------------------------- > SF.Net email is sponsored by: The Future of Linux Business White Paper > from Novell. From the desktop to the data center, Linux is going > mainstream. Let it simplify your IT future. > http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > > ___________________________________ > L'email della prossima generazione? Puoi averla con la nuova Yahoo! Mail: http://it.docs.yahoo.com/nowyoucan.html > ------------------------------------------------------------------------- > SF.Net email is sponsored by: The Future of Linux Business White Paper > from Novell. From the desktop to the data center, Linux is going > mainstream. Let it simplify your IT future. > http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user ------- End of Original Message ------- From ronstk at ...239... Wed Dec 5 20:51:16 2007 From: ronstk at ...239... (ron) Date: Wed, 5 Dec 2007 20:51:16 +0100 Subject: [Gambas-user] About the Gambas article In-Reply-To: <200712051916.28526.gambas@...1...> References: <200712042144.06234.gambas@...1...> <7259b5ae0712050813h528f432ex109a020879711493@...627...> <200712051916.28526.gambas@...1...> Message-ID: <200712052051.16974.ronstk@...239...> On Wednesday 05 December 2007 19:16, Benoit Minisini wrote: > Let's go on slashdot... > > -- > Benoit Minisini > :-) :-) :-) Ron From dcamposf at ...626... Wed Dec 5 21:12:42 2007 From: dcamposf at ...626... (Daniel Campos) Date: Wed, 5 Dec 2007 21:12:42 +0100 Subject: [Gambas-user] ODBC and NUMERIC problem In-Reply-To: <20071205190122.M71328@...951...> References: <549281.31112.qm@...1808...> <20071205190122.M71328@...951...> Message-ID: <7259b5ae0712051212l3fc4c4d7l6d171d1b1fd02c1e@...627...> Yes nando, you're quite right, it is quite dangerous to use float values for currency, just adding a decimmal coma for the human final interface is quite better 2007/12/5, nando : > I'd like to give my personal opinion here. > When using writing code dealing with money and > the variable used in Gambas is FLOAT, you will > have problem with pennies. FLOAT does not > represent money properly. > > For example $ 2.33 is not 2.33 when saved as a float > because floating point binary cannot represent many > fractional values exactly. > > I always use INTEGER and store money as cents, not dollars and cents. > I know many that are doing this the same way. > > For money, the precision and exactness is non better. > > So then, > > DIM i AS INTEGER > i = 233 'this is 233 cents > > You will never have problems in code. > > In MySQL, use INT, not Numeric, not anything else. > > When you have to display values, use FORMAT with i/100. to make it a float > for visual representation. > > Start now, and you will never have problems. > You will always know your data within the program is exact > and the match will be exactly correct. > > -Fernando > > > ---------- Original Message ----------- > From: Andrea Bortolan > To: mailing list for gambas users > Sent: Wed, 5 Dec 2007 09:23:36 +0000 (GMT) > Subject: Re: [Gambas-user] ODBC and NUMERIC problem > > > Hi, > > can you please provide me also the SQL trace taken running the query in isql and > > a second trace running the same query from the Gambas program? You can enable > > it using the ODBCConfig tool, in the Advance tab flag the trace. What DB are you > > connecting to ? > > > > Thanks, Andrea. > > > > ----- Messaggio originale ----- > > Da: esucno esucno > > A: gambas-user at lists.sourceforge.net > > Inviato: Mercoled? 5 dicembre 2007, 0:29:24 > > Oggetto: [Gambas-user] ODBC and NUMERIC problem > > > > Hi everybody, > > > > i have a problem with gambas2 and odbc: > > > > when a use isql (from unixodbc), I get this result: > > > > *select product, price from products > > - banana ~ 5.00 > > - orange ~ 7.00 > > - apple ~ 5.00 > > > > but, when a use gambas (from the example), I get this result: > > > > *select product, price from products > > - banana ~ 234235 > > - orange ~ 234238 > > - apple ~ 234241 > > > > i'm doing something wrong or its a bug? > > > > ___________ > > Gambas 1.9.91 > > os: Opensuse 10.3 > > odbc: unixODBC 2.2.12 > > driver odbc: libOdbcFb32.so V2.0 (Beta 02.00.00.0144) > > format of "PRICE": NUMERIC(8,2) > > * > > * > > Thanks in advance > > > > -- > > Edward Sucno Quiroz > > ------------------------------------------------------------------------- > > SF.Net email is sponsored by: The Future of Linux Business White Paper > > from Novell. From the desktop to the data center, Linux is going > > mainstream. Let it simplify your IT future. > > http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 > > _______________________________________________ > > Gambas-user mailing list > > Gambas-user at lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/gambas-user > > > > ___________________________________ > > L'email della prossima generazione? Puoi averla con la nuova Yahoo! Mail: > http://it.docs.yahoo.com/nowyoucan.html > > ------------------------------------------------------------------------- > > SF.Net email is sponsored by: The Future of Linux Business White Paper > > from Novell. From the desktop to the data center, Linux is going > > mainstream. Let it simplify your IT future. > > http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 > > _______________________________________________ > > Gambas-user mailing list > > Gambas-user at lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/gambas-user > ------- End of Original Message ------- > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: The Future of Linux Business White Paper > from Novell. From the desktop to the data center, Linux is going > mainstream. Let it simplify your IT future. > http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > From esucno at ...626... Wed Dec 5 23:24:03 2007 From: esucno at ...626... (esucno esucno) Date: Wed, 5 Dec 2007 17:24:03 -0500 Subject: [Gambas-user] ODBC and NUMERIC problem Message-ID: <69db2c2e0712051424p1a5381e0n56bc1749c4cb2d06@...627...> > Message: 2 > Date: Wed, 5 Dec 2007 09:23:36 +0000 (GMT) > From: Andrea Bortolan > Subject: Re: [Gambas-user] ODBC and NUMERIC problem > To: mailing list for gambas users > Message-ID: <549281.31112.qm at ...1808...> > Content-Type: text/plain; charset=utf-8 > > Hi, > can you please provide me also the SQL trace taken running the query in > isql and a second trace running the same query from the Gambas program? > You can enable it using the ODBCConfig tool, in the Advance tab flag the > trace. > What DB are you connecting to ? > > Thanks, Andrea. > > here is it : http://files-upload.com/files/661705/SQL.LOG.tar.gz DataBase: FireBird 2.0.3 thn for help me :) -- Edward Sucno Quiroz From epileg at ...626... Thu Dec 6 12:21:16 2007 From: epileg at ...626... (=?UTF-8?B?RXDDrWxlZw==?=) Date: Thu, 06 Dec 2007 12:21:16 +0100 Subject: [Gambas-user] Problem with SVN [858] Message-ID: <4757DB2C.8070205@...626...> From gambas at ...1... Thu Dec 6 12:25:41 2007 From: gambas at ...1... (Benoit Minisini) Date: Thu, 6 Dec 2007 12:25:41 +0100 Subject: [Gambas-user] Problem with SVN [858] In-Reply-To: <4757DB2C.8070205@...626...> References: <4757DB2C.8070205@...626...> Message-ID: <200712061225.42168.gambas@...1...> On jeudi 6 d?cembre 2007, Ep?leg wrote: > From SVN [858] in an Ubuntu Gutsy (7.10), when I do "configure -C" got > "gb.desktop" disabled and the IDE do not start and returns dis error: > > epileg at ...1008...:~$ gambas2 > ERROR: #27: Cannot load component 'gb.desktop': cannot find library file > epileg at ...1008...:~$ > > What can I do? > > thanks, > Ep?leg. > > P.D. Before the SVN [858] version, the "gb.qte" already appeared disabled > too, so if somebody can help me to solve it... > Now gb.desktop needs a X11 library named libXtst. What is the output of './configure'? As for gb.qte, this component needs the QT/Embedded libraries. -- Benoit Minisini From gambas at ...1... Thu Dec 6 12:30:45 2007 From: gambas at ...1... (Benoit Minisini) Date: Thu, 6 Dec 2007 12:30:45 +0100 Subject: [Gambas-user] About the Gambas article In-Reply-To: <200712052051.16974.ronstk@...239...> References: <200712042144.06234.gambas@...1...> <200712051916.28526.gambas@...1...> <200712052051.16974.ronstk@...239...> Message-ID: <200712061230.45298.gambas@...1...> On mercredi 5 d?cembre 2007, ron wrote: > On Wednesday 05 December 2007 19:16, Benoit Minisini wrote: > > Let's go on slashdot... > > > > -- > > Benoit Minisini > > > :-) :-) :-) > > Ron > I wrote a little article yesterday, with a link to the main one on the wiki. Let's see if it will appear now... -- Benoit Minisini From david_villalobos_c at ...43... Thu Dec 6 13:40:21 2007 From: david_villalobos_c at ...43... (David Villalobos Cambronero) Date: Thu, 6 Dec 2007 04:40:21 -0800 (PST) Subject: [Gambas-user] Installation on Mandriva 2008 Message-ID: <676409.38360.qm@...1656...> Can anyone tell me the repository where I find those packages? Regards David ----- Original Message ---- From: Benoit Minisini To: mailing list for gambas users Sent: Tuesday, November 27, 2007 7:38:39 AM Subject: Re: [Gambas-user] Installation on Mandriva 2008 On mardi 27 novembre 2007, David Villalobos Cambronero wrote: > Well, I use 2007.1 and do not need the contrib pakages, everything is in > the Mandriva DVD (well, not cobra, firebird, and qte pakages) > > My problem is that for 2008 most name pakages have changed and the wiki > help doesn't work. > > I wll like to know the pakage list to compile Gambas on Mandriva 2008, > because I'm plannig to write a manual for Gambas including Instalation and > compilation. > > Hope someone can help... > > Regards > > David > I have updated the wiki with the new package names. I hope I forgot nothing... Regards, -- Benoit Minisini ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Gambas-user mailing list Gambas-user at lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user Be a better pen pal. Text or chat with friends inside Yahoo! Mail. See how. ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs From epileg at ...626... Thu Dec 6 14:55:40 2007 From: epileg at ...626... (=?UTF-8?B?RXDDrWxlZw==?=) Date: Thu, 06 Dec 2007 14:55:40 +0100 Subject: [Gambas-user] Problem with SVN [858] In-Reply-To: <200712061225.42168.gambas@...1...> References: <4757DB2C.8070205@...626...> <200712061225.42168.gambas@...1...> Message-ID: <4757FF5C.5040500@...626...> En/na Benoit Minisini ha escrit: > On jeudi 6 d?cembre 2007, Ep?leg wrote: >> From SVN [858] in an Ubuntu Gutsy (7.10), when I do "configure -C" got >> "gb.desktop" disabled and the IDE do not start and returns dis error: >> >> epileg at ...1008...:~$ gambas2 >> ERROR: #27: Cannot load component 'gb.desktop': cannot find library file >> epileg at ...1008...:~$ >> >> What can I do? >> >> thanks, >> Ep?leg. >> >> P.D. Before the SVN [858] version, the "gb.qte" already appeared disabled >> too, so if somebody can help me to solve it... >> > > Now gb.desktop needs a X11 library named libXtst. What is the output > of './configure'? > > As for gb.qte, this component needs the QT/Embedded libraries. > Thanks You For ubuntu users, installing "libxtst-dev" solve "gb.desktop" problem. But for "gb.qte" i don't know which one to install. "qt3-dev-tools-embedded" don't solve this :-/ Best regards, Ep?leg. From gambas at ...1... Thu Dec 6 15:03:24 2007 From: gambas at ...1... (Benoit Minisini) Date: Thu, 6 Dec 2007 15:03:24 +0100 Subject: [Gambas-user] Problem with SVN [858] In-Reply-To: <4757FF5C.5040500@...626...> References: <4757DB2C.8070205@...626...> <200712061225.42168.gambas@...1...> <4757FF5C.5040500@...626...> Message-ID: <200712061503.25106.gambas@...1...> On jeudi 6 d?cembre 2007, Ep?leg wrote: > En/na Benoit Minisini ha escrit: > > On jeudi 6 d?cembre 2007, Ep?leg wrote: > >> From SVN [858] in an Ubuntu Gutsy (7.10), when I do "configure -C" got > >> "gb.desktop" disabled and the IDE do not start and returns dis error: > >> > >> epileg at ...1008...:~$ gambas2 > >> ERROR: #27: Cannot load component 'gb.desktop': cannot find library file > >> epileg at ...1008...:~$ > >> > >> What can I do? > >> > >> thanks, > >> Ep?leg. > >> > >> P.D. Before the SVN [858] version, the "gb.qte" already appeared > >> disabled too, so if somebody can help me to solve it... > > > > Now gb.desktop needs a X11 library named libXtst. What is the output > > of './configure'? > > > > As for gb.qte, this component needs the QT/Embedded libraries. > > Thanks You > > For ubuntu users, installing "libxtst-dev" solve "gb.desktop" problem. > But for "gb.qte" i don't know which one to install. > "qt3-dev-tools-embedded" don't solve this :-/ > > Best regards, > Ep?leg. > I really don't know. On Mandriva, I do not have any package for QT/Embeded, so maybe this is the same for Ubuntu. Regards, -- Benoit Minisini From epileg at ...626... Thu Dec 6 15:09:55 2007 From: epileg at ...626... (=?UTF-8?B?RXDDrWxlZw==?=) Date: Thu, 06 Dec 2007 15:09:55 +0100 Subject: [Gambas-user] Problem with SVN [858] In-Reply-To: <200712061503.25106.gambas@...1...> References: <4757DB2C.8070205@...626...> <200712061225.42168.gambas@...1...> <4757FF5C.5040500@...626...> <200712061503.25106.gambas@...1...> Message-ID: <475802B3.6020500@...626...> En/na Benoit Minisini ha escrit: > On jeudi 6 d?cembre 2007, Ep?leg wrote: >> En/na Benoit Minisini ha escrit: >>> On jeudi 6 d?cembre 2007, Ep?leg wrote: >>>> From SVN [858] in an Ubuntu Gutsy (7.10), when I do "configure -C" got >>>> "gb.desktop" disabled and the IDE do not start and returns dis error: >>>> >>>> epileg at ...1008...:~$ gambas2 >>>> ERROR: #27: Cannot load component 'gb.desktop': cannot find library file >>>> epileg at ...1008...:~$ >>>> >>>> What can I do? >>>> >>>> thanks, >>>> Ep?leg. >>>> >>>> P.D. Before the SVN [858] version, the "gb.qte" already appeared >>>> disabled too, so if somebody can help me to solve it... >>> Now gb.desktop needs a X11 library named libXtst. What is the output >>> of './configure'? >>> >>> As for gb.qte, this component needs the QT/Embedded libraries. >> Thanks You >> >> For ubuntu users, installing "libxtst-dev" solve "gb.desktop" problem. >> But for "gb.qte" i don't know which one to install. >> "qt3-dev-tools-embedded" don't solve this :-/ >> >> Best regards, >> Ep?leg. >> > > I really don't know. On Mandriva, I do not have any package for QT/Embeded, so > maybe this is the same for Ubuntu. > > Regards, > so how do you make gb.qte work correctly in mandriva? which files are necessary to be installed in the system? regards, Ep?leg. From gambas at ...1... Thu Dec 6 15:13:31 2007 From: gambas at ...1... (Benoit Minisini) Date: Thu, 6 Dec 2007 15:13:31 +0100 Subject: [Gambas-user] Problem with SVN [858] In-Reply-To: <475802B3.6020500@...626...> References: <4757DB2C.8070205@...626...> <200712061503.25106.gambas@...1...> <475802B3.6020500@...626...> Message-ID: <200712061513.32123.gambas@...1...> On jeudi 6 d?cembre 2007, Ep?leg wrote: > En/na Benoit Minisini ha escrit: > > On jeudi 6 d?cembre 2007, Ep?leg wrote: > >> En/na Benoit Minisini ha escrit: > >>> On jeudi 6 d?cembre 2007, Ep?leg wrote: > >>>> From SVN [858] in an Ubuntu Gutsy (7.10), when I do "configure -C" got > >>>> "gb.desktop" disabled and the IDE do not start and returns dis error: > >>>> > >>>> epileg at ...1008...:~$ gambas2 > >>>> ERROR: #27: Cannot load component 'gb.desktop': cannot find library > >>>> file epileg at ...1008...:~$ > >>>> > >>>> What can I do? > >>>> > >>>> thanks, > >>>> Ep?leg. > >>>> > >>>> P.D. Before the SVN [858] version, the "gb.qte" already appeared > >>>> disabled too, so if somebody can help me to solve it... > >>> > >>> Now gb.desktop needs a X11 library named libXtst. What is the output > >>> of './configure'? > >>> > >>> As for gb.qte, this component needs the QT/Embedded libraries. > >> > >> Thanks You > >> > >> For ubuntu users, installing "libxtst-dev" solve "gb.desktop" problem. > >> But for "gb.qte" i don't know which one to install. > >> "qt3-dev-tools-embedded" don't solve this :-/ > >> > >> Best regards, > >> Ep?leg. > > > > I really don't know. On Mandriva, I do not have any package for > > QT/Embeded, so maybe this is the same for Ubuntu. > > > > Regards, > > so how do you make gb.qte work correctly in mandriva? which files are > necessary to be installed in the system? > > regards, > Ep?leg. > I don't. I just created false symbolic links having the name of the qte libraries pointing at the qt libraries, to ensure that the sources compile! -- Benoit Minisini From tomas.eroles at ...277... Thu Dec 6 18:01:51 2007 From: tomas.eroles at ...277... (Tomas Eroles i Forner) Date: Thu, 06 Dec 2007 18:01:51 +0100 Subject: [Gambas-user] Doubts about TableView and GridView Message-ID: <1196960511.4981.11.camel@...1787...> Hi all! I want to use a like-table control for an application I'm writing. I used for some time a TableView, but it seems is read only, that is, is impossible to put any value at anywhere (like a spreadsheet). Now, I'm testing the GridView control, and I see is possible to do that, but I can't use column and row titles. Is this like this? That is, is really impossible to write values in a TableView and put titles in a GridView? Thanks in advance. Using Gambas 1.9.33 on a SuSE From gambas at ...1... Thu Dec 6 18:23:31 2007 From: gambas at ...1... (Benoit Minisini) Date: Thu, 6 Dec 2007 18:23:31 +0100 Subject: [Gambas-user] Doubts about TableView and GridView In-Reply-To: <1196960511.4981.11.camel@...1787...> References: <1196960511.4981.11.camel@...1787...> Message-ID: <200712061823.32117.gambas@...1...> On jeudi 6 d?cembre 2007, Tomas Eroles i Forner wrote: > Hi all! > I want to use a like-table control for an application I'm writing. > I used for some time a TableView, but it seems is read only, that is, is > impossible to put any value at anywhere (like a spreadsheet). > Now, I'm testing the GridView control, and I see is possible to do that, > but I can't use column and row titles. > Is this like this? That is, is really impossible to write values in a > TableView and put titles in a GridView? > > Thanks in advance. > > Using Gambas 1.9.33 on a SuSE > > You can use TableView, this is a GridView with edition capacity. I suggest you read the documentation on the wiki, even if it is sparse, and look at the FProjectProperty form inside the IDE source code. Regards, -- Benoit Minisini From gambas at ...1... Thu Dec 6 18:25:34 2007 From: gambas at ...1... (Benoit Minisini) Date: Thu, 6 Dec 2007 18:25:34 +0100 Subject: [Gambas-user] About the Gambas article In-Reply-To: <200712061230.45298.gambas@...1...> References: <200712042144.06234.gambas@...1...> <200712052051.16974.ronstk@...239...> <200712061230.45298.gambas@...1...> Message-ID: <200712061825.34934.gambas@...1...> On jeudi 6 d?cembre 2007, Benoit Minisini wrote: > On mercredi 5 d?cembre 2007, ron wrote: > > On Wednesday 05 December 2007 19:16, Benoit Minisini wrote: > > > Let's go on slashdot... > > > > > > -- > > > Benoit Minisini > > > > > :-) :-) :-) > > > > Ron > > I wrote a little article yesterday, with a link to the main one on the > wiki. Let's see if it will appear now... Apparently no... Is that a plot? :-( -- Benoit Minisini From sourceforge-raindog2 at ...94... Thu Dec 6 19:48:14 2007 From: sourceforge-raindog2 at ...94... (Rob) Date: Thu, 6 Dec 2007 13:48:14 -0500 Subject: [Gambas-user] About the Gambas article In-Reply-To: <200712061825.34934.gambas@...1...> References: <200712042144.06234.gambas@...1...> <200712061230.45298.gambas@...1...> <200712061825.34934.gambas@...1...> Message-ID: <200712061348.14482.sourceforge-raindog2@...94...> On Thursday 06 December 2007 12:25, Benoit Minisini wrote: > > I wrote a little article yesterday, with a link to the main one > > on the wiki. Let's see if it will appear now... > > Apparently no... Is that a plot? :-( Very few Slashdot articles that get submitted make it to the site's headlines. Most apparently languish in the members-only queue (this is how they say it works, but I've never been a member so I don't know) and only if they get a certain amount of interest do they make the main site. You could always submit it to Digg, but Digg is even less developer-centric than Slashdot or OSnews. I think there's a possibility it could appear in the Newsvac headlines on linux.com and newsforge.com for a day, if you wanted to submit it there. But they might see it as a press release, and they don't carry a lot of press releases. Maybe http://linuxpr.com/? I don't know how many sites reference it, but it might get some notice we might not have otherwise gotten. Getting a prominent blogger to notice the imminent release of Gambas 2.0 would probably help, but there's so much more hype about Ajax and other web technologies nowadays that traditional desktop development tends to fly under the radar. Rob From gambas.fr at ...626... Thu Dec 6 21:02:05 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Thu, 6 Dec 2007 21:02:05 +0100 Subject: [Gambas-user] About the Gambas article In-Reply-To: <200712061348.14482.sourceforge-raindog2@...94...> References: <200712042144.06234.gambas@...1...> <200712061825.34934.gambas@...1...> <200712061348.14482.sourceforge-raindog2@...94...> Message-ID: <200712062102.08823.gambas.fr@...626...> Le Thursday 06 December 2007 19:48:14 Rob, vous avez ?crit?: > On Thursday 06 December 2007 12:25, Benoit Minisini wrote: > > > I wrote a little article yesterday, with a link to the main one > > > on the wiki. Let's see if it will appear now... > > > > Apparently no... Is that a plot? :-( > > Very few Slashdot articles that get submitted make it to the site's > headlines. Most apparently languish in the members-only queue (this > is how they say it works, but I've never been a member so I don't > know) and only if they get a certain amount of interest do they make > the main site. > > You could always submit it to Digg, but Digg is even less > developer-centric than Slashdot or OSnews. > > I think there's a possibility it could appear in the Newsvac headlines > on linux.com and newsforge.com for a day, if you wanted to submit it > there. But they might see it as a press release, and they don't > carry a lot of press releases. Maybe http://linuxpr.com/? I don't > know how many sites reference it, but it might get some notice we > might not have otherwise gotten. > > Getting a prominent blogger to notice the imminent release of Gambas > 2.0 would probably help, but there's so much more hype about Ajax and > other web technologies nowadays that traditional desktop development > tends to fly under the radar. > > Rob And in other side this explain the ajax fashion... but ajax, in fact is a pseudo technologie... I don't understand the facination that all people have for that... From ronstk at ...239... Thu Dec 6 21:17:43 2007 From: ronstk at ...239... (ron) Date: Thu, 6 Dec 2007 21:17:43 +0100 Subject: [Gambas-user] About the Gambas article In-Reply-To: <200712062102.08823.gambas.fr@...626...> References: <200712042144.06234.gambas@...1...> <200712061348.14482.sourceforge-raindog2@...94...> <200712062102.08823.gambas.fr@...626...> Message-ID: <200712062117.43184.ronstk@...239...> On Thursday 06 December 2007 21:02, Fabien Bodard wrote: > And in other side this explain the ajax fashion... but ajax, in fact is a > pseudo technologie... In my country is ajax == football team (socker) ajax == cleaning liquid ajax == firefighter equipment product name > I don't understand the facination that all people have for that... > :-) :-) :-) Ron From gambas.fr at ...626... Thu Dec 6 21:23:33 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Thu, 6 Dec 2007 21:23:33 +0100 Subject: [Gambas-user] About the Gambas article In-Reply-To: <200712062117.43184.ronstk@...239...> References: <200712042144.06234.gambas@...1...> <200712062102.08823.gambas.fr@...626...> <200712062117.43184.ronstk@...239...> Message-ID: <200712062123.34400.gambas.fr@...626...> Le Thursday 06 December 2007 21:17:43 ron, vous avez ?crit?: > On Thursday 06 December 2007 21:02, Fabien Bodard wrote: > > And in other side this explain the ajax fashion... but ajax, in fact is a > > pseudo technologie... > > In my country is > ajax == football team (socker) > ajax == cleaning liquid > ajax == firefighter equipment product name > > > I don't understand the facination that all people have for that... > > > :-) :-) :-) > > Ron > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user all exist before ajax.. it just add the ability to callback the server :/ From sourceforge-raindog2 at ...94... Thu Dec 6 22:02:17 2007 From: sourceforge-raindog2 at ...94... (Rob) Date: Thu, 6 Dec 2007 16:02:17 -0500 Subject: [Gambas-user] About the Gambas article In-Reply-To: <200712062102.08823.gambas.fr@...626...> References: <200712042144.06234.gambas@...1...> <200712061348.14482.sourceforge-raindog2@...94...> <200712062102.08823.gambas.fr@...626...> Message-ID: <200712061602.17161.sourceforge-raindog2@...94...> On Thursday 06 December 2007 15:02, Fabien Bodard wrote: > > Getting a prominent blogger to notice the imminent release of > > Gambas 2.0 would probably help, but there's so much more hype > > about Ajax and other web technologies nowadays that traditional > > desktop development tends to fly under the radar. > And in other side this explain the ajax fashion... but ajax, in > fact is a pseudo technologie... I don't understand the facination > that all people have for that... You're right, it's not a language or platform or toolkit, just a buzzword that can refer to a lot of different techniques. But fundamentally, it's a way to make web applications that are usable by people who run any modern OS and are nearly as responsive as desktop applications, without relying on awkward, sometimes incompatible plugins or applets. That's why people are fascinated by it, mostly due to Google's very visible products (if Gmail or Google Maps didn't get their attention, I'm pretty sure Google Docs did.) But the awkwardness you remove by not using Java or Flash comes back to you when you try to write a big system using it, something I still hope to simplify one day using Gambas. I already converted a big Access/VB app to a Perl CGI-based Ajax app by importing the VB forms into Gambas, and writing a framework (which was awkward, slow, and loaded down with one customer's business logic) to convert those forms to XHTML, add Javascript event handlers for each element, populate them from MySQL, and update the data on the server side after each change, transparently to the user. It would also generate PDF, ODT or DOC files of the reports and send them down to the browser. It was a huge pain, but I started it before the term Ajax was coined. There are toolkits available now that can help people a lot when they do that sort of thing. I can convert a VB app to a Gambas app much more easily, but then the client has to commit to a Linux desktop. Maybe they're doing that in Europe, but very few American companies are doing that. A web-based application means they can keep using whatever OS they have and not have to install an app on each user's machine, just send them a bookmark. There are many apps which aren't well-suited for conversion to the web using Ajax, like anything that touches the local machine's hardware (specialized backup/burning, multimedia/games, anything that needs serial or parallel port access or fine control over keyboard input, anything that needs to print directly rather than generating a PDF, etc.) and for those I certainly prefer Gambas over anything else. But for apps that are primarily data entry and calculations, that don't need fancy paper handling or communication with special hardware, I think using Ajax techniques has made the browser a lot more viable as a platform. Rob From gambas.fr at ...626... Thu Dec 6 23:08:08 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Thu, 6 Dec 2007 23:08:08 +0100 Subject: [Gambas-user] About the Gambas article In-Reply-To: <200712061602.17161.sourceforge-raindog2@...94...> References: <200712042144.06234.gambas@...1...> <200712062102.08823.gambas.fr@...626...> <200712061602.17161.sourceforge-raindog2@...94...> Message-ID: <200712062308.09058.gambas.fr@...626...> Le Thursday 06 December 2007 22:02:17 Rob, vous avez ?crit?: > On Thursday 06 December 2007 15:02, Fabien Bodard wrote: > > > Getting a prominent blogger to notice the imminent release of > > > Gambas 2.0 would probably help, but there's so much more hype > > > about Ajax and other web technologies nowadays that traditional > > > desktop development tends to fly under the radar. > > > > And in other side this explain the ajax fashion... but ajax, in > > fact is a pseudo technologie... I don't understand the facination > > that all people have for that... > > You're right, it's not a language or platform or toolkit, just a > buzzword that can refer to a lot of different techniques. But > fundamentally, it's a way to make web applications that are usable by > people who run any modern OS and are nearly as responsive as desktop > applications, without relying on awkward, sometimes incompatible > plugins or applets. > > That's why people are fascinated by it, mostly due to Google's very > visible products (if Gmail or Google Maps didn't get their attention, > I'm pretty sure Google Docs did.) But the awkwardness you remove by > not using Java or Flash comes back to you when you try to write a big > system using it, something I still hope to simplify one day using > Gambas. > > I already converted a big Access/VB app to a Perl CGI-based Ajax app > by importing the VB forms into Gambas, and writing a framework (which > was awkward, slow, and loaded down with one customer's business > logic) to convert those forms to XHTML, add Javascript event handlers > for each element, populate them from MySQL, and update the data on > the server side after each change, transparently to the user. It > would also generate PDF, ODT or DOC files of the reports and send > them down to the browser. It was a huge pain, but I started it > before the term Ajax was coined. There are toolkits available now > that can help people a lot when they do that sort of thing. > > I can convert a VB app to a Gambas app much more easily, but then the > client has to commit to a Linux desktop. Maybe they're doing that in > Europe, but very few American companies are doing that. A web-based > application means they can keep using whatever OS they have and not > have to install an app on each user's machine, just send them a > bookmark. > > There are many apps which aren't well-suited for conversion to the web > using Ajax, like anything that touches the local machine's hardware > (specialized backup/burning, multimedia/games, anything that needs > serial or parallel port access or fine control over keyboard input, > anything that needs to print directly rather than generating a PDF, > etc.) and for those I certainly prefer Gambas over anything else. > But for apps that are primarily data entry and calculations, that > don't need fancy paper handling or communication with special > hardware, I think using Ajax techniques has made the browser a lot > more viable as a platform. > I'm sure you're true... the better will be construct one time, browse everywhere ... > Rob > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user From wig at ...1809... Fri Dec 7 14:22:51 2007 From: wig at ...1809... (wig at ...1809...) Date: Fri, 7 Dec 2007 14:22:51 +0100 (CET) Subject: [Gambas-user] About the Gambas article Message-ID: <61122.81.245.36.122.1197033771.squirrel@...1810...> As I tried to submit news to slashdot once, I noticed the chance to get it published is small: they have a huge offer of ideas and news. It might help to give it the right "Section"; probably they don't see it as news for the frontpage, but it might have more chance on the "developer" page. At least Gambas 1.0 got mentioned at the time: http://developers.slashdot.org/article.pl?sid=04/10/26/142212 I missed the article (or the link to it), I haven't read it but I suppose it is the announcement of Gambas v 2.0. If you submit news about yourself to slashdot, they probably just see it as publicity. It is stronger if someone from outside the project does it. They mostly publish articles that say a little bit more than just "there is a new version of..". Often it sounds more like (just improvisation): "As MS abandons Visual Foxpro, lots of developers have to look for another RAD environment. New projects still have lots of IDE choice outside LAMP, but how to combine good database, low price and maximum freedom? _Remember_ the interesting alternative on Linux: Gambas now reached its 2.0 release; the IDE is made in Gambas itself." (where _Remember_ =link to slashdot 1.0 item) For Gambas it's just important to be mentioned, the context might even talk about other basics, other RAD's etc. And important of course, the link to the site. (but then your site will be down afterwards although Development section might give less stress than the general news section) I do think you deserve to - and should be able to get mentioned on slashdot with the news of the 2.0 release. More exposure (like witness publications of projects realised in Gambas or succesfull migration to Gambas) might attract the attention of Slashdot authors. Maybe a job for gambas-users ... Wim Belgian/Dutch discovering Gambas notes on gambas.noxqs.org From cjro99 at ...67... Fri Dec 7 15:04:15 2007 From: cjro99 at ...67... (javier romero) Date: Fri, 7 Dec 2007 14:04:15 +0000 Subject: [Gambas-user] try to make Ubuntu package with a proyect In-Reply-To: <676409.38360.qm@...1656...> References: <676409.38360.qm@...1656...> Message-ID: I finished a proyect and when i want build a package with there, ubuntu and debian options are enabled and a message saids i need to install "debhelper", i install there and try again but the options steel enabled and gambas not detect i install debhelper. What more i need install? Thanks Javier _________________________________________________________________ Tecnolog?a, moda, motor, viajes,?suscr?bete a nuestros boletines para estar a la ?ltima http://newsletters.msn.com/hm/maintenanceeses.asp?L=ES&C=ES&P=WCMaintenance&Brand=WL&RU=http%3a%2f%2fmail.live.com From sourceforge-raindog2 at ...94... Fri Dec 7 15:23:00 2007 From: sourceforge-raindog2 at ...94... (Rob) Date: Fri, 7 Dec 2007 09:23:00 -0500 Subject: [Gambas-user] About the Gambas article In-Reply-To: <61122.81.245.36.122.1197033771.squirrel@...1810...> References: <61122.81.245.36.122.1197033771.squirrel@...1810...> Message-ID: <200712070923.00552.sourceforge-raindog2@...94...> On Friday 07 December 2007 08:22, wig at ...1809... wrote: > It might help to give it the right "Section"; probably they don't > see it as news for the frontpage, but it might have more chance on > the "developer" page. At least Gambas 1.0 got mentioned at the > time: http://developers.slashdot.org/article.pl?sid=04/10/26/142212 I submitted it to the developer section back then, but it got onto the main page anyway and the site went down for half a day or so. Something to keep in mind (though since we're hosted on Sourceforge, we're kind of at the mercy of their servers' capacity.) Maybe I'll wait a day or two and submit an article referencing my previous one. But I suppose reaching production status for the first time is more compelling news than releasing a 2.0 version, no matter how much better it is now. Rob From cjro99 at ...67... Fri Dec 7 23:50:49 2007 From: cjro99 at ...67... (javier romero) Date: Fri, 7 Dec 2007 22:50:49 +0000 Subject: [Gambas-user] try to make Ubuntu package with a proyect In-Reply-To: References: <676409.38360.qm@...1656...> Message-ID: Finally i can build a ubuntu package with my proyect, but when i try to install this it can not do because a missing reference "gambas2-gb-form-dialog" i try to install this but i can find this package in ubuntu repositories. Javier ---------------------------------------- > From: cjro99 at ...67... > To: gambas-user at lists.sourceforge.net > Date: Fri, 7 Dec 2007 14:04:15 +0000 > Subject: [Gambas-user] try to make Ubuntu package with a proyect > > > I finished a proyect and when i want build a package with there, ubuntu and debian options are enabled and a message saids i need to install "debhelper", i install there and try again but the options steel enabled and gambas not detect i install debhelper. What more i need install? > > Thanks > Javier > _________________________________________________________________ > Tecnolog?a, moda, motor, viajes,?suscr?bete a nuestros boletines para estar a la ?ltima > http://newsletters.msn.com/hm/maintenanceeses.asp?L=ES&C=ES&P=WCMaintenance&Brand=WL&RU=http%3a%2f%2fmail.live.com > ------------------------------------------------------------------------- > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user _________________________________________________________________ Tecnolog?a, moda, motor, viajes,?suscr?bete a nuestros boletines para estar a la ?ltima http://newsletters.msn.com/hm/maintenanceeses.asp?L=ES&C=ES&P=WCMaintenance&Brand=WL&RU=http%3a%2f%2fmail.live.com From dcamposf at ...626... Fri Dec 7 23:57:05 2007 From: dcamposf at ...626... (Daniel Campos) Date: Fri, 7 Dec 2007 23:57:05 +0100 Subject: [Gambas-user] try to make Ubuntu package with a proyect In-Reply-To: References: <676409.38360.qm@...1656...> Message-ID: <7259b5ae0712071457u2a8980f9yd5fb9eeeb400764d@...627...> Try with the updated packages: http://danicafe.extreblog.com/200709118041_Gambas-packages-for-Ubuntu-Feisty-and-Guadalinex-v41.html Regards 2007/12/7, javier romero : > > Finally i can build a ubuntu package with my proyect, but when i try to install this it can not do because a missing reference "gambas2-gb-form-dialog" i try to install this but i can find this package in ubuntu repositories. > > Javier > ---------------------------------------- > > From: cjro99 at ...67... > > To: gambas-user at lists.sourceforge.net > > Date: Fri, 7 Dec 2007 14:04:15 +0000 > > Subject: [Gambas-user] try to make Ubuntu package with a proyect > > > > > > I finished a proyect and when i want build a package with there, ubuntu and debian options are enabled and a message saids i need to install "debhelper", i install there and try again but the options steel enabled and gambas not detect i install debhelper. What more i need install? > > > > Thanks > > Javier > > _________________________________________________________________ > > Tecnolog?a, moda, motor, viajes,?suscr?bete a nuestros boletines para estar a la ?ltima > > http://newsletters.msn.com/hm/maintenanceeses.asp?L=ES&C=ES&P=WCMaintenance&Brand=WL&RU=http%3a%2f%2fmail.live.com > > ------------------------------------------------------------------------- > > SF.Net email is sponsored by: > > Check out the new SourceForge.net Marketplace. > > It's the best place to buy or sell services for > > just about anything Open Source. > > http://sourceforge.net/services/buy/index.php > > _______________________________________________ > > Gambas-user mailing list > > Gambas-user at lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/gambas-user > > _________________________________________________________________ > Tecnolog?a, moda, motor, viajes,?suscr?bete a nuestros boletines para estar a la ?ltima > http://newsletters.msn.com/hm/maintenanceeses.asp?L=ES&C=ES&P=WCMaintenance&Brand=WL&RU=http%3a%2f%2fmail.live.com > ------------------------------------------------------------------------- > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > From rgx at ...17... Sat Dec 8 14:10:55 2007 From: rgx at ...17... (RalfGesellensetter) Date: Sat, 8 Dec 2007 14:10:55 +0100 Subject: [Gambas-user] About the Gambas article In-Reply-To: <200712042144.06234.gambas@...1...