[Gambas-user] direct printer port access

nando nando_f at ...1382...
Thu Apr 6 12:13:19 CEST 2006


My error.  I thought you meant Serial Port.
I have not yet met a CNC machine using Parallel.


---------- Original Message -----------
From: "nando" <nando_f at ...1382...>
To: gambas-user at lists.sourceforge.net
Sent: Thu, 6 Apr 2006 06:09:47 -0400
Subject: Re: [Gambas-user] direct printer port access

> I used the example for SERIAL PORT works.  Start there.
> I used it to do pin control and direct access for a unique serial device.
> Zero problems. Works terrific.
> -Fernando
> 
> ---------- Original Message -----------
> From: "Peter Moers" <peter.moers at ...626...>
> To: gambas-user at lists.sourceforge.net
> Sent: Thu, 6 Apr 2006 00:12:02 +0200
> Subject: [Gambas-user] direct printer port access
> 
> > hi,
> > I'm trying to get direct access to the printer port to control a CNC router.
> > This means I need to be able to set individual pins high and low. I've 
> > found some examples to print text to lp1 etc. but I didn't find a way 
> > to set/read the current state of the pins. Is this possible and if so how?
> > 
> > Regards,
> > 
> > --
> > Peter Moers
> > peter.moers at ...1417...
> > Divides Webdesign - http://www.divides.be
> > Startpagina - http://www.321start.be
> ------- End of Original Message -------
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by xPML, a groundbreaking scripting language
> that extends applications into web and mobile media. Attend the live webcast
> and join the prime developer group breaking into this new coding territory!
> http://sel.as-
> us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
_______________________________________________
> Gambas-user mailing list
> Gambas-user at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gambas-user
------- End of Original Message -------





More information about the User mailing list