[Gambas-user] Using gambas to dial phone

[BertOudshoorn at ...1472...]

For Eldon Eller: Your note dated 2006-04-22. In fact, I have the same
wish: An internal Intel-536ep modem (in my case not on the motherboard
but a PCI card). Installed the related suse 10.0 rpm (even the new one)
but it does not work yet. However, not only gambas (the Serial Port
example), but also kppp and minicom do not see the modem.
Windows shows com3, irq 5, and I/O used. Looked at the modem-HowTo
site, and am trying several commands: 'lspci -v', 'setserial -g /dev/ttyS*',
'setserial /dev/ttyS2 port 0xdf00 irq 5', 'rm -f /dev/modem',
'ln -sv /dev/ttyS2 /dev/modem', 'wvdialconf my_config_file_name'... but
no modem detected.  Changed even in the bios the sound irq from 5 to 9.

Did you succeed? An external modem works well.
Bert Oudshoorn
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gambas-basic.org/pipermail/user/attachments/20060623/956dae7d/attachment.html>