> References: <200712042144.06234.gambas@...1...> Message-ID: <200712081410.55546.rgx@...17...> Am Dienstag 04 Dezember 2007 schrieb Benoit Minisini: > So, now, I'm looking for another place where this article could be > submitted: does anyone have some ideas? Salut, now, where is this article anyway? Wondering Ralf. From rgx at ...17... Sat Dec 8 14:19:55 2007 From: rgx at ...17... (RalfGesellensetter) Date: Sat, 8 Dec 2007 14:19:55 +0100 Subject: [Gambas-user] About the Gambas article In-Reply-To: <200712081410.55546.rgx@...17...> References: <200712042144.06234.gambas@...1...> <200712081410.55546.rgx@...17...> Message-ID: <200712081419.55248.rgx@...17...> Am Samstag 08 Dezember 2007 schrieb RalfGesellensetter: > now, where is this article anyway? Sorry, scrolling down the list, I made it to http://gambasdoc.org/help/doc/release?en There is no release date in the article (but in history), and I wonder if this was put on purpose: "attracting more testers^W users" - and what is the effect of such wording on the reader. As I didn't find any quotings in German either (golem.de, heise.de etc.) we should consider posting the article to some local linux zines, mailing lists etc. What do you think? Regards Ralf From gambas at ...1... Sat Dec 8 14:27:11 2007 From: gambas at ...1... (Benoit Minisini) Date: Sat, 8 Dec 2007 14:27:11 +0100 Subject: [Gambas-user] About the Gambas article In-Reply-To: <200712081419.55248.rgx@...17...> References: <200712042144.06234.gambas@...1...> <200712081410.55546.rgx@...17...> <200712081419.55248.rgx@...17...> Message-ID: <200712081427.11282.gambas@...1...> On samedi 8 d?cembre 2007, RalfGesellensetter wrote: > Am Samstag 08 Dezember 2007 schrieb RalfGesellensetter: > > now, where is this article anyway? > > Sorry, scrolling down the list, I made it to > http://gambasdoc.org/help/doc/release?en > > There is no release date in the article (but in history), and I wonder > if this was put on purpose: "attracting more testers^W users" - and > what is the effect of such wording on the reader. > > As I didn't find any quotings in German either (golem.de, heise.de etc.) > we should consider posting the article to some local linux zines, > mailing lists etc. > > What do you think? > > Regards > Ralf > Apparently when I post this article, or a link to this article with a little summary, I am rejected without even being noticed. So for sure you or other will be luckier than me! Anyway, as for OSNews, you must check if posting the article somewhere prevents you from posting the article elsewhere, even if it is a translation. I have successfully posted an announce and a link to the article on a french news site. Regards, -- Benoit Minisini From simonart.dominique at ...11... Sat Dec 8 23:45:40 2007 From: simonart.dominique at ...11... (Dominique SIMONART) Date: Sat, 08 Dec 2007 23:45:40 +0100 Subject: [Gambas-user] IDE go in a infinite loop? Message-ID: <475B1E94.9060503@...11...> Hi everybody, May be all is OK, but may be not! Here is the case. Gambas 1.9.91 OpenSuse 10.3 Kde By inattention, I omit to type the quote in a comment line like this: ------------------------------- Sc I wanted to write Score, but at that moment the IDE entered in a infinite execution loop. For about a minute I do nothing, but finally, I ended Gambas. I think I've to report this, and I'm curious to know what was happening! regards Dominique Simonart From ron at ...1740... Sun Dec 9 13:33:56 2007 From: ron at ...1740... (Ron) Date: Sun, 09 Dec 2007 13:33:56 +0100 Subject: [Gambas-user] gb.vb help function Message-ID: <475BE0B4.6000101@...1740...> Hi, Let say I want to convert an VB application to Gambas. Wat does enabling gb.vb module/option in a project give me? Is there an import or convert option or script available to do most of the work? Thanks in advance. Regards, Ron. From gambas at ...1... Mon Dec 10 07:31:10 2007 From: gambas at ...1... (Benoit Minisini) Date: Mon, 10 Dec 2007 07:31:10 +0100 Subject: [Gambas-user] IDE go in a infinite loop? In-Reply-To: <475B1E94.9060503@...11...> References: <475B1E94.9060503@...11...> Message-ID: <200712100731.10289.gambas@...1...> On samedi 8 d?cembre 2007, Dominique SIMONART wrote: > Hi everybody, > > May be all is OK, but may be not! Here is the case. > Gambas 1.9.91 OpenSuse 10.3 Kde > By inattention, I omit to type the quote in a comment line like this: > ------------------------------- Sc > I wanted to write Score, but at that moment the IDE entered in a > infinite execution loop. For about a minute I do nothing, but finally, I > ended Gambas. > I think I've to report this, and I'm curious to know what was happening! > > regards > Dominique Simonart > This is a bug in the compiler. It will be fixed in the next revision. Regards, -- Benoit Minisini From cjro99 at ...67... Mon Dec 10 14:34:17 2007 From: cjro99 at ...67... (javier romero) Date: Mon, 10 Dec 2007 13:34:17 +0000 Subject: [Gambas-user] try to make Ubuntu package with a proyect In-Reply-To: <7259b5ae0712071457u2a8980f9yd5fb9eeeb400764d@...627...> References: <676409.38360.qm@...1656...> <7259b5ae0712071457u2a8980f9yd5fb9eeeb400764d@...627...> Message-ID: Ok, i install ubuntu with the guadalinex package and i try to make a ubuntu package with my proyect but when i try this an error is send: "/usr/bin/dpkg-buildpackage: 224: debian/rules: permission denied" and the .deb is not created. When i compiled gambas for the tar and install them, the .deb is created but it sends the error dependencie reference "gambas2-gb-form-dialog". What is the minimal gambas package i need to install in other pc where i want to run a gambas proyect? only gambas runtime? Thanks Javier ---------------------------------------- > Date: Fri, 7 Dec 2007 23:57:05 +0100 > From: dcamposf at ...626... > To: gambas-user at lists.sourceforge.net > Subject: Re: [Gambas-user] try to make Ubuntu package with a proyect > > Try with the updated packages: > > http://danicafe.extreblog.com/200709118041_Gambas-packages-for-Ubuntu-Feisty-and-Guadalinex-v41.html > > Regards > > 2007/12/7, javier romero : >> >> Finally i can build a ubuntu package with my proyect, but when i try to install this it can not do because a missing reference "gambas2-gb-form-dialog" i try to install this but i can find this package in ubuntu repositories. >> >> Javier >> ---------------------------------------- >>> From: cjro99 at ...67... >>> To: gambas-user at lists.sourceforge.net >>> Date: Fri, 7 Dec 2007 14:04:15 +0000 >>> Subject: [Gambas-user] try to make Ubuntu package with a proyect >>> >>> >>> I finished a proyect and when i want build a package with there, ubuntu and debian options are enabled and a message saids i need to install "debhelper", i install there and try again but the options steel enabled and gambas not detect i install debhelper. What more i need install? >>> >>> Thanks >>> Javier >>> _________________________________________________________________ >>> Tecnolog?a, moda, motor, viajes,?suscr?bete a nuestros boletines para estar a la ?ltima >>> http://newsletters.msn.com/hm/maintenanceeses.asp?L=ES&C=ES&P=WCMaintenance&Brand=WL&RU=http%3a%2f%2fmail.live.com >>> ------------------------------------------------------------------------- >>> SF.Net email is sponsored by: >>> Check out the new SourceForge.net Marketplace. >>> It's the best place to buy or sell services for >>> just about anything Open Source. >>> http://sourceforge.net/services/buy/index.php >>> _______________________________________________ >>> Gambas-user mailing list >>> Gambas-user at lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/gambas-user >> >> _________________________________________________________________ >> Tecnolog?a, moda, motor, viajes,?suscr?bete a nuestros boletines para estar a la ?ltima >> http://newsletters.msn.com/hm/maintenanceeses.asp?L=ES&C=ES&P=WCMaintenance&Brand=WL&RU=http%3a%2f%2fmail.live.com >> ------------------------------------------------------------------------- >> SF.Net email is sponsored by: >> Check out the new SourceForge.net Marketplace. >> It's the best place to buy or sell services for >> just about anything Open Source. >> http://sourceforge.net/services/buy/index.php >> _______________________________________________ >> Gambas-user mailing list >> Gambas-user at lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/gambas-user >> > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user _________________________________________________________________ Tecnolog?a, moda, motor, viajes,?suscr?bete a nuestros boletines para estar a la ?ltima http://newsletters.msn.com/hm/maintenanceeses.asp?L=ES&C=ES&P=WCMaintenance&Brand=WL&RU=http%3a%2f%2fmail.live.com From gambas.fr at ...626... Mon Dec 10 16:07:57 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Mon, 10 Dec 2007 16:07:57 +0100 Subject: [Gambas-user] RichDBGrid Alpha Message-ID: <200712101607.57167.gambas.fr@...626...> This is a little encapsulation class to make rich grid viewer for Database . There is a dynamic Conditional set of class used by the gridview and a system to store and restore cells or anything that have a simple format in a string. It store BackColor, ForeColor, Alignment, Font, Padding. For exemple this : Epuises = "BackColor: &FF0000&; ForeColor: &HFFFFFF&; Font: Bold,+2" hCondition = NEW Conditions("salary", Conditions.EstSuperieur, 4000, Epuises) hCondition.Add("salary", Conditions.EstInferieur, 6500) $hDBGrid.CondFormats.Add(hCondition) Say to change format on line where the salary > 4000 and < 6500 it set the bgcolor to red and the Forecolor to white set the font bold and increase it to grade +2 TODO The Column Format.. i will use an array of format string .. Sp?cific Column Format.. or better Specific Column conditionality Some word are in french... sorry, the CFormat and Conditions classes can be used in many other cases.. An advise ? Fabien -------------- next part -------------- A non-text attachment was scrubbed... Name: gg-0.0.8.tar.gz Type: application/x-tgz Size: 31671 bytes Desc: not available URL: From jscops at ...11... Mon Dec 10 16:42:15 2007 From: jscops at ...11... (Jacky) Date: Mon, 10 Dec 2007 16:42:15 +0100 Subject: [Gambas-user] RichDBGrid Alpha In-Reply-To: <200712101607.57167.gambas.fr@...626...> References: <200712101607.57167.gambas.fr@...626...> Message-ID: <200712101642.15305.jscops@...11...> Le Monday 10 December 2007 16:07:57 Fabien Bodard, vous avez ?crit?: > This is a little encapsulation class to make rich grid viewer for Database > . > > There is a dynamic Conditional set of class used by the gridview and a > system to store and restore cells or anything that have a simple format in > a string. It store BackColor, ForeColor, Alignment, Font, Padding. > > For exemple this : > > Epuises = "BackColor: &FF0000&; ForeColor: &HFFFFFF&; Font: Bold,+2" > hCondition = NEW Conditions("salary", Conditions.EstSuperieur, 4000, > Epuises) hCondition.Add("salary", Conditions.EstInferieur, 6500) > $hDBGrid.CondFormats.Add(hCondition) > > Say to change format on line where the salary > 4000 and < 6500 > > it set the bgcolor to red and the Forecolor to white set the font bold and > increase it to grade +2 > > TODO > > The Column Format.. i will use an array of format string .. > > Sp?cific Column Format.. or better Specific Column conditionality > > Some word are in french... sorry, the CFormat and Conditions classes can be > used in many other cases.. > > An advise ? > > > > Fabien On t'a d?j? dis que t'?tais bon ? Je peux pas tester car je n'ai pas de base test et l'exemple database me pete une erreur 6. Peux-tu corriger un bug g?nant en facture il faudrait que tu supprimes ", block_ligbl = &15 " dans les deux procedures suivantes. '* Pour les articles. PUBLIC SUB Enrg_LigArt() ' ' IF rResult.Available THEN Utils.db.Exec("UPDATE " & tab & " SET num_ligbl = &1 , numlig_ligbl = &2 , code_ligbl = &3, libel_ligbl = &4, fam_ligbl = &5, pu_ligbl = &6, qte_ligbl = &7, brut_ligbl = &8, rem_ligbl = &9, netht_ligbl = &10, tx_ligbl = &11, nettc_ligbl = &12, typel_ligbl = &13, dec_ligbl = &14 WHERE num_ligbl = &1 and numlig_ligbl = &2", num.Text, Nlgart.Text, Cart.Text, Artdsg.Text, ArtFam.Text, Artpu.Text, Artqte.Text, Artbrut.Text, Artrm.Text, Artnet.Text, Arttx.Text, Arttc.Text, typeL, Dec.Text) '* Pour la MO. PUBLIC SUB Enrg_LigMo() ' ' IF rResult.Available THEN Utils.db.Exec("UPDATE " & tab & " SET num_ligbl = &1 , numlig_ligbl = &2 , code_ligbl = &3, libel_ligbl = &4, fam_ligbl = &5, pu_ligbl = &6, qte_ligbl = &7, brut_ligbl = &8, rem_ligbl = &9, netht_ligbl = &10, tx_ligbl = &11, nettc_ligbl = &12, typel_ligbl = &13, tm_ligbl = &14 WHERE num_ligbl = &1 and numlig_ligbl = &2", num.Text, Nlg.Text, Cmo.Text, libelle.Text, CdFam.Text, Txhr.Text, Tmont.Text, Brutht.Text, Rem.Text, Netht.Text, Tmo.Text, Nettc.Text, typeL, Tm.Text) A + From jscops at ...11... Mon Dec 10 16:44:43 2007 From: jscops at ...11... (Jacky) Date: Mon, 10 Dec 2007 16:44:43 +0100 Subject: [Gambas-user] RichDBGrid Alpha In-Reply-To: <200712101642.15305.jscops@...11...> References: <200712101607.57167.gambas.fr@...626...> <200712101642.15305.jscops@...11...> Message-ID: <200712101644.43675.jscops@...11...> Hi, sorry, it's not the good adress. Jacky From gambas.fr at ...626... Mon Dec 10 17:47:15 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Mon, 10 Dec 2007 17:47:15 +0100 Subject: [Gambas-user] RichDBGrid Alpha In-Reply-To: <200712101642.15305.jscops@...11...> References: <200712101607.57167.gambas.fr@...626...> <200712101642.15305.jscops@...11...> Message-ID: <200712101747.16037.gambas.fr@...626...> > https://lists.sourceforge.net/lists/listinfo/gambas-user Jacky pas dans la Gambas users en anglais... From jredrejo at ...626... Mon Dec 10 18:28:06 2007 From: jredrejo at ...626... (=?ISO-8859-1?Q?Jos=E9_Luis_Redrejo?=) Date: Mon, 10 Dec 2007 18:28:06 +0100 Subject: [Gambas-user] try to make Ubuntu package with a proyect In-Reply-To: References: <676409.38360.qm@...1656...> <7259b5ae0712071457u2a8980f9yd5fb9eeeb400764d@...627...> Message-ID: <8eb28a500712100928h33f91d14mffa90db2efc2cfa0@...627...> The lack of the gambas2-gb-form-dialog package points to an old version of gambas in your system, as http://packages.debian.org/sid/gambas2-gb-form-dialog really exists. Compiling from the sources, you're merging the updated gambas version with old packages, what can not work. I'm afraid Ubuntu and all its satellite versions are not very updated with Gambas. They haven't copied the Debian packages since some months ago. You should use the packages Daniel takes from Debian and recompile to Ubuntu with the last version as he recommended to you in a previous email, and not the guadalinex/ubuntu old ones. Cheers. 2007/12/10, javier romero : > > > Ok, i install ubuntu with the guadalinex package and i try to make a > ubuntu package with my proyect but when i try this an error is send: > "/usr/bin/dpkg-buildpackage: 224: debian/rules: permission denied" and the > .deb is not created. When i compiled gambas for the tar and install them, > the .deb is created but it sends the error dependencie reference > "gambas2-gb-form-dialog". > > > What is the minimal gambas package i need to install in other pc where i > want to run a gambas proyect? only gambas runtime? > > Thanks > Javier > ---------------------------------------- > > Date: Fri, 7 Dec 2007 23:57:05 +0100 > > From: dcamposf at ...626... > > To: gambas-user at lists.sourceforge.net > > Subject: Re: [Gambas-user] try to make Ubuntu package with a proyect > > > > Try with the updated packages: > > > > > http://danicafe.extreblog.com/200709118041_Gambas-packages-for-Ubuntu-Feisty-and-Guadalinex-v41.html > > > > Regards > > > > 2007/12/7, javier romero : > >> > >> Finally i can build a ubuntu package with my proyect, but when i try to > install this it can not do because a missing reference > "gambas2-gb-form-dialog" i try to install this but i can find this package > in ubuntu repositories. > >> > >> Javier > >> ---------------------------------------- > >>> From: cjro99 at ...67... > >>> To: gambas-user at lists.sourceforge.net > >>> Date: Fri, 7 Dec 2007 14:04:15 +0000 > >>> Subject: [Gambas-user] try to make Ubuntu package with a proyect > >>> > >>> > >>> I finished a proyect and when i want build a package with there, > ubuntu and debian options are enabled and a message saids i need to install > "debhelper", i install there and try again but the options steel enabled and > gambas not detect i install debhelper. What more i need install? > >>> > >>> Thanks > >>> Javier > >>> _________________________________________________________________ > >>> Tecnolog?a, moda, motor, viajes,?suscr?bete a nuestros boletines para > estar a la ?ltima > >>> > http://newsletters.msn.com/hm/maintenanceeses.asp?L=ES&C=ES&P=WCMaintenance&Brand=WL&RU=http%3a%2f%2fmail.live.com > >>> > ------------------------------------------------------------------------- > >>> SF.Net email is sponsored by: > >>> Check out the new SourceForge.net Marketplace. > >>> It's the best place to buy or sell services for > >>> just about anything Open Source. > >>> http://sourceforge.net/services/buy/index.php > >>> _______________________________________________ > >>> Gambas-user mailing list > >>> Gambas-user at lists.sourceforge.net > >>> https://lists.sourceforge.net/lists/listinfo/gambas-user > >> > >> _________________________________________________________________ > >> Tecnolog?a, moda, motor, viajes,?suscr?bete a nuestros boletines para > estar a la ?ltima > >> > http://newsletters.msn.com/hm/maintenanceeses.asp?L=ES&C=ES&P=WCMaintenance&Brand=WL&RU=http%3a%2f%2fmail.live.com > >> > ------------------------------------------------------------------------- > >> SF.Net email is sponsored by: > >> Check out the new SourceForge.net Marketplace. > >> It's the best place to buy or sell services for > >> just about anything Open Source. > >> http://sourceforge.net/services/buy/index.php > >> _______________________________________________ > >> Gambas-user mailing list > >> Gambas-user at lists.sourceforge.net > >> https://lists.sourceforge.net/lists/listinfo/gambas-user > >> > > > > > ------------------------------------------------------------------------- > > SF.Net email is sponsored by: > > Check out the new SourceForge.net Marketplace. > > It's the best place to buy or sell services for > > just about anything Open Source. > > http://sourceforge.net/services/buy/index.php > > _______________________________________________ > > Gambas-user mailing list > > Gambas-user at lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/gambas-user > > _________________________________________________________________ > Tecnolog?a, moda, motor, viajes,?suscr?bete a nuestros boletines para > estar a la ?ltima > > http://newsletters.msn.com/hm/maintenanceeses.asp?L=ES&C=ES&P=WCMaintenance&Brand=WL&RU=http%3a%2f%2fmail.live.com > ------------------------------------------------------------------------- > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > From cjro99 at ...67... Mon Dec 10 22:23:56 2007 From: cjro99 at ...67... (javier romero) Date: Mon, 10 Dec 2007 21:23:56 +0000 Subject: [Gambas-user] try to make Ubuntu package with a proyect In-Reply-To: <8eb28a500712100928h33f91d14mffa90db2efc2cfa0@...627...> References: <676409.38360.qm@...1656...> <7259b5ae0712071457u2a8980f9yd5fb9eeeb400764d@...627...> <8eb28a500712100928h33f91d14mffa90db2efc2cfa0@...627...> Message-ID: Yes, i erase the compile instalation and install the package from ubuntu gutsy gibbon with the Daniels Link and now when i make the ubuntu package of my proyect it doesnt finish and sends me a message error: "/usr/bin/dpkg-buildpackage: 224: debian/rules: permission denied". What permissions i need to change to make the package?. And what i need to install (minimal) in other PC to run (only run) my proyect? Thanks Javier ---------------------------------------- > Date: Mon, 10 Dec 2007 18:28:06 +0100 > From: jredrejo at ...626... > To: gambas-user at lists.sourceforge.net > Subject: Re: [Gambas-user] try to make Ubuntu package with a proyect > > The lack of the gambas2-gb-form-dialog package points to an old version of > gambas in your system, as > http://packages.debian.org/sid/gambas2-gb-form-dialog really exists. > > Compiling from the sources, you're merging the updated gambas version with > old packages, what can not work. > > I'm afraid Ubuntu and all its satellite versions are not very updated with > Gambas. They haven't copied the Debian packages since some months ago. > > You should use the packages Daniel takes from Debian and recompile to Ubuntu > with the last version as he recommended to you in a previous email, and not > the guadalinex/ubuntu old ones. > > Cheers. > > 2007/12/10, javier romero : >> >> >> Ok, i install ubuntu with the guadalinex package and i try to make a >> ubuntu package with my proyect but when i try this an error is send: >> "/usr/bin/dpkg-buildpackage: 224: debian/rules: permission denied" and the >> .deb is not created. When i compiled gambas for the tar and install them, >> the .deb is created but it sends the error dependencie reference >> "gambas2-gb-form-dialog". >> >> >> What is the minimal gambas package i need to install in other pc where i >> want to run a gambas proyect? only gambas runtime? >> >> Thanks >> Javier >> ---------------------------------------- >>> Date: Fri, 7 Dec 2007 23:57:05 +0100 >>> From: dcamposf at ...626... >>> To: gambas-user at lists.sourceforge.net >>> Subject: Re: [Gambas-user] try to make Ubuntu package with a proyect >>> >>> Try with the updated packages: >>> >>> >> http://danicafe.extreblog.com/200709118041_Gambas-packages-for-Ubuntu-Feisty-and-Guadalinex-v41.html >>> >>> Regards >>> >>> 2007/12/7, javier romero : >>>> >>>> Finally i can build a ubuntu package with my proyect, but when i try to >> install this it can not do because a missing reference >> "gambas2-gb-form-dialog" i try to install this but i can find this package >> in ubuntu repositories. >>>> >>>> Javier >>>> ---------------------------------------- >>>>> From: cjro99 at ...67... >>>>> To: gambas-user at lists.sourceforge.net >>>>> Date: Fri, 7 Dec 2007 14:04:15 +0000 >>>>> Subject: [Gambas-user] try to make Ubuntu package with a proyect >>>>> >>>>> >>>>> I finished a proyect and when i want build a package with there, >> ubuntu and debian options are enabled and a message saids i need to install >> "debhelper", i install there and try again but the options steel enabled and >> gambas not detect i install debhelper. What more i need install? >>>>> >>>>> Thanks >>>>> Javier >>>>> _________________________________________________________________ >>>>> Tecnolog?a, moda, motor, viajes,?suscr?bete a nuestros boletines para >> estar a la ?ltima >>>>> >> http://newsletters.msn.com/hm/maintenanceeses.asp?L=ES&C=ES&P=WCMaintenance&Brand=WL&RU=http%3a%2f%2fmail.live.com >>>>> >> ------------------------------------------------------------------------- >>>>> SF.Net email is sponsored by: >>>>> Check out the new SourceForge.net Marketplace. >>>>> It's the best place to buy or sell services for >>>>> just about anything Open Source. >>>>> http://sourceforge.net/services/buy/index.php >>>>> _______________________________________________ >>>>> Gambas-user mailing list >>>>> Gambas-user at lists.sourceforge.net >>>>> https://lists.sourceforge.net/lists/listinfo/gambas-user >>>> >>>> _________________________________________________________________ >>>> Tecnolog?a, moda, motor, viajes,?suscr?bete a nuestros boletines para >> estar a la ?ltima >>>> >> http://newsletters.msn.com/hm/maintenanceeses.asp?L=ES&C=ES&P=WCMaintenance&Brand=WL&RU=http%3a%2f%2fmail.live.com >>>> >> ------------------------------------------------------------------------- >>>> SF.Net email is sponsored by: >>>> Check out the new SourceForge.net Marketplace. >>>> It's the best place to buy or sell services for >>>> just about anything Open Source. >>>> http://sourceforge.net/services/buy/index.php >>>> _______________________________________________ >>>> Gambas-user mailing list >>>> Gambas-user at lists.sourceforge.net >>>> https://lists.sourceforge.net/lists/listinfo/gambas-user >>>> >>> >>> >> ------------------------------------------------------------------------- >>> SF.Net email is sponsored by: >>> Check out the new SourceForge.net Marketplace. >>> It's the best place to buy or sell services for >>> just about anything Open Source. >>> http://sourceforge.net/services/buy/index.php >>> _______________________________________________ >>> Gambas-user mailing list >>> Gambas-user at lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/gambas-user >> >> _________________________________________________________________ >> Tecnolog?a, moda, motor, viajes,?suscr?bete a nuestros boletines para >> estar a la ?ltima >> >> http://newsletters.msn.com/hm/maintenanceeses.asp?L=ES&C=ES&P=WCMaintenance&Brand=WL&RU=http%3a%2f%2fmail.live.com >> ------------------------------------------------------------------------- >> SF.Net email is sponsored by: >> Check out the new SourceForge.net Marketplace. >> It's the best place to buy or sell services for >> just about anything Open Source. >> http://sourceforge.net/services/buy/index.php >> _______________________________________________ >> Gambas-user mailing list >> Gambas-user at lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/gambas-user >> > ------------------------------------------------------------------------- > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user _________________________________________________________________ Tecnolog?a, moda, motor, viajes,?suscr?bete a nuestros boletines para estar a la ?ltima http://newsletters.msn.com/hm/maintenanceeses.asp?L=ES&C=ES&P=WCMaintenance&Brand=WL&RU=http%3a%2f%2fmail.live.com From jredrejo at ...626... Tue Dec 11 08:37:35 2007 From: jredrejo at ...626... (=?ISO-8859-1?Q?Jos=E9_Luis_Redrejo?=) Date: Tue, 11 Dec 2007 08:37:35 +0100 Subject: [Gambas-user] try to make Ubuntu package with a proyect In-Reply-To: References: <676409.38360.qm@...1656...> <7259b5ae0712071457u2a8980f9yd5fb9eeeb400764d@...627...> <8eb28a500712100928h33f91d14mffa90db2efc2cfa0@...627...> Message-ID: <8eb28a500712102337s60ac1f2aqe4b2d1edd4773967@...627...> 2007/12/10, javier romero : > > > Yes, i erase the compile instalation and install the package from ubuntu > gutsy gibbon with the Daniels Link and now when i make the ubuntu package of > my proyect it doesnt finish and sends me a message error: > "/usr/bin/dpkg-buildpackage: 224: debian/rules: permission denied". What > permissions i need to change to make the package?. It seems that your debian/rules does not have execution permissions. I don't have any idea why that's happening to you and don't have any ubuntu to test it. In Debian it just works. Some other Ubuntu users have also reported that it works so it might be some problem related to the directory where you're building the package, maybe it's an external usb disk without execution permissions or the Ubuntu version you're using, etc... And what i need to install (minimal) in other PC to run (only run) my > proyect? The dependencies of the generated package will determine it, you only have to install the package (when you fix those errors) Regards. Thanks > Javier > ---------------------------------------- > > Date: Mon, 10 Dec 2007 18:28:06 +0100 > > From: jredrejo at ...626... > > To: gambas-user at lists.sourceforge.net > > Subject: Re: [Gambas-user] try to make Ubuntu package with a proyect > > > > The lack of the gambas2-gb-form-dialog package points to an old version > of > > gambas in your system, as > > http://packages.debian.org/sid/gambas2-gb-form-dialog really exists. > > > > Compiling from the sources, you're merging the updated gambas version > with > > old packages, what can not work. > > > > I'm afraid Ubuntu and all its satellite versions are not very updated > with > > Gambas. They haven't copied the Debian packages since some months ago. > > > > You should use the packages Daniel takes from Debian and recompile to > Ubuntu > > with the last version as he recommended to you in a previous email, and > not > > the guadalinex/ubuntu old ones. > > > > Cheers. > > > > 2007/12/10, javier romero : > >> > >> > >> Ok, i install ubuntu with the guadalinex package and i try to make a > >> ubuntu package with my proyect but when i try this an error is send: > >> "/usr/bin/dpkg-buildpackage: 224: debian/rules: permission denied" and > the > >> .deb is not created. When i compiled gambas for the tar and install > them, > >> the .deb is created but it sends the error dependencie reference > >> "gambas2-gb-form-dialog". > >> > >> > >> What is the minimal gambas package i need to install in other pc where > i > >> want to run a gambas proyect? only gambas runtime? > >> > >> Thanks > >> Javier > >> ---------------------------------------- > >>> Date: Fri, 7 Dec 2007 23:57:05 +0100 > >>> From: dcamposf at ...626... > >>> To: gambas-user at lists.sourceforge.net > >>> Subject: Re: [Gambas-user] try to make Ubuntu package with a proyect > >>> > >>> Try with the updated packages: > >>> > >>> > >> > http://danicafe.extreblog.com/200709118041_Gambas-packages-for-Ubuntu-Feisty-and-Guadalinex-v41.html > >>> > >>> Regards > >>> > >>> 2007/12/7, javier romero : > >>>> > >>>> Finally i can build a ubuntu package with my proyect, but when i try > to > >> install this it can not do because a missing reference > >> "gambas2-gb-form-dialog" i try to install this but i can find this > package > >> in ubuntu repositories. > >>>> > >>>> Javier > >>>> ---------------------------------------- > >>>>> From: cjro99 at ...67... > >>>>> To: gambas-user at lists.sourceforge.net > >>>>> Date: Fri, 7 Dec 2007 14:04:15 +0000 > >>>>> Subject: [Gambas-user] try to make Ubuntu package with a proyect > >>>>> > >>>>> > >>>>> I finished a proyect and when i want build a package with there, > >> ubuntu and debian options are enabled and a message saids i need to > install > >> "debhelper", i install there and try again but the options steel > enabled and > >> gambas not detect i install debhelper. What more i need install? > >>>>> > >>>>> Thanks > >>>>> Javier > >>>>> _________________________________________________________________ > >>>>> Tecnolog?a, moda, motor, viajes,?suscr?bete a nuestros boletines > para > >> estar a la ?ltima > >>>>> > >> > http://newsletters.msn.com/hm/maintenanceeses.asp?L=ES&C=ES&P=WCMaintenance&Brand=WL&RU=http%3a%2f%2fmail.live.com > >>>>> > >> > ------------------------------------------------------------------------- > >>>>> SF.Net email is sponsored by: > >>>>> Check out the new SourceForge.net Marketplace. > >>>>> It's the best place to buy or sell services for > >>>>> just about anything Open Source. > >>>>> http://sourceforge.net/services/buy/index.php > >>>>> _______________________________________________ > >>>>> Gambas-user mailing list > >>>>> Gambas-user at lists.sourceforge.net > >>>>> https://lists.sourceforge.net/lists/listinfo/gambas-user > >>>> > >>>> _________________________________________________________________ > >>>> Tecnolog?a, moda, motor, viajes,?suscr?bete a nuestros boletines para > >> estar a la ?ltima > >>>> > >> > http://newsletters.msn.com/hm/maintenanceeses.asp?L=ES&C=ES&P=WCMaintenance&Brand=WL&RU=http%3a%2f%2fmail.live.com > >>>> > >> > ------------------------------------------------------------------------- > >>>> SF.Net email is sponsored by: > >>>> Check out the new SourceForge.net Marketplace. > >>>> It's the best place to buy or sell services for > >>>> just about anything Open Source. > >>>> http://sourceforge.net/services/buy/index.php > >>>> _______________________________________________ > >>>> Gambas-user mailing list > >>>> Gambas-user at lists.sourceforge.net > >>>> https://lists.sourceforge.net/lists/listinfo/gambas-user > >>>> > >>> > >>> > >> > ------------------------------------------------------------------------- > >>> SF.Net email is sponsored by: > >>> Check out the new SourceForge.net Marketplace. > >>> It's the best place to buy or sell services for > >>> just about anything Open Source. > >>> http://sourceforge.net/services/buy/index.php > >>> _______________________________________________ > >>> Gambas-user mailing list > >>> Gambas-user at lists.sourceforge.net > >>> https://lists.sourceforge.net/lists/listinfo/gambas-user > >> > >> _________________________________________________________________ > >> Tecnolog?a, moda, motor, viajes,?suscr?bete a nuestros boletines para > >> estar a la ?ltima > >> > >> > http://newsletters.msn.com/hm/maintenanceeses.asp?L=ES&C=ES&P=WCMaintenance&Brand=WL&RU=http%3a%2f%2fmail.live.com > >> > ------------------------------------------------------------------------- > >> SF.Net email is sponsored by: > >> Check out the new SourceForge.net Marketplace. > >> It's the best place to buy or sell services for > >> just about anything Open Source. > >> http://sourceforge.net/services/buy/index.php > >> _______________________________________________ > >> Gambas-user mailing list > >> Gambas-user at lists.sourceforge.net > >> https://lists.sourceforge.net/lists/listinfo/gambas-user > >> > > > ------------------------------------------------------------------------- > > SF.Net email is sponsored by: > > Check out the new SourceForge.net Marketplace. > > It's the best place to buy or sell services for > > just about anything Open Source. > > http://sourceforge.net/services/buy/index.php > > _______________________________________________ > > Gambas-user mailing list > > Gambas-user at lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/gambas-user > > _________________________________________________________________ > Tecnolog?a, moda, motor, viajes,?suscr?bete a nuestros boletines para > estar a la ?ltima > > http://newsletters.msn.com/hm/maintenanceeses.asp?L=ES&C=ES&P=WCMaintenance&Brand=WL&RU=http%3a%2f%2fmail.live.com > ------------------------------------------------------------------------- > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > From gambas at ...1... Tue Dec 11 11:41:53 2007 From: gambas at ...1... (Benoit Minisini) Date: Tue, 11 Dec 2007 11:41:53 +0100 Subject: [Gambas-user] gb.vb help function In-Reply-To: <475BE0B4.6000101@...1740...> References: <475BE0B4.6000101@...1740...> Message-ID: <200712111141.54102.gambas@...1...> On dimanche 9 d?cembre 2007, Ron wrote: > Hi, > > Let say I want to convert an VB application to Gambas. > > Wat does enabling gb.vb module/option in a project give me? Just a few functions that have the same behaviour than their VB counterpart. If you need other VB functions, please tell. They should go in that component. > > Is there an import or convert option or script available to do most of > the work? Not really. You will find some things on the mailing-list to translate forms and some code, but what I saw was not finished enough. > Thanks in advance. > Regards, > Ron. > Regards, -- Benoit Minisini From gambas at ...1... Tue Dec 11 12:26:58 2007 From: gambas at ...1... (Benoit Minisini) Date: Tue, 11 Dec 2007 12:26:58 +0100 Subject: [Gambas-user] RC2 soon... Message-ID: <200712111226.59067.gambas@...1...> Hi, I will release Gambas RC2 soon. I am yet aware of the following problems: * Problem between ODBC / Firebird and NUMERIC fields. Andrea Bortolan should work on it. * Rohnny Stormo was unable to add fields or modify them with sqlite3. Do you have the problem yet? * Steven Lobezzo had problems with the GridView, but I'm not sure that this was really Gambas' fault. Any news about that? * HttpClient.Close seems to forget to do a HttpClient.Stop. Can you look at this problem Daniel? * Gareth Bult has problems with Blob fields and his MySQL databased. * Several requests from some lazy guys for a GridView.Rows.Delete method. :-) Please tell if you have other remaining problems or bugs that I forgot. Regards, -- Benoit Minisini From andrea_bortolan at ...325... Tue Dec 11 12:47:56 2007 From: andrea_bortolan at ...325... (Andrea Bortolan) Date: Tue, 11 Dec 2007 11:47:56 +0000 (GMT) Subject: [Gambas-user] RC2 soon... Message-ID: <638542.94396.qm@...1170...> For the ODBC problem I'm waiting Edward feedback on the new ODBC modules version. I'll keep you informed . Ciao ----- Messaggio originale ----- Da: Benoit Minisini A: mailing list for gambas users Inviato: Marted? 11 dicembre 2007, 12:26:58 Oggetto: [Gambas-user] RC2 soon... Hi, I will release Gambas RC2 soon. I am yet aware of the following problems: * Problem between ODBC / Firebird and NUMERIC fields. Andrea Bortolan should work on it. * Rohnny Stormo was unable to add fields or modify them with sqlite3. Do you have the problem yet? * Steven Lobezzo had problems with the GridView, but I'm not sure that this was really Gambas' fault. Any news about that? * HttpClient.Close seems to forget to do a HttpClient.Stop. Can you look at this problem Daniel? * Gareth Bult has problems with Blob fields and his MySQL databased. * Several requests from some lazy guys for a GridView.Rows.Delete method. :-) Please tell if you have other remaining problems or bugs that I forgot. Regards, -- Benoit Minisini ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Gambas-user mailing list Gambas-user at lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user ___________________________________ L'email della prossima generazione? Puoi averla con la nuova Yahoo! Mail: http://it.docs.yahoo.com/nowyoucan.html From gambas.fr at ...626... Tue Dec 11 12:50:00 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Tue, 11 Dec 2007 12:50:00 +0100 Subject: [Gambas-user] RC2 soon... In-Reply-To: <200712111226.59067.gambas@...1...> References: <200712111226.59067.gambas@...1...> Message-ID: <200712111250.01301.gambas.fr@...626...> Le Tuesday 11 December 2007 12:26:58 Benoit Minisini, vous avez ?crit?: > Hi, > > I will release Gambas RC2 soon. > > I am yet aware of the following problems: > > * Problem between ODBC / Firebird and NUMERIC fields. Andrea Bortolan > should work on it. > > * Rohnny Stormo was unable to add fields or modify them with sqlite3. Do > you have the problem yet? > > * Steven Lobezzo had problems with the GridView, but I'm not sure that this > was really Gambas' fault. Any news about that? > > * HttpClient.Close seems to forget to do a HttpClient.Stop. Can you look at > this problem Daniel? > > * Gareth Bult has problems with Blob fields and his MySQL databased. > > * Several requests from some lazy guys for a GridView.Rows.Delete method. > :-) Not lazy, but if the goal of gambas is to be as simple as possible... > > Please tell if you have other remaining problems or bugs that I forgot. > > Regards, From Mike at ...680... Tue Dec 11 13:27:45 2007 From: Mike at ...680... (Mike Keehan) Date: Tue, 11 Dec 2007 12:27:45 +0000 Subject: [Gambas-user] Highlighting editor query Message-ID: <475E8241.6070808@...680...> I am using the highlighting editor in Gambas 1.0.19 to display some plain text for a user to edit. The editor changes all Gambas language words into uppercase, e.g. "and if then" becomes "AND IF THEN". Is there any way to stop it doing this? The editor source code has a number of dictionaries preset with the word list, and a routine to analyse the text, but I can't figure out how to Not Analyse. Mike. -------------- next part -------------- A non-text attachment was scrubbed... Name: Mike.vcf Type: text/x-vcard Size: 172 bytes Desc: not available URL: From gambas at ...1... Tue Dec 11 13:43:26 2007 From: gambas at ...1... (Benoit Minisini) Date: Tue, 11 Dec 2007 13:43:26 +0100 Subject: [Gambas-user] Highlighting editor query In-Reply-To: <475E8241.6070808@...680...> References: <475E8241.6070808@...680...> Message-ID: <200712111343.27263.gambas@...1...> On mardi 11 d?cembre 2007, Mike Keehan wrote: > I am using the highlighting editor in Gambas 1.0.19 to display some > plain text for a user to edit. The editor changes all Gambas language > words into uppercase, e.g. "and if then" becomes "AND IF THEN". > > Is there any way to stop it doing this? > > The editor source code has a number of dictionaries preset with the > word list, and a routine to analyse the text, but I can't figure out > how to Not Analyse. > > Mike. Not in the Gambas 1.x version. But why do you use the source code editor to just edit plain text? -- Benoit Minisini From Mike at ...680... Tue Dec 11 13:54:19 2007 From: Mike at ...680... (Mike Keehan) Date: Tue, 11 Dec 2007 12:54:19 +0000 Subject: [Gambas-user] Highlighting editor query In-Reply-To: <200712111343.27263.gambas@...1...> References: <475E8241.6070808@...680...> <200712111343.27263.gambas@...1...> Message-ID: <475E887B.9000606@...680...> Benoit Minisini wrote: > On mardi 11 d?cembre 2007, Mike Keehan wrote: >> I am using the highlighting editor in Gambas 1.0.19 to display some >> plain text for a user to edit. The editor changes all Gambas language >> words into uppercase, e.g. "and if then" becomes "AND IF THEN". >> >> Is there any way to stop it doing this? >> >> The editor source code has a number of dictionaries preset with the >> word list, and a routine to analyse the text, but I can't figure out >> how to Not Analyse. >> >> Mike. > > Not in the Gambas 1.x version. But why do you use the source code editor to > just edit plain text? > Ahh, well it had some other useful features when I first wrote the program. I use the breakpoint facility to mark a particular line in the text - the colours are used to highlight some things. It was easier to use that control at the time. I guess I should port it all to Gambas 2 now, and use a simpler editor control. That will give me something interesting to do :) Thanks for replying Benoit. Cheers, Mike. From cjro99 at ...67... Tue Dec 11 14:01:07 2007 From: cjro99 at ...67... (javier romero) Date: Tue, 11 Dec 2007 13:01:07 +0000 Subject: [Gambas-user] try to make Ubuntu package with a proyect In-Reply-To: <8eb28a500712102337s60ac1f2aqe4b2d1edd4773967@...627...> References: <676409.38360.qm@...1656...> <7259b5ae0712071457u2a8980f9yd5fb9eeeb400764d@...627...> <8eb28a500712100928h33f91d14mffa90db2efc2cfa0@...627...> <8eb28a500712102337s60ac1f2aqe4b2d1edd4773967@...627...> Message-ID: Hi, No, i try to make the package in a new directory, not in a external usb disk, the debian/rules files is created inside this directory, i dont know what is happened. Im using ubuntu 7.10. Ok, Thanks anyway Javier > Date: Tue, 11 Dec 2007 08:37:35 +0100 > From: jredrejo at ...626... > To: gambas-user at lists.sourceforge.net > Subject: Re: [Gambas-user] try to make Ubuntu package with a proyect > > 2007/12/10, javier romero : > > > > > > Yes, i erase the compile instalation and install the package from ubuntu > > gutsy gibbon with the Daniels Link and now when i make the ubuntu package of > > my proyect it doesnt finish and sends me a message error: > > "/usr/bin/dpkg-buildpackage: 224: debian/rules: permission denied". What > > permissions i need to change to make the package?. > > > > It seems that your debian/rules does not have execution permissions. I > don't have any idea why that's happening to you and don't have any ubuntu to > test it. In Debian it just works. Some other Ubuntu users have also reported > that it works so it might be some problem related to the directory where > you're building the package, maybe it's an external usb disk without > execution permissions or the Ubuntu version you're using, etc... > > > And what i need to install (minimal) in other PC to run (only run) my > > proyect? > > > > > The dependencies of the generated package will determine it, you only have > to install the package (when you fix those errors) > > Regards. > > > Thanks > > Javier > > ---------------------------------------- > > > Date: Mon, 10 Dec 2007 18:28:06 +0100 > > > From: jredrejo at ...626... > > > To: gambas-user at lists.sourceforge.net > > > Subject: Re: [Gambas-user] try to make Ubuntu package with a proyect > > > > > > The lack of the gambas2-gb-form-dialog package points to an old version > > of > > > gambas in your system, as > > > http://packages.debian.org/sid/gambas2-gb-form-dialog really exists. > > > > > > Compiling from the sources, you're merging the updated gambas version > > with > > > old packages, what can not work. > > > > > > I'm afraid Ubuntu and all its satellite versions are not very updated > > with > > > Gambas. They haven't copied the Debian packages since some months ago. > > > > > > You should use the packages Daniel takes from Debian and recompile to > > Ubuntu > > > with the last version as he recommended to you in a previous email, and > > not > > > the guadalinex/ubuntu old ones. > > > > > > Cheers. > > > > > > 2007/12/10, javier romero : > > >> > > >> > > >> Ok, i install ubuntu with the guadalinex package and i try to make a > > >> ubuntu package with my proyect but when i try this an error is send: > > >> "/usr/bin/dpkg-buildpackage: 224: debian/rules: permission denied" and > > the > > >> .deb is not created. When i compiled gambas for the tar and install > > them, > > >> the .deb is created but it sends the error dependencie reference > > >> "gambas2-gb-form-dialog". > > >> > > >> > > >> What is the minimal gambas package i need to install in other pc where > > i > > >> want to run a gambas proyect? only gambas runtime? > > >> > > >> Thanks > > >> Javier > > >> ---------------------------------------- > > >>> Date: Fri, 7 Dec 2007 23:57:05 +0100 > > >>> From: dcamposf at ...626... > > >>> To: gambas-user at lists.sourceforge.net > > >>> Subject: Re: [Gambas-user] try to make Ubuntu package with a proyect > > >>> > > >>> Try with the updated packages: > > >>> > > >>> > > >> > > http://danicafe.extreblog.com/200709118041_Gambas-packages-for-Ubuntu-Feisty-and-Guadalinex-v41.html > > >>> > > >>> Regards > > >>> > > >>> 2007/12/7, javier romero : > > >>>> > > >>>> Finally i can build a ubuntu package with my proyect, but when i try > > to > > >> install this it can not do because a missing reference > > >> "gambas2-gb-form-dialog" i try to install this but i can find this > > package > > >> in ubuntu repositories. > > >>>> > > >>>> Javier > > >>>> ---------------------------------------- > > >>>>> From: cjro99 at ...67... > > >>>>> To: gambas-user at lists.sourceforge.net > > >>>>> Date: Fri, 7 Dec 2007 14:04:15 +0000 > > >>>>> Subject: [Gambas-user] try to make Ubuntu package with a proyect > > >>>>> > > >>>>> > > >>>>> I finished a proyect and when i want build a package with there, > > >> ubuntu and debian options are enabled and a message saids i need to > > install > > >> "debhelper", i install there and try again but the options steel > > enabled and > > >> gambas not detect i install debhelper. What more i need install? > > >>>>> > > >>>>> Thanks > > >>>>> Javier > > >>>>> _________________________________________________________________ > > >>>>> Tecnolog?a, moda, motor, viajes,?suscr?bete a nuestros boletines > > para > > >> estar a la ?ltima > > >>>>> > > >> > > http://newsletters.msn.com/hm/maintenanceeses.asp?L=ES&C=ES&P=WCMaintenance&Brand=WL&RU=http%3a%2f%2fmail.live.com > > >>>>> > > >> > > ------------------------------------------------------------------------- > > >>>>> SF.Net email is sponsored by: > > >>>>> Check out the new SourceForge.net Marketplace. > > >>>>> It's the best place to buy or sell services for > > >>>>> just about anything Open Source. > > >>>>> http://sourceforge.net/services/buy/index.php > > >>>>> _______________________________________________ > > >>>>> Gambas-user mailing list > > >>>>> Gambas-user at lists.sourceforge.net > > >>>>> https://lists.sourceforge.net/lists/listinfo/gambas-user > > >>>> > > >>>> _________________________________________________________________ > > >>>> Tecnolog?a, moda, motor, viajes,?suscr?bete a nuestros boletines para > > >> estar a la ?ltima > > >>>> > > >> > > http://newsletters.msn.com/hm/maintenanceeses.asp?L=ES&C=ES&P=WCMaintenance&Brand=WL&RU=http%3a%2f%2fmail.live.com > > >>>> > > >> > > ------------------------------------------------------------------------- > > >>>> SF.Net email is sponsored by: > > >>>> Check out the new SourceForge.net Marketplace. > > >>>> It's the best place to buy or sell services for > > >>>> just about anything Open Source. > > >>>> http://sourceforge.net/services/buy/index.php > > >>>> _______________________________________________ > > >>>> Gambas-user mailing list > > >>>> Gambas-user at lists.sourceforge.net > > >>>> https://lists.sourceforge.net/lists/listinfo/gambas-user > > >>>> > > >>> > > >>> > > >> > > ------------------------------------------------------------------------- > > >>> SF.Net email is sponsored by: > > >>> Check out the new SourceForge.net Marketplace. > > >>> It's the best place to buy or sell services for > > >>> just about anything Open Source. > > >>> http://sourceforge.net/services/buy/index.php > > >>> _______________________________________________ > > >>> Gambas-user mailing list > > >>> Gambas-user at lists.sourceforge.net > > >>> https://lists.sourceforge.net/lists/listinfo/gambas-user > > >> > > >> _________________________________________________________________ > > >> Tecnolog?a, moda, motor, viajes,?suscr?bete a nuestros boletines para > > >> estar a la ?ltima > > >> > > >> > > http://newsletters.msn.com/hm/maintenanceeses.asp?L=ES&C=ES&P=WCMaintenance&Brand=WL&RU=http%3a%2f%2fmail.live.com > > >> > > ------------------------------------------------------------------------- > > >> SF.Net email is sponsored by: > > >> Check out the new SourceForge.net Marketplace. > > >> It's the best place to buy or sell services for > > >> just about anything Open Source. > > >> http://sourceforge.net/services/buy/index.php > > >> _______________________________________________ > > >> Gambas-user mailing list > > >> Gambas-user at lists.sourceforge.net > > >> https://lists.sourceforge.net/lists/listinfo/gambas-user > > >> > > > > > ------------------------------------------------------------------------- > > > SF.Net email is sponsored by: > > > Check out the new SourceForge.net Marketplace. > > > It's the best place to buy or sell services for > > > just about anything Open Source. > > > http://sourceforge.net/services/buy/index.php > > > _______________________________________________ > > > Gambas-user mailing list > > > Gambas-user at lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/gambas-user > > > > _________________________________________________________________ > > Tecnolog?a, moda, motor, viajes,?suscr?bete a nuestros boletines para > > estar a la ?ltima > > > > http://newsletters.msn.com/hm/maintenanceeses.asp?L=ES&C=ES&P=WCMaintenance&Brand=WL&RU=http%3a%2f%2fmail.live.com > > ------------------------------------------------------------------------- > > SF.Net email is sponsored by: > > Check out the new SourceForge.net Marketplace. > > It's the best place to buy or sell services for > > just about anything Open Source. > > http://sourceforge.net/services/buy/index.php > > _______________________________________________ > > Gambas-user mailing list > > Gambas-user at lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/gambas-user > > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user _________________________________________________________________ La vida de los famosos al desnudo en MSN Entretenimiento http://entretenimiento.es.msn.com/ From gambas.fr at ...626... Tue Dec 11 14:09:39 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Tue, 11 Dec 2007 14:09:39 +0100 Subject: [Gambas-user] Highlighting editor query In-Reply-To: <475E887B.9000606@...680...> References: <475E8241.6070808@...680...> <200712111343.27263.gambas@...1...> <475E887B.9000606@...680...> Message-ID: <6324a42a0712110509l49a5b246g62f2d8050ad0f88@...627...> not a simpler editor but the new Editor in gambas2 can be more fined configured 2007/12/11, Mike Keehan : > > Benoit Minisini wrote: > > On mardi 11 d?cembre 2007, Mike Keehan wrote: > >> I am using the highlighting editor in Gambas 1.0.19 to display some > >> plain text for a user to edit. The editor changes all Gambas language > >> words into uppercase, e.g. "and if then" becomes "AND IF THEN". > >> > >> Is there any way to stop it doing this? > >> > >> The editor source code has a number of dictionaries preset with the > >> word list, and a routine to analyse the text, but I can't figure out > >> how to Not Analyse. > >> > >> Mike. > > > > Not in the Gambas 1.x version. But why do you use the source code editor > to > > just edit plain text? > > > > > Ahh, well it had some other useful features when I first wrote the > program. I use the breakpoint facility to mark a particular line in > the text - the colours are used to highlight some things. It was > easier to use that control at the time. > > I guess I should port it all to Gambas 2 now, and use a simpler editor > control. That will give me something interesting to do :) > > Thanks for replying Benoit. > > Cheers, > > Mike. > > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > From psaborio1 at ...43... Tue Dec 11 14:59:16 2007 From: psaborio1 at ...43... (pablo saborio) Date: Tue, 11 Dec 2007 05:59:16 -0800 (PST) Subject: [Gambas-user] Just a Suggestion Message-ID: <983559.4657.qm@...1811...> I was thinking yesterday that, could be a good idea to promote an activity in order to atract people to gambas environment. Specifically, a contest, with symbolic prizes to different categories, would be a good stimulant for the participants, and the winners could have their projects published in gambas site. Sincerely, Pablo Saborio Chac?n. --------------------------------- Looking for last minute shopping deals? Find them fast with Yahoo! Search. From dcamposf at ...626... Tue Dec 11 17:56:08 2007 From: dcamposf at ...626... (Daniel Campos) Date: Tue, 11 Dec 2007 17:56:08 +0100 Subject: [Gambas-user] RC2 soon... In-Reply-To: <200712111226.59067.gambas@...1...> References: <200712111226.59067.gambas@...1...> Message-ID: <7259b5ae0712110856u3345c1e8nc7c5d57528bf202d@...627...> Hi: > * HttpClient.Close seems to forget to do a HttpClient.Stop. Can you look at > this problem Daniel? >From next Monday, I'll be away some days :-( From cjro99 at ...67... Tue Dec 11 22:42:07 2007 From: cjro99 at ...67... (javier romero) Date: Tue, 11 Dec 2007 21:42:07 +0000 Subject: [Gambas-user] try to make Ubuntu package with a proyect In-Reply-To: References: <676409.38360.qm@...1656...> <7259b5ae0712071457u2a8980f9yd5fb9eeeb400764d@...627...> <8eb28a500712100928h33f91d14mffa90db2efc2cfa0@...627...> <8eb28a500712102337s60ac1f2aqe4b2d1edd4773967@...627...> Message-ID: I try again building the package into my home folder and it works, only works inside home folder not ir oder folder. Javier ---------------------------------------- > From: cjro99 at ...67... > To: gambas-user at lists.sourceforge.net > Date: Tue, 11 Dec 2007 13:01:07 +0000 > Subject: Re: [Gambas-user] try to make Ubuntu package with a proyect > > > Hi, > No, i try to make the package in a new directory, not in a external usb disk, the debian/rules files is created inside this directory, i dont know what is happened. Im using ubuntu 7.10. > > Ok, Thanks anyway > > Javier > >> Date: Tue, 11 Dec 2007 08:37:35 +0100 >> From: jredrejo at ...626... >> To: gambas-user at lists.sourceforge.net >> Subject: Re: [Gambas-user] try to make Ubuntu package with a proyect >> >> 2007/12/10, javier romero : >>> >>> >>> Yes, i erase the compile instalation and install the package from ubuntu >>> gutsy gibbon with the Daniels Link and now when i make the ubuntu package of >>> my proyect it doesnt finish and sends me a message error: >>> "/usr/bin/dpkg-buildpackage: 224: debian/rules: permission denied". What >>> permissions i need to change to make the package?. >> >> >> >> It seems that your debian/rules does not have execution permissions. I >> don't have any idea why that's happening to you and don't have any ubuntu to >> test it. In Debian it just works. Some other Ubuntu users have also reported >> that it works so it might be some problem related to the directory where >> you're building the package, maybe it's an external usb disk without >> execution permissions or the Ubuntu version you're using, etc... >> >> >> And what i need to install (minimal) in other PC to run (only run) my >>> proyect? >> >> >> >> >> The dependencies of the generated package will determine it, you only have >> to install the package (when you fix those errors) >> >> Regards. >> >> >> Thanks >>> Javier >>> ---------------------------------------- >>>> Date: Mon, 10 Dec 2007 18:28:06 +0100 >>>> From: jredrejo at ...626... >>>> To: gambas-user at lists.sourceforge.net >>>> Subject: Re: [Gambas-user] try to make Ubuntu package with a proyect >>>> >>>> The lack of the gambas2-gb-form-dialog package points to an old version >>> of >>>> gambas in your system, as >>>> http://packages.debian.org/sid/gambas2-gb-form-dialog really exists. >>>> >>>> Compiling from the sources, you're merging the updated gambas version >>> with >>>> old packages, what can not work. >>>> >>>> I'm afraid Ubuntu and all its satellite versions are not very updated >>> with >>>> Gambas. They haven't copied the Debian packages since some months ago. >>>> >>>> You should use the packages Daniel takes from Debian and recompile to >>> Ubuntu >>>> with the last version as he recommended to you in a previous email, and >>> not >>>> the guadalinex/ubuntu old ones. >>>> >>>> Cheers. >>>> >>>> 2007/12/10, javier romero : >>>>> >>>>> >>>>> Ok, i install ubuntu with the guadalinex package and i try to make a >>>>> ubuntu package with my proyect but when i try this an error is send: >>>>> "/usr/bin/dpkg-buildpackage: 224: debian/rules: permission denied" and >>> the >>>>> .deb is not created. When i compiled gambas for the tar and install >>> them, >>>>> the .deb is created but it sends the error dependencie reference >>>>> "gambas2-gb-form-dialog". >>>>> >>>>> >>>>> What is the minimal gambas package i need to install in other pc where >>> i >>>>> want to run a gambas proyect? only gambas runtime? >>>>> >>>>> Thanks >>>>> Javier >>>>> ---------------------------------------- >>>>>> Date: Fri, 7 Dec 2007 23:57:05 +0100 >>>>>> From: dcamposf at ...626... >>>>>> To: gambas-user at lists.sourceforge.net >>>>>> Subject: Re: [Gambas-user] try to make Ubuntu package with a proyect >>>>>> >>>>>> Try with the updated packages: >>>>>> >>>>>> >>>>> >>> http://danicafe.extreblog.com/200709118041_Gambas-packages-for-Ubuntu-Feisty-and-Guadalinex-v41.html >>>>>> >>>>>> Regards >>>>>> >>>>>> 2007/12/7, javier romero : >>>>>>> >>>>>>> Finally i can build a ubuntu package with my proyect, but when i try >>> to >>>>> install this it can not do because a missing reference >>>>> "gambas2-gb-form-dialog" i try to install this but i can find this >>> package >>>>> in ubuntu repositories. >>>>>>> >>>>>>> Javier >>>>>>> ---------------------------------------- >>>>>>>> From: cjro99 at ...67... >>>>>>>> To: gambas-user at lists.sourceforge.net >>>>>>>> Date: Fri, 7 Dec 2007 14:04:15 +0000 >>>>>>>> Subject: [Gambas-user] try to make Ubuntu package with a proyect >>>>>>>> >>>>>>>> >>>>>>>> I finished a proyect and when i want build a package with there, >>>>> ubuntu and debian options are enabled and a message saids i need to >>> install >>>>> "debhelper", i install there and try again but the options steel >>> enabled and >>>>> gambas not detect i install debhelper. What more i need install? >>>>>>>> >>>>>>>> Thanks >>>>>>>> Javier >>>>>>>> _________________________________________________________________ >>>>>>>> Tecnolog?a, moda, motor, viajes,?suscr?bete a nuestros boletines >>> para >>>>> estar a la ?ltima >>>>>>>> >>>>> >>> http://newsletters.msn.com/hm/maintenanceeses.asp?L=ES&C=ES&P=WCMaintenance&Brand=WL&RU=http%3a%2f%2fmail.live.com >>>>>>>> >>>>> >>> ------------------------------------------------------------------------- >>>>>>>> SF.Net email is sponsored by: >>>>>>>> Check out the new SourceForge.net Marketplace. >>>>>>>> It's the best place to buy or sell services for >>>>>>>> just about anything Open Source. >>>>>>>> http://sourceforge.net/services/buy/index.php >>>>>>>> _______________________________________________ >>>>>>>> Gambas-user mailing list >>>>>>>> Gambas-user at lists.sourceforge.net >>>>>>>> https://lists.sourceforge.net/lists/listinfo/gambas-user >>>>>>> >>>>>>> _________________________________________________________________ >>>>>>> Tecnolog?a, moda, motor, viajes,?suscr?bete a nuestros boletines para >>>>> estar a la ?ltima >>>>>>> >>>>> >>> http://newsletters.msn.com/hm/maintenanceeses.asp?L=ES&C=ES&P=WCMaintenance&Brand=WL&RU=http%3a%2f%2fmail.live.com >>>>>>> >>>>> >>> ------------------------------------------------------------------------- >>>>>>> SF.Net email is sponsored by: >>>>>>> Check out the new SourceForge.net Marketplace. >>>>>>> It's the best place to buy or sell services for >>>>>>> just about anything Open Source. >>>>>>> http://sourceforge.net/services/buy/index.php >>>>>>> _______________________________________________ >>>>>>> Gambas-user mailing list >>>>>>> Gambas-user at lists.sourceforge.net >>>>>>> https://lists.sourceforge.net/lists/listinfo/gambas-user >>>>>>> >>>>>> >>>>>> >>>>> >>> ------------------------------------------------------------------------- >>>>>> SF.Net email is sponsored by: >>>>>> Check out the new SourceForge.net Marketplace. >>>>>> It's the best place to buy or sell services for >>>>>> just about anything Open Source. >>>>>> http://sourceforge.net/services/buy/index.php >>>>>> _______________________________________________ >>>>>> Gambas-user mailing list >>>>>> Gambas-user at lists.sourceforge.net >>>>>> https://lists.sourceforge.net/lists/listinfo/gambas-user >>>>> >>>>> _________________________________________________________________ >>>>> Tecnolog?a, moda, motor, viajes,?suscr?bete a nuestros boletines para >>>>> estar a la ?ltima >>>>> >>>>> >>> http://newsletters.msn.com/hm/maintenanceeses.asp?L=ES&C=ES&P=WCMaintenance&Brand=WL&RU=http%3a%2f%2fmail.live.com >>>>> >>> ------------------------------------------------------------------------- >>>>> SF.Net email is sponsored by: >>>>> Check out the new SourceForge.net Marketplace. >>>>> It's the best place to buy or sell services for >>>>> just about anything Open Source. >>>>> http://sourceforge.net/services/buy/index.php >>>>> _______________________________________________ >>>>> Gambas-user mailing list >>>>> Gambas-user at lists.sourceforge.net >>>>> https://lists.sourceforge.net/lists/listinfo/gambas-user >>>>> >>>> >>> ------------------------------------------------------------------------- >>>> SF.Net email is sponsored by: >>>> Check out the new SourceForge.net Marketplace. >>>> It's the best place to buy or sell services for >>>> just about anything Open Source. >>>> http://sourceforge.net/services/buy/index.php >>>> _______________________________________________ >>>> Gambas-user mailing list >>>> Gambas-user at lists.sourceforge.net >>>> https://lists.sourceforge.net/lists/listinfo/gambas-user >>> >>> _________________________________________________________________ >>> Tecnolog?a, moda, motor, viajes,?suscr?bete a nuestros boletines para >>> estar a la ?ltima >>> >>> http://newsletters.msn.com/hm/maintenanceeses.asp?L=ES&C=ES&P=WCMaintenance&Brand=WL&RU=http%3a%2f%2fmail.live.com >>> ------------------------------------------------------------------------- >>> SF.Net email is sponsored by: >>> Check out the new SourceForge.net Marketplace. >>> It's the best place to buy or sell services for >>> just about anything Open Source. >>> http://sourceforge.net/services/buy/index.php >>> _______________________________________________ >>> Gambas-user mailing list >>> Gambas-user at lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/gambas-user >>> >> ------------------------------------------------------------------------- >> SF.Net email is sponsored by: >> Check out the new SourceForge.net Marketplace. >> It's the best place to buy or sell services for >> just about anything Open Source. >> http://sourceforge.net/services/buy/index.php >> _______________________________________________ >> Gambas-user mailing list >> Gambas-user at lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/gambas-user > > _________________________________________________________________ > La vida de los famosos al desnudo en MSN Entretenimiento > http://entretenimiento.es.msn.com/ > ------------------------------------------------------------------------- > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user _________________________________________________________________ MSN Noticias http://noticias.msn.es/comunidad.aspx From simonart.dominique at ...11... Wed Dec 12 10:17:33 2007 From: simonart.dominique at ...11... (Dominique SIMONART) Date: Wed, 12 Dec 2007 10:17:33 +0100 Subject: [Gambas-user] Problem with collective event procedure Message-ID: <475FA72D.7060902@...11...> Hi everybody, Gambas 1.9.91 OpenSuse 10.3 Kde I'm using an array of picturebox so I write this PUBLIC CardImg AS NEW Object[] and in form_Open For C = 0 to 51 CardImg[C] = NEW PictureBox(ME) AS "Images" . . Next Then I wrote the associated procedure like this PUBLIC PROCEDURE Images_Click() something END This doesn't work, but if you change Click() by MouseDown(), like this PUBLIC PROCEDURE Images_MouseDown() something END it works! So this is an easy workaround, but the sample in the doc show the _Click() way! Am I missing something? regards Dominique From gambas at ...1... Wed Dec 12 10:23:02 2007 From: gambas at ...1... (Benoit Minisini) Date: Wed, 12 Dec 2007 10:23:02 +0100 Subject: [Gambas-user] Problem with collective event procedure In-Reply-To: <475FA72D.7060902@...11...> References: <475FA72D.7060902@...11...> Message-ID: <200712121023.03075.gambas@...1...> On mercredi 12 d?cembre 2007, Dominique SIMONART wrote: > Hi everybody, > > Gambas 1.9.91 OpenSuse 10.3 Kde > I'm using an array of picturebox so I write this > > PUBLIC CardImg AS NEW Object[] > > and in form_Open > > For C = 0 to 51 > CardImg[C] = NEW PictureBox(ME) AS "Images" > . > . > Next > > Then I wrote the associated procedure like this > > PUBLIC PROCEDURE Images_Click() > something > END > This doesn't work, but if you change Click() by MouseDown(), like this > > PUBLIC PROCEDURE Images_MouseDown() > something > END > it works! So this is an easy workaround, but the sample in the doc show > the _Click() way! > > Am I missing something? > regards > > Dominique > > PictureBox has no Click event, so this is normal. -- Benoit Minisini From wig at ...1809... Wed Dec 12 10:42:32 2007 From: wig at ...1809... (wig) Date: Wed, 12 Dec 2007 10:42:32 +0100 (CET) Subject: [Gambas-user] Optimalisation of default name property after copy of a control Message-ID: <64310.81.245.42.41.1197452552.squirrel@...1810...> In the IDE it would be interesting if, after making a copy of a control, the Name property would default to a copy of the name property of the copied control, plus let's say a number. Example: The IDE helps giving good names with giving a standard name, like for the LCD control a new control gets the name "LCDNumber1". When I adjust the control, I adjust properties like color, font etc, and I give it a relevant name for my application like "LCDChannel". The application screen needs repeating similar controls, so I copy the control. Existing LCDNumber control "LCDChannel" copy ctrl-c, paste ctrl-v result "LCDChannel1" (=what I would like it to be) instead of "LCDNumber1" Probably a typical question of a simple GUI user who doesn't use code for making the controls ... Wim From simonart.dominique at ...11... Wed Dec 12 10:54:43 2007 From: simonart.dominique at ...11... (Dominique SIMONART) Date: Wed, 12 Dec 2007 10:54:43 +0100 Subject: [Gambas-user] Problem with collective event procedure In-Reply-To: <200712121023.03075.gambas@...1...> References: <475FA72D.7060902@...11...> <200712121023.03075.gambas@...1...> Message-ID: <475FAFE3.8070602@...11...> Benoit Minisini a ?crit : > On mercredi 12 d?cembre 2007, Dominique SIMONART wrote: > >> Hi everybody, >> >> Gambas 1.9.91 OpenSuse 10.3 Kde >> I'm using an array of picturebox so I write this >> >> PUBLIC CardImg AS NEW Object[] >> >> and in form_Open >> >> For C = 0 to 51 >> CardImg[C] = NEW PictureBox(ME) AS "Images" >> . >> . >> Next >> >> Then I wrote the associated procedure like this >> >> PUBLIC PROCEDURE Images_Click() >> something >> END >> This doesn't work, but if you change Click() by MouseDown(), like this >> >> PUBLIC PROCEDURE Images_MouseDown() >> something >> END >> it works! So this is an easy workaround, but the sample in the doc show >> the _Click() way! >> >> Am I missing something? >> regards >> >> Dominique >> >> >> > > PictureBox has no Click event, so this is normal. > > OUPS !!!! Never think about that! :) Dominique From gambas at ...1... Wed Dec 12 11:00:33 2007 From: gambas at ...1... (Benoit Minisini) Date: Wed, 12 Dec 2007 11:00:33 +0100 Subject: [Gambas-user] Optimalisation of default name property after copy of a control In-Reply-To: <64310.81.245.42.41.1197452552.squirrel@...1810...> References: <64310.81.245.42.41.1197452552.squirrel@...1810...> Message-ID: <200712121100.33987.gambas@...1...> On mercredi 12 d?cembre 2007, wig wrote: > In the IDE it would be interesting if, after making a copy of a control, > the Name property would default to a copy of the name property of the > copied control, plus let's say a number. > > > Example: > > The IDE helps giving good names with giving a standard name, like for the > LCD control a new control gets the name "LCDNumber1". > > When I adjust the control, I adjust properties like color, font etc, and I > give it a relevant name for my application like "LCDChannel". > > The application screen needs repeating similar controls, so I copy the > control. > > Existing LCDNumber control "LCDChannel" > > copy ctrl-c, paste ctrl-v > > result "LCDChannel1" > > (=what I would like it to be) > > instead of "LCDNumber1" > > Probably a typical question of a simple GUI user who doesn't use code for > making the controls ... > > Wim > No problem for changing the default behaviour, but I think other users should give their opinion before. -- Benoit Minisini From ariefbayu at ...626... Wed Dec 12 11:05:43 2007 From: ariefbayu at ...626... (Arief Bayu Purwanto) Date: Wed, 12 Dec 2007 17:05:43 +0700 Subject: [Gambas-user] Optimalisation of default name property after copy of a control In-Reply-To: <200712121100.33987.gambas@...1...> References: <64310.81.245.42.41.1197452552.squirrel@...1810...> <200712121100.33987.gambas@...1...> Message-ID: <976ad9050712120205g783bc496ya8d48d08fd4bb605@...627...> On 12/12/07, Benoit Minisini wrote: > > On mercredi 12 d?cembre 2007, wig wrote: > > In the IDE it would be interesting if, after making a copy of a control, > > the Name property would default to a copy of the name property of the > > copied control, plus let's say a number. > > > > > > Example: > > > > The IDE helps giving good names with giving a standard name, like for > the > > LCD control a new control gets the name "LCDNumber1". > > > > When I adjust the control, I adjust properties like color, font etc, and > I > > give it a relevant name for my application like "LCDChannel". > > > > The application screen needs repeating similar controls, so I copy the > > control. > > > > Existing LCDNumber control "LCDChannel" > > > > copy ctrl-c, paste ctrl-v > > > > result "LCDChannel1" > > > > (=what I would like it to be) > > > > instead of "LCDNumber1" > > > > Probably a typical question of a simple GUI user who doesn't use code > for > > making the controls ... > > > > Wim > > > > No problem for changing the default behaviour, but I think other users > should > give their opinion before. A will VOTE yes to change behavior. But, you can make an option in preferences. -- Daiguren Hy?rinmaru From simonart.dominique at ...11... Wed Dec 12 11:10:47 2007 From: simonart.dominique at ...11... (Dominique SIMONART) Date: Wed, 12 Dec 2007 11:10:47 +0100 Subject: [Gambas-user] Optimalisation of default name property after copy of a control In-Reply-To: <200712121100.33987.gambas@...1...> References: <64310.81.245.42.41.1197452552.squirrel@...1810...> <200712121100.33987.gambas@...1...> Message-ID: <475FB3A7.1020204@...11...> Benoit Minisini a ?crit : > On mercredi 12 d?cembre 2007, wig wrote: > >> In the IDE it would be interesting if, after making a copy of a control, >> the Name property would default to a copy of the name property of the >> copied control, plus let's say a number. >> >> >> Example: >> >> The IDE helps giving good names with giving a standard name, like for the >> LCD control a new control gets the name "LCDNumber1". >> >> When I adjust the control, I adjust properties like color, font etc, and I >> give it a relevant name for my application like "LCDChannel". >> >> The application screen needs repeating similar controls, so I copy the >> control. >> >> Existing LCDNumber control "LCDChannel" >> >> copy ctrl-c, paste ctrl-v >> >> result "LCDChannel1" >> >> (=what I would like it to be) >> >> instead of "LCDNumber1" >> >> Probably a typical question of a simple GUI user who doesn't use code for >> making the controls ... >> >> Wim >> >> > > No problem for changing the default behaviour, but I think other users should > give their opinion before. > > I'm OK to change If you use the ...Number1 form, this imply you don't care about the name of your control so it doesn't matter you change the behavior or not if you use the ...Personal1 form, this is of course important to duplicate the right name! my 2 cents Dominique From gambas at ...1... Wed Dec 12 11:26:37 2007 From: gambas at ...1... (Benoit Minisini) Date: Wed, 12 Dec 2007 11:26:37 +0100 Subject: [Gambas-user] Optimalisation of default name property after copy of a control In-Reply-To: <64310.81.245.42.41.1197452552.squirrel@...1810...> References: <64310.81.245.42.41.1197452552.squirrel@...1810...> Message-ID: <200712121126.38129.gambas@...1...> On mercredi 12 d?cembre 2007, wig wrote: > In the IDE it would be interesting if, after making a copy of a control, > the Name property would default to a copy of the name property of the > copied control, plus let's say a number. > > > Example: > > The IDE helps giving good names with giving a standard name, like for the > LCD control a new control gets the name "LCDNumber1". > > When I adjust the control, I adjust properties like color, font etc, and I > give it a relevant name for my application like "LCDChannel". > > The application screen needs repeating similar controls, so I copy the > control. > > Existing LCDNumber control "LCDChannel" > > copy ctrl-c, paste ctrl-v > > result "LCDChannel1" > > (=what I would like it to be) > > instead of "LCDNumber1" > > Probably a typical question of a simple GUI user who doesn't use code for > making the controls ... > > Wim > Done! -- Benoit Minisini From wig at ...1809... Wed Dec 12 11:27:45 2007 From: wig at ...1809... (wig) Date: Wed, 12 Dec 2007 11:27:45 +0100 (CET) Subject: [Gambas-user] Optimalisation of default name property after copy of a control In-Reply-To: <64310.81.245.42.41.1197452552.squirrel@...1810...> References: <64310.81.245.42.41.1197452552.squirrel@...1810...> Message-ID: <64484.81.245.42.41.1197455265.squirrel@...1810...> Another advantage is Confirmation of origin: There is no other obvious way to see where this instance came from or is copied from, and especially after fine-tuning properties like width, colors etc. in the original, one might want to be sure to have used the right one to copy from. Wim. > > In the IDE it would be interesting if, after making a copy of a control, > the Name property would default to a copy of the name property of the > copied control, plus let's say a number. > > > Example: > > The IDE helps giving good names with giving a standard name, like for the > LCD control a new control gets the name "LCDNumber1". > > When I adjust the control, I adjust properties like color, font etc, and I > give it a relevant name for my application like "LCDChannel". > > The application screen needs repeating similar controls, so I copy the > control. > > Existing LCDNumber control "LCDChannel" > > copy ctrl-c, paste ctrl-v > > result "LCDChannel1" > > (=what I would like it to be) > > instead of "LCDNumber1" > > Probably a typical question of a simple GUI user who doesn't use code for > making the controls ... > > Wim > > > > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > From ronstk at ...239... Wed Dec 12 11:28:43 2007 From: ronstk at ...239... (ron) Date: Wed, 12 Dec 2007 11:28:43 +0100 Subject: [Gambas-user] Optimalisation of default name property after copy of a control In-Reply-To: <200712121100.33987.gambas@...1...> References: <64310.81.245.42.41.1197452552.squirrel@...1810...> <200712121100.33987.gambas@...1...> Message-ID: <200712121128.43555.ronstk@...239...> On Wednesday 12 December 2007 11:00, Benoit Minisini wrote: > On mercredi 12 d?cembre 2007, wig wrote: > > In the IDE it would be interesting if, after making a copy of a control, > > the Name property would default to a copy of the name property of the > > copied control, plus let's say a number. > > > > > > Example: > > > > The IDE helps giving good names with giving a standard name, like for the > > LCD control a new control gets the name "LCDNumber1". > > > > When I adjust the control, I adjust properties like color, font etc, and I > > give it a relevant name for my application like "LCDChannel". > > > > The application screen needs repeating similar controls, so I copy the > > control. > > > > Existing LCDNumber control "LCDChannel" > > > > copy ctrl-c, paste ctrl-v > > > > result "LCDChannel1" > > > > (=what I would like it to be) > > > > instead of "LCDNumber1" > > > > Probably a typical question of a simple GUI user who doesn't use code for > > making the controls ... > > > > Wim > > > > No problem for changing the default behaviour, but I think other users should > give their opinion before. > This is one of the nice things from VB/MSAccess I miss. The copy does not use the orginal control template but the customized available. (I know it is the orginal in fact) VB/MSAccess does not only the name but also font/color/size With the form editor in Access you can adjust set all (including the name) the properties for the control in the control/tool -box to a house style. It can also saved so every form inside the same project can use it. Then all next actions of putting controls on the form uses the house style. For gambas using the copy/past here only the position and name need a change by the IDE and all (almost) other can be the same. I vote for this Ron (cheese) From steven at ...1652... Wed Dec 12 15:38:46 2007 From: steven at ...1652... (Steven Lobbezoo) Date: Wed, 12 Dec 2007 15:38:46 +0100 Subject: [Gambas-user] Optimalisation of default name property after copy of a control In-Reply-To: <200712121128.43555.ronstk@...239...> References: <64310.81.245.42.41.1197452552.squirrel@...1810...> <200712121100.33987.gambas@...1...> <200712121128.43555.ronstk@...239...> Message-ID: <200712121538.46232.steven@...1652...> Yes, yes and yes Steven Le Wednesday 12 December 2007 11:28:43 ron, vous avez ?crit?: > On Wednesday 12 December 2007 11:00, Benoit Minisini wrote: > > On mercredi 12 d?cembre 2007, wig wrote: > > > In the IDE it would be interesting if, after making a copy of a > > > control, the Name property would default to a copy of the name property > > > of the copied control, plus let's say a number. > > > > > > > > > Example: > > > > > > The IDE helps giving good names with giving a standard name, like for > > > the LCD control a new control gets the name "LCDNumber1". > > > > > > When I adjust the control, I adjust properties like color, font etc, > > > and I give it a relevant name for my application like "LCDChannel". > > > > > > The application screen needs repeating similar controls, so I copy the > > > control. > > > > > > Existing LCDNumber control "LCDChannel" > > > > > > copy ctrl-c, paste ctrl-v > > > > > > result "LCDChannel1" > > > > > > (=what I would like it to be) > > > > > > instead of "LCDNumber1" > > > > > > Probably a typical question of a simple GUI user who doesn't use code > > > for making the controls ... > > > > > > Wim > > > > No problem for changing the default behaviour, but I think other users > > should give their opinion before. > > This is one of the nice things from VB/MSAccess I miss. > The copy does not use the orginal control template but the customized > available. (I know it is the orginal in fact) > > VB/MSAccess does not only the name but also font/color/size > With the form editor in Access you can adjust set all (including the name) > the properties for the control in the control/tool -box to a house style. > It can also saved so every form inside the same project can use it. > Then all next actions of putting controls on the form uses the house style. > > For gambas using the copy/past here only the position and name need a > change by the IDE and all (almost) other can be the same. > > I vote for this > > Ron (cheese) > > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user From bundeshund at ...467... Wed Dec 12 15:43:54 2007 From: bundeshund at ...467... (Hans-Martin =?iso-8859-1?q?B=F6hme?=) Date: Wed, 12 Dec 2007 15:43:54 +0100 Subject: [Gambas-user] umlauts and other special characters Message-ID: <200712121543.54841.bundeshund@...467...> Hi all, i have a problem with special characters stored in a MySQL database. I want to create a big vCard and import them into KAdressbook. That works fine so far, but i have problems with special characters e.g. german '?'. What i have done so far: ..open DB 'get the orginal characterset from the DB DBCHARSET = $hConn.Charset ... mytmpstr = Conv$(rData!text, DBCHARSET, "UTF-8") ... 'create vCard-like String into MyvCard as String ... 'save the vCard File.Save("/home/usr/vcardtest.vcf", MyvCard) I tried different charsets, but i see no changes in the output-file. Its allways wrong and allways wrong with the same characters... Any help? Greetings Hans-Martin From m0e.lnx at ...626... Wed Dec 12 19:36:03 2007 From: m0e.lnx at ...626... (M0E Lnx) Date: Wed, 12 Dec 2007 12:36:03 -0600 Subject: [Gambas-user] Dialog.Path problem using gb.gui Message-ID: <1f1e8c1b0712121036v3c950a71yc0cb64d7d4b7b1da@...627...> I'm using gb.gui for my project. After upgrading to RC1, I noticed this weird problem. When I set the dialog path I get this ugly annoying message in the console. (new:9550): Gtk-CRITICAL **: gtk_file_folder_unix_get_info: assertion `strcmp (dirname, folder_unix->filename) == 0' failed My code looks something like this Button1_Click() Dialog.path = "/tmp" if dialog.openfile() then return Textbox1.text = dialog.path END This message does not occur if I set the dialog.path to user.home but it does if I set it to anything else. Any ideas how to get around this? I really dont want to use gb.qt or gb.gtk... I want gb.gui Is this a known bug? From bundeshund at ...467... Wed Dec 12 22:14:08 2007 From: bundeshund at ...467... (Hans-Martin =?iso-8859-1?q?B=F6hme?=) Date: Wed, 12 Dec 2007 22:14:08 +0100 Subject: [Gambas-user] umlauts and other special characters In-Reply-To: <200712121543.54841.bundeshund@...467...> References: <200712121543.54841.bundeshund@...467...> Message-ID: <200712122214.08508.bundeshund@...467...> Uh, the version i use is gambas 1.9.91. I played around a bit and saw while debugging and spectating my application that 'DBCHARSET = $hConn.Charset' gets "UTF-8", what is not right. if I can believe the dump from mysql. It says "latin1" as the used charset. If i dump the DB with mysqldump using '--mysqldump --user=x --password=y --default-character-set=latin1 mytestdb > ~/storeithere.dump' it works. All characters are the right ones in the dump. I debugged and looked into the characters gambas gets from mysql. They are not printable and looks like 2 squares. The wrong characters i get when i dump it without the --default-character-set look like '??' for an german "?" for example. Any help will be great! Greetings Hans-Martin From phil.a.teare at ...1601... Thu Dec 13 11:35:13 2007 From: phil.a.teare at ...1601... (Phil Teare) Date: Thu, 13 Dec 2007 10:35:13 +0000 Subject: [Gambas-user] CGI Message-ID: Hi I'm a very fresh newbie to GAMBAS. Firstly thanks! Great idea, so far, looking very well executed. I'm interested in the idea of the 'ASP like' cgi web app concept. However I can't find any documentation on it. could I have some pointers. I realize it may be a bit fresh, but at the mo, I just want to know whats there and how to try and use it. Many thanks, Phil -- Phil Teare, CTO & Chief Architect, http://www.talklets.com from Textic Ltd. (44) [0] 208 4452871 From gambas.fr at ...626... Thu Dec 13 11:45:13 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Thu, 13 Dec 2007 11:45:13 +0100 Subject: [Gambas-user] CGI In-Reply-To: References: Message-ID: <200712131145.13255.gambas.fr@...626...> Le Thursday 13 December 2007 11:35:13 Phil Teare, vous avez ?crit?: > Hi > > I'm a very fresh newbie to GAMBAS. Firstly thanks! Great idea, so far, > looking very well executed. > > I'm interested in the idea of the 'ASP like' cgi web app concept. However I > can't find any documentation on it. could I have some pointers. I realize > it may be a bit fresh, but at the mo, I just want to know whats there and > how to try and use it. > > Many thanks, > Phil It's really simple, You have a component nammed gb.web For a cgi, you need first have an http server like apache or other that support cgi... Then you make first simple app like : Public Sub Main() Response.Begin() Print "

This is my first Gambas CGI

Response.End End Then you make the executable and store it in your cgi-bin path (generally /usr/lib/cgi-bin by default) and you try it in a navigator : http://localhost/cgi-bin/mycgi.gambas Simple, Look at the doc at http://gambasdoc.org in the gb.web doc gambas doc is a gambas cgi as well as http://www.gambasforge.net So all is possible From phil.teare at ...1813... Thu Dec 13 12:08:31 2007 From: phil.teare at ...1813... (Phil Teare) Date: Thu, 13 Dec 2007 11:08:31 +0000 Subject: [Gambas-user] CGI In-Reply-To: <200712131145.13255.gambas.fr@...626...> References: <200712131145.13255.gambas.fr@...626...> Message-ID: Excellent! Merci. One more question. How would you say a simple GAMBAS CGI compares in terms of speed next to asp.net. Obviously there's lots of dependacies regarding this question. So for example, read a page of text from file, do some string manipulation on it based on a few simple MySQL calls, and serve the result... Just a rough idea would be helpful. Obviously the only way to know for sure is test it on the actual app. But in general, is it the same order of magnitude, faster, slower...? Based on Apache 2 on debain based LINUX, compared to Win 2003 Web Ed running .NET 1.1. Like I say, any input gratefully received. Cheers Phil On 13/12/2007, Fabien Bodard wrote: > > Le Thursday 13 December 2007 11:35:13 Phil Teare, vous avez ?crit: > > Hi > > > > I'm a very fresh newbie to GAMBAS. Firstly thanks! Great idea, so far, > > looking very well executed. > > > > I'm interested in the idea of the 'ASP like' cgi web app concept. > However I > > can't find any documentation on it. could I have some pointers. I > realize > > it may be a bit fresh, but at the mo, I just want to know whats there > and > > how to try and use it. > > > > Many thanks, > > Phil > > It's really simple, > > You have a component nammed gb.web > > For a cgi, you need first have an http server like apache or other that > support cgi... > > Then you make first simple app like : > > Public Sub Main() > > Response.Begin() > > Print "

This is my first Gambas CGI

> > Response.End > > End > > > Then you make the executable and store it in your cgi-bin path > (generally /usr/lib/cgi-bin by default) > > and you try it in a navigator : http://localhost/cgi-bin/mycgi.gambas > > Simple, > Look at the doc at http://gambasdoc.org in the gb.web doc > > gambas doc is a gambas cgi as well as http://www.gambasforge.net > > So all is possible > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services > for just about anything Open Source. > > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > -- Phil Teare, CTO & Chief Architect, http://www.talklets.com from Textic Ltd. (44) [0] 208 4452871 From gambas.fr at ...626... Thu Dec 13 12:54:43 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Thu, 13 Dec 2007 12:54:43 +0100 Subject: [Gambas-user] CGI In-Reply-To: References: <200712131145.13255.gambas.fr@...626...> Message-ID: <6324a42a0712130354rc96c6c0l71c7485a01410c90@...627...> really i don't know... if you know it better than me... you can try to make the benchmarks... 2007/12/13, Phil Teare : > > Excellent! Merci. > > One more question. How would you say a simple GAMBAS CGI compares in terms > of speed next to asp.net. > > Obviously there's lots of dependacies regarding this question. So for > example, read a page of text from file, do some string manipulation on it > based on a few simple MySQL calls, and serve the result... > > Just a rough idea would be helpful. Obviously the only way to know for > sure > is test it on the actual app. But in general, is it the same order of > magnitude, faster, slower...? > > Based on Apache 2 on debain based LINUX, compared to Win 2003 Web Ed > running > .NET 1.1. > > Like I say, any input gratefully received. > > Cheers > Phil > > > On 13/12/2007, Fabien Bodard wrote: > > > > Le Thursday 13 December 2007 11:35:13 Phil Teare, vous avez ?crit: > > > Hi > > > > > > I'm a very fresh newbie to GAMBAS. Firstly thanks! Great idea, so far, > > > looking very well executed. > > > > > > I'm interested in the idea of the 'ASP like' cgi web app concept. > > However I > > > can't find any documentation on it. could I have some pointers. I > > realize > > > it may be a bit fresh, but at the mo, I just want to know whats there > > and > > > how to try and use it. > > > > > > Many thanks, > > > Phil > > > > It's really simple, > > > > You have a component nammed gb.web > > > > For a cgi, you need first have an http server like apache or other that > > support cgi... > > > > Then you make first simple app like : > > > > Public Sub Main() > > > > Response.Begin() > > > > Print "

This is my first Gambas CGI

> > > > Response.End > > > > End > > > > > > Then you make the executable and store it in your cgi-bin path > > (generally /usr/lib/cgi-bin by default) > > > > and you try it in a navigator : http://localhost/cgi-bin/mycgi.gambas > > > > Simple, > > Look at the doc at http://gambasdoc.org in the gb.web doc > > > > gambas doc is a gambas cgi as well as http://www.gambasforge.net > > > > So all is possible > > > > > ------------------------------------------------------------------------- > > SF.Net email is sponsored by: > > Check out the new SourceForge.net Marketplace. > > It's the best place to buy or sell services > > for just about anything Open Source. > > > > > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace > > _______________________________________________ > > Gambas-user mailing list > > Gambas-user at lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/gambas-user > > > > > > -- > Phil Teare, > CTO & Chief Architect, > http://www.talklets.com from Textic Ltd. > (44) [0] 208 4452871 > ------------------------------------------------------------------------- > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services > for just about anything Open Source. > > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > From phil.teare at ...1813... Thu Dec 13 13:04:58 2007 From: phil.teare at ...1813... (Phil Teare) Date: Thu, 13 Dec 2007 12:04:58 +0000 Subject: [Gambas-user] CGI In-Reply-To: <6324a42a0712130354rc96c6c0l71c7485a01410c90@...627...> References: <200712131145.13255.gambas.fr@...626...> <6324a42a0712130354rc96c6c0l71c7485a01410c90@...627...> Message-ID: OK If/when I do, I'll let you know. Cheers Phil On 13/12/2007, Fabien Bodard wrote: > > really i don't know... if you know it better than me... you can try to > make > the benchmarks... > > 2007/12/13, Phil Teare : > > > > Excellent! Merci. > > > > One more question. How would you say a simple GAMBAS CGI compares in > terms > > of speed next to asp.net. > > > > Obviously there's lots of dependacies regarding this question. So for > > example, read a page of text from file, do some string manipulation on > it > > based on a few simple MySQL calls, and serve the result... > > > > Just a rough idea would be helpful. Obviously the only way to know for > > sure > > is test it on the actual app. But in general, is it the same order of > > magnitude, faster, slower...? > > > > Based on Apache 2 on debain based LINUX, compared to Win 2003 Web Ed > > running > > .NET 1.1. > > > > Like I say, any input gratefully received. > > > > Cheers > > Phil > > > > > > On 13/12/2007, Fabien Bodard wrote: > > > > > > Le Thursday 13 December 2007 11:35:13 Phil Teare, vous avez ?crit: > > > > Hi > > > > > > > > I'm a very fresh newbie to GAMBAS. Firstly thanks! Great idea, so > far, > > > > looking very well executed. > > > > > > > > I'm interested in the idea of the 'ASP like' cgi web app concept. > > > However I > > > > can't find any documentation on it. could I have some pointers. I > > > realize > > > > it may be a bit fresh, but at the mo, I just want to know whats > there > > > and > > > > how to try and use it. > > > > > > > > Many thanks, > > > > Phil > > > > > > It's really simple, > > > > > > You have a component nammed gb.web > > > > > > For a cgi, you need first have an http server like apache or other > that > > > support cgi... > > > > > > Then you make first simple app like : > > > > > > Public Sub Main() > > > > > > Response.Begin() > > > > > > Print "

This is my first Gambas CGI

> > > > > > Response.End > > > > > > End > > > > > > > > > Then you make the executable and store it in your cgi-bin path > > > (generally /usr/lib/cgi-bin by default) > > > > > > and you try it in a navigator : http://localhost/cgi-bin/mycgi.gambas > > > > > > Simple, > > > Look at the doc at http://gambasdoc.org in the gb.web doc > > > > > > gambas doc is a gambas cgi as well as http://www.gambasforge.net > > > > > > So all is possible > > > > > > > > > ------------------------------------------------------------------------- > > > SF.Net email is sponsored by: > > > Check out the new SourceForge.net Marketplace. > > > It's the best place to buy or sell services > > > for just about anything Open Source. > > > > > > > > > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace > > > _______________________________________________ > > > Gambas-user mailing list > > > Gambas-user at lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/gambas-user > > > > > > > > > > > -- > > Phil Teare, > > CTO & Chief Architect, > > http://www.talklets.com from Textic Ltd. > > (44) [0] 208 4452871 > > > ------------------------------------------------------------------------- > > SF.Net email is sponsored by: > > Check out the new SourceForge.net Marketplace. > > It's the best place to buy or sell services > > for just about anything Open Source. > > > > > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace > > _______________________________________________ > > Gambas-user mailing list > > Gambas-user at lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/gambas-user > > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services > for just about anything Open Source. > > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > -- Phil Teare, CTO & Chief Architect, http://www.talklets.com from Textic Ltd. (44) [0] 208 4452871 From wspinto at ...1405... Thu Dec 13 17:59:06 2007 From: wspinto at ...1405... (Wellington de Souza Pinto) Date: Thu, 13 Dec 2007 14:59:06 -0200 Subject: [Gambas-user] FileView Drag and Drop questions In-Reply-To: References: Message-ID: <1197565146.476164da95cc5@...1540...> Hi, everyone!!! I'm using the fileview object and the events of Drag'n Dorp not work. Why??? Not iplement yet???? Any help, please. Reguards, Souza, Wellington ___________________________________________________________________________________ Para fazer uma liga??o DDD pra perto ou pra longe, faz um 21. A Embratel tem tarifas muito baratas esperando por voc?. Aproveite! From phil.teare at ...1813... Thu Dec 13 19:12:29 2007 From: phil.teare at ...1813... (Phil Teare) Date: Thu, 13 Dec 2007 18:12:29 +0000 Subject: [Gambas-user] CGI In-Reply-To: <200712131145.13255.gambas.fr@...626...> References: <200712131145.13255.gambas.fr@...626...> Message-ID: Just got my first CGI gambas web app going! Wonderful. setting up CGI on Ubuntu was by far the biggest problem (Apache's instructions don't work/apply to Ubuntu, Google Ubuntu forums for better instructions). The only reason I had trouble with gambas was that I had downloaded v1 not the latest feisty offering (entirely my fault). Thankyou, thank you, thank you... Keep up the good work. You never know, I may be able to help out some day. Phil -- Phil Teare, CTO & Chief Architect, http://www.talklets.com from Textic Ltd. (44) [0] 208 4452871 From gambas at ...1... Thu Dec 13 19:20:09 2007 From: gambas at ...1... (Benoit Minisini) Date: Thu, 13 Dec 2007 19:20:09 +0100 Subject: [Gambas-user] CGI In-Reply-To: References: Message-ID: <200712131920.09775.gambas@...1...> On jeudi 13 d?cembre 2007, Phil Teare wrote: > Hi > > I'm a very fresh newbie to GAMBAS. Firstly thanks! Great idea, so far, > looking very well executed. > > I'm interested in the idea of the 'ASP like' cgi web app concept. However I > can't find any documentation on it. could I have some pointers. I realize > it may be a bit fresh, but at the mo, I just want to know whats there and > how to try and use it. > > Many thanks, > Phil There is no the equivalent of ASP pages (i.e. HTML pages mixed with Gambas code). Otherwise, the gb.web component allows you to manage the sessions, the cookies, the request encoded in URL or in web forms, the response, the response headers, HTML quoting, URL quoting... Regards, -- Benoit Minisini From gambas at ...1... Thu Dec 13 19:23:35 2007 From: gambas at ...1... (Benoit Minisini) Date: Thu, 13 Dec 2007 19:23:35 +0100 Subject: [Gambas-user] CGI In-Reply-To: References: <200712131145.13255.gambas.fr@...626...> Message-ID: <200712131923.35221.gambas@...1...> On jeudi 13 d?cembre 2007, Phil Teare wrote: > Just got my first CGI gambas web app going! Wonderful. > > setting up CGI on Ubuntu was by far the biggest problem (Apache's > instructions don't work/apply to Ubuntu, Google Ubuntu forums for better > instructions). > > The only reason I had trouble with gambas was that I had downloaded v1 not > the latest feisty offering (entirely my fault). > > Thankyou, thank you, thank you... > > Keep up the good work. You never know, I may be able to help out some day. > > Phil I suggest avoiding Apache for a Gambas web application, if possible. For example, I use the thttpd server, which is light and fast. Just try it. The web application I have developed for my boss use it, and I don't know how I could have wrote a faster application, except by writing the CGI script in C. I bet it is faster than any .net application :-) Regards, -- Benoit Minisini From m0e.lnx at ...626... Thu Dec 13 19:50:04 2007 From: m0e.lnx at ...626... (M0E Lnx) Date: Thu, 13 Dec 2007 12:50:04 -0600 Subject: [Gambas-user] Dialog.Path problem using gb.gui In-Reply-To: <1f1e8c1b0712121036v3c950a71yc0cb64d7d4b7b1da@...627...> References: <1f1e8c1b0712121036v3c950a71yc0cb64d7d4b7b1da@...627...> Message-ID: <1f1e8c1b0712131050m6094c5ecv1873637b3f67cfbd@...627...> On Dec 12, 2007 12:36 PM, M0E Lnx wrote: > I'm using gb.gui for my project. After upgrading to RC1, I noticed > this weird problem. > When I set the dialog path I get this ugly annoying message in the console. > > (new:9550): Gtk-CRITICAL **: gtk_file_folder_unix_get_info: assertion > `strcmp (dirname, folder_unix->filename) == 0' failed > > My code looks something like this > > Button1_Click() > Dialog.path = "/tmp" > if dialog.openfile() then return > Textbox1.text = dialog.path > END > > This message does not occur if I set the dialog.path to user.home but > it does if I set it to anything else. > > Any ideas how to get around this? I really dont want to use gb.qt or > gb.gtk... I want gb.gui > Is this a known bug? > Anybody? From phil.teare at ...1813... Thu Dec 13 19:50:18 2007 From: phil.teare at ...1813... (Phil Teare) Date: Thu, 13 Dec 2007 18:50:18 +0000 Subject: [Gambas-user] CGI In-Reply-To: <200712131923.35221.gambas@...1...> References: <200712131145.13255.gambas.fr@...626...> <200712131923.35221.gambas@...1...> Message-ID: > > "I suggest avoiding Apache for a Gambas web application" Why so? Because its bigger than need be? Phil -- Phil Teare, CTO & Chief Architect, http://www.talklets.com from Textic Ltd. (44) [0] 208 4452871 From gambas at ...1... Thu Dec 13 19:53:02 2007 From: gambas at ...1... (Benoit Minisini) Date: Thu, 13 Dec 2007 19:53:02 +0100 Subject: [Gambas-user] CGI In-Reply-To: References: <200712131923.35221.gambas@...1...> Message-ID: <200712131953.02526.gambas@...1...> On jeudi 13 d?cembre 2007, Phil Teare wrote: > > "I suggest avoiding Apache for a Gambas web application" > > Why so? Because its bigger than need be? > > Phil Yes. Unless you need some specific Apache feature of course. -- Benoit Minisini From gambas at ...1... Thu Dec 13 19:53:21 2007 From: gambas at ...1... (Benoit Minisini) Date: Thu, 13 Dec 2007 19:53:21 +0100 Subject: [Gambas-user] Dialog.Path problem using gb.gui In-Reply-To: <1f1e8c1b0712131050m6094c5ecv1873637b3f67cfbd@...627...> References: <1f1e8c1b0712121036v3c950a71yc0cb64d7d4b7b1da@...627...> <1f1e8c1b0712131050m6094c5ecv1873637b3f67cfbd@...627...> Message-ID: <200712131953.21209.gambas@...1...> On jeudi 13 d?cembre 2007, M0E Lnx wrote: > On Dec 12, 2007 12:36 PM, M0E Lnx wrote: > > I'm using gb.gui for my project. After upgrading to RC1, I noticed > > this weird problem. > > When I set the dialog path I get this ugly annoying message in the > > console. > > > > (new:9550): Gtk-CRITICAL **: gtk_file_folder_unix_get_info: assertion > > `strcmp (dirname, folder_unix->filename) == 0' failed > > > > My code looks something like this > > > > Button1_Click() > > Dialog.path = "/tmp" > > if dialog.openfile() then return > > Textbox1.text = dialog.path > > END > > > > This message does not occur if I set the dialog.path to user.home but > > it does if I set it to anything else. > > > > Any ideas how to get around this? I really dont want to use gb.qt or > > gb.gtk... I want gb.gui > > Is this a known bug? > > Anybody? > I will look at that when I have time. -- Benoit Minisini From bundeshund at ...467... Thu Dec 13 20:20:21 2007 From: bundeshund at ...467... (Hans-Martin =?iso-8859-1?q?B=F6hme?=) Date: Thu, 13 Dec 2007 20:20:21 +0100 Subject: [Gambas-user] umlauts and other special characters In-Reply-To: <200712122214.08508.bundeshund@...467...> References: <200712121543.54841.bundeshund@...467...> <200712122214.08508.bundeshund@...467...> Message-ID: <200712132020.21778.bundeshund@...467...> Ok, giving myself the 2nd reply and the answer now :) It has nothing to do with Gambas, its just a setting to the SQL-Engine what can easy be done by a simple SQL-statement: SQLConn.Exec("SET NAMES latin1") will work, if your DB is setted to 'latin1', what seems to be the default value for MySQL. From Karl.Reinl at ...9... Thu Dec 13 22:32:44 2007 From: Karl.Reinl at ...9... (Charlie Reinl) Date: Thu, 13 Dec 2007 22:32:44 +0100 Subject: [Gambas-user] pb with update from svn rev 871 Message-ID: <1197581564.6395.30.camel@...40...> Salut, ran into pb while update from svn, after a longer time. Last Update was rev 653. Send you the log's. (as logs.tar.bz2) Some idea ? -- Amicalment Charlie -------------- next part -------------- A non-text attachment was scrubbed... Name: logs.tar.bz2 Type: application/x-bzip-compressed-tar Size: 11461 bytes Desc: not available URL: From gambas.fr at ...626... Sat Dec 15 15:30:01 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Sat, 15 Dec 2007 15:30:01 +0100 Subject: [Gambas-user] Purpose Message-ID: <200712151530.01478.gambas.fr@...626...> I puspose an idea about to change the contextual menu entry 'select all' target (in the form editor). I d'like it select the children ot the current selected container... I think it will be more usefull as it is difficult to select a group in another container than the form one... in VB the first child selected on container selected init the select rect first point and container, then i mousedown and move and the child in the current container are selected... is it possible in the gambas editor ? Fabien From gambas at ...1... Sun Dec 16 13:28:37 2007 From: gambas at ...1... (Benoit Minisini) Date: Sun, 16 Dec 2007 13:28:37 +0100 Subject: [Gambas-user] pb with update from svn rev 871 In-Reply-To: <1197581564.6395.30.camel@...40...> References: <1197581564.6395.30.camel@...40...> Message-ID: <200712161328.37429.gambas@...1...> On jeudi 13 d?cembre 2007, Charlie Reinl wrote: > Salut, > > ran into pb while update from svn, after a longer time. > Last Update was rev 653. > > Send you the log's. (as logs.tar.bz2) > > Some idea ? You went from 653 to 871 in one shot? Try to remove and checkout everything from scratch, and compile again! Regards, -- Benoit Minisini From gambas at ...1... Sun Dec 16 13:33:47 2007 From: gambas at ...1... (Benoit Minisini) Date: Sun, 16 Dec 2007 13:33:47 +0100 Subject: [Gambas-user] FileView Drag and Drop questions In-Reply-To: <1197565146.476164da95cc5@...1540...> References: <1197565146.476164da95cc5@...1540...> Message-ID: <200712161333.48049.gambas@...1...> On jeudi 13 d?cembre 2007, Wellington de Souza Pinto wrote: > Hi, everyone!!! > > I'm using the fileview object and the events of Drag'n Dorp not work. > Why??? Not iplement yet???? > > Any help, please. > > > Reguards, > > Souza, Wellington FileView does not support Drag & Drop event. If you need it, I suggest you take the source code of FileView and add it yourself. Or you can create a class that inherits FileView and use the Observer class. Search in the mailing-list for the "Problems with some events" thread, and you will find a more detailed answer about this problem. Regards, -- Benoit Minisini From gambas at ...1... Sun Dec 16 13:36:21 2007 From: gambas at ...1... (Benoit Minisini) Date: Sun, 16 Dec 2007 13:36:21 +0100 Subject: [Gambas-user] Dialog.Path problem using gb.gui In-Reply-To: <1f1e8c1b0712121036v3c950a71yc0cb64d7d4b7b1da@...627...> References: <1f1e8c1b0712121036v3c950a71yc0cb64d7d4b7b1da@...627...> Message-ID: <200712161336.21999.gambas@...1...> On mercredi 12 d?cembre 2007, M0E Lnx wrote: > I'm using gb.gui for my project. After upgrading to RC1, I noticed > this weird problem. > When I set the dialog path I get this ugly annoying message in the console. > > (new:9550): Gtk-CRITICAL **: gtk_file_folder_unix_get_info: assertion > `strcmp (dirname, folder_unix->filename) == 0' failed > > My code looks something like this > > Button1_Click() > Dialog.path = "/tmp" > if dialog.openfile() then return > Textbox1.text = dialog.path > END > > This message does not occur if I set the dialog.path to user.home but > it does if I set it to anything else. > > Any ideas how to get around this? I really dont want to use gb.qt or > gb.gtk... I want gb.gui > Is this a known bug? > I do not have this warning message at all. Which version of GTK+ is installed on your system? -- Benoit Minisini From m0e.lnx at ...626... Sun Dec 16 19:49:41 2007 From: m0e.lnx at ...626... (M0E Lnx) Date: Sun, 16 Dec 2007 12:49:41 -0600 Subject: [Gambas-user] Dialog.Path problem using gb.gui In-Reply-To: <200712161336.21999.gambas@...1...> References: <1f1e8c1b0712121036v3c950a71yc0cb64d7d4b7b1da@...627...> <200712161336.21999.gambas@...1...> Message-ID: <1f1e8c1b0712161049p2a20edc9m4c2cea94df7e8824@...627...> not exactly the latest release. I'm about to do a system upgrade in a couple of days and do some more testing to see if it makes any difference. Just out of curiosity which gtk do you run? On 12/16/07, Benoit Minisini wrote: > On mercredi 12 d?cembre 2007, M0E Lnx wrote: > > I'm using gb.gui for my project. After upgrading to RC1, I noticed > > this weird problem. > > When I set the dialog path I get this ugly annoying message in the > console. > > > > (new:9550): Gtk-CRITICAL **: gtk_file_folder_unix_get_info: assertion > > `strcmp (dirname, folder_unix->filename) == 0' failed > > > > My code looks something like this > > > > Button1_Click() > > Dialog.path = "/tmp" > > if dialog.openfile() then return > > Textbox1.text = dialog.path > > END > > > > This message does not occur if I set the dialog.path to user.home but > > it does if I set it to anything else. > > > > Any ideas how to get around this? I really dont want to use gb.qt or > > gb.gtk... I want gb.gui > > Is this a known bug? > > > > I do not have this warning message at all. Which version of GTK+ is > installed > on your system? > > -- > Benoit Minisini > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services > for just about anything Open Source. > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > From gambas at ...1... Sun Dec 16 19:52:39 2007 From: gambas at ...1... (Benoit Minisini) Date: Sun, 16 Dec 2007 19:52:39 +0100 Subject: [Gambas-user] Dialog.Path problem using gb.gui In-Reply-To: <1f1e8c1b0712161049p2a20edc9m4c2cea94df7e8824@...627...> References: <1f1e8c1b0712121036v3c950a71yc0cb64d7d4b7b1da@...627...> <200712161336.21999.gambas@...1...> <1f1e8c1b0712161049p2a20edc9m4c2cea94df7e8824@...627...> Message-ID: <200712161952.39259.gambas@...1...> On dimanche 16 d?cembre 2007, M0E Lnx wrote: > not exactly the latest release. I'm about to do a system upgrade in a > couple of days and do some more testing to see if it makes any > difference. Just out of curiosity which gtk do you run? > 2.12.1 -- Benoit Minisini From Karl.Reinl at ...9... Sun Dec 16 21:00:14 2007 From: Karl.Reinl at ...9... (Charlie Reinl) Date: Sun, 16 Dec 2007 21:00:14 +0100 Subject: [Gambas-user] pb with update from svn rev 871 In-Reply-To: <200712161328.37429.gambas@...1...> References: <1197581564.6395.30.camel@...40...> <200712161328.37429.gambas@...1...> Message-ID: <1197835214.5403.2.camel@...40...> Am Sonntag, den 16.12.2007, 13:28 +0100 schrieb Benoit Minisini: > On jeudi 13 d?cembre 2007, Charlie Reinl wrote: > > Salut, > > > > ran into pb while update from svn, after a longer time. > > Last Update was rev 653. > > > > Send you the log's. (as logs.tar.bz2) > > > > Some idea ? > > You went from 653 to 871 in one shot? > > Try to remove and checkout everything from scratch, and compile again! Salut, Ok, it work's now, Thanks Here a funny one !!! -- Amicalment Charlie -------------- next part -------------- A non-text attachment was scrubbed... Name: gambas-1.9.92.png Type: image/png Size: 65573 bytes Desc: not available URL: From rohnny at ...1248... Sun Dec 16 23:07:43 2007 From: rohnny at ...1248... (R. Stormo) Date: Sun, 16 Dec 2007 14:07:43 -0800 (PST) Subject: [Gambas-user] svn 873 Message-ID: <14367006.post@...1379...> For some verion now I have not been able to open a table from database manager. Taught it would be fixed. But the latest svn nothing happens when try to open database-manager. No error , nothing. Running Ubuntu 7.10/Mint Mix. Regards Rohnny My Gambas Community http://gambasforum.tk -- View this message in context: http://www.nabble.com/svn-873-tp14367006p14367006.html Sent from the gambas-user mailing list archive at Nabble.com. From gambas at ...1... Sun Dec 16 23:15:31 2007 From: gambas at ...1... (Benoit Minisini) Date: Sun, 16 Dec 2007 23:15:31 +0100 Subject: [Gambas-user] svn 873 In-Reply-To: <14367006.post@...1379...> References: <14367006.post@...1379...> Message-ID: <200712162315.31667.gambas@...1...> On dimanche 16 d?cembre 2007, R. Stormo wrote: > For some verion now I have not been able to open a table from database > manager. Taught it would be fixed. But the latest svn nothing happens when > try to open database-manager. No error , nothing. > > Running Ubuntu 7.10/Mint Mix. > > Regards Rohnny > > My Gambas Community http://gambasforum.tk I can't help you if you provide no information except that "it does nothing". Did you try to checkout the sources from scratch and recompile everything? Did you check the output of ./configure, make and make install to see if there were errors? I think that Fabien Bodard has just recompiled svn 873 and that he uses Ubuntu. Maybe he could help us... -- Benoit Minisini From rohnny at ...1248... Mon Dec 17 00:09:27 2007 From: rohnny at ...1248... (R. Stormo) Date: Sun, 16 Dec 2007 15:09:27 -0800 (PST) Subject: [Gambas-user] svn 873 In-Reply-To: <200712162315.31667.gambas@...1...> References: <14367006.post@...1379...> <200712162315.31667.gambas@...1...> Message-ID: <14367615.post@...1379...> Benoit Minisini wrote: > > On dimanche 16 d?cembre 2007, R. Stormo wrote: >> For some verion now I have not been able to open a table from database >> manager. Taught it would be fixed. But the latest svn nothing happens >> when >> try to open database-manager. No error , nothing. >> >> Running Ubuntu 7.10/Mint Mix. >> >> Regards Rohnny >> >> My Gambas Community http://gambasforum.tk > > I can't help you if you provide no information except that "it does > nothing". > Did you try to checkout the sources from scratch and recompile everything? > Did you check the output of ./configure, make and make install to see if > there were errors? > > I think that Fabien Bodard has just recompiled svn 873 and that he uses > Ubuntu. Maybe he could help us... > > -- > Benoit Minisini > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services > for just about anything Open Source. > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > > This I have done. svn update ./reconf-all ./configure make sudo make install Sudo make uninstall Downloaded a brand new version to a new location. ./conf-all , configure, make and install I did manage to get the database-manager up, but still not able to double click on my table to view or edit the table content or definition. This I have not been able to done for many , many svn versions ago. Regards Rohnny My Gambas Community http://gambasforum.tk -- View this message in context: http://www.nabble.com/svn-873-tp14367006p14367615.html Sent from the gambas-user mailing list archive at Nabble.com. From gambas.fr at ...626... Mon Dec 17 00:13:31 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Mon, 17 Dec 2007 00:13:31 +0100 Subject: [Gambas-user] svn 873 In-Reply-To: <200712162315.31667.gambas@...1...> References: <14367006.post@...1379...> <200712162315.31667.gambas@...1...> Message-ID: <200712170013.32498.gambas.fr@...626...> Le Sunday 16 December 2007 23:15:31 Benoit Minisini, vous avez ?crit?: > On dimanche 16 d?cembre 2007, R. Stormo wrote: > > For some verion now I have not been able to open a table from database > > manager. Taught it would be fixed. But the latest svn nothing happens > > when try to open database-manager. No error , nothing. > > > > Running Ubuntu 7.10/Mint Mix. > > > > Regards Rohnny > > > > My Gambas Community http://gambasforum.tk > > I can't help you if you provide no information except that "it does > nothing". Did you try to checkout the sources from scratch and recompile > everything? Did you check the output of ./configure, make and make install > to see if there were errors? > > I think that Fabien Bodard has just recompiled svn 873 and that he uses > Ubuntu. Maybe he could help us... I think you need try to get a proper svn and recompile it... no problem here anymore. From gambas at ...1... Mon Dec 17 00:14:05 2007 From: gambas at ...1... (Benoit Minisini) Date: Mon, 17 Dec 2007 00:14:05 +0100 Subject: [Gambas-user] svn 873 In-Reply-To: <14367615.post@...1379...> References: <14367006.post@...1379...> <200712162315.31667.gambas@...1...> <14367615.post@...1379...> Message-ID: <200712170014.05298.gambas@...1...> On lundi 17 d?cembre 2007, R. Stormo wrote: > Benoit Minisini wrote: > > On dimanche 16 d?cembre 2007, R. Stormo wrote: > >> For some verion now I have not been able to open a table from database > >> manager. Taught it would be fixed. But the latest svn nothing happens > >> when > >> try to open database-manager. No error , nothing. > >> > >> Running Ubuntu 7.10/Mint Mix. > >> > >> Regards Rohnny > >> > >> My Gambas Community http://gambasforum.tk > > > > I can't help you if you provide no information except that "it does > > nothing". > > Did you try to checkout the sources from scratch and recompile > > everything? Did you check the output of ./configure, make and make > > install to see if there were errors? > > > > I think that Fabien Bodard has just recompiled svn 873 and that he uses > > Ubuntu. Maybe he could help us... > > > > -- > > Benoit Minisini > > > > ------------------------------------------------------------------------- > > SF.Net email is sponsored by: > > Check out the new SourceForge.net Marketplace. > > It's the best place to buy or sell services > > for just about anything Open Source. > > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketpl > >ace _______________________________________________ > > Gambas-user mailing list > > Gambas-user at lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/gambas-user > > This I have done. > > svn update > ./reconf-all > ./configure > make > sudo make install > > Sudo make uninstall > Downloaded a brand new version to a new location. > ./conf-all , configure, make and install > I did manage to get the database-manager up, but still not able to double > click on my table to view or edit the table content or definition. This I > have not been able to done for many , many svn versions ago. > > Regards Rohnny > > > My Gambas Community http://gambasforum.tk Can you send me the full output of the entire compilation and installation process? -- Benoit Minisini From gambas.fr at ...626... Mon Dec 17 09:29:17 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Mon, 17 Dec 2007 09:29:17 +0100 Subject: [Gambas-user] Fwd: oracle database connection Message-ID: <200712170929.18502.gambas.fr@...626...> -------------- next part -------------- An embedded message was scrubbed... From: Taufiq Cahyadi Subject: oracle database connection Date: Sun, 16 Dec 2007 21:02:07 -0800 (PST) Size: 1654 URL: From timothy.marshal-nichols at ...247... Mon Dec 17 14:55:06 2007 From: timothy.marshal-nichols at ...247... (timothy) Date: Mon, 17 Dec 2007 13:55:06 -0000 Subject: [Gambas-user] Dialog.Path problem using gb.gui In-Reply-To: <200712161336.21999.gambas@...1...> Message-ID: <001401c840b4$6f6d63b0$6401a8c0@...1587...> > -----Original Message----- > From: gambas-user-bounces at lists.sourceforge.net > [mailto:gambas-user-bounces at lists.sourceforge.net] On Behalf > Of Benoit Minisini > Sent: Sunday, 16 December 2007 12:36 PM > To: mailing list for gambas users > Subject: Re: [Gambas-user] Dialog.Path problem using gb.gui > > > On mercredi 12 d?cembre 2007, M0E Lnx wrote: > > I'm using gb.gui for my project. After upgrading to RC1, I noticed > > this weird problem. When I set the dialog path I get this ugly > > annoying message in the console. > > > > (new:9550): Gtk-CRITICAL **: gtk_file_folder_unix_get_info: > assertion > > `strcmp (dirname, folder_unix->filename) == 0' failed > > > > My code looks something like this > > > > Button1_Click() > > Dialog.path = "/tmp" > > if dialog.openfile() then return > > Textbox1.text = dialog.path > > END > > > > This message does not occur if I set the dialog.path to > user.home but > > it does if I set it to anything else. > > > > Any ideas how to get around this? I really dont want to use > gb.qt or > > gb.gtk... I want gb.gui Is this a known bug? > > > > I do not have this warning message at all. Which version of > GTK+ is installed > on your system? > > -- > Benoit Minisini > I have the same problem. Well it's just an annoying error message really. I am currently running openSUSE 10.2. I think the installed GTK2 version is 2.10.6-13. But with openSUSE update's this taken to 2.10.6-24.2. Hope this helps. 8-{)} Timothy Marshal-Nichols From m0e.lnx at ...626... Mon Dec 17 16:06:14 2007 From: m0e.lnx at ...626... (M0E Lnx) Date: Mon, 17 Dec 2007 09:06:14 -0600 Subject: [Gambas-user] Dialog.Path problem using gb.gui In-Reply-To: <001401c840b4$6f6d63b0$6401a8c0@...1587...> References: <200712161336.21999.gambas@...1...> <001401c840b4$6f6d63b0$6401a8c0@...1587...> Message-ID: <1f1e8c1b0712170706q3c8e187fh3b55883c3163f64f@...627...> I'm having another vector developer upgrade GTK to see if makes a difference. I will report when the results come in. BTW, This is in Vector Linux 5.9 running a 2.10.x version of GTK... On Dec 17, 2007 7:55 AM, timothy wrote: > > > > -----Original Message----- > > From: gambas-user-bounces at lists.sourceforge.net > > [mailto:gambas-user-bounces at lists.sourceforge.net] On Behalf > > Of Benoit Minisini > > Sent: Sunday, 16 December 2007 12:36 PM > > To: mailing list for gambas users > > Subject: Re: [Gambas-user] Dialog.Path problem using gb.gui > > > > > > On mercredi 12 d?cembre 2007, M0E Lnx wrote: > > > I'm using gb.gui for my project. After upgrading to RC1, I noticed > > > this weird problem. When I set the dialog path I get this ugly > > > annoying message in the console. > > > > > > (new:9550): Gtk-CRITICAL **: gtk_file_folder_unix_get_info: > > assertion > > > `strcmp (dirname, folder_unix->filename) == 0' failed > > > > > > My code looks something like this > > > > > > Button1_Click() > > > Dialog.path = "/tmp" > > > if dialog.openfile() then return > > > Textbox1.text = dialog.path > > > END > > > > > > This message does not occur if I set the dialog.path to > > user.home but > > > it does if I set it to anything else. > > > > > > Any ideas how to get around this? I really dont want to use > > gb.qt or > > > gb.gtk... I want gb.gui Is this a known bug? > > > > > > > I do not have this warning message at all. Which version of > > GTK+ is installed > > on your system? > > > > -- > > Benoit Minisini > > > > > I have the same problem. Well it's just an annoying error message > really. > > I am currently running openSUSE 10.2. I think the installed GTK2 version > is 2.10.6-13. But with openSUSE update's this taken to 2.10.6-24.2. > > Hope this helps. > > 8-{)} Timothy Marshal-Nichols > > > > > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services > for just about anything Open Source. > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > From steven at ...1652... Mon Dec 17 16:43:59 2007 From: steven at ...1652... (Steven Lobbezoo) Date: Mon, 17 Dec 2007 16:43:59 +0100 Subject: [Gambas-user] Web access Message-ID: <1197906239.13493.8.camel@...1816...> Hi, I'm developing a small app to read some data from pages on a site internet. Since the site requires a log in, i tried to use curls put / get mechanism to ensure access. This does not work, i suppose the log in system is a bit to complex. So, I used a web browser control. In this way, I can do the login manually, and then start reading the pages I want. This works, but .... I can not find a way to get the (text) data from the browser control to process it . Any ideas ? Steven From gambas.fr at ...626... Mon Dec 17 17:30:57 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Mon, 17 Dec 2007 17:30:57 +0100 Subject: [Gambas-user] Web access In-Reply-To: <1197906239.13493.8.camel@...1816...> References: <1197906239.13493.8.camel@...1816...> Message-ID: <200712171730.57443.gambas.fr@...626...> Le Monday 17 December 2007 16:43:59 Steven Lobbezoo, vous avez ?crit?: > Hi, > > I'm developing a small app to read some data from pages on a site > internet. > Since the site requires a log in, i tried to use curls put / get > mechanism to ensure access. This does not work, i suppose the log in > system is a bit to complex. > So, I used a web browser control. In this way, I can do the login > manually, and then start reading the pages I want. This works, but .... > I can not find a way to get the (text) data from the browser control to > process it . > > Any ideas ? > > Steven have you an exemple of url that i can try ? to see if i can use the curl process for auth access.. Fabien > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services > for just about anything Open Source. > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplac >e _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user From gunartha.nyoman at ...1817... Tue Dec 18 19:58:32 2007 From: gunartha.nyoman at ...1817... (gunartha) Date: Tue, 18 Dec 2007 10:58:32 -0800 Subject: [Gambas-user] connet to postgersql error Message-ID: <004801c841a7$fcabf1d0$0f0010b2@...1818...> hi, I am newbe to use gambas I have installed gambas on linux suse 10.1 and server postgres have run. When I try to connect to server via gambas database manager I get error mesagge : ( I used scanning menu to get listing database server) : Cannot connect to database cannot find driver for database : postgresql (mysql no problem) when I check on software management on depedency setup I donnot see gb.db.postgresql but gb.db.mysql , yes How to fix this problem. Many thank for your help Regards Nyoman/Bali From andrea_bortolan at ...325... Tue Dec 18 12:14:23 2007 From: andrea_bortolan at ...325... (Andrea Bortolan) Date: Tue, 18 Dec 2007 11:14:23 +0000 (GMT) Subject: [Gambas-user] connet to postgersql error Message-ID: <415131.95763.qm@...905...> I think you need to install the postgresql libraries (also the developer), reconfigure and make Gambas again. At the end of the configure task you'll see all the packages that are enabled, you should see,in the list, also the postresql db module. Ciao, Andrea. ----- Messaggio originale ----- Da: gunartha A: mailing list for gambas users Inviato: Marted? 18 dicembre 2007, 19:58:32 Oggetto: [Gambas-user] connet to postgersql error hi, I am newbe to use gambas I have installed gambas on linux suse 10.1 and server postgres have run. When I try to connect to server via gambas database manager I get error mesagge : ( I used scanning menu to get listing database server) : Cannot connect to database cannot find driver for database : postgresql (mysql no problem) when I check on software management on depedency setup I donnot see gb.db.postgresql but gb.db.mysql , yes How to fix this problem. Many thank for your help Regards Nyoman/Bali ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ Gambas-user mailing list Gambas-user at lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user ___________________________________ L'email della prossima generazione? Puoi averla con la nuova Yahoo! Mail: http://it.docs.yahoo.com/nowyoucan.html From wspinto at ...1405... Tue Dec 18 15:10:03 2007 From: wspinto at ...1405... (Wellington de Souza Pinto) Date: Tue, 18 Dec 2007 12:10:03 -0200 Subject: [Gambas-user] error without message Message-ID: <1197987003.4767d4bb26c4c@...1418...> Hi! My program in exporadit times when running close all forms and not return any errors message. Only close. Any ideias???? Reguards, --------------------------------------------------------------- |||||/ Wellington de Souza Pinto C o o ] wspinto at ...1405... ^ -x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x- ___________________________________________________________________________________ Para fazer uma liga??o DDD pra perto ou pra longe, faz um 21. A Embratel tem tarifas muito baratas esperando por voc?. Aproveite! From gambas.fr at ...626... Tue Dec 18 16:12:45 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Tue, 18 Dec 2007 16:12:45 +0100 Subject: [Gambas-user] error without message In-Reply-To: <1197987003.4767d4bb26c4c@...1418...> References: <1197987003.4767d4bb26c4c@...1418...> Message-ID: <6324a42a0712180712w3374bcfdgceeffa359dd19db7@...627...> run it via a console and see if you not have a segfault... The gambas ide seem to not return these errors.. 2007/12/18, Wellington de Souza Pinto : > > Hi! > > My program in exporadit times when running close all forms and not return > any > errors message. Only close. > > Any ideias???? > > Reguards, > > --------------------------------------------------------------- > |||||/ Wellington de Souza Pinto > C o o ] wspinto at ...1405... > ^ > -x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x- > > ___________________________________________________________________________________ > Para fazer uma liga??o DDD pra perto ou pra longe, faz um 21. A Embratel > tem > tarifas muito baratas esperando por voc?. Aproveite! > > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services > for just about anything Open Source. > > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > From gambas.fr at ...626... Tue Dec 18 16:15:55 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Tue, 18 Dec 2007 16:15:55 +0100 Subject: [Gambas-user] connet to postgersql error In-Reply-To: <6324a42a0712180715q595cadbdg97151e45bb58f6e1@...627...> References: <415131.95763.qm@...905...> <6324a42a0712180715q595cadbdg97151e45bb58f6e1@...627...> Message-ID: <6324a42a0712180715vc3e0ccv1dab143f0b2e8ca3@...627...> oups bad thread 2007/12/18, Fabien Bodard : > > you need to install the gb.postgresql driver > > if you have compiled gambas yourself, look if you have the libpsql-dev > package > > > > 2007/12/18, Andrea Bortolan < andrea_bortolan at ...325...>: > > > > I think you need to install the postgresql libraries (also the > > developer), reconfigure and make Gambas again. > > At the end of the configure task you'll see all the packages that are > > enabled, you should see,in the list, also the postresql db module. > > > > Ciao, Andrea. > > > > ----- Messaggio originale ----- > > Da: gunartha < gunartha.nyoman at ...1817...> > > A: mailing list for gambas users > > Inviato: Marted? 18 dicembre 2007, 19:58:32 > > Oggetto: [Gambas-user] connet to postgersql error > > > > hi, > > > > I am newbe to use gambas > > I have installed gambas on linux suse 10.1 and server postgres have > > run. > > > > When I try to connect to server via gambas database manager I get > > error > > mesagge : > > ( I used scanning menu to get listing database server) : > > > > Cannot connect to database > > cannot find driver for database : postgresql (mysql no problem) > > > > when I check on software management on depedency setup I donnot see > > gb.db.postgresql but gb.db.mysql , yes > > > > How to fix this problem. > > > > Many thank for your help > > > > Regards > > Nyoman/Bali > > > > ------------------------------------------------------------------------- > > SF.Net email is sponsored by: > > Check out the new SourceForge.net Marketplace. > > It's the best place to buy or sell services > > for just about anything Open Source. > > > > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace > > _______________________________________________ > > Gambas-user mailing list > > Gambas-user at lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/gambas-user > > > > > > > > > > > > > > ___________________________________ > > L'email della prossima generazione? Puoi averla con la nuova Yahoo! > > Mail: http://it.docs.yahoo.com/nowyoucan.html > > > > ------------------------------------------------------------------------- > > SF.Net email is sponsored by: > > Check out the new SourceForge.net Marketplace. > > It's the best place to buy or sell services > > for just about anything Open Source. > > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace > > > > _______________________________________________ > > Gambas-user mailing list > > Gambas-user at lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/gambas-user > > > > From gambas.fr at ...626... Tue Dec 18 16:15:00 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Tue, 18 Dec 2007 16:15:00 +0100 Subject: [Gambas-user] connet to postgersql error In-Reply-To: <415131.95763.qm@...905...> References: <415131.95763.qm@...905...> Message-ID: <6324a42a0712180715q595cadbdg97151e45bb58f6e1@...627...> you need to install the gb.postgresql driver if you have compiled gambas yourself, look if you have the libpsql-dev package 2007/12/18, Andrea Bortolan : > > I think you need to install the postgresql libraries (also the developer), > reconfigure and make Gambas again. > At the end of the configure task you'll see all the packages that are > enabled, you should see,in the list, also the postresql db module. > > Ciao, Andrea. > > ----- Messaggio originale ----- > Da: gunartha > A: mailing list for gambas users > Inviato: Marted? 18 dicembre 2007, 19:58:32 > Oggetto: [Gambas-user] connet to postgersql error > > hi, > > I am newbe to use gambas > I have installed gambas on linux suse 10.1 and server postgres have > run. > > When I try to connect to server via gambas database manager I get > error > mesagge : > ( I used scanning menu to get listing database server) : > > Cannot connect to database > cannot find driver for database : postgresql (mysql no problem) > > when I check on software management on depedency setup I donnot see > gb.db.postgresql but gb.db.mysql , yes > > How to fix this problem. > > Many thank for your help > > Regards > Nyoman/Bali > ------------------------------------------------------------------------- > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services > for just about anything Open Source. > > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > > > > > > > ___________________________________ > L'email della prossima generazione? Puoi averla con la nuova Yahoo! Mail: > http://it.docs.yahoo.com/nowyoucan.html > ------------------------------------------------------------------------- > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services > for just about anything Open Source. > > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > From gambas at ...1... Tue Dec 18 22:32:56 2007 From: gambas at ...1... (Benoit Minisini) Date: Tue, 18 Dec 2007 22:32:56 +0100 Subject: [Gambas-user] Second Release Candidate Message-ID: <200712182232.56368.gambas@...1...> Hi, gambas users everywhere around the world, The second release candidate is available! Many bugs were found and fixed since the first release candidate. A few new features were added too: * The development environment toolbar icon size now follows the font size. * You can send key events to other applications. * The Observer class can catch events after they have been processed. * GridView cells can display rich text. * You can run an external command when creating the executable. This is useful if, for example, you want upload the executable file to a server automatically. As usual, do read the full ChangeLog, even if you don't understand everything :-) Pending problems or changes are: * The HTTPClient problem that Daniel will fix when he will come back. * A change in the way "select all" works in the IDE form editor. And note that, at the moment, six translations of the development environment are complete: French, Japanese, Swedish, Italian, Spanish and Catalan. It will be cool if translations are available before the final release, but I won't cry if this is not the case. Anyway, enjoy this release! Best regards, -- Benoit Minisini From gambas at ...1... Tue Dec 18 22:38:02 2007 From: gambas at ...1... (Benoit Minisini) Date: Tue, 18 Dec 2007 22:38:02 +0100 Subject: [Gambas-user] Second Release Candidate In-Reply-To: <200712182232.56368.gambas@...1...> References: <200712182232.56368.gambas@...1...> Message-ID: <200712182238.02259.gambas@...1...> On mardi 18 d?cembre 2007, Benoit Minisini wrote: > Hi, gambas users everywhere around the world, > > The second release candidate is available! > > Many bugs were found and fixed since the first release candidate. A few new > features were added too: > > * The development environment toolbar icon size now follows the font size. > > * You can send key events to other applications. > > * The Observer class can catch events after they have been processed. > > * GridView cells can display rich text. > > * You can run an external command when creating the executable. This is > useful if, for example, you want upload the executable file to a server > automatically. > > As usual, do read the full ChangeLog, even if you don't understand > everything :-) > > Pending problems or changes are: > > * The HTTPClient problem that Daniel will fix when he will come back. > > * A change in the way "select all" works in the IDE form editor. > > And note that, at the moment, six translations of the development > environment are complete: French, Japanese, Swedish, Italian, Spanish and > Catalan. > > It will be cool if translations are available before the final release, but > I won't cry if this is not the case. > > Anyway, enjoy this release! > > Best regards, The web site is not yet updated, as sourceforge does not answer... -- Benoit Minisini From rospolosco at ...152... Wed Dec 19 00:20:02 2007 From: rospolosco at ...152... (Stefano Palmeri) Date: Wed, 19 Dec 2007 00:20:02 +0100 Subject: [Gambas-user] Second Release Candidate In-Reply-To: <200712182232.56368.gambas@...1...> References: <200712182232.56368.gambas@...1...> Message-ID: <200712190020.02793.rospolosco@...152...> Alle 22:32, marted? 18 dicembre 2007, Benoit Minisini ha scritto: > Hi, gambas users everywhere around the world, > > The second release candidate is available! > > Many bugs were found and fixed since the first release candidate. A few new > features were added too: > > * The development environment toolbar icon size now follows the font size. > > * You can send key events to other applications. > > * The Observer class can catch events after they have been processed. > > * GridView cells can display rich text. > > * You can run an external command when creating the executable. This is > useful if, for example, you want upload the executable file to a server > automatically. > > As usual, do read the full ChangeLog, even if you don't understand > everything :-) > Hi, Benoit. At this moment, 00:14, the changelog link in latest news points to the stable changelog, not the RC2. Regards, Stefano Latest News 18 Dec 2007 - Gambas 2.0 Second Release Candidate Many bugs were found and fixed since the first release candidate. A few new features were added too: * The development environment toolbar icon size now follows the font size. * You can send key events to other applications. * The Observer class can catch events after they have been processed. * GridView cells can display rich text. Read the ChangeLog for the details. ------------^^^^^^^------------------- > Pending problems or changes are: > > * The HTTPClient problem that Daniel will fix when he will come back. > > * A change in the way "select all" works in the IDE form editor. > > And note that, at the moment, six translations of the development > environment are complete: French, Japanese, Swedish, Italian, Spanish and > Catalan. > > It will be cool if translations are available before the final release, but > I won't cry if this is not the case. > > Anyway, enjoy this release! > > Best regards, From gambas at ...1... Wed Dec 19 00:29:09 2007 From: gambas at ...1... (Benoit Minisini) Date: Wed, 19 Dec 2007 00:29:09 +0100 Subject: [Gambas-user] Second Release Candidate In-Reply-To: <200712190020.02793.rospolosco@...152...> References: <200712182232.56368.gambas@...1...> <200712190020.02793.rospolosco@...152...> Message-ID: <200712190029.09123.gambas@...1...> On mercredi 19 d?cembre 2007, Stefano Palmeri wrote: > Alle 22:32, marted? 18 dicembre 2007, Benoit Minisini ha scritto: > > Hi, gambas users everywhere around the world, > > > > The second release candidate is available! > > > > Many bugs were found and fixed since the first release candidate. A few > > new features were added too: > > > > * The development environment toolbar icon size now follows the font > > size. > > > > * You can send key events to other applications. > > > > * The Observer class can catch events after they have been processed. > > > > * GridView cells can display rich text. > > > > * You can run an external command when creating the executable. This is > > useful if, for example, you want upload the executable file to a server > > automatically. > > > > As usual, do read the full ChangeLog, even if you don't understand > > everything :-) > > Hi, Benoit. At this moment, 00:14, the changelog link > in latest news points to the stable changelog, not the RC2. > > Regards, > > Stefano > > Latest News > 18 Dec 2007 - Gambas 2.0 Second Release Candidate > > Many bugs were found and fixed since the first release candidate. A few new > features were added too: > > * The development environment toolbar icon size now follows the font > size. * You can send key events to other applications. > * The Observer class can catch events after they have been processed. > * GridView cells can display rich text. > > Read the ChangeLog for the details. > ------------^^^^^^^------------------- Oops. -- Benoit Minisini From gunartha.nyoman at ...1817... Wed Dec 19 21:12:28 2007 From: gunartha.nyoman at ...1817... (gunartha) Date: Wed, 19 Dec 2007 12:12:28 -0800 Subject: [Gambas-user] connet to postgersql error References: <415131.95763.qm@...905...> <6324a42a0712180715q595cadbdg97151e45bb58f6e1@...627...> Message-ID: <002c01c8427d$21e218f0$0f0010b2@...1818...> Dear All, When I check in directories : gb.db.postgresql is finded, but gambas cannot connect to postgres database How resolve this matter. ( note : I use rpm on DVD suse 10.1 ) nyoman at ...1819...:/usr/local/lib/gambas2> ls gb.component gb.eval.so gb.compress.bzlib2.la gb.eval.so.0 gb.compress.bzlib2.so gb.eval.so.0.0.0 gb.compress.bzlib2.so.0 gb.gui.component gb.compress.bzlib2.so.0.0.0 gb.gui.la gb.compress.component gb.gui.so gb.compress.la gb.gui.so.0 gb.compress.so gb.gui.so.0.0.0 gb.compress.so.0 gb.image.component gb.compress.so.0.0.0 gb.image.la gb.compress.zlib.la gb.image.so gb.compress.zlib.so gb.image.so.0 gb.compress.zlib.so.0 gb.image.so.0.0.0 gb.compress.zlib.so.0.0.0 gb.la gb.crypt.component gb.net.component gb.crypt.la gb.net.la gb.crypt.so gb.net.smtp.component gb.crypt.so.0 gb.net.smtp.la gb.crypt.so.0.0.0 gb.net.smtp.so gb.db.component gb.net.smtp.so.0 gb.db.la gb.net.smtp.so.0.0.0 gb.db.mysql.la gb.net.so gb.db.mysql.so gb.net.so.0 gb.db.mysql.so.0 gb.net.so.0.0.0 gb.db.mysql.so.0.0.0 gb.opengl.component gb.db.postgresql.la gb.opengl.la gb.db.postgresql.so gb.opengl.so gb.db.postgresql.so.0 gb.opengl.so.0 gb.db.postgresql.so.0.0.0 gb.opengl.so.0.0.0 gb.db.so gb.option.component Thank you Regards Nyoman/Bali ----- Original Message ----- From: "Fabien Bodard" To: "mailing list for gambas users" Sent: Tuesday, December 18, 2007 7:15 AM Subject: Re: [Gambas-user] connet to postgersql error you need to install the gb.postgresql driver if you have compiled gambas yourself, look if you have the libpsql-dev package 2007/12/18, Andrea Bortolan : > > I think you need to install the postgresql libraries (also the developer), > reconfigure and make Gambas again. > At the end of the configure task you'll see all the packages that are > enabled, you should see,in the list, also the postresql db module. > > Ciao, Andrea. > > ----- Messaggio originale ----- > Da: gunartha > A: mailing list for gambas users > Inviato: Marted? 18 dicembre 2007, 19:58:32 > Oggetto: [Gambas-user] connet to postgersql error > > hi, > > I am newbe to use gambas > I have installed gambas on linux suse 10.1 and server postgres have > run. > > When I try to connect to server via gambas database manager I get > error > mesagge : > ( I used scanning menu to get listing database server) : > > Cannot connect to database > cannot find driver for database : postgresql (mysql no problem) > > when I check on software management on depedency setup I donnot see > gb.db.postgresql but gb.db.mysql , yes > > How to fix this problem. > > Many thank for your help > > Regards > Nyoman/Bali > ------------------------------------------------------------------------- > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services > for just about anything Open Source. > > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > > > > > > > ___________________________________ > L'email della prossima generazione? Puoi averla con la nuova Yahoo! Mail: > http://it.docs.yahoo.com/nowyoucan.html > ------------------------------------------------------------------------- > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services > for just about anything Open Source. > > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ Gambas-user mailing list Gambas-user at lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user From gunartha.nyoman at ...1817... Wed Dec 19 16:07:55 2007 From: gunartha.nyoman at ...1817... (gunartha.nyoman) Date: Wed, 19 Dec 2007 22:07:55 +0700 Subject: [Gambas-user] install gambas2 on linux suse10.1 Message-ID: <200712192207.56020.gunartha.nyoman@...1817...> Dear All, I try to install gambas2-1.9.91 on linux suse10.1. linux-z:/home/nyoman/Documents/rpm/gambas2-1.9.91 # ./configure ************************************************************ THESE COMPONENTS ARE DISABLED: - gb.corba - gb.db.firebird - gb.db.odbc - gb.db.sqlite2 - gb.db.sqlite3 - gb.gtk - gb.gtk.svg - gb.net.curl - gb.pdf - gb.qte - gb.sdl - gb.sdl.sound ************************************************************ . . . . linux-z:/home/nyoman/Documents/rpm/gambas2-1.9.91 # make ( I get some error. Apart botton on line error are : ........................ collect2: ld returned 1 exit status make[4]: *** [gb.desktop.la] Error 1 make[4]: Leaving directory `/home/nyoman/Documents/rpm/gambas2-1.9.91/gb.desktop/src' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/home/nyoman/Documents/rpm/gambas2-1.9.91/gb.desktop' make[2]: *** [all] Error 2 make[2]: Leaving directory `/home/nyoman/Documents/rpm/gambas2-1.9.91/gb.desktop' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/nyoman/Documents/rpm/gambas2-1.9.91' make: *** [all] Error 2 linux-z:/home/nyoman/Documents/rpm/gambas2-1.9.91 # I have tried for 5 times but not success. and if your don't mint please tell me how to install gambas software Many thank for your help Regards Nyoman/bali From rospolosco at ...152... Wed Dec 19 10:57:59 2007 From: rospolosco at ...152... (Stefano Palmeri) Date: Wed, 19 Dec 2007 10:57:59 +0100 Subject: [Gambas-user] can't compile gb.desktop Message-ID: <200712191057.59570.rospolosco@...152...> Trying to compile RC2. gb.desktop: checking for IceConnectionNumber in -lICE... yes checking for XTestQueryExtension in -lXtst... no configure: WARNING: *** Desktop-neutral routines is disabled Well, libXtst.so is installed in /usr/X11R6/lib. My ld.so.conf is: /usr/include /usr/lib /usr/local/include /usr/local/lib /usr/X11R6/lib /usr/X11R6/include /usr/i486-slackware-linux/lib /opt/kde/lib /usr/lib/qt/lib /usr/lib/seamonkey My system is Slackware 11.0. Any help will be greatly appreciated. Thanks, Best regards, Stefano Palmeri From epileg at ...626... Wed Dec 19 11:07:58 2007 From: epileg at ...626... (=?UTF-8?B?RXDDrWxlZw==?=) Date: Wed, 19 Dec 2007 11:07:58 +0100 Subject: [Gambas-user] Format$ thousand separator Message-ID: <4768ED7E.1090605@...626...> Hello, I do not get the thousand separator whit the ?format$? function, some examples: PRINT Format$(1000000, "$$,#.00") => EUR 1 000 000,00 PRINT Format$(1000000, "$,#.00") => ? 1 000 000,00 PRINT Format$(1000000, ",#.00") => 1000000,00 What I'm doing wrong? These tests are done in a Ubuntu Gutsy (7.10) with ?ca_ES.UTF-8? locale Regards, Ep?leg. From rospolosco at ...152... Wed Dec 19 11:46:57 2007 From: rospolosco at ...152... (Stefano Palmeri) Date: Wed, 19 Dec 2007 11:46:57 +0100 Subject: [Gambas-user] can't compile gb.desktop [solved] In-Reply-To: <200712191057.59570.rospolosco@...152...> References: <200712191057.59570.rospolosco@...152...> Message-ID: <200712191146.57399.rospolosco@...152...> Alle 10:57, mercoled? 19 dicembre 2007, Stefano Palmeri ha scritto: > Trying to compile RC2. > > gb.desktop: > > checking for IceConnectionNumber in -lICE... yes > checking for XTestQueryExtension in -lXtst... no > configure: WARNING: *** Desktop-neutral routines is disabled > > Well, libXtst.so is installed in /usr/X11R6/lib. > > My ld.so.conf is: > > /usr/include > /usr/lib > /usr/local/include > /usr/local/lib > /usr/X11R6/lib > /usr/X11R6/include > /usr/i486-slackware-linux/lib > /opt/kde/lib > /usr/lib/qt/lib > /usr/lib/seamonkey > > My system is Slackware 11.0. Any help will be > greatly appreciated. Thanks, > > Best regards, > > Stefano Palmeri > Ok. Here's solution: export LDFLAGS="-L/usr/X11R6/lib" ./configure Ciao. > > > > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services > for just about anything Open Source. > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplac >e _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user From gambas at ...1... Wed Dec 19 14:47:08 2007 From: gambas at ...1... (Benoit Minisini) Date: Wed, 19 Dec 2007 14:47:08 +0100 Subject: [Gambas-user] Format$ thousand separator In-Reply-To: <4768ED7E.1090605@...626...> References: <4768ED7E.1090605@...626...> Message-ID: <200712191447.08511.gambas@...1...> On mercredi 19 d?cembre 2007, Ep?leg wrote: > Hello, > > I do not get the thousand separator whit the ?format$? function, some > examples: > > > PRINT Format$(1000000, "$$,#.00") => EUR 1 000 000,00 > > PRINT Format$(1000000, "$,#.00") => ? 1 000 000,00 > > PRINT Format$(1000000, ",#.00") => 1000000,00 > > > What I'm doing wrong? > > These tests are done in a Ubuntu Gutsy (7.10) with ?ca_ES.UTF-8? locale > > Regards, > Ep?leg. > > Apparently, this is a bug! -- Benoit Minisini From gambas at ...1... Wed Dec 19 15:44:11 2007 From: gambas at ...1... (Benoit Minisini) Date: Wed, 19 Dec 2007 15:44:11 +0100 Subject: [Gambas-user] Format$ thousand separator In-Reply-To: <200712191447.08511.gambas@...1...> References: <4768ED7E.1090605@...626...> <200712191447.08511.gambas@...1...> Message-ID: <200712191544.11933.gambas@...1...> On mercredi 19 d?cembre 2007, Benoit Minisini wrote: > On mercredi 19 d?cembre 2007, Ep?leg wrote: > > Hello, > > > > I do not get the thousand separator whit the ?format$? function, some > > examples: > > > > > > PRINT Format$(1000000, "$$,#.00") => EUR 1 000 000,00 > > > > PRINT Format$(1000000, "$,#.00") => ? 1 000 000,00 > > > > PRINT Format$(1000000, ",#.00") => 1000000,00 > > > > > > What I'm doing wrong? > > > > These tests are done in a Ubuntu Gutsy (7.10) with ?ca_ES.UTF-8? locale > > > > Regards, > > Ep?leg. > > Apparently, this is a bug! The last revision now takes thousand separators into account. But be careful that in the GNU locales, many languages have thousand separators only for currencies. So, when a locale does not have any thousands separator, a space is used, and the value is splitted each three digits. Maybe this is a bad idea that will be removed in the future! Regards, -- Benoit Minisini From epileg at ...626... Wed Dec 19 16:59:18 2007 From: epileg at ...626... (=?UTF-8?B?RXDDrWxlZw==?=) Date: Wed, 19 Dec 2007 16:59:18 +0100 Subject: [Gambas-user] Format$ thousand separator In-Reply-To: <200712191544.11933.gambas@...1...> References: <4768ED7E.1090605@...626...> <200712191447.08511.gambas@...1...> <200712191544.11933.gambas@...1...> Message-ID: <47693FD6.7070903@...626...> En/na Benoit Minisini ha escrit: > On mercredi 19 d?cembre 2007, Benoit Minisini wrote: >> On mercredi 19 d?cembre 2007, Ep?leg wrote: >>> Hello, >>> >>> I do not get the thousand separator whit the ?format$? function, some >>> examples: >>> >>> >>> PRINT Format$(1000000, "$$,#.00") => EUR 1 000 000,00 >>> >>> PRINT Format$(1000000, "$,#.00") => ? 1 000 000,00 >>> >>> PRINT Format$(1000000, ",#.00") => 1000000,00 >>> >>> >>> What I'm doing wrong? >>> >>> These tests are done in a Ubuntu Gutsy (7.10) with ?ca_ES.UTF-8? locale >>> >>> Regards, >>> Ep?leg. >> Apparently, this is a bug! > > The last revision now takes thousand separators into account. > > But be careful that in the GNU locales, many languages have thousand > separators only for currencies. > > So, when a locale does not have any thousands separator, a space is used, and > the value is splitted each three digits. Maybe this is a bad idea that will > be removed in the future! > > Regards, > Thanks! In an Ubuntu 7.10 with locale en_US.UTF-8 and en_GB.UTF-8, the thousand separator works fine also with numbers, but with locale ca_ES.UTF-8 and es_ES.UTF-8 do not works with numbers (spaces added). In both cases the currencies thousand separator works fine. Excuse my ignorance but in an Open Office Spread document, format function works correctly with numbers and currencies in all of above locale and I don't know why. Thanks a lot, Ep?leg. From gambas at ...1... Wed Dec 19 17:39:11 2007 From: gambas at ...1... (Benoit Minisini) Date: Wed, 19 Dec 2007 17:39:11 +0100 Subject: [Gambas-user] Format$ thousand separator In-Reply-To: <47693FD6.7070903@...626...> References: <4768ED7E.1090605@...626...> <200712191544.11933.gambas@...1...> <47693FD6.7070903@...626...> Message-ID: <200712191739.12202.gambas@...1...> On mercredi 19 d?cembre 2007, Ep?leg wrote: > En/na Benoit Minisini ha escrit: > > On mercredi 19 d?cembre 2007, Benoit Minisini wrote: > >> On mercredi 19 d?cembre 2007, Ep?leg wrote: > >>> Hello, > >>> > >>> I do not get the thousand separator whit the ?format$? function, some > >>> examples: > >>> > >>> > >>> PRINT Format$(1000000, "$$,#.00") => EUR 1 000 000,00 > >>> > >>> PRINT Format$(1000000, "$,#.00") => ? 1 000 000,00 > >>> > >>> PRINT Format$(1000000, ",#.00") => 1000000,00 > >>> > >>> > >>> What I'm doing wrong? > >>> > >>> These tests are done in a Ubuntu Gutsy (7.10) with ?ca_ES.UTF-8? locale > >>> > >>> Regards, > >>> Ep?leg. > >> > >> Apparently, this is a bug! > > > > The last revision now takes thousand separators into account. > > > > But be careful that in the GNU locales, many languages have thousand > > separators only for currencies. > > > > So, when a locale does not have any thousands separator, a space is used, > > and the value is splitted each three digits. Maybe this is a bad idea > > that will be removed in the future! > > > > Regards, > > Thanks! > > In an Ubuntu 7.10 with locale en_US.UTF-8 and en_GB.UTF-8, the thousand > separator works fine also with numbers, but with locale ca_ES.UTF-8 and > es_ES.UTF-8 do not works with numbers (spaces added). In both cases the > currencies thousand separator works fine. > > Excuse my ignorance but in an Open Office Spread document, format function > works correctly with numbers and currencies in all of above locale and I > don't know why. > > Thanks a lot, > Ep?leg. > The locale information is stored in /usr/share/locale/XXX where XXX is the contents of the LC_* environment variable. Gambas uses this information through the standard Unix API. If I set my environment to es_ES, then I have no standard thousands separator, and a point for currency thousands separator. Maybe Open Office does not use this information. Maybe it uses it, but patches it as Gambas does. For example, KDE uses its own locale information, in the /usr/share/locale/l10n/xxx/entry.desktop file. Regards, -- Benoit Minisini From gambas at ...1... Wed Dec 19 17:41:05 2007 From: gambas at ...1... (Benoit Minisini) Date: Wed, 19 Dec 2007 17:41:05 +0100 Subject: [Gambas-user] install gambas2 on linux suse10.1 In-Reply-To: <200712192207.56020.gunartha.nyoman@...1817...> References: <200712192207.56020.gunartha.nyoman@...1817...> Message-ID: <200712191741.05215.gambas@...1...> On mercredi 19 d?cembre 2007, gunartha.nyoman wrote: > Dear All, > > I try to install gambas2-1.9.91 on linux suse10.1. > > linux-z:/home/nyoman/Documents/rpm/gambas2-1.9.91 # ./configure > ************************************************************ > > THESE COMPONENTS ARE DISABLED: > > - gb.corba > - gb.db.firebird > - gb.db.odbc > - gb.db.sqlite2 > - gb.db.sqlite3 > - gb.gtk > - gb.gtk.svg > - gb.net.curl > - gb.pdf > - gb.qte > - gb.sdl > - gb.sdl.sound > > ************************************************************ > > . > . > . > . > > > linux-z:/home/nyoman/Documents/rpm/gambas2-1.9.91 # make ( I get some > error. Apart botton on line error are : > ........................ > collect2: ld returned 1 exit status > make[4]: *** [gb.desktop.la] Error 1 > make[4]: Leaving directory > `/home/nyoman/Documents/rpm/gambas2-1.9.91/gb.desktop/src' > make[3]: *** [all-recursive] Error 1 > make[3]: Leaving directory > `/home/nyoman/Documents/rpm/gambas2-1.9.91/gb.desktop' > make[2]: *** [all] Error 2 > make[2]: Leaving directory > `/home/nyoman/Documents/rpm/gambas2-1.9.91/gb.desktop' > make[1]: *** [all-recursive] Error 1 > make[1]: Leaving directory `/home/nyoman/Documents/rpm/gambas2-1.9.91' > make: *** [all] Error 2 > linux-z:/home/nyoman/Documents/rpm/gambas2-1.9.91 # > > I have tried for 5 times but not success. > and if your don't mint please tell me how to install gambas software > > Many thank for your help > > Regards > Nyoman/bali > Please provide more information, as explained in the "Reporting a problem" page on the web site. Regards, -- Benoit Minisini From ron at ...1740... Wed Dec 19 20:03:46 2007 From: ron at ...1740... (Ron) Date: Wed, 19 Dec 2007 20:03:46 +0100 Subject: [Gambas-user] Second Release Candidate In-Reply-To: <200712190029.09123.gambas@...1...> References: <200712182232.56368.gambas@...1...> <200712190020.02793.rospolosco@...152...> <200712190029.09123.gambas@...1...> Message-ID: <47696B12.1060003@...1740...> Benoit Minisini wrote: > On mercredi 19 d?cembre 2007, Stefano Palmeri wrote: > >> Alle 22:32, marted? 18 dicembre 2007, Benoit Minisini ha scritto: >> >>> Hi, gambas users everywhere around the world, >>> >>> The second release candidate is available! >>> >>> Many bugs were found and fixed since the first release candidate. A few >>> new features were added too: >>> >>> * The development environment toolbar icon size now follows the font >>> size. >>> >>> * You can send key events to other applications. >>> >>> * The Observer class can catch events after they have been processed. >>> >>> * GridView cells can display rich text. >>> >>> * You can run an external command when creating the executable. This is >>> useful if, for example, you want upload the executable file to a server >>> automatically. >>> >>> As usual, do read the full ChangeLog, even if you don't understand >>> everything :-) >>> >> Hi, Benoit. At this moment, 00:14, the changelog link >> in latest news points to the stable changelog, not the RC2. >> >> Regards, >> >> Stefano >> >> Latest News >> 18 Dec 2007 - Gambas 2.0 Second Release Candidate >> >> Many bugs were found and fixed since the first release candidate. A few new >> features were added too: >> >> * The development environment toolbar icon size now follows the font >> size. * You can send key events to other applications. >> * The Observer class can catch events after they have been processed. >> * GridView cells can display rich text. >> >> Read the ChangeLog for the details. >> ------------^^^^^^^------------------- >> > > Oops. > > Hi, Before I cut and paste my environment: the current svn code needs gb.desktop, otherwise the ide won't start, is this by design? I can't remember this behavior in previous versions. [root at ...51... trunk]# gambas2 ERROR: #27: Cannot load component 'gb.desktop': cannot find library file I have looked in translating gambas to Dutch, but there a lot to translate, there is not much time before the final release i guess? Any other Dutch volunteers? Regards, Ron. From jredrejo at ...626... Wed Dec 19 20:24:28 2007 From: jredrejo at ...626... (=?ISO-8859-1?Q?Jos=E9_Luis_Redrejo?=) Date: Wed, 19 Dec 2007 20:24:28 +0100 Subject: [Gambas-user] create an account in gambasforge Message-ID: <8eb28a500712191124x9ef2b99m93cae3cde7de64b@...627...> Hi, I'm trying to create an account in gambasforge.net, but I always get an object from the server after going to http://www.gambasforge.net/creercompte.g Regards. From mickael+gambas at ...1820... Wed Dec 19 21:05:00 2007 From: mickael+gambas at ...1820... (=?UTF-8?B?TWlja2HDq2wgV29sZmY=?=) Date: Wed, 19 Dec 2007 21:05:00 +0100 Subject: [Gambas-user] Hi da crevette world Message-ID: <4769796C.8010007@...1820...> Hi folks, I'm Micka?l Wolff, and i'm a french programmer living in Alsace (France). So I was disgusting by the MSVB years ago, and I hope Gambas to make Basic less bad to my eyes. That said, I would like to know where are they archives from this mailing list, and its FAQ. Just to not ask again about some stupid questions. I this time, I'll give you the question that push me to this list. I tried to make a singleton class. To to that, I need a private method _new. I check some documentation, and I reach on static class. Is that the way to implement singleton ? Thanks ! And thanks to have write Gambas. -- Micka?l Wolff aka Lupus Michaelis Racine Blog From ron at ...1740... Wed Dec 19 21:27:52 2007 From: ron at ...1740... (Ron) Date: Wed, 19 Dec 2007 21:27:52 +0100 Subject: [Gambas-user] Second Release Candidate In-Reply-To: <47696B12.1060003@...1740...> References: <200712182232.56368.gambas@...1...> <200712190020.02793.rospolosco@...152...> <200712190029.09123.gambas@...1...> <47696B12.1060003@...1740...> Message-ID: <47697EC8.8050701@...1740...> Ron wrote: > Benoit Minisini wrote: > >> On mercredi 19 d?cembre 2007, Stefano Palmeri wrote: >> >> >>> Alle 22:32, marted? 18 dicembre 2007, Benoit Minisini ha scritto: >>> >>> >>>> Hi, gambas users everywhere around the world, >>>> >>>> The second release candidate is available! >>>> >>>> Many bugs were found and fixed since the first release candidate. A few >>>> new features were added too: >>>> >>>> * The development environment toolbar icon size now follows the font >>>> size. >>>> >>>> * You can send key events to other applications. >>>> >>>> * The Observer class can catch events after they have been processed. >>>> >>>> * GridView cells can display rich text. >>>> >>>> * You can run an external command when creating the executable. This is >>>> useful if, for example, you want upload the executable file to a server >>>> automatically. >>>> >>>> As usual, do read the full ChangeLog, even if you don't understand >>>> everything :-) >>>> >>>> >>> Hi, Benoit. At this moment, 00:14, the changelog link >>> in latest news points to the stable changelog, not the RC2. >>> >>> Regards, >>> >>> Stefano >>> >>> Latest News >>> 18 Dec 2007 - Gambas 2.0 Second Release Candidate >>> >>> Many bugs were found and fixed since the first release candidate. A few new >>> features were added too: >>> >>> * The development environment toolbar icon size now follows the font >>> size. * You can send key events to other applications. >>> * The Observer class can catch events after they have been processed. >>> * GridView cells can display rich text. >>> >>> Read the ChangeLog for the details. >>> ------------^^^^^^^------------------- >>> >>> >> Oops. >> >> >> > Hi, > > Before I cut and paste my environment: > > the current svn code needs gb.desktop, otherwise the ide won't start, is > this by design? > I can't remember this behavior in previous versions. > > [root at ...51... trunk]# gambas2 > ERROR: #27: Cannot load component 'gb.desktop': cannot find library file > > I have looked in translating gambas to Dutch, but there a lot to > translate, there is not much time before the final release i guess? > Any other Dutch volunteers? > > Regards, > Ron. > > ok, fixed building gb.deskstop by running: # yum install libXtst-devel (CentOS 5.1) and rebuilding gambas. Regards, Ron From simonart.dominique at ...11... Wed Dec 19 23:57:29 2007 From: simonart.dominique at ...11... (Dominique SIMONART) Date: Wed, 19 Dec 2007 23:57:29 +0100 Subject: [Gambas-user] install gambas2 on linux suse10.1 In-Reply-To: <200712191741.05215.gambas@...1...> References: <200712192207.56020.gunartha.nyoman@...1817...> <200712191741.05215.gambas@...1...> Message-ID: <4769A1D9.7090709@...11...> Benoit Minisini a ?crit : > On mercredi 19 d?cembre 2007, gunartha.nyoman wrote: > >> Dear All, >> >> I try to install gambas2-1.9.91 on linux suse10.1. >> >> linux-z:/home/nyoman/Documents/rpm/gambas2-1.9.91 # ./configure >> ************************************************************ >> >> THESE COMPONENTS ARE DISABLED: >> >> - gb.corba >> - gb.db.firebird >> - gb.db.odbc >> - gb.db.sqlite2 >> - gb.db.sqlite3 >> - gb.gtk >> - gb.gtk.svg >> - gb.net.curl >> - gb.pdf >> - gb.qte >> - gb.sdl >> - gb.sdl.sound >> >> ************************************************************ >> >> . >> . >> . >> . >> >> >> linux-z:/home/nyoman/Documents/rpm/gambas2-1.9.91 # make ( I get some >> error. Apart botton on line error are : >> ........................ >> collect2: ld returned 1 exit status >> make[4]: *** [gb.desktop.la] Error 1 >> make[4]: Leaving directory >> `/home/nyoman/Documents/rpm/gambas2-1.9.91/gb.desktop/src' >> make[3]: *** [all-recursive] Error 1 >> make[3]: Leaving directory >> `/home/nyoman/Documents/rpm/gambas2-1.9.91/gb.desktop' >> make[2]: *** [all] Error 2 >> make[2]: Leaving directory >> `/home/nyoman/Documents/rpm/gambas2-1.9.91/gb.desktop' >> make[1]: *** [all-recursive] Error 1 >> make[1]: Leaving directory `/home/nyoman/Documents/rpm/gambas2-1.9.91' >> make: *** [all] Error 2 >> linux-z:/home/nyoman/Documents/rpm/gambas2-1.9.91 # >> >> I have tried for 5 times but not success. >> and if your don't mint please tell me how to install gambas software >> >> Many thank for your help >> >> Regards >> Nyoman/bali >> >> > > Please provide more information, as explained in the "Reporting a problem" > page on the web site. > > Regards, > > Hi, As I ran on the same problem recently, you could take advantage to read this link http://gambasdoc.org/help/install/opensuse I know this is for OpenSuse 10.2, but I think it is quite acurate for OpenSuse 10.1 too Hope this Help Dominique Simonart From rterry at ...1822... Thu Dec 20 05:42:28 2007 From: rterry at ...1822... (richard terry) Date: Thu, 20 Dec 2007 15:42:28 +1100 Subject: [Gambas-user] Resizing Message-ID: <200712201542.28138.rterry@...1822...> Hi, New to the list/gambas, last programmed in VB back in VB5 days, none since. Thought I'd play with Gambas over the Xmas break. Question. Any quick guide to automatically re-sizing all child controls of form/panel eg tutorial, code examples etc. I've tried some of the properties and so far havn't conceptually mastered what should be simple. Thanks. Richard From epileg at ...626... Thu Dec 20 11:49:41 2007 From: epileg at ...626... (=?UTF-8?B?RXDDrWxlZw==?=) Date: Thu, 20 Dec 2007 11:49:41 +0100 Subject: [Gambas-user] Format$ thousand separator In-Reply-To: <200712191739.12202.gambas@...1...> References: <4768ED7E.1090605@...626...> <200712191544.11933.gambas@...1...> <47693FD6.7070903@...626...> <200712191739.12202.gambas@...1...> Message-ID: <476A48C5.9040204@...626...> En/na Benoit Minisini ha escrit: > On mercredi 19 d?cembre 2007, Ep?leg wrote: >> En/na Benoit Minisini ha escrit: >>> On mercredi 19 d?cembre 2007, Benoit Minisini wrote: >>>> On mercredi 19 d?cembre 2007, Ep?leg wrote: >>>>> Hello, >>>>> >>>>> I do not get the thousand separator whit the ?format$? function, some >>>>> examples: >>>>> >>>>> >>>>> PRINT Format$(1000000, "$$,#.00") => EUR 1 000 000,00 >>>>> >>>>> PRINT Format$(1000000, "$,#.00") => ? 1 000 000,00 >>>>> >>>>> PRINT Format$(1000000, ",#.00") => 1000000,00 >>>>> >>>>> >>>>> What I'm doing wrong? >>>>> >>>>> These tests are done in a Ubuntu Gutsy (7.10) with ?ca_ES.UTF-8? locale >>>>> >>>>> Regards, >>>>> Ep?leg. >>>> Apparently, this is a bug! >>> The last revision now takes thousand separators into account. >>> >>> But be careful that in the GNU locales, many languages have thousand >>> separators only for currencies. >>> >>> So, when a locale does not have any thousands separator, a space is used, >>> and the value is splitted each three digits. Maybe this is a bad idea >>> that will be removed in the future! >>> >>> Regards, >> Thanks! >> >> In an Ubuntu 7.10 with locale en_US.UTF-8 and en_GB.UTF-8, the thousand >> separator works fine also with numbers, but with locale ca_ES.UTF-8 and >> es_ES.UTF-8 do not works with numbers (spaces added). In both cases the >> currencies thousand separator works fine. >> >> Excuse my ignorance but in an Open Office Spread document, format function >> works correctly with numbers and currencies in all of above locale and I >> don't know why. >> >> Thanks a lot, >> Ep?leg. >> > > The locale information is stored in /usr/share/locale/XXX where XXX is the > contents of the LC_* environment variable. > > Gambas uses this information through the standard Unix API. If I set my > environment to es_ES, then I have no standard thousands separator, and a > point for currency thousands separator. > > Maybe Open Office does not use this information. Maybe it uses it, but patches > it as Gambas does. > > For example, KDE uses its own locale information, in > the /usr/share/locale/l10n/xxx/entry.desktop file. > > Regards, > Thank You for Your answer. From gambas at ...1... Thu Dec 20 13:19:47 2007 From: gambas at ...1... (Benoit Minisini) Date: Thu, 20 Dec 2007 13:19:47 +0100 Subject: [Gambas-user] Hi da crevette world In-Reply-To: <4769796C.8010007@...1820...> References: <4769796C.8010007@...1820...> Message-ID: <200712201319.47670.gambas@...1...> On mercredi 19 d?cembre 2007, Micka?l Wolff wrote: > Hi folks, > > I'm Micka?l Wolff, and i'm a french programmer living in Alsace > (France). So I was disgusting by the MSVB years ago, and I hope Gambas > to make Basic less bad to my eyes. > > That said, I would like to know where are they archives from this > mailing list, and its FAQ. Just to not ask again about some stupid > questions. > > I this time, I'll give you the question that push me to this list. I > tried to make a singleton class. To to that, I need a private method > _new. I check some documentation, and I reach on static class. Is that > the way to implement singleton ? > > Thanks ! And thanks to have write Gambas. You can use the CREATE STATIC keyword, and the class name as the only instance. Note that it won't prevent anyone else to instanciate the class. An example of that is the Setting class in the gb.settings component. If you really want to prevent the instanciation, you can put that in the constructor: PUBLIC SUB _new() IF Class[Object.Type(ME)].Count > 1 then Error.Raise("Singleton class") END Regards, -- Benoit Minisini From gambas at ...1... Thu Dec 20 13:22:16 2007 From: gambas at ...1... (Benoit Minisini) Date: Thu, 20 Dec 2007 13:22:16 +0100 Subject: [Gambas-user] Format$ thousand separator In-Reply-To: <476A48C5.9040204@...626...> References: <4768ED7E.1090605@...626...> <200712191739.12202.gambas@...1...> <476A48C5.9040204@...626...> Message-ID: <200712201322.16949.gambas@...1...> On jeudi 20 d?cembre 2007, Ep?leg wrote: > En/na Benoit Minisini ha escrit: > > On mercredi 19 d?cembre 2007, Ep?leg wrote: > >> En/na Benoit Minisini ha escrit: > >>> On mercredi 19 d?cembre 2007, Benoit Minisini wrote: > >>>> On mercredi 19 d?cembre 2007, Ep?leg wrote: > >>>>> Hello, > >>>>> > >>>>> I do not get the thousand separator whit the ?format$? function, some > >>>>> examples: > >>>>> > >>>>> > >>>>> PRINT Format$(1000000, "$$,#.00") => EUR 1 000 000,00 > >>>>> > >>>>> PRINT Format$(1000000, "$,#.00") => ? 1 000 000,00 > >>>>> > >>>>> PRINT Format$(1000000, ",#.00") => 1000000,00 > >>>>> > >>>>> > >>>>> What I'm doing wrong? > >>>>> > >>>>> These tests are done in a Ubuntu Gutsy (7.10) with ?ca_ES.UTF-8? > >>>>> locale > >>>>> > >>>>> Regards, > >>>>> Ep?leg. > >>>> > >>>> Apparently, this is a bug! > >>> > >>> The last revision now takes thousand separators into account. > >>> > >>> But be careful that in the GNU locales, many languages have thousand > >>> separators only for currencies. > >>> > >>> So, when a locale does not have any thousands separator, a space is > >>> used, and the value is splitted each three digits. Maybe this is a bad > >>> idea that will be removed in the future! > >>> > >>> Regards, > >> > >> Thanks! > >> > >> In an Ubuntu 7.10 with locale en_US.UTF-8 and en_GB.UTF-8, the thousand > >> separator works fine also with numbers, but with locale ca_ES.UTF-8 and > >> es_ES.UTF-8 do not works with numbers (spaces added). In both cases the > >> currencies thousand separator works fine. > >> > >> Excuse my ignorance but in an Open Office Spread document, format > >> function works correctly with numbers and currencies in all of above > >> locale and I don't know why. > >> > >> Thanks a lot, > >> Ep?leg. > > > > The locale information is stored in /usr/share/locale/XXX where XXX is > > the contents of the LC_* environment variable. > > > > Gambas uses this information through the standard Unix API. If I set my > > environment to es_ES, then I have no standard thousands separator, and a > > point for currency thousands separator. > > > > Maybe Open Office does not use this information. Maybe it uses it, but > > patches it as Gambas does. > > > > For example, KDE uses its own locale information, in > > the /usr/share/locale/l10n/xxx/entry.desktop file. > > > > Regards, > > Thank You for Your answer. > > From My absolutely ignorance and understanding that this is a locale > problem, isn't a solution to use the currency thousand separator in numbers > when this info is missing? > > Regards, > Ep?leg. > Yes, but if the locale tells that there is no separators with non-currency numbers, maybe it is right? I must know if it is a bug or not to take a decision! -- Benoit Minisini From gambas at ...1... Thu Dec 20 15:08:19 2007 From: gambas at ...1... (Benoit Minisini) Date: Thu, 20 Dec 2007 15:08:19 +0100 Subject: [Gambas-user] Warning with Object.Class()! Message-ID: <200712201508.19633.gambas@...1...> In the last revision, I changed the behaviour of Object.Class(), for coherency reasons. Now Object.Class() returns the class of an object, not the class name. To get the class name, use Object.Type() instead. Sorry for the inconvenience if it disturbs your code too much. Regards, -- Benoit Minisini From gambas at ...1... Thu Dec 20 16:09:02 2007 From: gambas at ...1... (Benoit Minisini) Date: Thu, 20 Dec 2007 16:09:02 +0100 Subject: [Gambas-user] Gambas 3D presentation Message-ID: <200712201609.02247.gambas@...1...> I have posted the presentation I made in Palermo on the website. You can use it and modify it as you like if you want to make a presentation of the new Gambas 2. I inserted a new example too that display any PDF with OpenGL and a few animation. This example was made by Laurent Carlier, and modify by your servant. You can use it too, just to show that Gambas can read a PDF, put it in a OpenGL texture, and display it in a QT window! Maybe Daniel is able to use the output of his webcam as an OpenGL texture. It would be cool too :-) Regards, -- Benoit Minisini From l.alebarde2 at ...402... Fri Dec 21 12:01:22 2007 From: l.alebarde2 at ...402... (l.alebarde2 at ...402...) Date: Fri, 21 Dec 2007 12:01:22 +0100 Subject: [Gambas-user] Hello Message-ID: <1198234882.476b9d02a5179@...1824...> Hello, I am new here. First, I would like to thanks and congratulate all Gambas contributors. As a software engineering amator, I do appratiate it very much. The learning curve is really quick (one evening). Even if I am just an amator, I build my futur with software, and GAMBAS + BASH + C++ are surely my choice. For the story, I tryed Kommander and quickly abandonned it - two days to see it is not mature enough for me. What I do really appraciate in Gambas are : 1) GUI super RAD 2) EXEC and SHELL to glue anything (what was the letmotive of Kommander, but they have failed) 3) access to Qt, KDE objects 4) smart langage 5) access to the deep inside (first motivation to develop Linux drivers fastly and easily I assume ?) As a Gambas end-user, I would like to share with you my whishes. I hope besides that when I will be mature with it, I could contribute. Whishing you the best, Laurent Alebarde Haute-Garonne, FRANCE. From l.alebarde2 at ...402... Fri Dec 21 12:16:04 2007 From: l.alebarde2 at ...402... (l.alebarde2 at ...402...) Date: Fri, 21 Dec 2007 12:16:04 +0100 Subject: [Gambas-user] How to create dynamic widgets ? Message-ID: <1198235764.476ba07444b74@...1824...> Hello, I would like to take benefit of Gambas RAD to design widgets, and then to create them dynamically in the main form. The best would be to generate automatically a CLASS with it from a Gambas IDE tool, from which it would be then possible to create new widgets inherited from it, of course, still using the RAD. That would be fun, isn't it ? Back to reallity, what is the best idiome to do that with what already exists ? Laurent Alebarde. From dcamposf at ...626... Fri Dec 21 12:45:46 2007 From: dcamposf at ...626... (Daniel Campos) Date: Fri, 21 Dec 2007 12:45:46 +0100 Subject: [Gambas-user] How to create dynamic widgets ? In-Reply-To: <1198235764.476ba07444b74@...1824...> References: <1198235764.476ba07444b74@...1824...> Message-ID: <7259b5ae0712210345w60b39a86j10f4b44aa376ff64@...627...> Hi: Well, creating a Widget dinamically is easy: (Inside a form) Dim hBtn as New Button (Me) HBtn.Move(10,10,100,100) HBtn.Text="Hello" ' Don't remember if the following line is neccessary or it's visible since the begginning HBtn.Show() 2007/12/21, l.alebarde2 at ...402... : > > Hello, > > I would like to take benefit of Gambas RAD to design widgets, and then to create > them dynamically in the main form. The best would be to generate automatically a > CLASS with it from a Gambas IDE tool, from which it would be then possible to > create new widgets inherited from it, of course, still using the RAD. > > That would be fun, isn't it ? > > Back to reallity, what is the best idiome to do that with what already exists ? > > Laurent Alebarde. > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > From dcamposf at ...626... Fri Dec 21 12:47:18 2007 From: dcamposf at ...626... (Daniel Campos) Date: Fri, 21 Dec 2007 12:47:18 +0100 Subject: [Gambas-user] How to create dynamic widgets ? In-Reply-To: <7259b5ae0712210345w60b39a86j10f4b44aa376ff64@...627...> References: <1198235764.476ba07444b74@...1824...> <7259b5ae0712210345w60b39a86j10f4b44aa376ff64@...627...> Message-ID: <7259b5ae0712210347j485ef78aw7026d501154b402a@...627...> ...And if you want to create your own widgets you can learn about the UserControl and UserContainer classes that act as a base for new controls. A drawingArea can help too if you need to draw custom things... 2007/12/21, Daniel Campos : > Hi: > > Well, creating a Widget dinamically is easy: > > (Inside a form) > > Dim hBtn as New Button (Me) > > HBtn.Move(10,10,100,100) > HBtn.Text="Hello" > ' Don't remember if the following line is neccessary or it's visible > since the begginning > HBtn.Show() > > > 2007/12/21, l.alebarde2 at ...402... : > > > > Hello, > > > > I would like to take benefit of Gambas RAD to design widgets, and then to create > > them dynamically in the main form. The best would be to generate automatically a > > CLASS with it from a Gambas IDE tool, from which it would be then possible to > > create new widgets inherited from it, of course, still using the RAD. > > > > That would be fun, isn't it ? > > > > Back to reallity, what is the best idiome to do that with what already exists ? > > > > Laurent Alebarde. > > > > ------------------------------------------------------------------------- > > This SF.net email is sponsored by: Microsoft > > Defy all challenges. Microsoft(R) Visual Studio 2005. > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > > _______________________________________________ > > Gambas-user mailing list > > Gambas-user at lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/gambas-user > > > From dcamposf at ...626... Fri Dec 21 12:49:48 2007 From: dcamposf at ...626... (Daniel Campos) Date: Fri, 21 Dec 2007 12:49:48 +0100 Subject: [Gambas-user] Hello In-Reply-To: <1198234882.476b9d02a5179@...1824...> References: <1198234882.476b9d02a5179@...1824...> Message-ID: <7259b5ae0712210349l18fc22cdw3a445379de93e31f@...627...> > 5) access to the deep inside (first motivation to develop Linux drivers fastly > and easily I assume ?) Mmmhh... creating drivers with Gambas? Not easy, you can't enter with Gambas in the Kernel space, but it depends, a new Printer filter could be easier, for example, as it is in user space... From eilert-sprachen at ...221... Fri Dec 21 13:36:18 2007 From: eilert-sprachen at ...221... (Rolf-Werner Eilert) Date: Fri, 21 Dec 2007 13:36:18 +0100 Subject: [Gambas-user] PAE with Gambas 1 or what? Message-ID: <476BB342.9030808@...221...> Hi folks, Our new server has 8 GB RAM. If I want to use it, I either can use PAE which runs well or a 64 Bit system. Gambas doesn't run under 64 Bit normally, but is it possible to tweak it? On the PAE system, I found that Gambas 1 doesn't run. Is there a compiling option to adapt it to such a system? I need the older Gambas to run my apps I wrote before. Rolf From jredrejo at ...626... Fri Dec 21 14:22:44 2007 From: jredrejo at ...626... (=?ISO-8859-1?Q?Jos=E9_Luis_Redrejo?=) Date: Fri, 21 Dec 2007 14:22:44 +0100 Subject: [Gambas-user] PAE with Gambas 1 or what? In-Reply-To: <476BB342.9030808@...221...> References: <476BB342.9030808@...221...> Message-ID: <8eb28a500712210522k15d207cciebbe6533c7974cfc@...627...> I don't understand what's the relation between using a PAE kernel and gambas1. As far as you run an i386 system it should work. That's the main reason for PAE: being able to use more than 4 Gb of RAM in an i386 machine (32 bits system). If you are using a 64 bits system you don't need PAE. Regards. 2007/12/21, Rolf-Werner Eilert : > > Hi folks, > > Our new server has 8 GB RAM. If I want to use it, I either can use PAE > which runs well or a 64 Bit system. > > Gambas doesn't run under 64 Bit normally, but is it possible to tweak it? > > On the PAE system, I found that Gambas 1 doesn't run. Is there a > compiling option to adapt it to such a system? I need the older Gambas > to run my apps I wrote before. > > Rolf > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > From gambas.fr at ...626... Fri Dec 21 22:55:40 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Fri, 21 Dec 2007 22:55:40 +0100 Subject: [Gambas-user] Gambas 3D presentation In-Reply-To: <200712201609.02247.gambas@...1...> References: <200712201609.02247.gambas@...1...> Message-ID: <6324a42a0712211355v6a4d0351yf041ff1421e37d0a@...627...> i've already tested it ... the problem was between the v4l thread and the sdl resfresh one..., i can't put the cam catching in an timer event... in my test there is one year now i was trying to put the webcam picture on a cube faces. 2007/12/20, Benoit Minisini : > > I have posted the presentation I made in Palermo on the website. You can > use > it and modify it as you like if you want to make a presentation of the new > Gambas 2. > > I inserted a new example too that display any PDF with OpenGL and a few > animation. This example was made by Laurent Carlier, and modify by your > servant. > > You can use it too, just to show that Gambas can read a PDF, put it in a > OpenGL texture, and display it in a QT window! Maybe Daniel is able to use > the output of his webcam as an OpenGL texture. It would be cool too :-) > > Regards, > > -- > Benoit Minisini > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > From gambas at ...1... Fri Dec 21 23:00:03 2007 From: gambas at ...1... (Benoit Minisini) Date: Fri, 21 Dec 2007 23:00:03 +0100 Subject: [Gambas-user] Gambas 3D presentation In-Reply-To: <6324a42a0712211355v6a4d0351yf041ff1421e37d0a@...627...> References: <200712201609.02247.gambas@...1...> <6324a42a0712211355v6a4d0351yf041ff1421e37d0a@...627...> Message-ID: <200712212300.03782.gambas@...1...> On vendredi 21 d?cembre 2007, Fabien Bodard wrote: > i've already tested it ... the problem was between the v4l thread and the > sdl resfresh one..., > > i can't put the cam catching in an timer event... in my test there is one > year now i was trying to put the webcam picture on a cube faces. > So you get a delay between what is catched by the webcam and what is displayed on the screen? -- Benoit Minisini From gambas.fr at ...626... Fri Dec 21 23:04:13 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Fri, 21 Dec 2007 23:04:13 +0100 Subject: [Gambas-user] Gambas 3D presentation In-Reply-To: <200712212300.03782.gambas@...1...> References: <200712201609.02247.gambas@...1...> <6324a42a0712211355v6a4d0351yf041ff1421e37d0a@...627...> <200712212300.03782.gambas@...1...> Message-ID: <6324a42a0712211404v752fa375nc7038c2b9c88671d@...627...> no ... a crash but i've not my computer here... maybe laurent remember the problem more than me 2007/12/21, Benoit Minisini : > > On vendredi 21 d?cembre 2007, Fabien Bodard wrote: > > i've already tested it ... the problem was between the v4l thread and > the > > sdl resfresh one..., > > > > i can't put the cam catching in an timer event... in my test there is > one > > year now i was trying to put the webcam picture on a cube faces. > > > > So you get a delay between what is catched by the webcam and what is > displayed > on the screen? > > -- > Benoit Minisini > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > From gambas at ...1... Fri Dec 21 23:06:20 2007 From: gambas at ...1... (Benoit Minisini) Date: Fri, 21 Dec 2007 23:06:20 +0100 Subject: [Gambas-user] Gambas 3D presentation In-Reply-To: <200712212300.03782.gambas@...1...> References: <200712201609.02247.gambas@...1...> <6324a42a0712211355v6a4d0351yf041ff1421e37d0a@...627...> <200712212300.03782.gambas@...1...> Message-ID: <200712212306.20471.gambas@...1...> On vendredi 21 d?cembre 2007, Benoit Minisini wrote: > On vendredi 21 d?cembre 2007, Fabien Bodard wrote: > > i've already tested it ... the problem was between the v4l thread and the > > sdl resfresh one..., > > > > i can't put the cam catching in an timer event... in my test there is one > > year now i was trying to put the webcam picture on a cube faces. > > So you get a delay between what is catched by the webcam and what is \ / ----------------------------- caught --`-' -- Benoit Minisini From rohnny at ...1248... Sat Dec 22 09:40:16 2007 From: rohnny at ...1248... (R. Stormo) Date: Sat, 22 Dec 2007 00:40:16 -0800 (PST) Subject: [Gambas-user] svn 873 In-Reply-To: <14367006.post@...1379...> References: <14367006.post@...1379...> Message-ID: <14467400.post@...1379...> R. Stormo wrote: > > For some verion now I have not been able to open a table from database > manager. Taught it would be fixed. But the latest svn nothing happens when > try to open database-manager. No error , nothing. > > Running Ubuntu 7.10/Mint Mix. > > Regards Rohnny > > My Gambas Community http://gambasforum.tk > > > Have found where the problem is. The right panel was way to out to the right. So when I got it dragged so the window was splittet everything are ok. Regards Rohnny My Gambas Community http://gambasforum.tk -- View this message in context: http://www.nabble.com/svn-873-tp14367006p14467400.html Sent from the gambas-user mailing list archive at Nabble.com. From l.alebarde2 at ...402... Sat Dec 22 12:30:00 2007 From: l.alebarde2 at ...402... (l.alebarde2 at ...402...) Date: Sat, 22 Dec 2007 12:30:00 +0100 Subject: [Gambas-user] How to create dynamic widgets ? Message-ID: <1198323000.476cf5386b9b7@...1824...> Thanks a lot. It is alright, thought not as RAD as I would expect. I have tryed doing widgets with Forms RAD-designed in the IDE. It requires to issue their Raise method when the main form is moved, managing Xscreen & Yscreen widget-Form properties recalculated from X & Y main Form properties. It works, but with lag, making it inappropriate. > Hi: > > Well, creating a Widget dinamically is easy: > > (Inside a form) > > Dim hBtn as New Button (Me) > > HBtn.Move(10,10,100,100) > HBtn.Text="Hello" > ' Don't remember if the following line is neccessary or it's visible > since the begginning > HBtn.Show() > > > 2007/12/21, l.alebarde2 at ...402... : >> >> Hello, >> >> I would like to take benefit of Gambas RAD to design widgets, and then >> to create >> them dynamically in the main form. The best would be to generate >> automatically a >> CLASS with it from a Gambas IDE tool, from which it would be then >> possible to >> create new widgets inherited from it, of course, still using the RAD. >> >> That would be fun, isn't it ? >> >> Back to reallity, what is the best idiome to do that with what already >> exists ? >> >> Laurent Alebarde. From gambas at ...1... Sat Dec 22 11:39:25 2007 From: gambas at ...1... (Benoit Minisini) Date: Sat, 22 Dec 2007 11:39:25 +0100 Subject: [Gambas-user] How to create dynamic widgets ? In-Reply-To: <1198323000.476cf5386b9b7@...1824...> References: <1198323000.476cf5386b9b7@...1824...> Message-ID: <200712221139.25790.gambas@...1...> On samedi 22 d?cembre 2007, l.alebarde2 at ...402... wrote: > Thanks a lot. It is alright, thought not as RAD as I would expect. > > I have tryed doing widgets with Forms RAD-designed in the IDE. It requires > to issue their Raise method when the main form is moved, managing Xscreen & > Yscreen widget-Form properties recalculated from X & Y main Form > properties. It works, but with lag, making it inappropriate. > What the heck are you talking about ??? If you want to see how to make controls, look in the gb.form component sources. Or just use your forms as any other controls, by using containers as their parent when creating them. Regards, -- Benoit Minisini From l.alebarde2 at ...402... Sat Dec 22 12:59:42 2007 From: l.alebarde2 at ...402... (l.alebarde2 at ...402...) Date: Sat, 22 Dec 2007 12:59:42 +0100 Subject: [Gambas-user] xmass whishes Message-ID: <1198324782.476cfc2e6cf26@...1824...> Hello, Here are some few ideas I would like very much in Gambas : 1) When you are in design progress, you may which to redisign somehow, for example change a panel in a scrollview, without to have to redesign the contents. So, make it possible to change the (Class) property in the tool window, with automatic propagation in the whole project. 2) As a complement, but not only, enable (Name) property modification, with automatic propagation in the whole project. OK, we can do it today like this : a) close Gambas b) sed the project files c) re-open gambas. But it would be conveniant to be able to do it in the IDE. Happy xmas, and I insist, deep and sincere congratulations for this great IDE, Laurent Alebarde. From gambas at ...1... Sat Dec 22 12:05:43 2007 From: gambas at ...1... (Benoit Minisini) Date: Sat, 22 Dec 2007 12:05:43 +0100 Subject: [Gambas-user] xmass whishes In-Reply-To: <1198324782.476cfc2e6cf26@...1824...> References: <1198324782.476cfc2e6cf26@...1824...> Message-ID: <200712221205.43429.gambas@...1...> On samedi 22 d?cembre 2007, l.alebarde2 at ...402... wrote: > Hello, > > Here are some few ideas I would like very much in Gambas : > > 1) When you are in design progress, you may which to redisign somehow, for > example change a panel in a scrollview, without to have to redesign the > contents. So, make it possible to change the (Class) property in the tool > window, with automatic propagation in the whole project. > I have already thought about something like that, but I'm not sure that every container can be replaced by any other container. The thing must be studied... > 2) As a complement, but not only, enable (Name) property modification, with > automatic propagation in the whole project. You mean replacing the event handler names when changing the (Name) property, do you? > > OK, we can do it today like this : a) close Gambas b) sed the project files > c) re-open gambas. But it would be conveniant to be able to do it in the > IDE. > > Happy xmas, and I insist, deep and sincere congratulations for this great > IDE, > > Laurent Alebarde. > Regards, -- Benoit Minisini From l.alebarde2 at ...402... Sat Dec 22 17:04:09 2007 From: l.alebarde2 at ...402... (l.alebarde2 at ...402...) Date: Sat, 22 Dec 2007 17:04:09 +0100 Subject: [Gambas-user] problem scrolling a ScrollView filled with dynamicly created widgets Message-ID: <1198339449.476d357924b48@...1824...> Hello, I put several panels in a ScrollView. The pannels are created dynamically and stored in a collection. If I don't make something special, the panels do not scroll when I wheel the mouse. I expected they would. If I use this event to recalculate the panels Y position, taking into account the Y -scroll value, they redraw outside the ScrollView, and overide the form above. When I wheel back, they come back at their initial position. (If you try the enclosed project, one can create new panels by clicking in the panel area – a combo opens – click on the EXEC item). What happens ? Laurent Alebarde. -------------- next part -------------- A non-text attachment was scrubbed... Name: guiTmp.tgz Type: application/x-gzip Size: 4460 bytes Desc: not available URL: From rospolosco at ...152... Sat Dec 22 17:02:01 2007 From: rospolosco at ...152... (Stefano Palmeri) Date: Sat, 22 Dec 2007 17:02:01 +0100 Subject: [Gambas-user] problem scrolling a ScrollView filled with dynamicly created widgets In-Reply-To: <1198339449.476d357924b48@...1824...> References: <1198339449.476d357924b48@...1824...> Message-ID: <200712221702.01827.rospolosco@...152...> Alle 17:04, sabato 22 dicembre 2007, l.alebarde2 at ...402... ha scritto: > Hello, > > I put several panels in a ScrollView. The pannels are created dynamically > and stored in a collection. > > If I don't make something special, the panels do not scroll when I wheel > the mouse. I expected they would. > > If I use this event to recalculate the panels Y position, taking into > account the Y -scroll value, they redraw outside the ScrollView, and > overide the form above. When I wheel back, they come back at their initial > position. > > (If you try the enclosed project, one can create new panels by clicking in > the panel area – a combo opens – click on the EXEC item). > > What happens ? > > Laurent Alebarde. Hi. [OFF TOPIC] for Laurent Alebard. I see that your project is a Gambas 1 project. I read your last e-mails and it seems that you are new to Gambas. So, I think that you should start using _now_ Gambas 2 RC2 that is stable enough and has a lot of extra features. http://gambasdoc.org/help/doc/release?fr If you install RC2, then open your project, the in the IDE go Project-->Compile and it will become a Gambas2 project. Regards, Stefano Palmeri P.S. (why your clock is one hour later?) :-) From gambas at ...1... Sat Dec 22 17:13:27 2007 From: gambas at ...1... (Benoit Minisini) Date: Sat, 22 Dec 2007 17:13:27 +0100 Subject: [Gambas-user] problem scrolling a ScrollView filled with dynamicly created widgets In-Reply-To: <1198339449.476d357924b48@...1824...> References: <1198339449.476d357924b48@...1824...> Message-ID: <200712221713.28017.gambas@...1...> On samedi 22 d?cembre 2007, l.alebarde2 at ...402... wrote: > Hello, > > I put several panels in a ScrollView. The pannels are created dynamically > and stored in a collection. > > If I don't make something special, the panels do not scroll when I wheel > the mouse. I expected they would. And why ? Your controls are children of the Form, not the ScrollView. -- Benoit Minisini From gbv at ...1076... Sat Dec 22 17:27:07 2007 From: gbv at ...1076... (Guillermo Ballester Valor) Date: Sat, 22 Dec 2007 16:27:07 +0000 Subject: [Gambas-user] Gambas2 RC2 packages for openSUSE 10.3 Message-ID: <200712221627.10063.gbv@...1076...> Hello all, I've build the gambas 1.9.92 packages for 32-bit openSUSE 10.3. You can get them from http://ftp.gwdg.de/pub/linux/misc/suser-gbv/rpms/10.3/RPMS/i586/ http://ftp4.gwdg.de/pub/linux/misc/suser-gbv/rpms/10.3/RPMS/i586/ ftp://ftp.gwdg.de/linux/misc/suser-gbv/rpms/10.3/RPMS/i586/ ftp://ftp4.gwdg.de/linux/misc/suser-gbv/rpms/10.3/RPMS/i586/ Enjoy and Merry chirstmas! Guillermo -- Guillermo Ballester Valor gbv at ...1076... http://www.oxixares.com/~gbv Ogijares, Granada - SPAIN From l.alebarde2 at ...402... Sat Dec 22 19:46:05 2007 From: l.alebarde2 at ...402... (l.alebarde2 at ...402...) Date: Sat, 22 Dec 2007 19:46:05 +0100 Subject: [Gambas-user] problem scrolling a ScrollView filled with dynamicly created widgets Message-ID: <1198349165.476d5b6de0a72@...1824...> Of course ! Sorry, and thank you very much. It works now, as soon as I changed the argument of the constructor, from Me (which points actually to the form) to the pointer of the ScrollView. >> Hello, >> >> I put several panels in a ScrollView. The pannels are created >> dynamically >> and stored in a collection. >> >> If I don't make something special, the panels do not scroll when I wheel >> the mouse. I expected they would. > > And why ? Your controls are children of the Form, not the ScrollView. > From epileg at ...626... Sun Dec 23 15:16:08 2007 From: epileg at ...626... (=?UTF-8?B?RXDDrWxlZw==?=) Date: Sun, 23 Dec 2007 15:16:08 +0100 Subject: [Gambas-user] Format$ thousand separator In-Reply-To: <200712201322.16949.gambas@...1...> References: <4768ED7E.1090605@...626...> <200712191739.12202.gambas@...1...> <476A48C5.9040204@...626...> <200712201322.16949.gambas@...1...> Message-ID: <476E6DA8.5020307@...626...> En/na Benoit Minisini ha escrit: > On jeudi 20 d?cembre 2007, Ep?leg wrote: >> En/na Benoit Minisini ha escrit: >>> On mercredi 19 d?cembre 2007, Ep?leg wrote: >>>> En/na Benoit Minisini ha escrit: >>>>> On mercredi 19 d?cembre 2007, Benoit Minisini wrote: >>>>>> On mercredi 19 d?cembre 2007, Ep?leg wrote: >>>>>>> Hello, >>>>>>> >>>>>>> I do not get the thousand separator whit the ?format$? function, some >>>>>>> examples: >>>>>>> >>>>>>> >>>>>>> PRINT Format$(1000000, "$$,#.00") => EUR 1 000 000,00 >>>>>>> >>>>>>> PRINT Format$(1000000, "$,#.00") => ? 1 000 000,00 >>>>>>> >>>>>>> PRINT Format$(1000000, ",#.00") => 1000000,00 >>>>>>> >>>>>>> >>>>>>> What I'm doing wrong? >>>>>>> >>>>>>> These tests are done in a Ubuntu Gutsy (7.10) with ?ca_ES.UTF-8? >>>>>>> locale >>>>>>> >>>>>>> Regards, >>>>>>> Ep?leg. >>>>>> Apparently, this is a bug! >>>>> The last revision now takes thousand separators into account. >>>>> >>>>> But be careful that in the GNU locales, many languages have thousand >>>>> separators only for currencies. >>>>> >>>>> So, when a locale does not have any thousands separator, a space is >>>>> used, and the value is splitted each three digits. Maybe this is a bad >>>>> idea that will be removed in the future! >>>>> >>>>> Regards, >>>> Thanks! >>>> >>>> In an Ubuntu 7.10 with locale en_US.UTF-8 and en_GB.UTF-8, the thousand >>>> separator works fine also with numbers, but with locale ca_ES.UTF-8 and >>>> es_ES.UTF-8 do not works with numbers (spaces added). In both cases the >>>> currencies thousand separator works fine. >>>> >>>> Excuse my ignorance but in an Open Office Spread document, format >>>> function works correctly with numbers and currencies in all of above >>>> locale and I don't know why. >>>> >>>> Thanks a lot, >>>> Ep?leg. >>> The locale information is stored in /usr/share/locale/XXX where XXX is >>> the contents of the LC_* environment variable. >>> >>> Gambas uses this information through the standard Unix API. If I set my >>> environment to es_ES, then I have no standard thousands separator, and a >>> point for currency thousands separator. >>> >>> Maybe Open Office does not use this information. Maybe it uses it, but >>> patches it as Gambas does. >>> >>> For example, KDE uses its own locale information, in >>> the /usr/share/locale/l10n/xxx/entry.desktop file. >>> >>> Regards, >> Thank You for Your answer. >> >> From My absolutely ignorance and understanding that this is a locale >> problem, isn't a solution to use the currency thousand separator in numbers >> when this info is missing? >> >> Regards, >> Ep?leg. >> > > Yes, but if the locale tells that there is no separators with non-currency > numbers, maybe it is right? I must know if it is a bug or not to take a > decision! > In my system, Ubuntu 7.10, I got this: $ LANG=ca_ES.UTF-8 locale -k LC_NUMERIC decimal_point="," thousands_sep="" grouping=-1;-1 numeric-decimal-point-wc=44 numeric-thousands-sep-wc=0 numeric-codeset="UTF-8" $ LANG=es_ES.UTF-8 locale -k LC_NUMERIC decimal_point="," thousands_sep="" grouping=-1;-1 numeric-decimal-point-wc=44 numeric-thousands-sep-wc=0 numeric-codeset="UTF-8" $ LANG=es_AR.UTF-8 locale -k LC_NUMERIC decimal_point="," thousands_sep="." grouping=3;3 numeric-decimal-point-wc=44 numeric-thousands-sep-wc=46 numeric-codeset="UTF-8" $ LANG=en_US.UTF-8 locale -k LC_NUMERIC decimal_point="." thousands_sep="," grouping=3;3 numeric-decimal-point-wc=46 numeric-thousands-sep-wc=44 numeric-codeset="UTF-8" $ LANG=fr_FR.UTF-8 locale -k LC_NUMERIC decimal_point="," thousands_sep=" " grouping=3;3 numeric-decimal-point-wc=44 numeric-thousands-sep-wc=32 numeric-codeset="UTF-8" $ LANG=de_DE.UTF-8 locale -k LC_NUMERIC decimal_point="," thousands_sep="." grouping=3;3 numeric-decimal-point-wc=44 numeric-thousands-sep-wc=46 numeric-codeset="UTF-8" Gambas2 do as locale informs so isn't a Gambas2 bug. For me is clear that this is a bug in the data of Catalan and Spanish locale. There are 3 fields with wrong thousands data. Do You know the way to solve this bug? Regards, Ep?leg. From piresl at ...626... Sun Dec 23 21:02:05 2007 From: piresl at ...626... (lawrence pires) Date: Sun, 23 Dec 2007 20:02:05 +0000 Subject: [Gambas-user] Print variables without spaces? Message-ID: <37c460f60712231202s66c906daw98da3d3bcb08df2c@...627...> Only found Gambas over the weekend and have been hooked. But im stuck and m wondering if any of you will help me, I have 2 variables and im trying to print both without a space in between?. Heres my problem. DIM your_movie AS String your_movie = "/your_video.mpg" PRINT Textbox2.Text, your_movie the above outputs /home /your_video.mpg I need it to print /home/your_video.mpg On another note: Im after some documentation on how to create new lines, carriage returns, spaces in strings and also in Print email me piresl at ...626... Thanks for reading From rospolosco at ...152... Sun Dec 23 21:55:27 2007 From: rospolosco at ...152... (Stefano Palmeri) Date: Sun, 23 Dec 2007 21:55:27 +0100 Subject: [Gambas-user] Print variables without spaces? In-Reply-To: <37c460f60712231202s66c906daw98da3d3bcb08df2c@...627...> References: <37c460f60712231202s66c906daw98da3d3bcb08df2c@...627...> Message-ID: <200712232155.27640.rospolosco@...152...> Alle 21:02, domenica 23 dicembre 2007, lawrence pires ha scritto: > Only found Gambas over the weekend and have been hooked. > But im stuck and m wondering if any of you will help me, > > I have 2 variables and im trying to print both without a space in between?. > > Heres my problem. > > DIM your_movie AS String > your_movie = "/your_video.mpg" > > PRINT Textbox2.Text, your_movie > > the above outputs > /home /your_video.mpg > > I need it to print > /home/your_video.mpg PRINT Textbox2.Text; your_movie or PRINT Textbox2.Text & your_movie Gambas has an online help. In Gambas2 is under ?-->Help browser. I don't remember Gambas1 Ciao. > > On another note: > Im after some documentation on how to create new lines, carriage returns, > spaces in strings and also in Print > > email me piresl at ...626... > > Thanks for reading > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user From rterry at ...1822... Sun Dec 23 22:03:54 2007 From: rterry at ...1822... (richard terry) Date: Mon, 24 Dec 2007 08:03:54 +1100 Subject: [Gambas-user] Setting grid size in the form editor Message-ID: <200712240803.54909.rterry@...1822...> Hi, Is it possible to change the default grid size in the editor. Currently it means I cannot get some controls as close together as I'd like, without switching if off completely. Thanks. Richard From piresl at ...626... Mon Dec 24 15:34:51 2007 From: piresl at ...626... (lawrence pires) Date: Mon, 24 Dec 2007 14:34:51 +0000 Subject: [Gambas-user] Progress Bar and event? Message-ID: <37c460f60712240634l33d3b94o3e79225974033f99@...627...> Still pretty new to Gambas, but have been playing with the progress bar, but the damm thing only works when triggered by an event. Heres what i got: PUBLIC SUB ProgressBar1_GotFocus() DIM i AS Integer ProgressBar1.Visible = TRUE WAIT FOR i = 1 TO 246 ProgressBar1.Value += 0.004 ProgressBar1.Refresh NEXT ProgressBar1.Visible = FALSE END So basically it only works when the mouse is over the progress bar or when i left click. How can I have it working automatically without an event? can someone give me an example? cheers From piresl at ...626... Mon Dec 24 15:47:53 2007 From: piresl at ...626... (lawrence pires) Date: Mon, 24 Dec 2007 14:47:53 +0000 Subject: [Gambas-user] progress bar and shell command which takes ages Message-ID: <37c460f60712240647h7a06c945ye616dbe87cd71d0c@...627...> i would like to integrate a progress bar but not 100% sure how to do this, I am using EXEC command to convert a music file from WAA to MP3 this process can take 3-4 minutes, and i would some how like to use the progress bar to show the progress of the conversion. (is it possible?) Am I right in saying the the progress bar will only work with a loop? & how would i do the loop with the EXEC command? thanks for reading From dcamposf at ...626... Mon Dec 24 17:59:28 2007 From: dcamposf at ...626... (Daniel Campos) Date: Mon, 24 Dec 2007 17:59:28 +0100 Subject: [Gambas-user] Progress Bar and event? In-Reply-To: <37c460f60712240634l33d3b94o3e79225974033f99@...627...> References: <37c460f60712240634l33d3b94o3e79225974033f99@...627...> Message-ID: <7259b5ae0712240859x33989fe8j2b3e44b3c45ea741@...627...> FOR i = 1 TO 246 ProgressBar1.Value += 0.004 ' HERE WAIT NEXT You need WAIT inside the loop to refresh the interface, may be you should add a delay, it could be too fast to watch it in that example, for example WAIT 0.01 Daniel 2007/12/24, lawrence pires : > Still pretty new to Gambas, but have been playing with the progress bar, but > the damm thing only works when triggered by an event. > > Heres what i got: > > PUBLIC SUB ProgressBar1_GotFocus() > DIM i AS Integer > > ProgressBar1.Visible = TRUE > WAIT > FOR i = 1 TO 246 > ProgressBar1.Value += 0.004 > ProgressBar1.Refresh > NEXT > ProgressBar1.Visible = FALSE > > END > > So basically it only works when the mouse is over the progress bar or when i > left click. > > How can I have it working automatically without an event? can someone give > me an example? > > cheers > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > From dcamposf at ...626... Mon Dec 24 18:03:29 2007 From: dcamposf at ...626... (Daniel Campos) Date: Mon, 24 Dec 2007 18:03:29 +0100 Subject: [Gambas-user] progress bar and shell command which takes ages In-Reply-To: <37c460f60712240647h7a06c945ye616dbe87cd71d0c@...627...> References: <37c460f60712240647h7a06c945ye616dbe87cd71d0c@...627...> Message-ID: <7259b5ae0712240903x51916f0ah6c3dca276e8dd5f8@...627...> May you could do it without loops, use EXEC FOR INPUT or FOR READ, and read the progress from the application (I assume the console application pushes a text progress bar or a percentage indicator during the process), then refresh the ProgressBar anytime you find a Process_Read() event, something like PUBLIC hProc AS Process PUBLIC SUB hProc_Read() Dim Buf as String READ #hProc,Buf,Lof(hProc) ' Parse the buffer here ProgressBar1.Value=whatever END PUBLIC SUB StartTheProcess() hProc=Exec[Application,param1,param2...] FOR INPUT Object.Attach(hProc,Me,"hProc") END 2007/12/24, lawrence pires : > i would like to integrate a progress bar but not 100% sure how to do this, > > I am using EXEC command to convert a music file from WAA to MP3 this process > can take 3-4 minutes, and i would some how like to use the progress bar to > show the progress of the conversion. (is it possible?) > > Am I right in saying the the progress bar will only work with a loop? & how > would i do the loop with the EXEC command? > > thanks for reading > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > From piresl at ...626... Tue Dec 25 12:32:15 2007 From: piresl at ...626... (lawrence pires) Date: Tue, 25 Dec 2007 11:32:15 +0000 Subject: [Gambas-user] Write to file is adding strange characters Message-ID: <37c460f60712250332y8f55379oa93841a8945dd949@...627...> Im trying to automate the writing of a dvd.xml file. Im trying to create and write the following text into a file: Heres the code im using: PUBLIC SUB Button2_Click() DIM hFile AS File DIM test AS String DIM test1 AS String DIM test3 AS String test = " \n \n\n\n\n" test1 = "" test3 = "\n\n\n\n" hFile = OPEN "/home/don/Desktop/dvd" FOR CREATE WRITE #hFile, test WRITE #hFile, test1 WRITE #hFile, test3 FLUSH #hFile CLOSE #hFile END And this is the contents after the above has been executed: 1 @* As you can see is writing strange characters to the dvd.xml file. can anyone please help me? Kind regards & Happy Christmas From dcamposf at ...626... Tue Dec 25 14:32:45 2007 From: dcamposf at ...626... (Daniel Campos) Date: Tue, 25 Dec 2007 14:32:45 +0100 Subject: [Gambas-user] Write to file is adding strange characters In-Reply-To: <37c460f60712250332y8f55379oa93841a8945dd949@...627...> References: <37c460f60712250332y8f55379oa93841a8945dd949@...627...> Message-ID: <7259b5ae0712250532w3abdc131rc8177a2404279c24@...627...> WRITE #hFile, test,Len(test) or PRINT #hFile,test A file buffer does not need to be flushed prior to close it. Daniel 2007/12/25, lawrence pires : > Im trying to automate the writing of a dvd.xml file. > > Im trying to create and write the following text into a file: > > > > > > > Heres the code im using: > > PUBLIC SUB Button2_Click() > DIM hFile AS File > DIM test AS String > DIM test1 AS String > DIM test3 AS String > > test = " \n \n\n\n\n" > test1 = " "chapters=\"0,0:20,0:30,0:40,0:50,0:60\"" "/>" > test3 = "\n\n\n\n" > > hFile = OPEN "/home/don/Desktop/dvd" FOR CREATE > > WRITE #hFile, test > WRITE #hFile, test1 > WRITE #hFile, test3 > FLUSH #hFile > CLOSE #hFile > END > > And this is the contents after the above has been executed: > > 1 > > > > > @* > > > > > > > As you can see is writing strange characters to the dvd.xml file. > > > can anyone please help me? > > Kind regards & Happy Christmas > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > From gambas at ...1... Wed Dec 26 20:31:11 2007 From: gambas at ...1... (Benoit Minisini) Date: Wed, 26 Dec 2007 20:31:11 +0100 Subject: [Gambas-user] Format$ thousand separator In-Reply-To: <476E6DA8.5020307@...626...> References: <4768ED7E.1090605@...626...> <200712201322.16949.gambas@...1...> <476E6DA8.5020307@...626...> Message-ID: <200712262031.11431.gambas@...1...> On dimanche 23 d?cembre 2007, Ep?leg wrote: > En/na Benoit Minisini ha escrit: > > On jeudi 20 d?cembre 2007, Ep?leg wrote: > >> En/na Benoit Minisini ha escrit: > >>> On mercredi 19 d?cembre 2007, Ep?leg wrote: > >>>> En/na Benoit Minisini ha escrit: > >>>>> On mercredi 19 d?cembre 2007, Benoit Minisini wrote: > >>>>>> On mercredi 19 d?cembre 2007, Ep?leg wrote: > >>>>>>> Hello, > >>>>>>> > >>>>>>> I do not get the thousand separator whit the ?format$? function, > >>>>>>> some examples: > >>>>>>> > >>>>>>> > >>>>>>> PRINT Format$(1000000, "$$,#.00") => EUR 1 000 000,00 > >>>>>>> > >>>>>>> PRINT Format$(1000000, "$,#.00") => ? 1 000 000,00 > >>>>>>> > >>>>>>> PRINT Format$(1000000, ",#.00") => 1000000,00 > >>>>>>> > >>>>>>> > >>>>>>> What I'm doing wrong? > >>>>>>> > >>>>>>> These tests are done in a Ubuntu Gutsy (7.10) with ?ca_ES.UTF-8? > >>>>>>> locale > >>>>>>> > >>>>>>> Regards, > >>>>>>> Ep?leg. > >>>>>> > >>>>>> Apparently, this is a bug! > >>>>> > >>>>> The last revision now takes thousand separators into account. > >>>>> > >>>>> But be careful that in the GNU locales, many languages have thousand > >>>>> separators only for currencies. > >>>>> > >>>>> So, when a locale does not have any thousands separator, a space is > >>>>> used, and the value is splitted each three digits. Maybe this is a > >>>>> bad idea that will be removed in the future! > >>>>> > >>>>> Regards, > >>>> > >>>> Thanks! > >>>> > >>>> In an Ubuntu 7.10 with locale en_US.UTF-8 and en_GB.UTF-8, the > >>>> thousand separator works fine also with numbers, but with locale > >>>> ca_ES.UTF-8 and es_ES.UTF-8 do not works with numbers (spaces added). > >>>> In both cases the currencies thousand separator works fine. > >>>> > >>>> Excuse my ignorance but in an Open Office Spread document, format > >>>> function works correctly with numbers and currencies in all of above > >>>> locale and I don't know why. > >>>> > >>>> Thanks a lot, > >>>> Ep?leg. > >>> > >>> The locale information is stored in /usr/share/locale/XXX where XXX is > >>> the contents of the LC_* environment variable. > >>> > >>> Gambas uses this information through the standard Unix API. If I set my > >>> environment to es_ES, then I have no standard thousands separator, and > >>> a point for currency thousands separator. > >>> > >>> Maybe Open Office does not use this information. Maybe it uses it, but > >>> patches it as Gambas does. > >>> > >>> For example, KDE uses its own locale information, in > >>> the /usr/share/locale/l10n/xxx/entry.desktop file. > >>> > >>> Regards, > >> > >> Thank You for Your answer. > >> > >> From My absolutely ignorance and understanding that this is a locale > >> problem, isn't a solution to use the currency thousand separator in > >> numbers when this info is missing? > >> > >> Regards, > >> Ep?leg. > > > > Yes, but if the locale tells that there is no separators with > > non-currency numbers, maybe it is right? I must know if it is a bug or > > not to take a decision! > > In my system, Ubuntu 7.10, I got this: > > $ LANG=ca_ES.UTF-8 locale -k LC_NUMERIC > decimal_point="," > thousands_sep="" > grouping=-1;-1 > numeric-decimal-point-wc=44 > numeric-thousands-sep-wc=0 > numeric-codeset="UTF-8" > > $ LANG=es_ES.UTF-8 locale -k LC_NUMERIC > decimal_point="," > thousands_sep="" > grouping=-1;-1 > numeric-decimal-point-wc=44 > numeric-thousands-sep-wc=0 > numeric-codeset="UTF-8" > > $ LANG=es_AR.UTF-8 locale -k LC_NUMERIC > decimal_point="," > thousands_sep="." > grouping=3;3 > numeric-decimal-point-wc=44 > numeric-thousands-sep-wc=46 > numeric-codeset="UTF-8" > > $ LANG=en_US.UTF-8 locale -k LC_NUMERIC > decimal_point="." > thousands_sep="," > grouping=3;3 > numeric-decimal-point-wc=46 > numeric-thousands-sep-wc=44 > numeric-codeset="UTF-8" > > $ LANG=fr_FR.UTF-8 locale -k LC_NUMERIC > decimal_point="," > thousands_sep=" " > grouping=3;3 > numeric-decimal-point-wc=44 > numeric-thousands-sep-wc=32 > numeric-codeset="UTF-8" > > $ LANG=de_DE.UTF-8 locale -k LC_NUMERIC > decimal_point="," > thousands_sep="." > grouping=3;3 > numeric-decimal-point-wc=44 > numeric-thousands-sep-wc=46 > numeric-codeset="UTF-8" > > Gambas2 do as locale informs so isn't a Gambas2 bug. > > For me is clear that this is a bug in the data of Catalan and Spanish > locale. There are 3 fields with wrong thousands data. > > Do You know the way to solve this bug? > > Regards, > Ep?leg. > No idea. Maybe we should look at the GNU libc web site. They should have a bugzilla. Regards, -- Benoit Minisini From gambas at ...1... Wed Dec 26 20:32:28 2007 From: gambas at ...1... (Benoit Minisini) Date: Wed, 26 Dec 2007 20:32:28 +0100 Subject: [Gambas-user] Write to file is adding strange characters In-Reply-To: <37c460f60712250332y8f55379oa93841a8945dd949@...627...> References: <37c460f60712250332y8f55379oa93841a8945dd949@...627...> Message-ID: <200712262032.28849.gambas@...1...> On mardi 25 d?cembre 2007, lawrence pires wrote: > Im trying to automate the writing of a dvd.xml file. > > Im trying to create and write the following text into a file: > > > > > > > Heres the code im using: > > PUBLIC SUB Button2_Click() > DIM hFile AS File > DIM test AS String > DIM test1 AS String > DIM test3 AS String > > test = " \n \n\n\n\n" > test1 = " "chapters=\"0,0:20,0:30,0:40,0:50,0:60\"" "/>" > test3 = "\n\n\n\n" > > hFile = OPEN "/home/don/Desktop/dvd" FOR CREATE > > WRITE #hFile, test > WRITE #hFile, test1 > WRITE #hFile, test3 > FLUSH #hFile > CLOSE #hFile > END > > And this is the contents after the above has been executed: > > 1 > > > > > @* > > > > > > > As you can see is writing strange characters to the dvd.xml file. > > > can anyone please help me? > > Kind regards & Happy Christmas WRITE is for writing binary data. Use PRINT to write text data. Regards, -- Benoit Minisini From nando_f at ...951... Wed Dec 26 21:42:26 2007 From: nando_f at ...951... (nando) Date: Wed, 26 Dec 2007 15:42:26 -0500 Subject: [Gambas-user] Write to file is adding strange characters In-Reply-To: <200712262032.28849.gambas@...1...> References: <37c460f60712250332y8f55379oa93841a8945dd949@...627...> <200712262032.28849.gambas@...1...> Message-ID: <20071226203717.M31162@...951...> When you use the WRITE statement, there are two ways to use it: 1) WRITE #hFile, test 2) WRITE #hFile, test, LEN(test) Explanation... 1) Gambas adds the length of the string as part of the written data. This one will cause you problems because it adds lenght automatically. 2) Gambas adds nothing and writes only the quantity of bytes specified by LEN(test) WITHOUT adding anything else to the file. Use 2) by adding ,LEN(string var) and the file will be as you expect. -Fernando ---------- Original Message ----------- From: Benoit Minisini To: mailing list for gambas users Sent: Wed, 26 Dec 2007 20:32:28 +0100 Subject: Re: [Gambas-user] Write to file is adding strange characters > On mardi 25 d?cembre 2007, lawrence pires wrote: > > Im trying to automate the writing of a dvd.xml file. > > > > Im trying to create and write the following text into a file: > > > > > > > > > > > > > > Heres the code im using: > > > > PUBLIC SUB Button2_Click() > > DIM hFile AS File > > DIM test AS String > > DIM test1 AS String > > DIM test3 AS String > > > > test = " \n \n\n\n\n" > > test1 = " > "chapters=\"0,0:20,0:30,0:40,0:50,0:60\"" "/>" > > test3 = "\n\n\n\n" > > > > hFile = OPEN "/home/don/Desktop/dvd" FOR CREATE > > > > WRITE #hFile, test > > WRITE #hFile, test1 > > WRITE #hFile, test3 > > FLUSH #hFile > > CLOSE #hFile > > END > > > > And this is the contents after the above has been executed: > > > > 1 > > > > > > > > > > @* > > > > > > > > > > > > > > As you can see is writing strange characters to the dvd.xml file. > > > > > > can anyone please help me? > > > > Kind regards & Happy Christmas > > WRITE is for writing binary data. Use PRINT to write text data. > > Regards, > > -- > Benoit Minisini > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user ------- End of Original Message ------- From nando_f at ...951... Wed Dec 26 21:50:48 2007 From: nando_f at ...951... (nando) Date: Wed, 26 Dec 2007 15:50:48 -0500 Subject: [Gambas-user] Print variables without spaces? In-Reply-To: <200712232155.27640.rospolosco@...152...> References: <37c460f60712231202s66c906daw98da3d3bcb08df2c@...627...> <200712232155.27640.rospolosco@...152...> Message-ID: <20071226204529.M41796@...951...> Double check the length of each string Print LEN(your_movie) Print LEN(TextBox2.Text) and see if they are as expected. You could use trim$ also. Users have a habit of typing in spaces in text boxes. I've seen leading and trailing spaces cause problems over the years. Expect dirty data from humans. DIM a AS String a=chr$(13) ...then use 'a' as you need for the CR -Fernando ---------- Original Message ----------- From: Stefano Palmeri To: mailing list for gambas users Sent: Sun, 23 Dec 2007 21:55:27 +0100 Subject: Re: [Gambas-user] Print variables without spaces? > Alle 21:02, domenica 23 dicembre 2007, lawrence pires ha scritto: > > Only found Gambas over the weekend and have been hooked. > > But im stuck and m wondering if any of you will help me, > > > > I have 2 variables and im trying to print both without a space in between?. > > > > Heres my problem. > > > > DIM your_movie AS String > > your_movie = "/your_video.mpg" > > > > PRINT Textbox2.Text, your_movie > > > > the above outputs > > /home /your_video.mpg > > > > I need it to print > > /home/your_video.mpg > > PRINT Textbox2.Text; your_movie > > or > > PRINT Textbox2.Text & your_movie > > Gambas has an online help. In Gambas2 is under ?-->Help browser. > I don't remember Gambas1 > > Ciao. > > > > > On another note: > > Im after some documentation on how to create new lines, carriage returns, > > spaces in strings and also in Print > > > > email me piresl at ...626... > > > > Thanks for reading > > ------------------------------------------------------------------------- > > This SF.net email is sponsored by: Microsoft > > Defy all challenges. Microsoft(R) Visual Studio 2005. > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > > _______________________________________________ > > Gambas-user mailing list > > Gambas-user at lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/gambas-user > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user ------- End of Original Message ------- From piresl at ...626... Wed Dec 26 22:09:46 2007 From: piresl at ...626... (lozza1978) Date: Wed, 26 Dec 2007 13:09:46 -0800 (PST) Subject: [Gambas-user] Write to file is adding strange characters In-Reply-To: <20071226203717.M31162@...951...> References: <37c460f60712250332y8f55379oa93841a8945dd949@...627...> <200712262032.28849.gambas@...1...> <20071226203717.M31162@...951...> Message-ID: <14506463.post@...1379...> I would like to thank you all for the explanations it has cleared up why i was adding the length of the string to the Write command. in future i will be using print instead of Write as write is for binary. Anyway, Here is a pic of my DVD converter / recorder Project..(Still early days) At the moment it converts avi/mpg files ready for dvd then works out movie length and creates chapters, creates TOC and then you can burn the movie.. its a quick and easy way to create DVD'S (Any Comments?) http://www.nabble.com/file/p14506463/snapshot8.png nando-7 wrote: > > When you use the WRITE statement, there are two ways to use it: > 1) WRITE #hFile, test > 2) WRITE #hFile, test, LEN(test) > > Explanation... > > 1) Gambas adds the length of the string as part of the written data. > This one will cause you problems because it adds lenght automatically. > 2) Gambas adds nothing and writes only the quantity of bytes > specified by LEN(test) WITHOUT adding anything else to the file. > > Use 2) by adding ,LEN(string var) and the file will be as you expect. > > -Fernando > > > ---------- Original Message ----------- > From: Benoit Minisini > To: mailing list for gambas users > Sent: Wed, 26 Dec 2007 20:32:28 +0100 > Subject: Re: [Gambas-user] Write to file is adding strange characters > >> On mardi 25 d?cembre 2007, lawrence pires wrote: >> > Im trying to automate the writing of a dvd.xml file. >> > >> > Im trying to create and write the following text into a file: >> > >> > >> > >> > >> > >> > >> > Heres the code im using: >> > >> > PUBLIC SUB Button2_Click() >> > DIM hFile AS File >> > DIM test AS String >> > DIM test1 AS String >> > DIM test3 AS String >> > >> > test = " \n \n\n\n\n" >> > test1 = "> > "chapters=\"0,0:20,0:30,0:40,0:50,0:60\"" "/>" >> > test3 = "\n\n\n\n" >> > >> > hFile = OPEN "/home/don/Desktop/dvd" FOR CREATE >> > >> > WRITE #hFile, test >> > WRITE #hFile, test1 >> > WRITE #hFile, test3 >> > FLUSH #hFile >> > CLOSE #hFile >> > END >> > >> > And this is the contents after the above has been executed: >> > >> > 1 >> > >> > >> > >> > >> > @* >> > >> > >> > >> > >> > >> > >> > As you can see is writing strange characters to the dvd.xml file. >> > >> > >> > can anyone please help me? >> > >> > Kind regards & Happy Christmas >> >> WRITE is for writing binary data. Use PRINT to write text data. >> >> Regards, >> >> -- >> Benoit Minisini >> >> ------------------------------------------------------------------------- >> This SF.net email is sponsored by: Microsoft >> Defy all challenges. Microsoft(R) Visual Studio 2005. >> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ >> _______________________________________________ >> Gambas-user mailing list >> Gambas-user at lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/gambas-user > ------- End of Original Message ------- > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > -- View this message in context: http://www.nabble.com/Write-to-file-is-adding-strange-characters-tp14494615p14506463.html Sent from the gambas-user mailing list archive at Nabble.com. From piresl at ...626... Wed Dec 26 23:29:43 2007 From: piresl at ...626... (lawrence pires) Date: Wed, 26 Dec 2007 22:29:43 +0000 Subject: [Gambas-user] Whats a process? & can you show me an example? Message-ID: <37c460f60712261429h691727ebxe80eb8f162d019ed@...627...> I dont understand Dim Pfile AS Process I have seen this in the movie player example in gambas but cant work out with it actually does? I have the gambas-beginner-guide.pdf but it doesn't mention anything about process in the TOC, Could someone post an easy to follow example of how a process works compared to a string or file for example? Has this got anything to do with the program looking as though its crashed when minimizing & maximizing the window while running memory intensive exec commands? Once again thanks for reading. From rohnny at ...1248... Thu Dec 27 10:12:24 2007 From: rohnny at ...1248... (R. Stormo) Date: Thu, 27 Dec 2007 01:12:24 -0800 (PST) Subject: [Gambas-user] Database problem. Message-ID: <14511016.post@...1379...> I'm running SQLite3 and trying to create a view from a table. First time it says no records (should be) Second time I run give me an error. This is what I'm doing. Open my database in the database manager , double click on my table, all is ok upto now. Select SQL insert this create view test1 as select kontakt from faktura where kontakt='some name that exist'; return "no records" Seconds time I try it give me "Cannot exec request Query failed: SQL error or missing database" First time it should give me records. Why does it not show views if they are created? Regards Rohnny My Gambas Community http://gambasforum.tk -- View this message in context: http://www.nabble.com/Database-problem.-tp14511016p14511016.html Sent from the gambas-user mailing list archive at Nabble.com. From gambas.fr at ...626... Thu Dec 27 11:25:55 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Thu, 27 Dec 2007 11:25:55 +0100 Subject: [Gambas-user] Resizing In-Reply-To: <200712201542.28138.rterry@...1822...> References: <200712201542.28138.rterry@...1822...> Message-ID: <6324a42a0712270225h65047d22s3504be9d3a85418f@...627...> on road... i've this and i will give you a good exemple i've done this afternoon (in france). 2007/12/20, richard terry : > > Hi, > > New to the list/gambas, last programmed in VB back in VB5 days, none > since. > > Thought I'd play with Gambas over the Xmas break. > > Question. > > Any quick guide to automatically re-sizing all child controls of > form/panel eg > tutorial, code examples etc. I've tried some of the properties and so far > havn't conceptually mastered what should be simple. then you will... Thanks. > > Richard > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services > for just about anything Open Source. > > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > Gambas widgets are a set of objects that can tell some wishe to there parents : - i Want to take all place i can...(Expand=TRUE) - i Want to be free to be pleced where i want (Ignore=TRUE) - I want to have a little bit place between me and the parent border (Padding = n pixels) Gambas Containers ares a set of objects that inherit Widget and that arrange theire child in function of theire zorder, theire which, and a defined orientation or mode. the mode is defined by the arrangement mode. ( container.arrangement=arrange.vertical) there is 5 mode of arrangement: - None : do nothing - Vertical : arrange the children by giving them the container width(-padding) and maintain their height, and by putting them ones at bottom of others (reach the zorder) - horizontal : arrange the children by giving them the parent height and maintain their width, and by putting them ones at right of others (reaching the zorder) - row : same as horizontal but objects can't be expanded and when the line is full then objects are pushed to the bottom (like a toolbar) - column : same as row for vertical. the container have 2 property : -padding : set the space between the container border and its children - spacing: set the space between its children There is nothing new ... it really look like html table sizing... with gambas there is many time i've not used the _Resize event. This is maybe the more bad english text i've done (maybe not), i'm french... please scuse me ! Fabien Bodard From rterry at ...1822... Fri Dec 28 03:03:48 2007 From: rterry at ...1822... (richard terry) Date: Fri, 28 Dec 2007 13:03:48 +1100 Subject: [Gambas-user] Resizing In-Reply-To: <6324a42a0712270225h65047d22s3504be9d3a85418f@...627...> References: <200712201542.28138.rterry@...1822...> <6324a42a0712270225h65047d22s3504be9d3a85418f@...627...> Message-ID: <200712281303.48633.rterry@...1822...> On Thu, 27 Dec 2007 09:25:55 pm Fabien Bodard wrote: Thanks for taking the time and effort I found your explanation quite clear. I've done a bit of mucking around with it and am getting the hang of it. Your english BTW is 1000% better than my french!!!! I've another question which i will post with a separate header. Regards Richard > on road... i've this and i will give you a good exemple i've done this > afternoon > > (in france). > > 2007/12/20, richard terry : > > Hi, > > > > New to the list/gambas, last programmed in VB back in VB5 days, none > > since. > > > > Thought I'd play with Gambas over the Xmas break. > > > > Question. > > > > Any quick guide to automatically re-sizing all child controls of > > form/panel eg > > tutorial, code examples etc. I've tried some of the properties and so far > > havn't conceptually mastered what should be simple. > > then you will... > > > Thanks. > > > Richard > > > > ------------------------------------------------------------------------- > > SF.Net email is sponsored by: > > Check out the new SourceForge.net Marketplace. > > It's the best place to buy or sell services > > for just about anything Open Source. > > > > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketpl > >ace _______________________________________________ > > Gambas-user mailing list > > Gambas-user at lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/gambas-user > > Gambas widgets are a set of objects that can tell some wishe to there > parents : > - i Want to take all place i can...(Expand=TRUE) > - i Want to be free to be pleced where i want (Ignore=TRUE) > - I want to have a little bit place between me and the parent border > (Padding = n pixels) > > Gambas Containers ares a set of objects that inherit Widget and that > arrange theire child in function of theire zorder, theire which, and a > defined orientation or mode. > > the mode is defined by the arrangement mode. ( > container.arrangement=arrange.vertical) > > there is 5 mode of arrangement: > - None : do nothing > - Vertical : arrange the children by giving them the container > width(-padding) and maintain their height, and by putting them ones at > bottom of others (reach the zorder) > - horizontal : arrange the children by giving them the parent height and > maintain their width, and by putting them ones at right of others (reaching > the zorder) > > - row : same as horizontal but objects can't be expanded and when the > line is full then objects are pushed to the bottom (like a toolbar) > > - column : same as row for vertical. > > > the container have 2 property : > -padding : set the space between the container border and its children > > - spacing: set the space between its children > > > There is nothing new ... it really look like html table sizing... with > gambas there is many time i've not used the _Resize event. > > This is maybe the more bad english text i've done (maybe not), i'm > french... please scuse me ! > > Fabien Bodard > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user From rterry at ...1822... Fri Dec 28 03:35:15 2007 From: rterry at ...1822... (richard terry) Date: Fri, 28 Dec 2007 13:35:15 +1100 Subject: [Gambas-user] Implementing a widget stack Message-ID: <200712281335.16005.rterry@...1822...> Once again, new to gambas so expect some stupid questions. I wish to link a toolbar to a a widget stack (ie like a deck of cards, each card being say a panel with its own content of controls/widgets) where clicking the icon shows its corresponding panel and hides the rest. I succeeded to a degree using a form with a vertical box containing toolbar on top and the panel's underneath, and linking the swapping to the click event of each button. However what I really want to do is have the main form design contain splitters, and this widget stack live on one side of the splitter. What I've found is that when I hide/show the panels in this situation, that the sizing bar of the splitter re-sets itself to the extreme side of the screen. If anyone does understand what I'm talking about,has tried it, or has code, I'd appreciate some pointers. Thanks in anticipation. Richard From gambas at ...1... Sat Dec 29 09:43:30 2007 From: gambas at ...1... (Benoit Minisini) Date: Sat, 29 Dec 2007 09:43:30 +0100 Subject: [Gambas-user] Database problem. In-Reply-To: <14511016.post@...1379...> References: <14511016.post@...1379...> Message-ID: <200712290943.30362.gambas@...1...> On jeudi 27 d?cembre 2007, R. Stormo wrote: > I'm running SQLite3 and trying to create a view from a table. > First time it says no records (should be) Second time I run give me an > error. > This is what I'm doing. > Open my database in the database manager , double click on my table, all is > ok upto now. > Select SQL > insert this > create view test1 as select kontakt from faktura where kontakt='some name > that exist'; > return "no records" > Seconds time I try it give me > "Cannot exec request > Query failed: SQL error or missing database" > > First time it should give me records. Why does it not show views if they > are created? > > Regards Rohnny > > > My Gambas Community http://gambasforum.tk Can you tell what requests you wrote exactly? -- Benoit Minisini From rohnny at ...1248... Sat Dec 29 10:35:52 2007 From: rohnny at ...1248... (R. Stormo) Date: Sat, 29 Dec 2007 01:35:52 -0800 (PST) Subject: [Gambas-user] Database problem. In-Reply-To: <200712290943.30362.gambas@...1...> References: <14511016.post@...1379...> <200712290943.30362.gambas@...1...> Message-ID: <14536101.post@...1379...> Benoit Minisini wrote: > > On jeudi 27 d?cembre 2007, R. Stormo wrote: >> I'm running SQLite3 and trying to create a view from a table. >> First time it says no records (should be) Second time I run give me an >> error. >> This is what I'm doing. >> Open my database in the database manager , double click on my table, all >> is >> ok upto now. >> Select SQL >> insert this >> create view test1 as select kontakt from faktura where kontakt='some name >> that exist'; >> return "no records" >> Seconds time I try it give me >> "Cannot exec request >> Query failed: SQL error or missing database" >> >> First time it should give me records. Why does it not show views if they >> are created? >> >> Regards Rohnny >> >> >> My Gambas Community http://gambasforum.tk > > Can you tell what requests you wrote exactly? > > -- > Benoit Minisini > > > All described in previous message. create view test1 as select field_in_database from database_name where field_in_database='some name that exist'; return "no records" Seconds time I try it give me "Cannot exec request Query failed: SQL error or missing database" First time when it returned no records. It should have return records. The view did not show up as a table that would be nice if it did. Regards Rohnny My Gambas Community http://gambasforum.tk -- View this message in context: http://www.nabble.com/Database-problem.-tp14511016p14536101.html Sent from the gambas-user mailing list archive at Nabble.com. From gambas at ...1... Sat Dec 29 10:42:54 2007 From: gambas at ...1... (Benoit Minisini) Date: Sat, 29 Dec 2007 10:42:54 +0100 Subject: [Gambas-user] Database problem. In-Reply-To: <14536101.post@...1379...> References: <14511016.post@...1379...> <200712290943.30362.gambas@...1...> <14536101.post@...1379...> Message-ID: <200712291042.54252.gambas@...1...> On samedi 29 d?cembre 2007, R. Stormo wrote: > Benoit Minisini wrote: > > On jeudi 27 d?cembre 2007, R. Stormo wrote: > >> I'm running SQLite3 and trying to create a view from a table. > >> First time it says no records (should be) Second time I run give me an > >> error. > >> This is what I'm doing. > >> Open my database in the database manager , double click on my table, all > >> is > >> ok upto now. > >> Select SQL > >> insert this > >> create view test1 as select kontakt from faktura where kontakt='some > >> name that exist'; > >> return "no records" > >> Seconds time I try it give me > >> "Cannot exec request > >> Query failed: SQL error or missing database" > >> > >> First time it should give me records. Why does it not show views if they > >> are created? > >> > >> Regards Rohnny > >> > >> > >> My Gambas Community http://gambasforum.tk > > > > Can you tell what requests you wrote exactly? > > > > -- > > Benoit Minisini > > All described in previous message. > > create view test1 as select field_in_database from database_name where > field_in_database='some name that exist'; > > > return "no records" > Seconds time I try it give me > "Cannot exec request > Query failed: SQL error or missing database" > > First time when it returned no records. It should have return records. The > view did not show up as a table that would be nice if it did. > > > Regards Rohnny > > My Gambas Community http://gambasforum.tk If you create twice the same view, it is logical that you get an error the second time, isn't it? -- Benoit Minisini From fredrik_hansson at ...1788... Sat Dec 29 10:44:51 2007 From: fredrik_hansson at ...1788... (Fredrik Hansson) Date: Sat, 29 Dec 2007 10:44:51 +0100 Subject: [Gambas-user] Gambas on 64bit? Message-ID: <1198921491.6025.7.camel@...1789...> I know that Gambas requires 32 bit Linux. In fact, Gambas is the only reason that I still run 32 bit Linux, having a 64 bit computer since 3 years... But some programs (like Open Office) are acually run in a 32 bit environment even though you have installed for example Ubuntu 64. Is something like that possible for Gambas? - Would it be possible to run Gambas applications (the .gambas and the runtime) on a 64 bit system? (If not, what do we do when people change to 64 bit - the hardware is already there?) - Would it be possible to develop Gambas applications on a 64 bit system with a 32 bit environment just like I mentioned above? Regards Fredrik From rohnny at ...1248... Sat Dec 29 10:54:17 2007 From: rohnny at ...1248... (R. Stormo) Date: Sat, 29 Dec 2007 01:54:17 -0800 (PST) Subject: [Gambas-user] Database problem. In-Reply-To: <200712291042.54252.gambas@...1...> References: <14511016.post@...1379...> <200712290943.30362.gambas@...1...> <14536101.post@...1379...> <200712291042.54252.gambas@...1...> Message-ID: <14536217.post@...1379...> Benoit Minisini wrote: > > On samedi 29 d?cembre 2007, R. Stormo wrote: >> Benoit Minisini wrote: >> > On jeudi 27 d?cembre 2007, R. Stormo wrote: >> >> I'm running SQLite3 and trying to create a view from a table. >> >> First time it says no records (should be) Second time I run give me an >> >> error. >> >> This is what I'm doing. >> >> Open my database in the database manager , double click on my table, >> all >> >> is >> >> ok upto now. >> >> Select SQL >> >> insert this >> >> create view test1 as select kontakt from faktura where kontakt='some >> >> name that exist'; >> >> return "no records" >> >> Seconds time I try it give me >> >> "Cannot exec request >> >> Query failed: SQL error or missing database" >> >> >> >> First time it should give me records. Why does it not show views if >> they >> >> are created? >> >> >> >> Regards Rohnny >> >> >> >> >> >> My Gambas Community http://gambasforum.tk >> > >> > Can you tell what requests you wrote exactly? >> > >> > -- >> > Benoit Minisini >> >> All described in previous message. >> >> create view test1 as select field_in_database from database_name where >> field_in_database='some name that exist'; >> >> >> return "no records" >> Seconds time I try it give me >> "Cannot exec request >> Query failed: SQL error or missing database" >> >> First time when it returned no records. It should have return records. >> The >> view did not show up as a table that would be nice if it did. >> >> >> Regards Rohnny >> >> My Gambas Community http://gambasforum.tk > > If you create twice the same view, it is logical that you get an error the > second time, isn't it? > > -- > Benoit Minisini > > I suppose it is ;) but why does the view not show up as a table, this way you can see if it's there. Strange that it does not show any records either. This is from a live table got from a demo project create view test1 as select bfield from table1 where bfield='giraffe'; Gives "NO RECORDS" select bfield from table1 where bfield='giraffe'; This give me 10 records. There must be something wrong someplace. Regards Rohnny My Gambas Community http://gambasforum.tk -- View this message in context: http://www.nabble.com/Database-problem.-tp14511016p14536217.html Sent from the gambas-user mailing list archive at Nabble.com. From gambas at ...1... Sat Dec 29 10:57:22 2007 From: gambas at ...1... (Benoit Minisini) Date: Sat, 29 Dec 2007 10:57:22 +0100 Subject: [Gambas-user] Database problem. In-Reply-To: <14536217.post@...1379...> References: <14511016.post@...1379...> <200712291042.54252.gambas@...1...> <14536217.post@...1379...> Message-ID: <200712291057.22972.gambas@...1...> On samedi 29 d?cembre 2007, R. Stormo wrote: > Benoit Minisini wrote: > > On samedi 29 d?cembre 2007, R. Stormo wrote: > >> Benoit Minisini wrote: > >> > On jeudi 27 d?cembre 2007, R. Stormo wrote: > >> >> I'm running SQLite3 and trying to create a view from a table. > >> >> First time it says no records (should be) Second time I run give me > >> >> an error. > >> >> This is what I'm doing. > >> >> Open my database in the database manager , double click on my table, > >> > >> all > >> > >> >> is > >> >> ok upto now. > >> >> Select SQL > >> >> insert this > >> >> create view test1 as select kontakt from faktura where kontakt='some > >> >> name that exist'; > >> >> return "no records" > >> >> Seconds time I try it give me > >> >> "Cannot exec request > >> >> Query failed: SQL error or missing database" > >> >> > >> >> First time it should give me records. Why does it not show views if > >> > >> they > >> > >> >> are created? > >> >> > >> >> Regards Rohnny > >> >> > >> >> > >> >> My Gambas Community http://gambasforum.tk > >> > > >> > Can you tell what requests you wrote exactly? > >> > > >> > -- > >> > Benoit Minisini > >> > >> All described in previous message. > >> > >> create view test1 as select field_in_database from database_name where > >> field_in_database='some name that exist'; > >> > >> > >> return "no records" > >> Seconds time I try it give me > >> "Cannot exec request > >> Query failed: SQL error or missing database" > >> > >> First time when it returned no records. It should have return records. > >> The > >> view did not show up as a table that would be nice if it did. > >> > >> > >> Regards Rohnny > >> > >> My Gambas Community http://gambasforum.tk > > > > If you create twice the same view, it is logical that you get an error > > the second time, isn't it? > > > > -- > > Benoit Minisini > > I suppose it is ;) but why does the view not show up as a table, this way > you can see if it's there. Strange that it does not show any records > either. > > This is from a live table got from a demo project > create view test1 as select bfield from table1 where bfield='giraffe'; > Gives "NO RECORDS" > > select bfield from table1 where bfield='giraffe'; > This give me 10 records. There must be something wrong someplace. > > > Regards Rohnny > > My Gambas Community http://gambasforum.tk There is no view support in the database component, but normally, they should be accessible anyway. Need some investigation... -- Benoit Minisini From leonardo at ...1237... Sat Dec 29 16:11:38 2007 From: leonardo at ...1237... (Leonardo Miliani) Date: Sat, 29 Dec 2007 16:11:38 +0100 Subject: [Gambas-user] Maybe a bug in class Key of gb.gtk component Message-ID: <477663AA.2040205@...1237...> I'm using Gambas 1.9.92 on Ubuntu 7.10. I think I had discovered a little bug in class Key of gb.gtk component. If I try to get the code of a pressed key (using the keypress event) I get this error: "No keyboard event data". But if I build the same project with the gb.qt component, my code works fine. I can easily reproduce the bug creating a new GTK project and in the form right-click and choose "Event/KeyPress". After that, write in the event block this code: message (key.code) Now run it.... After that, open the Project/Properties from the menu, deselect the gb.gtk component, select the gb.qt, and try again. -- Ciao. Leo. Web: www.leonardomiliani.com E-mail: leonardo at ...1237... Scegli software opensource - Choose opensource software From leonardo at ...1237... Sat Dec 29 16:39:21 2007 From: leonardo at ...1237... (Leonardo Miliani) Date: Sat, 29 Dec 2007 16:39:21 +0100 Subject: [Gambas-user] Test Message-ID: <47766A29.4070905@...1237...> Test -- Ciao. Leo. Web: www.leonardomiliani.com E-mail: leonardo at ...1237... Scegli software opensource - Choose opensource software From leonardo at ...1237... Sat Dec 29 16:40:36 2007 From: leonardo at ...1237... (Leonardo Miliani) Date: Sat, 29 Dec 2007 16:40:36 +0100 Subject: [Gambas-user] How to use events with an object in object[]? Message-ID: <47766A74.5070009@...1237...> I'm writing a little program (a game using a chessboard and some pawns) and I would like to use a collection of PictureBoxes inside an Object[]. This is my code: PRIVATE BlackPawns AS NEW Object[] PRIVATE WithePawns AS NEW Object[] PRIVATE BlackPawn AS PictureBox PRIVATE WhitePawn AS PictureBox PUBLIC SUB _new() DIM varI AS Integer DIM varX AS Integer varX = 48 FOR varI = 0 TO 2 BlackPawn = NEW PictureBox(ME) BlackPawn = picture.Load(Application.Path & "/graphics/blackpawn.png") BlackPawn.BackColor = IIf((varI MOD 2) = 0, &h000000, &hffffff) BlackPawn.Name = "BlackPawn" & Trim(CStr(varI)) BlackPawn.X = varX BlackPawn.Y = 72 WhitePawn = NEW PictureBox(ME) WhitePawn.Picture = picture.Load(Application.Path & "/graphics/whitepawn.png") WhitePawn.BackColor = IIf((varI MOD 2) = 0, &h000000, &hffffff) WhitePawn.Name = "WhitePawn" & Trim(CStr(varI)) WhitePawn.X = varX WhitePawn.Y = 172 BlackPawns.Add(BlackPawn) WhitePawns.Add(WhitePawn) varX = varX + 50 NEXT END The pictureboxes are created, put inside the array Object[] and showed on the chessboard. Now I would like to manage the MouseDown event to change the picture of the selected pawn to show a different one that should mean I selected it. But I cannot manage them using the normal event methods... I mean that if I write a piece of code like this: PUBLIC SUB WhitePawns_MouseDown() LAST.picture = picture.Load(Application.Path & "/graphics/whitepawn_sel.png") END It doesn't do anything... -- Ciao. Leo. Web: www.leonardomiliani.com E-mail: leonardo at ...1237... Scegli software opensource - Choose opensource software From leonardo at ...1237... Sat Dec 29 16:41:35 2007 From: leonardo at ...1237... (Leonardo Miliani) Date: Sat, 29 Dec 2007 16:41:35 +0100 Subject: [Gambas-user] Test In-Reply-To: <47766A29.4070905@...1237...> References: <47766A29.4070905@...1237...> Message-ID: <47766AAF.6020204@...1237...> Leonardo Miliani ha scritto: > Test Sorry about this test but sometimes I get my messages bavk, rejected from the mailing list server... -- Ciao. Leo. Web: www.leonardomiliani.com E-mail: leonardo at ...1237... Scegli software opensource - Choose opensource software From lordheavym at ...626... Sat Dec 29 17:01:44 2007 From: lordheavym at ...626... (Laurent Carlier) Date: Sat, 29 Dec 2007 17:01:44 +0100 Subject: [Gambas-user] How to use events with an object in object[]? In-Reply-To: <47766A74.5070009@...1237...> References: <47766A74.5070009@...1237...> Message-ID: <200712291701.48395.lordheavym@...626...> Le Saturday 29 December 2007 16:40:36 Leonardo Miliani, vous avez ?crit?: > I'm writing a little program (a game using a chessboard and some pawns) > and I would like to use a collection of PictureBoxes inside an Object[]. > This is my code: > > PRIVATE BlackPawns AS NEW Object[] > PRIVATE WithePawns AS NEW Object[] > PRIVATE BlackPawn AS PictureBox > PRIVATE WhitePawn AS PictureBox > > PUBLIC SUB _new() > DIM varI AS Integer > DIM varX AS Integer > > varX = 48 > FOR varI = 0 TO 2 > BlackPawn = NEW PictureBox(ME) > BlackPawn = picture.Load(Application.Path & "/graphics/blackpawn.png") > BlackPawn.BackColor = IIf((varI MOD 2) = 0, &h000000, &hffffff) > BlackPawn.Name = "BlackPawn" & Trim(CStr(varI)) > BlackPawn.X = varX > BlackPawn.Y = 72 > WhitePawn = NEW PictureBox(ME) > WhitePawn.Picture = picture.Load(Application.Path & > "/graphics/whitepawn.png") > WhitePawn.BackColor = IIf((varI MOD 2) = 0, &h000000, &hffffff) > WhitePawn.Name = "WhitePawn" & Trim(CStr(varI)) > WhitePawn.X = varX > WhitePawn.Y = 172 > > BlackPawns.Add(BlackPawn) > WhitePawns.Add(WhitePawn) > varX = varX + 50 > NEXT > END > > The pictureboxes are created, put inside the array Object[] and showed > on the chessboard. Now I would like to manage the MouseDown event to > change the picture of the selected pawn to show a different one that > should mean I selected it. > > But I cannot manage them using the normal event methods... > I mean that if I write a piece of code like this: > > PUBLIC SUB WhitePawns_MouseDown() > > LAST.picture = picture.Load(Application.Path & > "/graphics/whitepawn_sel.png") > > END > > It doesn't do anything... You need to define the event handler name with the AS keyword http://64.128.110.55/help/lang/as eg: BlackPawn = NEW PictureBox(ME) AS "PawnBlack" so you got PUBLIC SUB PawnBlack_MouseDown() -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part. URL: From wspinto at ...1405... Sat Dec 29 23:16:53 2007 From: wspinto at ...1405... (Wellington de Souza Pinto) Date: Sat, 29 Dec 2007 20:16:53 -0200 Subject: [Gambas-user] happy 2008 for all In-Reply-To: References: Message-ID: <1198966613.4776c7553e9a0@...1825...> happy new year! nouvelle ann?e heureuse ! gl?ckliches neues Jahr! καλή χρονιά! nuovo anno felice! For All peoples of word Happy 2008. Souza, Wellington gambas user ___________________________________________________________________________________ Para fazer uma liga??o DDD pra perto ou pra longe, faz um 21. A Embratel tem tarifas muito baratas esperando por voc?. Aproveite! From leonardo at ...1237... Sun Dec 30 15:19:28 2007 From: leonardo at ...1237... (Leonardo Miliani) Date: Sun, 30 Dec 2007 15:19:28 +0100 Subject: [Gambas-user] happy 2008 for all In-Reply-To: <1198966613.4776c7553e9a0@...1825...> References: <1198966613.4776c7553e9a0@...1825...> Message-ID: <4777A8F0.6070307@...1237...> I would join these greetings to say everybody "HAPPY NEW YEAR" :-))) -- Ciao. Leo. Web: www.leonardomiliani.com E-mail: leonardo at ...1237... Scegli software opensource - Choose opensource software From leonardo at ...1237... Sun Dec 30 15:25:25 2007 From: leonardo at ...1237... (Leonardo Miliani) Date: Sun, 30 Dec 2007 15:25:25 +0100 Subject: [Gambas-user] How to use events with an object in object[]? In-Reply-To: <200712291701.48395.lordheavym@...626...> References: <47766A74.5070009@...1237...> <200712291701.48395.lordheavym@...626...> Message-ID: <4777AA55.5000201@...1237...> Laurent Carlier ha scritto: > You need to define the event handler name with the AS keyword > http://64.128.110.55/help/lang/as > > eg: > BlackPawn = NEW PictureBox(ME) AS "PawnBlack" > so you got > PUBLIC SUB PawnBlack_MouseDown() It works! Thanks a lot ;-) -- Ciao. Leo. Web: www.leonardomiliani.com E-mail: leonardo at ...1237... Scegli software opensource - Choose opensource software From gambas.fr at ...626... Sun Dec 30 16:40:56 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Sun, 30 Dec 2007 16:40:56 +0100 Subject: [Gambas-user] A surprise Message-ID: <200712301640.56485.gambas.fr@...626...> Finally my old project now working good, a cube in rotation mapped with the webcam output. In real times please ! Regards, Fabien Bodard -------------- next part -------------- A non-text attachment was scrubbed... Name: 3DWebCam-0.0.1.tar.gz Type: application/x-tgz Size: 89595 bytes Desc: not available URL: From gambas.fr at ...626... Sun Dec 30 16:42:50 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Sun, 30 Dec 2007 16:42:50 +0100 Subject: [Gambas-user] 3D webCam Message-ID: <200712301642.50882.gambas.fr@...626...> -------------- next part -------------- A non-text attachment was scrubbed... Name: capture41.png Type: image/png Size: 169762 bytes Desc: not available URL: From gambas.fr at ...626... Sun Dec 30 16:48:56 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Sun, 30 Dec 2007 16:48:56 +0100 Subject: [Gambas-user] A surprise Message-ID: <200712301648.56945.gambas.fr@...626...> Finally my old project now working good, a cube in rotation mapped with the webcam output. In real times please ! Regards, Fabien Bodard From gambas.fr at ...626... Sun Dec 30 16:49:16 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Sun, 30 Dec 2007 16:49:16 +0100 Subject: [Gambas-user] surprise Message-ID: <200712301649.17109.gambas.fr@...626...> oups -------------- next part -------------- A non-text attachment was scrubbed... Name: 3DWebCam-0.0.1.tar.gz Type: application/x-tgz Size: 89595 bytes Desc: not available URL: From francesco.difusco at ...69... Sun Dec 30 16:49:26 2007 From: francesco.difusco at ...69... (difusco_francesco@tiscali.it) Date: Sun, 30 Dec 2007 16:49:26 +0100 Subject: [Gambas-user] 3D webCam Message-ID: ---------- Initial Header ----------- >From : gambas-user-bounces at lists.sourceforge.net To : "mailing list for gambas users" gambas-user at ...48....net Cc : Date : Sun, 30 Dec 2007 16:42:50 +0100 Subject : [Gambas-user] 3D webCam If I only could use Gambas now :-( I have an AMD X2 64 bit and it is impossible to compile and run Gambas. Francesco From francesco.difusco at ...69... Sun Dec 30 16:52:20 2007 From: francesco.difusco at ...69... (difusco_francesco@tiscali.it) Date: Sun, 30 Dec 2007 16:52:20 +0100 Subject: [Gambas-user] surprise Message-ID: ---------- Initial Header ----------- >From : gambas-user-bounces at lists.sourceforge.net To : "mailing list for gambas users" gambas-user at ...48....net Cc : Date : Sun, 30 Dec 2007 16:49:16 +0100 Subject : [Gambas-user] surprise If I only could use Gambas now :-( I have an AMD X2 64 bit and it is impossible to compile and run Gambas. Francesco From gambas at ...1... Sun Dec 30 17:58:48 2007 From: gambas at ...1... (Benoit Minisini) Date: Sun, 30 Dec 2007 17:58:48 +0100 Subject: [Gambas-user] Subversion repository renaming Message-ID: <200712301758.48788.gambas@...1...> Hi, I have renamed the Gambas subversion directory. The old name is https://gambas.svn.sourceforge.net/svnroot/gambas/2.0/ The new name will be https://gambas.svn.sourceforge.net/svnroot/gambas/gambas/ You must upgrade your local repository, because things won't work anymore. To upgrade it, you have two solutions: 1) Delete the current one, and do a checkout again in a new directory. 2) Use the following command in your trunk directory: $ svn switch https://gambas.svn.sourceforge.net/svnroot/gambas/gambas/trunk Sorry for the inconvenience! Regards, -- Benoit Minisini From jredrejo at ...626... Sun Dec 30 18:07:42 2007 From: jredrejo at ...626... (=?ISO-8859-1?Q?Jos=E9_Luis_Redrejo?=) Date: Sun, 30 Dec 2007 18:07:42 +0100 Subject: [Gambas-user] Subversion repository renaming In-Reply-To: <200712301758.48788.gambas@...1...> References: <200712301758.48788.gambas@...1...> Message-ID: <8eb28a500712300907u1f1b5035n3df293a0c7ece18f@...627...> Does these changes mean that the final release of version 2.0 is very close? On the other hand, I would like to put some more "pressure" on you for version 3.0: gambas working with 64 bits is today a total need for the future and present of the language and for all of us who like to use it and everyday are being blocked with that barrier. In the gambas roadmap that should be the first item to be achieved in my opinion, and checking last emails in the list, there are a lot of people with the same need. So, here goes another vote for it. Merry christmas to you all. 2007/12/30, Benoit Minisini : > > Hi, > > I have renamed the Gambas subversion directory. > > The old name is https://gambas.svn.sourceforge.net/svnroot/gambas/2.0/ > The new name will be > https://gambas.svn.sourceforge.net/svnroot/gambas/gambas/ > > You must upgrade your local repository, because things won't work anymore. > To > upgrade it, you have two solutions: > > 1) Delete the current one, and do a checkout again in a new directory. > > 2) Use the following command in your trunk directory: > $ svn switch > https://gambas.svn.sourceforge.net/svnroot/gambas/gambas/trunk > > Sorry for the inconvenience! > > Regards, > > -- > Benoit Minisini > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > From gambas at ...1... Sun Dec 30 18:12:19 2007 From: gambas at ...1... (Benoit Minisini) Date: Sun, 30 Dec 2007 18:12:19 +0100 Subject: [Gambas-user] Subversion repository renaming In-Reply-To: <8eb28a500712300907u1f1b5035n3df293a0c7ece18f@...627...> References: <200712301758.48788.gambas@...1...> <8eb28a500712300907u1f1b5035n3df293a0c7ece18f@...627...> Message-ID: <200712301812.19290.gambas@...1...> On dimanche 30 d?cembre 2007, Jos? Luis Redrejo wrote: > Does these changes mean that the final release of version 2.0 is very > close? > > On the other hand, I would like to put some more "pressure" on you for > version 3.0: gambas working with 64 bits is today a total need for the > future and present of the language and for all of us who like to use it and > everyday are being blocked with that barrier. In the gambas roadmap that > should be the first item to be achieved in my opinion, and checking last > emails in the list, there are a lot of people with the same need. So, here > goes another vote for it. > > Merry christmas to you all. > As Gambas 1 were release a January, 1st, I find logical to release Gambas 2 January, 2th. :-) As for the 64 bits version, as it implies many changes in the interpreter, I had to release this version first, before starting to deal with it. And yes, it should be the first thing I will work on, but I can't tell how much time it will take. Regards, -- Benoit Minisini From gambas.fr at ...626... Sun Dec 30 18:19:53 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Sun, 30 Dec 2007 18:19:53 +0100 Subject: [Gambas-user] Subversion repository renaming In-Reply-To: <200712301812.19290.gambas@...1...> References: <200712301758.48788.gambas@...1...> <8eb28a500712300907u1f1b5035n3df293a0c7ece18f@...627...> <200712301812.19290.gambas@...1...> Message-ID: <200712301819.54387.gambas.fr@...626...> Le Sunday 30 December 2007 18:12:19 Benoit Minisini, vous avez ?crit?: > On dimanche 30 d?cembre 2007, Jos? Luis Redrejo wrote: > > Does these changes mean that the final release of version 2.0 is very > > close? > > > > On the other hand, I would like to put some more "pressure" on you for > > version 3.0: gambas working with 64 bits is today a total need for the > > future and present of the language and for all of us who like to use it > > and everyday are being blocked with that barrier. In the gambas roadmap > > that should be the first item to be achieved in my opinion, and checking > > last emails in the list, there are a lot of people with the same need. > > So, here goes another vote for it. > > > > Merry christmas to you all. > > As Gambas 1 were release a January, 1st, I find logical to release Gambas 2 > January, 2th. :-) > > As for the 64 bits version, as it implies many changes in the interpreter, > I had to release this version first, before starting to deal with it. > > And yes, it should be the first thing I will work on, but I can't tell how > much time it will take. i think we can count in month... > > Regards, From ron at ...1740... Sun Dec 30 18:26:39 2007 From: ron at ...1740... (Ron) Date: Sun, 30 Dec 2007 18:26:39 +0100 Subject: [Gambas-user] 3D webCam In-Reply-To: References: Message-ID: <4777D4CF.3020207@...1740...> difusco_francesco at ...152... schreef: > ---------- Initial Header ----------- > > >From : gambas-user-bounces at lists.sourceforge.net > To : "mailing list for gambas users" gambas-user at lists.sourceforge.net > Cc : > Date : Sun, 30 Dec 2007 16:42:50 +0100 > Subject : [Gambas-user] 3D webCam > > If I only could use Gambas now :-( > I have an AMD X2 64 bit and it is impossible to compile and run Gambas. > > > Francesco > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > Hi Francesco, Why not install a 64bits Xen-kernel, and an 32bits Linux in DomU. Then you have 2 computers in one. Regards, Ron. From sourceforge-raindog2 at ...94... Sun Dec 30 19:30:10 2007 From: sourceforge-raindog2 at ...94... (Rob) Date: Sun, 30 Dec 2007 13:30:10 -0500 Subject: [Gambas-user] Subversion repository renaming In-Reply-To: <8eb28a500712300907u1f1b5035n3df293a0c7ece18f@...627...> References: <200712301758.48788.gambas@...1...> <8eb28a500712300907u1f1b5035n3df293a0c7ece18f@...627...> Message-ID: <200712301330.10889.sourceforge-raindog2@...94...> On Sunday 30 December 2007 12:07, Jos? Luis Redrejo wrote: > On the other hand, I would like to put some more "pressure" on you > for version 3.0: gambas working with 64 bits is today a total need > for the future and present of the language and for all of us who > like to use it and everyday are being blocked with that barrier. In Yeah, my clients have 64-bit machines running 32-bit versions of Linux just because we have Gambas apps that need to run (and so do I), and it's getting near to where we're starting to consider 64-bit native alternatives just as we did 10 years ago when we started discarding DOS and Windows 3.1 apps. There are a lot of web servers running 64-bit Linux now, too, so if Gambas as a web platform is ever going to get off the ground, it's time to rip the band-aid off. I know there's a lot involved in making a bytecode interpreter 32- and 64-bit friendly, but I really think it needs to be done. Rob From francesco.difusco at ...69... Sun Dec 30 20:17:09 2007 From: francesco.difusco at ...69... (difusco_francesco@tiscali.it) Date: Sun, 30 Dec 2007 20:17:09 +0100 Subject: [Gambas-user] 3D webCam Message-ID: > Why not install a 64bits Xen-kernel, and an 32bits Linux in DomU. > Then you have 2 computers in one. What's a DomU ? Francesco From ron at ...1740... Sun Dec 30 20:40:40 2007 From: ron at ...1740... (Ron) Date: Sun, 30 Dec 2007 20:40:40 +0100 Subject: [Gambas-user] 64bits/32bits Xen (was 3D webCam) In-Reply-To: References: Message-ID: <4777F438.9080800@...1740...> difusco_francesco at ...152... wrote: >> Why not install a 64bits Xen-kernel, and an 32bits Linux in DomU. >> Then you have 2 computers in one. >> > > What's a DomU ? > > Francesco > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > A DomU is a guest OS running on a Host OS (which is called the Dom0) you can have more DomU's running at the same time of course. I run a webserver and a mailserver now on a Core2Quad, you can assign cpu's to a domU and how much memory it may use. I'll add a domotics and asterisk domU to it in the near future (although there are some issues with Asterisk hardware and timing/irq's.) Some distro's have better Xen support than others (I use CentOS 5.1 at the moment) regards, Ron. From francesco.difusco at ...69... Sun Dec 30 21:00:22 2007 From: francesco.difusco at ...69... (difusco_francesco@tiscali.it) Date: Sun, 30 Dec 2007 21:00:22 +0100 Subject: [Gambas-user] 64bits/32bits Xen (was 3D webCam) Message-ID: > A DomU is a guest OS running on a Host OS (which is called the Dom0) you > can have more DomU's running at the same time of course. > > I run a webserver and a mailserver now on a Core2Quad, you can assign > cpu's to a domU and how much memory it may use. > I'll add a domotics and asterisk domU to it in the near future (although > there are some issues with Asterisk hardware and timing/irq's.) > > Some distro's have better Xen support than others (I use CentOS 5.1 at > the moment) > Ok, I got it, thank you very much. I appreciate a lot your answer. Francesco From Karl.Reinl at ...9... Sun Dec 30 23:22:38 2007 From: Karl.Reinl at ...9... (Charlie Reinl) Date: Sun, 30 Dec 2007 23:22:38 +0100 Subject: [Gambas-user] Subversion repository renaming In-Reply-To: <200712301812.19290.gambas@...1...> References: <200712301758.48788.gambas@...1...> <8eb28a500712300907u1f1b5035n3df293a0c7ece18f@...627...> <200712301812.19290.gambas@...1...> Message-ID: <1199053358.5776.3.camel@...40...> Am Sonntag, den 30.12.2007, 18:12 +0100 schrieb Benoit Minisini: > On dimanche 30 d?cembre 2007, Jos? Luis Redrejo wrote: > > Does these changes mean that the final release of version 2.0 is very > > close? > > > > On the other hand, I would like to put some more "pressure" on you for > > version 3.0: gambas working with 64 bits is today a total need for the > > future and present of the language and for all of us who like to use it and > > everyday are being blocked with that barrier. In the gambas roadmap that > > should be the first item to be achieved in my opinion, and checking last > > emails in the list, there are a lot of people with the same need. So, here > > goes another vote for it. > > > > Merry christmas to you all. > > > > As Gambas 1 were release a January, 1st, I find logical to release Gambas 2 > January, 2th. :-) Et j'ai pens? ? la 22, mais s?rement, car il ya des probl?mes avec la version 3. And I thought of the 22, but surely there will be problems with the version 3. > As for the 64 bits version, as it implies many changes in the interpreter, I > had to release this version first, before starting to deal with it. > > And yes, it should be the first thing I will work on, but I can't tell how > much time it will take. > > Regards, > -- Amicalment Charlie From hennie at ...1826... Mon Dec 31 09:11:20 2007 From: hennie at ...1826... (gaupe) Date: Mon, 31 Dec 2007 00:11:20 -0800 (PST) Subject: [Gambas-user] help with xmlreader and retrieving attributes in xml file Message-ID: <14555253.post@...1379...> am trying to use the gb.xml component to read and write gpx files. theres not much documentation so i sort of tried error to write out an xml file which syntactic looks oke now ( i dont know if i use the right commands thoughh...) i can write a gpxfile with the following [code] PUBLIC SUB xmlwrite() DIM xml AS xmlwriter xml = NEW xmlwriter xml.Open("test.xml", TRUE, "UTF-8") xml.StartElement("gpx", ["xmlns", "http://www.topografix.com/GPX/1/1", "creator ", "My waypoint manager. ", "version", "0.001", "xmlns:xsi", "http://www.w3.org/2001/XMLSchema-instance", "xsi:schemaLocation", "http://www.garmin.com/xmlschemas/GpxExtensions/v3 " & "http://www.garmin.com/xmlschemas/GpxExtensions/v3/GpxExtensionsv3.xsd " & "http://www.topografix.com/GPX/1/1 " & "http://www.topografix.com/GPX/1/1/gpx.xsd"]) xml.Comment("******************************************") xml.StartElement("Metadata") xml.StartElement("Link", ["href", "http://www.garmin.com"]) xml.element("Text", "Garmin International") xml.EndElement() ' End Link xml.Element("Time", "2007-11-15T18:00:14Z") xml.StartElement("Bounds", ["maxlat", "62.1446255", "maxlon", "11.1915200", "minlat", "60.1419274", "minlon", "11.0752000"]) xml.EndElement() ' End Bounds xml.EndElement() ' End Metadata xml.Comment("******************************************") xml.StartElement("wpt", ["lat", "60.1419274", "lon", "11.1703764"]) xml.Element("ele", "202.000000") xml.Element("name", "Hamar ?stregate") xml.Element("cmt", "?stregate 14") xml.Element("desc", "?stregate 14") xml.Element("link", "http://www.harink.com/gmap/?lat=60.1419274&lon=11.1703764&width=500&height=500&zoom=12") xml.Element("sym", "Waypoint") xml.StartElement("Extensions") xml.StartElement("WaypointExtension",, "gpxx", "http://www.garmin.com/xmlschemas/GpxExtensions/v3") xml.Element("Proximity", "5000.00", "gpxx") xml.Element("Temperature", "10.000000", "gpxx") xml.Element("Depth", "120.00", "gpxx") xml.Element("DisplayMode", "SymbolAndNAme", "gpxx") xml.StartElement("Categories",, "gpxx") xml.Element("Category", "Category 7", "gpxx") xml.EndElement() ' End Category xml.EndElement() ' End Waypoint extension xml.EndElement() ' End Extensions xml.EndElement() ' End wpt xml.Comment("******************************************") xml.EndElement() ' End GPX xml.EndDocument() END [/code] But i cant quit figure out how to read it back with xmlreader class but in the printout i do not see the content of the attributes like bounds or lat lon any examples of how to retrieve the data back from an xml file? what i try is this [code] DIM xml AS NEW XmlReader xml.Open("test.xml") REPEAT PRINT 1; xml.Node.Attributes PRINT 11; xml.Node.Attributes.Count PRINT 2; xml.Node.BaseUri PRINT 3; xml.Node.Depth PRINT 4; xml.Node.IsDefault PRINT 5; xml.Node.IsEmptyElement PRINT 6; xml.Node.Name PRINT 7; xml.node.Prefix PRINT 8; xml.Node.QuoteChar PRINT 9; xml.Node.Type PRINT 10; xml.node.Value PRINT 11; xml.Node.XmlLang PRINT 12; xml.Node.NamespaceUri PRINT 13; xml.Node.LocalName PRINT 14; XmlNode.ElementNode PRINT "******************************************" xml.Read() UNTIL xml.eof [/code] -- View this message in context: http://www.nabble.com/help-with-xmlreader-and-retrieving-attributes-in-xml-file-tp14555253p14555253.html Sent from the gambas-user mailing list archive at Nabble.com. From gambas at ...1... Mon Dec 31 14:13:53 2007 From: gambas at ...1... (Benoit Minisini) Date: Mon, 31 Dec 2007 14:13:53 +0100 Subject: [Gambas-user] surprise In-Reply-To: <200712301649.17109.gambas.fr@...626...> References: <200712301649.17109.gambas.fr@...626...> Message-ID: <200712311413.53462.gambas@...1...> On dimanche 30 d?cembre 2007, Fabien Bodard wrote: > oups I added your project to the examples. -- Benoit Minisini From rospolosco at ...152... Mon Dec 31 15:14:24 2007 From: rospolosco at ...152... (Stefano Palmeri) Date: Mon, 31 Dec 2007 15:14:24 +0100 Subject: [Gambas-user] surprise In-Reply-To: <200712311413.53462.gambas@...1...> References: <200712301649.17109.gambas.fr@...626...> <200712311413.53462.gambas@...1...> Message-ID: <200712311514.24511.rospolosco@...152...> Alle 14:13, luned? 31 dicembre 2007, Benoit Minisini ha scritto: > On dimanche 30 d?cembre 2007, Fabien Bodard wrote: > > oups > > I added your project to the examples. Yesterday I tested Fabien 3Dwebcam (very intersting, Fabien!). I tested with an old webcam that doesn't accept resize 320x240 and so the project stopped working. So, I suggest to other people that experience that issue to change hWebcam.Resize(320, 240) with a supported size: hWebCam.Hue = 10 hWebCam.Color = 10 'hWebcam.Resize(320, 240) hWebcam.Resize(352, 288) Regards, Stefano Palmeri From gambas.fr at ...626... Mon Dec 31 15:34:40 2007 From: gambas.fr at ...626... (Fabien Bodard) Date: Mon, 31 Dec 2007 15:34:40 +0100 Subject: [Gambas-user] surprise In-Reply-To: <200712311514.24511.rospolosco@...152...> References: <200712301649.17109.gambas.fr@...626...> <200712311413.53462.gambas@...1...> <200712311514.24511.rospolosco@...152...> Message-ID: <200712311534.41349.gambas.fr@...626...> Le Monday 31 December 2007 15:14:24 Stefano Palmeri, vous avez ?crit?: > Alle 14:13, luned? 31 dicembre 2007, Benoit Minisini ha scritto: > > On dimanche 30 d?cembre 2007, Fabien Bodard wrote: > > > oups > > > > I added your project to the examples. > > Yesterday I tested Fabien 3Dwebcam (very intersting, Fabien!). > I tested with an old webcam that doesn't accept resize 320x240 and > so the project stopped working. So, I suggest to other people that > experience that issue to change hWebcam.Resize(320, 240) with a supported > size: > > hWebCam.Hue = 10 > hWebCam.Color = 10 > 'hWebcam.Resize(320, 240) > hWebcam.Resize(352, 288) > it is not a stable project... just a one shot program that run on my computer, this resolution was working with my webcam... not your ... it depend of the web cam > Regards, > > Stefano Palmeri > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user From rospolosco at ...152... Mon Dec 31 15:43:09 2007 From: rospolosco at ...152... (Stefano Palmeri) Date: Mon, 31 Dec 2007 15:43:09 +0100 Subject: [Gambas-user] surprise In-Reply-To: <200712311534.41349.gambas.fr@...626...> References: <200712301649.17109.gambas.fr@...626...> <200712311514.24511.rospolosco@...152...> <200712311534.41349.gambas.fr@...626...> Message-ID: <200712311543.09812.rospolosco@...152...> Alle 15:34, luned? 31 dicembre 2007, Fabien Bodard ha scritto: > Le Monday 31 December 2007 15:14:24 Stefano Palmeri, vous avez ?crit?: > > Alle 14:13, luned? 31 dicembre 2007, Benoit Minisini ha scritto: > > > On dimanche 30 d?cembre 2007, Fabien Bodard wrote: > > > > oups > > > > > > I added your project to the examples. > > > > Yesterday I tested Fabien 3Dwebcam (very intersting, Fabien!). > > I tested with an old webcam that doesn't accept resize 320x240 and > > so the project stopped working. So, I suggest to other people that > > experience that issue to change hWebcam.Resize(320, 240) with a supported > > size: > > > > hWebCam.Hue = 10 > > hWebCam.Color = 10 > > 'hWebcam.Resize(320, 240) > > hWebcam.Resize(352, 288) > > it is not a stable project... just a one shot program that run on my > computer, this resolution was working with my webcam... not your ... it > depend of the web cam > yes, yes... it's my webcam problem :-) I didn't want to criticize :-) or say anything negative. Excuse me if I was not clear. Ciao, Stefano > > Regards, > > > > Stefano Palmeri > > > > > > ------------------------------------------------------------------------- > > This SF.net email is sponsored by: Microsoft > > Defy all challenges. Microsoft(R) Visual Studio 2005. > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > > _______________________________________________ > > Gambas-user mailing list > > Gambas-user at lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/gambas-user > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Gambas-user mailing list > Gambas-user at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user From gambas at ...1... Mon Dec 31 15:45:05 2007 From: gambas at ...1... (Benoit Minisini) Date: Mon, 31 Dec 2007 15:45:05 +0100 Subject: [Gambas-user] surprise In-Reply-To: <200712311543.09812.rospolosco@...152...> References: <200712301649.17109.gambas.fr@...626...> <200712311534.41349.gambas.fr@...626...> <200712311543.09812.rospolosco@...152...> Message-ID: <200712311545.05233.gambas@...1...> On lundi 31 d?cembre 2007, Stefano Palmeri wrote: > Alle 15:34, luned? 31 dicembre 2007, Fabien Bodard ha scritto: > > Le Monday 31 December 2007 15:14:24 Stefano Palmeri, vous avez ?crit?: > > > Alle 14:13, luned? 31 dicembre 2007, Benoit Minisini ha scritto: > > > > On dimanche 30 d?cembre 2007, Fabien Bodard wrote: > > > > > oups > > > > > > > > I added your project to the examples. > > > > > > Yesterday I tested Fabien 3Dwebcam (very intersting, Fabien!). > > > I tested with an old webcam that doesn't accept resize 320x240 and > > > so the project stopped working. So, I suggest to other people that > > > experience that issue to change hWebcam.Resize(320, 240) with a > > > supported size: > > > > > > hWebCam.Hue = 10 > > > hWebCam.Color = 10 > > > 'hWebcam.Resize(320, 240) > > > hWebcam.Resize(352, 288) > > > > it is not a stable project... just a one shot program that run on my > > computer, this resolution was working with my webcam... not your ... it > > depend of the web cam > > yes, yes... it's my webcam problem :-) > > I didn't want to criticize :-) or say anything negative. Excuse me > if I was not clear. > > Ciao, > > Stefano > There is a VideoDevice.Features property, maybe you could use it to detect the maximum width and height supported by the webcam? -- Benoit Minisini